| /* drivers/char/watchdog/scx200_wdt.c |
| |
| National Semiconductor SCx200 Watchdog support |
| |
| Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> |
| |
| Some code taken from: |
| National Semiconductor PC87307/PC97307 (ala SC1200) WDT driver |
| (c) Copyright 2002 Zwane Mwaikambo <zwane@commfireservices.com> |
| |
| This program is free software; you can redistribute it and/or |
| modify it under the terms of the GNU General Public License as |
| published by the Free Software Foundation; either version 2 of the |
| License, or (at your option) any later version. |
| |
| The author(s) of this software shall not be held liable for damages |
| of any nature resulting due to the use of this software. This |
| software is provided AS-IS with no warranties. */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/notifier.h> |
| #include <linux/reboot.h> |
| #include <linux/fs.h> |
| #include <linux/pci.h> |
| #include <linux/scx200.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| |
| #define NAME "scx200_wdt" |
| |
| MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>"); |
| MODULE_DESCRIPTION("NatSemi SCx200 Watchdog Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |
| |
| static int margin = 60; /* in seconds */ |
| module_param(margin, int, 0); |
| MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); |
| |
| static int nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, int, 0); |
| MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); |
| |
| static u16 wdto_restart; |
| static struct semaphore open_semaphore; |
| static char expect_close; |
| |
| /* Bits of the WDCNFG register */ |
| #define W_ENABLE 0x00fa /* Enable watchdog */ |
| #define W_DISABLE 0x0000 /* Disable watchdog */ |
| |
| /* The scaling factor for the timer, this depends on the value of W_ENABLE */ |
| #define W_SCALE (32768/1024) |
| |
| static void scx200_wdt_ping(void) |
| { |
| outw(wdto_restart, scx200_cb_base + SCx200_WDT_WDTO); |
| } |
| |
| static void scx200_wdt_update_margin(void) |
| { |
| printk(KERN_INFO NAME ": timer margin %d seconds\n", margin); |
| wdto_restart = margin * W_SCALE; |
| } |
| |
| static void scx200_wdt_enable(void) |
| { |
| printk(KERN_DEBUG NAME ": enabling watchdog timer, wdto_restart = %d\n", |
| wdto_restart); |
| |
| outw(0, scx200_cb_base + SCx200_WDT_WDTO); |
| outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS); |
| outw(W_ENABLE, scx200_cb_base + SCx200_WDT_WDCNFG); |
| |
| scx200_wdt_ping(); |
| } |
| |
| static void scx200_wdt_disable(void) |
| { |
| printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); |
| |
| outw(0, scx200_cb_base + SCx200_WDT_WDTO); |
| outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS); |
| outw(W_DISABLE, scx200_cb_base + SCx200_WDT_WDCNFG); |
| } |
| |
| static int scx200_wdt_open(struct inode *inode, struct file *file) |
| { |
| /* only allow one at a time */ |
| if (down_trylock(&open_semaphore)) |
| return -EBUSY; |
| scx200_wdt_enable(); |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static int scx200_wdt_release(struct inode *inode, struct file *file) |
| { |
| if (expect_close != 42) { |
| printk(KERN_WARNING NAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n"); |
| } else if (!nowayout) { |
| scx200_wdt_disable(); |
| } |
| expect_close = 0; |
| up(&open_semaphore); |
| |
| return 0; |
| } |
| |
| static int scx200_wdt_notify_sys(struct notifier_block *this, |
| unsigned long code, void *unused) |
| { |
| if (code == SYS_HALT || code == SYS_POWER_OFF) |
| if (!nowayout) |
| scx200_wdt_disable(); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block scx200_wdt_notifier = |
| { |
| .notifier_call = scx200_wdt_notify_sys, |
| }; |
| |
| static ssize_t scx200_wdt_write(struct file *file, const char __user *data, |
| size_t len, loff_t *ppos) |
| { |
| /* check for a magic close character */ |
| if (len) |
| { |
| size_t i; |
| |
| scx200_wdt_ping(); |
| |
| expect_close = 0; |
| for (i = 0; i < len; ++i) { |
| char c; |
| if (get_user(c, data+i)) |
| return -EFAULT; |
| if (c == 'V') |
| expect_close = 42; |
| } |
| |
| return len; |
| } |
| |
| return 0; |
| } |
| |
| static int scx200_wdt_ioctl(struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| static struct watchdog_info ident = { |
| .identity = "NatSemi SCx200 Watchdog", |
| .firmware_version = 1, |
| .options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING), |
| }; |
| int new_margin; |
| |
| switch (cmd) { |
| default: |
| return -ENOIOCTLCMD; |
| case WDIOC_GETSUPPORT: |
| if(copy_to_user(argp, &ident, sizeof(ident))) |
| return -EFAULT; |
| return 0; |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| if (put_user(0, p)) |
| return -EFAULT; |
| return 0; |
| case WDIOC_KEEPALIVE: |
| scx200_wdt_ping(); |
| return 0; |
| case WDIOC_SETTIMEOUT: |
| if (get_user(new_margin, p)) |
| return -EFAULT; |
| if (new_margin < 1) |
| return -EINVAL; |
| margin = new_margin; |
| scx200_wdt_update_margin(); |
| scx200_wdt_ping(); |
| case WDIOC_GETTIMEOUT: |
| if (put_user(margin, p)) |
| return -EFAULT; |
| return 0; |
| } |
| } |
| |
| static const struct file_operations scx200_wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = scx200_wdt_write, |
| .ioctl = scx200_wdt_ioctl, |
| .open = scx200_wdt_open, |
| .release = scx200_wdt_release, |
| }; |
| |
| static struct miscdevice scx200_wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &scx200_wdt_fops, |
| }; |
| |
| static int __init scx200_wdt_init(void) |
| { |
| int r; |
| |
| printk(KERN_DEBUG NAME ": NatSemi SCx200 Watchdog Driver\n"); |
| |
| /* check that we have found the configuration block */ |
| if (!scx200_cb_present()) |
| return -ENODEV; |
| |
| if (!request_region(scx200_cb_base + SCx200_WDT_OFFSET, |
| SCx200_WDT_SIZE, |
| "NatSemi SCx200 Watchdog")) { |
| printk(KERN_WARNING NAME ": watchdog I/O region busy\n"); |
| return -EBUSY; |
| } |
| |
| scx200_wdt_update_margin(); |
| scx200_wdt_disable(); |
| |
| sema_init(&open_semaphore, 1); |
| |
| r = misc_register(&scx200_wdt_miscdev); |
| if (r) { |
| release_region(scx200_cb_base + SCx200_WDT_OFFSET, |
| SCx200_WDT_SIZE); |
| return r; |
| } |
| |
| r = register_reboot_notifier(&scx200_wdt_notifier); |
| if (r) { |
| printk(KERN_ERR NAME ": unable to register reboot notifier"); |
| misc_deregister(&scx200_wdt_miscdev); |
| release_region(scx200_cb_base + SCx200_WDT_OFFSET, |
| SCx200_WDT_SIZE); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit scx200_wdt_cleanup(void) |
| { |
| unregister_reboot_notifier(&scx200_wdt_notifier); |
| misc_deregister(&scx200_wdt_miscdev); |
| release_region(scx200_cb_base + SCx200_WDT_OFFSET, |
| SCx200_WDT_SIZE); |
| } |
| |
| module_init(scx200_wdt_init); |
| module_exit(scx200_wdt_cleanup); |
| |
| /* |
| Local variables: |
| compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules" |
| c-basic-offset: 8 |
| End: |
| */ |