| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * STMicroelectronics accelerometers driver |
| * |
| * Copyright 2012-2013 STMicroelectronics Inc. |
| * |
| * Denis Ciocca <denis.ciocca@st.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/acpi.h> |
| #include <linux/i2c.h> |
| #include <linux/iio/iio.h> |
| |
| #include <linux/iio/common/st_sensors_i2c.h> |
| #include "st_accel.h" |
| |
| static const struct of_device_id st_accel_of_match[] = { |
| { |
| /* An older compatible */ |
| .compatible = "st,lis3lv02d", |
| .data = LIS3LV02DL_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lis3lv02dl-accel", |
| .data = LIS3LV02DL_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lsm303dlh-accel", |
| .data = LSM303DLH_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lsm303dlhc-accel", |
| .data = LSM303DLHC_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lis3dh-accel", |
| .data = LIS3DH_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lsm330d-accel", |
| .data = LSM330D_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lsm330dl-accel", |
| .data = LSM330DL_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lsm330dlc-accel", |
| .data = LSM330DLC_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lis331dl-accel", |
| .data = LIS331DL_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lis331dlh-accel", |
| .data = LIS331DLH_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lsm303dl-accel", |
| .data = LSM303DL_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lsm303dlm-accel", |
| .data = LSM303DLM_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lsm330-accel", |
| .data = LSM330_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lsm303agr-accel", |
| .data = LSM303AGR_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lis2dh12-accel", |
| .data = LIS2DH12_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,h3lis331dl-accel", |
| .data = H3LIS331DL_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lis3l02dq", |
| .data = LIS3L02DQ_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lng2dm-accel", |
| .data = LNG2DM_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lis2dw12", |
| .data = LIS2DW12_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lis3de", |
| .data = LIS3DE_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lis2de12", |
| .data = LIS2DE12_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "st,lis2hh12", |
| .data = LIS2HH12_ACCEL_DEV_NAME, |
| }, |
| { |
| .compatible = "silan,sc7a20", |
| .data = SC7A20_ACCEL_DEV_NAME, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, st_accel_of_match); |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id st_accel_acpi_match[] = { |
| {"SMO8840", (kernel_ulong_t)LIS2DH12_ACCEL_DEV_NAME}, |
| {"SMO8A90", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME}, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(acpi, st_accel_acpi_match); |
| #endif |
| |
| static const struct i2c_device_id st_accel_id_table[] = { |
| { LSM303DLH_ACCEL_DEV_NAME }, |
| { LSM303DLHC_ACCEL_DEV_NAME }, |
| { LIS3DH_ACCEL_DEV_NAME }, |
| { LSM330D_ACCEL_DEV_NAME }, |
| { LSM330DL_ACCEL_DEV_NAME }, |
| { LSM330DLC_ACCEL_DEV_NAME }, |
| { LIS331DLH_ACCEL_DEV_NAME }, |
| { LSM303DL_ACCEL_DEV_NAME }, |
| { LSM303DLM_ACCEL_DEV_NAME }, |
| { LSM330_ACCEL_DEV_NAME }, |
| { LSM303AGR_ACCEL_DEV_NAME }, |
| { LIS2DH12_ACCEL_DEV_NAME }, |
| { LIS3L02DQ_ACCEL_DEV_NAME }, |
| { LNG2DM_ACCEL_DEV_NAME }, |
| { H3LIS331DL_ACCEL_DEV_NAME }, |
| { LIS331DL_ACCEL_DEV_NAME }, |
| { LIS3LV02DL_ACCEL_DEV_NAME }, |
| { LIS2DW12_ACCEL_DEV_NAME }, |
| { LIS3DE_ACCEL_DEV_NAME }, |
| { LIS2DE12_ACCEL_DEV_NAME }, |
| { LIS2HH12_ACCEL_DEV_NAME }, |
| { SC7A20_ACCEL_DEV_NAME }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(i2c, st_accel_id_table); |
| |
| static int st_accel_i2c_probe(struct i2c_client *client) |
| { |
| const struct st_sensor_settings *settings; |
| struct st_sensor_data *adata; |
| struct iio_dev *indio_dev; |
| int ret; |
| |
| st_sensors_dev_name_probe(&client->dev, client->name, sizeof(client->name)); |
| |
| settings = st_accel_get_settings(client->name); |
| if (!settings) { |
| dev_err(&client->dev, "device name %s not recognized.\n", |
| client->name); |
| return -ENODEV; |
| } |
| |
| indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adata)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| adata = iio_priv(indio_dev); |
| adata->sensor_settings = (struct st_sensor_settings *)settings; |
| |
| ret = st_sensors_i2c_configure(indio_dev, client); |
| if (ret < 0) |
| return ret; |
| |
| ret = st_sensors_power_enable(indio_dev); |
| if (ret) |
| return ret; |
| |
| return st_accel_common_probe(indio_dev); |
| } |
| |
| static struct i2c_driver st_accel_driver = { |
| .driver = { |
| .name = "st-accel-i2c", |
| .of_match_table = st_accel_of_match, |
| .acpi_match_table = ACPI_PTR(st_accel_acpi_match), |
| }, |
| .probe_new = st_accel_i2c_probe, |
| .id_table = st_accel_id_table, |
| }; |
| module_i2c_driver(st_accel_driver); |
| |
| MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>"); |
| MODULE_DESCRIPTION("STMicroelectronics accelerometers i2c driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_IMPORT_NS(IIO_ST_SENSORS); |