| /* |
| * MPC86xx HPCN board specific routines |
| * |
| * Recode: ZHANG WEI <wei.zhang@freescale.com> |
| * Initial author: Xianghua Xiao <x.xiao@freescale.com> |
| * |
| * Copyright 2006 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/delay.h> |
| #include <linux/seq_file.h> |
| #include <linux/root_dev.h> |
| |
| #include <asm/system.h> |
| #include <asm/time.h> |
| #include <asm/machdep.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/mpc86xx.h> |
| #include <asm/prom.h> |
| #include <mm/mmu_decl.h> |
| #include <asm/udbg.h> |
| #include <asm/i8259.h> |
| |
| #include <asm/mpic.h> |
| |
| #include <sysdev/fsl_soc.h> |
| |
| #include "mpc86xx.h" |
| #include "mpc8641_hpcn.h" |
| |
| #undef DEBUG |
| |
| #ifdef DEBUG |
| #define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0) |
| #else |
| #define DBG(fmt...) do { } while(0) |
| #endif |
| |
| #ifndef CONFIG_PCI |
| unsigned long isa_io_base = 0; |
| unsigned long isa_mem_base = 0; |
| unsigned long pci_dram_offset = 0; |
| #endif |
| |
| |
| static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc, |
| struct pt_regs *regs) |
| { |
| unsigned int cascade_irq = i8259_irq(regs); |
| if (cascade_irq != NO_IRQ) |
| generic_handle_irq(cascade_irq, regs); |
| desc->chip->eoi(irq); |
| } |
| |
| void __init |
| mpc86xx_hpcn_init_irq(void) |
| { |
| struct mpic *mpic1; |
| struct device_node *np, *cascade_node = NULL; |
| int cascade_irq; |
| phys_addr_t openpic_paddr; |
| |
| np = of_find_node_by_type(NULL, "open-pic"); |
| if (np == NULL) |
| return; |
| |
| /* Determine the Physical Address of the OpenPIC regs */ |
| openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET; |
| |
| /* Alloc mpic structure and per isu has 16 INT entries. */ |
| mpic1 = mpic_alloc(np, openpic_paddr, |
| MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, |
| 16, NR_IRQS - 4, |
| " MPIC "); |
| BUG_ON(mpic1 == NULL); |
| |
| mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000); |
| |
| /* 48 Internal Interrupts */ |
| mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200); |
| mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400); |
| mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600); |
| |
| /* 16 External interrupts |
| * Moving them from [0 - 15] to [64 - 79] |
| */ |
| mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000); |
| |
| mpic_init(mpic1); |
| |
| #ifdef CONFIG_PCI |
| /* Initialize i8259 controller */ |
| for_each_node_by_type(np, "interrupt-controller") |
| if (device_is_compatible(np, "chrp,iic")) { |
| cascade_node = np; |
| break; |
| } |
| if (cascade_node == NULL) { |
| printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n"); |
| return; |
| } |
| |
| cascade_irq = irq_of_parse_and_map(cascade_node, 0); |
| if (cascade_irq == NO_IRQ) { |
| printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt"); |
| return; |
| } |
| DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq); |
| |
| i8259_init(cascade_node, 0); |
| set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade); |
| #endif |
| } |
| |
| #ifdef CONFIG_PCI |
| |
| enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH}; |
| const unsigned char uli1575_irq_route_table[16] = { |
| 0, /* 0: Reserved */ |
| 0x8, /* 1: 0b1000 */ |
| 0, /* 2: Reserved */ |
| 0x2, /* 3: 0b0010 */ |
| 0x4, /* 4: 0b0100 */ |
| 0x5, /* 5: 0b0101 */ |
| 0x7, /* 6: 0b0111 */ |
| 0x6, /* 7: 0b0110 */ |
| 0, /* 8: Reserved */ |
| 0x1, /* 9: 0b0001 */ |
| 0x3, /* 10: 0b0011 */ |
| 0x9, /* 11: 0b1001 */ |
| 0xb, /* 12: 0b1011 */ |
| 0, /* 13: Reserved */ |
| 0xd, /* 14, 0b1101 */ |
| 0xf, /* 15, 0b1111 */ |
| }; |
| |
| static int __devinit |
| get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) |
| { |
| struct of_irq oirq; |
| u32 laddr[3]; |
| struct device_node *hosenode = hose ? hose->arch_data : NULL; |
| |
| if (!hosenode) return -EINVAL; |
| |
| laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); |
| laddr[1] = laddr[2] = 0; |
| of_irq_map_raw(hosenode, &pin, laddr, &oirq); |
| DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n", |
| laddr[0], slot, pin, oirq.specifier[0]); |
| return oirq.specifier[0]; |
| } |
| |
| static void __devinit quirk_uli1575(struct pci_dev *dev) |
| { |
| unsigned short temp; |
| struct pci_controller *hose = pci_bus_to_host(dev->bus); |
| unsigned char irq2pin[16]; |
| unsigned long pirq_map_word = 0; |
| u32 irq; |
| int i; |
| |
| /* |
| * ULI1575 interrupts route setup |
| */ |
| memset(irq2pin, 0, 16); /* Initialize default value 0 */ |
| |
| /* |
| * PIRQA -> PIRQD mapping read from OF-tree |
| * |
| * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD |
| * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA |
| */ |
| for (i = 0; i < 4; i++){ |
| irq = get_pci_irq_from_of(hose, 17, i + 1); |
| if (irq > 0 && irq < 16) |
| irq2pin[irq] = PIRQA + i; |
| else |
| printk(KERN_WARNING "ULI1575 device" |
| "(slot %d, pin %d) irq %d is invalid.\n", |
| 17, i, irq); |
| } |
| |
| /* |
| * PIRQE -> PIRQF mapping set manually |
| * |
| * IRQ pin IRQ# |
| * PIRQE ---- 9 |
| * PIRQF ---- 10 |
| * PIRQG ---- 11 |
| * PIRQH ---- 12 |
| */ |
| for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i; |
| |
| /* Set IRQ-PIRQ Mapping to ULI1575 */ |
| for (i = 0; i < 16; i++) |
| if (irq2pin[i]) |
| pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) |
| << ((irq2pin[i] - PIRQA) * 4); |
| |
| /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ |
| DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", |
| pirq_map_word); |
| pci_write_config_dword(dev, 0x48, pirq_map_word); |
| |
| #define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ |
| do { \ |
| int irq; \ |
| irq = get_pci_irq_from_of(hose, slot, pin); \ |
| if (irq > 0 && irq < 16) \ |
| pci_write_config_byte(dev, reg, irq2pin[irq]); \ |
| else \ |
| printk(KERN_WARNING "ULI1575 device" \ |
| "(slot %d, pin %d) irq %d is invalid.\n", \ |
| slot, pin, irq); \ |
| } while(0) |
| |
| /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ |
| ULI1575_SET_DEV_IRQ(28, 1, 0x86); |
| |
| /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ |
| ULI1575_SET_DEV_IRQ(28, 2, 0x87); |
| |
| /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ |
| ULI1575_SET_DEV_IRQ(28, 3, 0x88); |
| |
| /* USB 2.0 controller, slot 28, pin 4 */ |
| irq = get_pci_irq_from_of(hose, 28, 4); |
| if (irq >= 0 && irq <=15) |
| pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); |
| |
| /* Audio controller, slot 29, pin 1 */ |
| ULI1575_SET_DEV_IRQ(29, 1, 0x8a); |
| |
| /* Modem controller, slot 29, pin 2 */ |
| ULI1575_SET_DEV_IRQ(29, 2, 0x8b); |
| |
| /* HD audio controller, slot 29, pin 3 */ |
| ULI1575_SET_DEV_IRQ(29, 3, 0x8c); |
| |
| /* SMB interrupt: slot 30, pin 1 */ |
| ULI1575_SET_DEV_IRQ(30, 1, 0x8e); |
| |
| /* PMU ACPI SCI interrupt: slot 30, pin 2 */ |
| ULI1575_SET_DEV_IRQ(30, 2, 0x8f); |
| |
| /* Serial ATA interrupt: slot 31, pin 1 */ |
| ULI1575_SET_DEV_IRQ(31, 1, 0x8d); |
| |
| /* Primary PATA IDE IRQ: 14 |
| * Secondary PATA IDE IRQ: 15 |
| */ |
| pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); |
| pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); |
| |
| /* Set IRQ14 and IRQ15 to legacy IRQs */ |
| pci_read_config_word(dev, 0x46, &temp); |
| temp |= 0xc000; |
| pci_write_config_word(dev, 0x46, temp); |
| |
| /* Set i8259 interrupt trigger |
| * IRQ 3: Level |
| * IRQ 4: Level |
| * IRQ 5: Level |
| * IRQ 6: Level |
| * IRQ 7: Level |
| * IRQ 9: Level |
| * IRQ 10: Level |
| * IRQ 11: Level |
| * IRQ 12: Level |
| * IRQ 14: Edge |
| * IRQ 15: Edge |
| */ |
| outb(0xfa, 0x4d0); |
| outb(0x1e, 0x4d1); |
| |
| #undef ULI1575_SET_DEV_IRQ |
| } |
| |
| static void __devinit quirk_uli5288(struct pci_dev *dev) |
| { |
| unsigned char c; |
| |
| pci_read_config_byte(dev,0x83,&c); |
| c |= 0x80; |
| pci_write_config_byte(dev, 0x83, c); |
| |
| pci_write_config_byte(dev, 0x09, 0x01); |
| pci_write_config_byte(dev, 0x0a, 0x06); |
| |
| pci_read_config_byte(dev,0x83,&c); |
| c &= 0x7f; |
| pci_write_config_byte(dev, 0x83, c); |
| |
| pci_read_config_byte(dev,0x84,&c); |
| c |= 0x01; |
| pci_write_config_byte(dev, 0x84, c); |
| } |
| |
| static void __devinit quirk_uli5229(struct pci_dev *dev) |
| { |
| unsigned short temp; |
| pci_write_config_word(dev, 0x04, 0x0405); |
| pci_read_config_word(dev, 0x4a, &temp); |
| temp |= 0x1000; |
| pci_write_config_word(dev, 0x4a, temp); |
| } |
| |
| static void __devinit early_uli5249(struct pci_dev *dev) |
| { |
| unsigned char temp; |
| pci_write_config_word(dev, 0x04, 0x0007); |
| pci_read_config_byte(dev, 0x7c, &temp); |
| pci_write_config_byte(dev, 0x7c, 0x80); |
| pci_write_config_byte(dev, 0x09, 0x01); |
| pci_write_config_byte(dev, 0x7c, temp); |
| dev->class |= 0x1; |
| } |
| |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); |
| #endif /* CONFIG_PCI */ |
| |
| |
| static void __init |
| mpc86xx_hpcn_setup_arch(void) |
| { |
| struct device_node *np; |
| |
| if (ppc_md.progress) |
| ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0); |
| |
| np = of_find_node_by_type(NULL, "cpu"); |
| if (np != 0) { |
| unsigned int *fp; |
| |
| fp = (int *)get_property(np, "clock-frequency", NULL); |
| if (fp != 0) |
| loops_per_jiffy = *fp / HZ; |
| else |
| loops_per_jiffy = 50000000 / HZ; |
| of_node_put(np); |
| } |
| |
| #ifdef CONFIG_PCI |
| for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) |
| add_bridge(np); |
| |
| ppc_md.pci_exclude_device = mpc86xx_exclude_device; |
| #endif |
| |
| printk("MPC86xx HPCN board from Freescale Semiconductor\n"); |
| |
| #ifdef CONFIG_ROOT_NFS |
| ROOT_DEV = Root_NFS; |
| #else |
| ROOT_DEV = Root_HDA1; |
| #endif |
| |
| #ifdef CONFIG_SMP |
| mpc86xx_smp_init(); |
| #endif |
| } |
| |
| |
| void |
| mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) |
| { |
| struct device_node *root; |
| uint memsize = total_memory; |
| const char *model = ""; |
| uint svid = mfspr(SPRN_SVR); |
| |
| seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); |
| |
| root = of_find_node_by_path("/"); |
| if (root) |
| model = get_property(root, "model", NULL); |
| seq_printf(m, "Machine\t\t: %s\n", model); |
| of_node_put(root); |
| |
| seq_printf(m, "SVR\t\t: 0x%x\n", svid); |
| seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); |
| } |
| |
| |
| void __init mpc86xx_hpcn_pcibios_fixup(void) |
| { |
| struct pci_dev *dev = NULL; |
| |
| for_each_pci_dev(dev) |
| pci_read_irq_line(dev); |
| } |
| |
| |
| /* |
| * Called very early, device-tree isn't unflattened |
| */ |
| static int __init mpc86xx_hpcn_probe(void) |
| { |
| unsigned long root = of_get_flat_dt_root(); |
| |
| if (of_flat_dt_is_compatible(root, "mpc86xx")) |
| return 1; /* Looks good */ |
| |
| return 0; |
| } |
| |
| |
| void |
| mpc86xx_restart(char *cmd) |
| { |
| void __iomem *rstcr; |
| |
| rstcr = ioremap(get_immrbase() + MPC86XX_RSTCR_OFFSET, 0x100); |
| |
| local_irq_disable(); |
| |
| /* Assert reset request to Reset Control Register */ |
| out_be32(rstcr, 0x2); |
| |
| /* not reached */ |
| } |
| |
| |
| long __init |
| mpc86xx_time_init(void) |
| { |
| unsigned int temp; |
| |
| /* Set the time base to zero */ |
| mtspr(SPRN_TBWL, 0); |
| mtspr(SPRN_TBWU, 0); |
| |
| temp = mfspr(SPRN_HID0); |
| temp |= HID0_TBEN; |
| mtspr(SPRN_HID0, temp); |
| asm volatile("isync"); |
| |
| return 0; |
| } |
| |
| |
| define_machine(mpc86xx_hpcn) { |
| .name = "MPC86xx HPCN", |
| .probe = mpc86xx_hpcn_probe, |
| .setup_arch = mpc86xx_hpcn_setup_arch, |
| .init_IRQ = mpc86xx_hpcn_init_irq, |
| .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo, |
| .pcibios_fixup = mpc86xx_hpcn_pcibios_fixup, |
| .get_irq = mpic_get_irq, |
| .restart = mpc86xx_restart, |
| .time_init = mpc86xx_time_init, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = udbg_progress, |
| }; |