blob: b6708bab7c53d5afae8b4cd5d4fb07450a1c92ed [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Intel INT0002 "Virtual GPIO" driver
*
* Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
*
* Loosely based on android x86 kernel code which is:
*
* Copyright (c) 2014, Intel Corporation.
*
* Author: Dyut Kumar Sil <dyut.k.sil@intel.com>
*
* Some peripherals on Bay Trail and Cherry Trail platforms signal a Power
* Management Event (PME) to the Power Management Controller (PMC) to wakeup
* the system. When this happens software needs to clear the PME bus 0 status
* bit in the GPE0a_STS register to avoid an IRQ storm on IRQ 9.
*
* This is modelled in ACPI through the INT0002 ACPI device, which is
* called a "Virtual GPIO controller" in ACPI because it defines the event
* handler to call when the PME triggers through _AEI and _L02 / _E02
* methods as would be done for a real GPIO interrupt in ACPI. Note this
* is a hack to define an AML event handler for the PME while using existing
* ACPI mechanisms, this is not a real GPIO at all.
*
* This driver will bind to the INT0002 device, and register as a GPIO
* controller, letting gpiolib-acpi.c call the _L02 handler as it would
* for a real GPIO controller.
*/
#include <linux/acpi.h>
#include <linux/bitmap.h>
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_data/x86/soc.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/suspend.h>
#define DRV_NAME "INT0002 Virtual GPIO"
/* For some reason the virtual GPIO pin tied to the GPE is numbered pin 2 */
#define GPE0A_PME_B0_VIRT_GPIO_PIN 2
#define GPE0A_PME_B0_STS_BIT BIT(13)
#define GPE0A_PME_B0_EN_BIT BIT(13)
#define GPE0A_STS_PORT 0x420
#define GPE0A_EN_PORT 0x428
struct int0002_data {
struct gpio_chip chip;
int parent_irq;
int wake_enable_count;
};
/*
* As this is not a real GPIO at all, but just a hack to model an event in
* ACPI the get / set functions are dummy functions.
*/
static int int0002_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
return 0;
}
static void int0002_gpio_set(struct gpio_chip *chip, unsigned int offset,
int value)
{
}
static int int0002_gpio_direction_output(struct gpio_chip *chip,
unsigned int offset, int value)
{
return 0;
}
static void int0002_irq_ack(struct irq_data *data)
{
outl(GPE0A_PME_B0_STS_BIT, GPE0A_STS_PORT);
}
static void int0002_irq_unmask(struct irq_data *data)
{
u32 gpe_en_reg;
gpe_en_reg = inl(GPE0A_EN_PORT);
gpe_en_reg |= GPE0A_PME_B0_EN_BIT;
outl(gpe_en_reg, GPE0A_EN_PORT);
}
static void int0002_irq_mask(struct irq_data *data)
{
u32 gpe_en_reg;
gpe_en_reg = inl(GPE0A_EN_PORT);
gpe_en_reg &= ~GPE0A_PME_B0_EN_BIT;
outl(gpe_en_reg, GPE0A_EN_PORT);
}
static int int0002_irq_set_wake(struct irq_data *data, unsigned int on)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct int0002_data *int0002 = container_of(chip, struct int0002_data, chip);
/*
* Applying of the wakeup flag to our parent IRQ is delayed till system
* suspend, because we only want to do this when using s2idle.
*/
if (on)
int0002->wake_enable_count++;
else
int0002->wake_enable_count--;
return 0;
}
static irqreturn_t int0002_irq(int irq, void *data)
{
struct gpio_chip *chip = data;
u32 gpe_sts_reg;
gpe_sts_reg = inl(GPE0A_STS_PORT);
if (!(gpe_sts_reg & GPE0A_PME_B0_STS_BIT))
return IRQ_NONE;
generic_handle_domain_irq_safe(chip->irq.domain, GPE0A_PME_B0_VIRT_GPIO_PIN);
pm_wakeup_hard_event(chip->parent);
return IRQ_HANDLED;
}
static bool int0002_check_wake(void *data)
{
u32 gpe_sts_reg;
gpe_sts_reg = inl(GPE0A_STS_PORT);
return (gpe_sts_reg & GPE0A_PME_B0_STS_BIT);
}
static struct irq_chip int0002_irqchip = {
.name = DRV_NAME,
.irq_ack = int0002_irq_ack,
.irq_mask = int0002_irq_mask,
.irq_unmask = int0002_irq_unmask,
.irq_set_wake = int0002_irq_set_wake,
};
static void int0002_init_irq_valid_mask(struct gpio_chip *chip,
unsigned long *valid_mask,
unsigned int ngpios)
{
bitmap_clear(valid_mask, 0, GPE0A_PME_B0_VIRT_GPIO_PIN);
}
static int int0002_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct int0002_data *int0002;
struct gpio_irq_chip *girq;
struct gpio_chip *chip;
int irq, ret;
/* Menlow has a different INT0002 device? <sigh> */
if (!soc_intel_is_byt() && !soc_intel_is_cht())
return -ENODEV;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
int0002 = devm_kzalloc(dev, sizeof(*int0002), GFP_KERNEL);
if (!int0002)
return -ENOMEM;
int0002->parent_irq = irq;
chip = &int0002->chip;
chip->label = DRV_NAME;
chip->parent = dev;
chip->owner = THIS_MODULE;
chip->get = int0002_gpio_get;
chip->set = int0002_gpio_set;
chip->direction_input = int0002_gpio_get;
chip->direction_output = int0002_gpio_direction_output;
chip->base = -1;
chip->ngpio = GPE0A_PME_B0_VIRT_GPIO_PIN + 1;
chip->irq.init_valid_mask = int0002_init_irq_valid_mask;
/*
* We directly request the irq here instead of passing a flow-handler
* to gpiochip_set_chained_irqchip, because the irq is shared.
* FIXME: augment this if we managed to pull handling of shared
* IRQs into gpiolib.
*/
ret = devm_request_irq(dev, irq, int0002_irq,
IRQF_SHARED, "INT0002", chip);
if (ret) {
dev_err(dev, "Error requesting IRQ %d: %d\n", irq, ret);
return ret;
}
girq = &chip->irq;
girq->chip = &int0002_irqchip;
/* This let us handle the parent IRQ in the driver */
girq->parent_handler = NULL;
girq->num_parents = 0;
girq->parents = NULL;
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_edge_irq;
ret = devm_gpiochip_add_data(dev, chip, NULL);
if (ret) {
dev_err(dev, "Error adding gpio chip: %d\n", ret);
return ret;
}
acpi_register_wakeup_handler(irq, int0002_check_wake, NULL);
device_init_wakeup(dev, true);
dev_set_drvdata(dev, int0002);
return 0;
}
static void int0002_remove(struct platform_device *pdev)
{
device_init_wakeup(&pdev->dev, false);
acpi_unregister_wakeup_handler(int0002_check_wake, NULL);
}
static int int0002_suspend(struct device *dev)
{
struct int0002_data *int0002 = dev_get_drvdata(dev);
/*
* The INT0002 parent IRQ is often shared with the ACPI GPE IRQ, don't
* muck with it when firmware based suspend is used, otherwise we may
* cause spurious wakeups from firmware managed suspend.
*/
if (!pm_suspend_via_firmware() && int0002->wake_enable_count)
enable_irq_wake(int0002->parent_irq);
return 0;
}
static int int0002_resume(struct device *dev)
{
struct int0002_data *int0002 = dev_get_drvdata(dev);
if (!pm_suspend_via_firmware() && int0002->wake_enable_count)
disable_irq_wake(int0002->parent_irq);
return 0;
}
static const struct dev_pm_ops int0002_pm_ops = {
.suspend = int0002_suspend,
.resume = int0002_resume,
};
static const struct acpi_device_id int0002_acpi_ids[] = {
{ "INT0002", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, int0002_acpi_ids);
static struct platform_driver int0002_driver = {
.driver = {
.name = DRV_NAME,
.acpi_match_table = int0002_acpi_ids,
.pm = &int0002_pm_ops,
},
.probe = int0002_probe,
.remove_new = int0002_remove,
};
module_platform_driver(int0002_driver);
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_DESCRIPTION("Intel INT0002 Virtual GPIO driver");
MODULE_LICENSE("GPL v2");