| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * cxd2880-spi.c |
| * Sony CXD2880 DVB-T2/T tuner + demodulator driver |
| * SPI adapter |
| * |
| * Copyright (C) 2016, 2017, 2018 Sony Semiconductor Solutions Corporation |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__ |
| |
| #include <linux/spi/spi.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/ktime.h> |
| |
| #include <media/dvb_demux.h> |
| #include <media/dmxdev.h> |
| #include <media/dvb_frontend.h> |
| #include "cxd2880.h" |
| |
| #define CXD2880_MAX_FILTER_SIZE 32 |
| #define BURST_WRITE_MAX 128 |
| #define MAX_TRANS_PKT 300 |
| |
| struct cxd2880_ts_buf_info { |
| u8 read_ready:1; |
| u8 almost_full:1; |
| u8 almost_empty:1; |
| u8 overflow:1; |
| u8 underflow:1; |
| u16 pkt_num; |
| }; |
| |
| struct cxd2880_pid_config { |
| u8 is_enable; |
| u16 pid; |
| }; |
| |
| struct cxd2880_pid_filter_config { |
| u8 is_negative; |
| struct cxd2880_pid_config pid_config[CXD2880_MAX_FILTER_SIZE]; |
| }; |
| |
| struct cxd2880_dvb_spi { |
| struct dvb_frontend dvb_fe; |
| struct dvb_adapter adapter; |
| struct dvb_demux demux; |
| struct dmxdev dmxdev; |
| struct dmx_frontend dmx_fe; |
| struct task_struct *cxd2880_ts_read_thread; |
| struct spi_device *spi; |
| struct mutex spi_mutex; /* For SPI access exclusive control */ |
| int feed_count; |
| int all_pid_feed_count; |
| struct regulator *vcc_supply; |
| u8 *ts_buf; |
| struct cxd2880_pid_filter_config filter_config; |
| }; |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| static int cxd2880_write_spi(struct spi_device *spi, u8 *data, u32 size) |
| { |
| struct spi_message msg; |
| struct spi_transfer tx = {}; |
| |
| if (!spi || !data) { |
| pr_err("invalid arg\n"); |
| return -EINVAL; |
| } |
| |
| tx.tx_buf = data; |
| tx.len = size; |
| |
| spi_message_init(&msg); |
| spi_message_add_tail(&tx, &msg); |
| |
| return spi_sync(spi, &msg); |
| } |
| |
| static int cxd2880_write_reg(struct spi_device *spi, |
| u8 sub_address, const u8 *data, u32 size) |
| { |
| u8 send_data[BURST_WRITE_MAX + 4]; |
| const u8 *write_data_top = NULL; |
| int ret = 0; |
| |
| if (!spi || !data) { |
| pr_err("invalid arg\n"); |
| return -EINVAL; |
| } |
| if (size > BURST_WRITE_MAX || size > U8_MAX) { |
| pr_err("data size > WRITE_MAX\n"); |
| return -EINVAL; |
| } |
| |
| if (sub_address + size > 0x100) { |
| pr_err("out of range\n"); |
| return -EINVAL; |
| } |
| |
| send_data[0] = 0x0e; |
| write_data_top = data; |
| |
| send_data[1] = sub_address; |
| send_data[2] = (u8)size; |
| |
| memcpy(&send_data[3], write_data_top, send_data[2]); |
| |
| ret = cxd2880_write_spi(spi, send_data, send_data[2] + 3); |
| if (ret) |
| pr_err("write spi failed %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int cxd2880_spi_read_ts(struct spi_device *spi, |
| u8 *read_data, |
| u32 packet_num) |
| { |
| int ret; |
| u8 data[3]; |
| struct spi_message message; |
| struct spi_transfer transfer[2] = {}; |
| |
| if (!spi || !read_data || !packet_num) { |
| pr_err("invalid arg\n"); |
| return -EINVAL; |
| } |
| if (packet_num > 0xffff) { |
| pr_err("packet num > 0xffff\n"); |
| return -EINVAL; |
| } |
| |
| data[0] = 0x10; |
| data[1] = packet_num >> 8; |
| data[2] = packet_num; |
| |
| spi_message_init(&message); |
| |
| transfer[0].len = 3; |
| transfer[0].tx_buf = data; |
| spi_message_add_tail(&transfer[0], &message); |
| transfer[1].len = packet_num * 188; |
| transfer[1].rx_buf = read_data; |
| spi_message_add_tail(&transfer[1], &message); |
| |
| ret = spi_sync(spi, &message); |
| if (ret) |
| pr_err("spi_sync failed\n"); |
| |
| return ret; |
| } |
| |
| static int cxd2880_spi_read_ts_buffer_info(struct spi_device *spi, |
| struct cxd2880_ts_buf_info *info) |
| { |
| u8 send_data = 0x20; |
| u8 recv_data[2]; |
| int ret; |
| |
| if (!spi || !info) { |
| pr_err("invalid arg\n"); |
| return -EINVAL; |
| } |
| |
| ret = spi_write_then_read(spi, &send_data, 1, |
| recv_data, sizeof(recv_data)); |
| if (ret) |
| pr_err("spi_write_then_read failed\n"); |
| |
| info->read_ready = (recv_data[0] & 0x80) ? 1 : 0; |
| info->almost_full = (recv_data[0] & 0x40) ? 1 : 0; |
| info->almost_empty = (recv_data[0] & 0x20) ? 1 : 0; |
| info->overflow = (recv_data[0] & 0x10) ? 1 : 0; |
| info->underflow = (recv_data[0] & 0x08) ? 1 : 0; |
| info->pkt_num = ((recv_data[0] & 0x07) << 8) | recv_data[1]; |
| |
| return ret; |
| } |
| |
| static int cxd2880_spi_clear_ts_buffer(struct spi_device *spi) |
| { |
| u8 data = 0x03; |
| int ret; |
| |
| ret = cxd2880_write_spi(spi, &data, 1); |
| |
| if (ret) |
| pr_err("write spi failed\n"); |
| |
| return ret; |
| } |
| |
| static int cxd2880_set_pid_filter(struct spi_device *spi, |
| struct cxd2880_pid_filter_config *cfg) |
| { |
| u8 data[65]; |
| int i; |
| u16 pid = 0; |
| int ret; |
| |
| if (!spi) { |
| pr_err("invalid arg\n"); |
| return -EINVAL; |
| } |
| |
| data[0] = 0x00; |
| ret = cxd2880_write_reg(spi, 0x00, &data[0], 1); |
| if (ret) |
| return ret; |
| if (!cfg) { |
| data[0] = 0x02; |
| ret = cxd2880_write_reg(spi, 0x50, &data[0], 1); |
| } else { |
| data[0] = cfg->is_negative ? 0x01 : 0x00; |
| |
| for (i = 0; i < CXD2880_MAX_FILTER_SIZE; i++) { |
| pid = cfg->pid_config[i].pid; |
| if (cfg->pid_config[i].is_enable) { |
| data[1 + (i * 2)] = (pid >> 8) | 0x20; |
| data[2 + (i * 2)] = pid & 0xff; |
| } else { |
| data[1 + (i * 2)] = 0x00; |
| data[2 + (i * 2)] = 0x00; |
| } |
| } |
| ret = cxd2880_write_reg(spi, 0x50, data, 65); |
| } |
| |
| return ret; |
| } |
| |
| static int cxd2880_update_pid_filter(struct cxd2880_dvb_spi *dvb_spi, |
| struct cxd2880_pid_filter_config *cfg, |
| bool is_all_pid_filter) |
| { |
| int ret; |
| |
| if (!dvb_spi || !cfg) { |
| pr_err("invalid arg.\n"); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&dvb_spi->spi_mutex); |
| if (is_all_pid_filter) { |
| struct cxd2880_pid_filter_config tmpcfg; |
| |
| memset(&tmpcfg, 0, sizeof(tmpcfg)); |
| tmpcfg.is_negative = 1; |
| tmpcfg.pid_config[0].is_enable = 1; |
| tmpcfg.pid_config[0].pid = 0x1fff; |
| |
| ret = cxd2880_set_pid_filter(dvb_spi->spi, &tmpcfg); |
| } else { |
| ret = cxd2880_set_pid_filter(dvb_spi->spi, cfg); |
| } |
| mutex_unlock(&dvb_spi->spi_mutex); |
| |
| if (ret) |
| pr_err("set_pid_filter failed\n"); |
| |
| return ret; |
| } |
| |
| static int cxd2880_ts_read(void *arg) |
| { |
| struct cxd2880_dvb_spi *dvb_spi = NULL; |
| struct cxd2880_ts_buf_info info; |
| ktime_t start; |
| u32 i; |
| int ret; |
| |
| dvb_spi = arg; |
| if (!dvb_spi) { |
| pr_err("invalid arg\n"); |
| return -EINVAL; |
| } |
| |
| ret = cxd2880_spi_clear_ts_buffer(dvb_spi->spi); |
| if (ret) { |
| pr_err("set_clear_ts_buffer failed\n"); |
| return ret; |
| } |
| |
| start = ktime_get(); |
| while (!kthread_should_stop()) { |
| ret = cxd2880_spi_read_ts_buffer_info(dvb_spi->spi, |
| &info); |
| if (ret) { |
| pr_err("spi_read_ts_buffer_info error\n"); |
| return ret; |
| } |
| |
| if (info.pkt_num > MAX_TRANS_PKT) { |
| for (i = 0; i < info.pkt_num / MAX_TRANS_PKT; i++) { |
| cxd2880_spi_read_ts(dvb_spi->spi, |
| dvb_spi->ts_buf, |
| MAX_TRANS_PKT); |
| dvb_dmx_swfilter(&dvb_spi->demux, |
| dvb_spi->ts_buf, |
| MAX_TRANS_PKT * 188); |
| } |
| start = ktime_get(); |
| } else if ((info.pkt_num > 0) && |
| (ktime_to_ms(ktime_sub(ktime_get(), start)) >= 500)) { |
| cxd2880_spi_read_ts(dvb_spi->spi, |
| dvb_spi->ts_buf, |
| info.pkt_num); |
| dvb_dmx_swfilter(&dvb_spi->demux, |
| dvb_spi->ts_buf, |
| info.pkt_num * 188); |
| start = ktime_get(); |
| } else { |
| usleep_range(10000, 11000); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int cxd2880_start_feed(struct dvb_demux_feed *feed) |
| { |
| int ret = 0; |
| int i = 0; |
| struct dvb_demux *demux = NULL; |
| struct cxd2880_dvb_spi *dvb_spi = NULL; |
| |
| if (!feed) { |
| pr_err("invalid arg\n"); |
| return -EINVAL; |
| } |
| |
| demux = feed->demux; |
| if (!demux) { |
| pr_err("feed->demux is NULL\n"); |
| return -EINVAL; |
| } |
| dvb_spi = demux->priv; |
| |
| if (dvb_spi->feed_count == CXD2880_MAX_FILTER_SIZE) { |
| pr_err("Exceeded maximum PID count (32)."); |
| pr_err("Selected PID cannot be enabled.\n"); |
| return -EINVAL; |
| } |
| |
| if (feed->pid == 0x2000) { |
| if (dvb_spi->all_pid_feed_count == 0) { |
| ret = cxd2880_update_pid_filter(dvb_spi, |
| &dvb_spi->filter_config, |
| true); |
| if (ret) { |
| pr_err("update pid filter failed\n"); |
| return ret; |
| } |
| } |
| dvb_spi->all_pid_feed_count++; |
| |
| pr_debug("all PID feed (count = %d)\n", |
| dvb_spi->all_pid_feed_count); |
| } else { |
| struct cxd2880_pid_filter_config cfgtmp; |
| |
| cfgtmp = dvb_spi->filter_config; |
| |
| for (i = 0; i < CXD2880_MAX_FILTER_SIZE; i++) { |
| if (cfgtmp.pid_config[i].is_enable == 0) { |
| cfgtmp.pid_config[i].is_enable = 1; |
| cfgtmp.pid_config[i].pid = feed->pid; |
| pr_debug("store PID %d to #%d\n", |
| feed->pid, i); |
| break; |
| } |
| } |
| if (i == CXD2880_MAX_FILTER_SIZE) { |
| pr_err("PID filter is full.\n"); |
| return -EINVAL; |
| } |
| if (!dvb_spi->all_pid_feed_count) |
| ret = cxd2880_update_pid_filter(dvb_spi, |
| &cfgtmp, |
| false); |
| if (ret) |
| return ret; |
| |
| dvb_spi->filter_config = cfgtmp; |
| } |
| |
| if (dvb_spi->feed_count == 0) { |
| dvb_spi->ts_buf = |
| kmalloc(MAX_TRANS_PKT * 188, |
| GFP_KERNEL | GFP_DMA); |
| if (!dvb_spi->ts_buf) { |
| pr_err("ts buffer allocate failed\n"); |
| memset(&dvb_spi->filter_config, 0, |
| sizeof(dvb_spi->filter_config)); |
| dvb_spi->all_pid_feed_count = 0; |
| return -ENOMEM; |
| } |
| dvb_spi->cxd2880_ts_read_thread = kthread_run(cxd2880_ts_read, |
| dvb_spi, |
| "cxd2880_ts_read"); |
| if (IS_ERR(dvb_spi->cxd2880_ts_read_thread)) { |
| pr_err("kthread_run failed\n"); |
| kfree(dvb_spi->ts_buf); |
| dvb_spi->ts_buf = NULL; |
| memset(&dvb_spi->filter_config, 0, |
| sizeof(dvb_spi->filter_config)); |
| dvb_spi->all_pid_feed_count = 0; |
| return PTR_ERR(dvb_spi->cxd2880_ts_read_thread); |
| } |
| } |
| |
| dvb_spi->feed_count++; |
| |
| pr_debug("start feed (count %d)\n", dvb_spi->feed_count); |
| return 0; |
| } |
| |
| static int cxd2880_stop_feed(struct dvb_demux_feed *feed) |
| { |
| int i = 0; |
| int ret; |
| struct dvb_demux *demux = NULL; |
| struct cxd2880_dvb_spi *dvb_spi = NULL; |
| |
| if (!feed) { |
| pr_err("invalid arg\n"); |
| return -EINVAL; |
| } |
| |
| demux = feed->demux; |
| if (!demux) { |
| pr_err("feed->demux is NULL\n"); |
| return -EINVAL; |
| } |
| dvb_spi = demux->priv; |
| |
| if (!dvb_spi->feed_count) { |
| pr_err("no feed is started\n"); |
| return -EINVAL; |
| } |
| |
| if (feed->pid == 0x2000) { |
| /* |
| * Special PID case. |
| * Number of 0x2000 feed request was stored |
| * in dvb_spi->all_pid_feed_count. |
| */ |
| if (dvb_spi->all_pid_feed_count <= 0) { |
| pr_err("PID %d not found\n", feed->pid); |
| return -EINVAL; |
| } |
| dvb_spi->all_pid_feed_count--; |
| } else { |
| struct cxd2880_pid_filter_config cfgtmp; |
| |
| cfgtmp = dvb_spi->filter_config; |
| |
| for (i = 0; i < CXD2880_MAX_FILTER_SIZE; i++) { |
| if (feed->pid == cfgtmp.pid_config[i].pid && |
| cfgtmp.pid_config[i].is_enable != 0) { |
| cfgtmp.pid_config[i].is_enable = 0; |
| cfgtmp.pid_config[i].pid = 0; |
| pr_debug("removed PID %d from #%d\n", |
| feed->pid, i); |
| break; |
| } |
| } |
| dvb_spi->filter_config = cfgtmp; |
| |
| if (i == CXD2880_MAX_FILTER_SIZE) { |
| pr_err("PID %d not found\n", feed->pid); |
| return -EINVAL; |
| } |
| } |
| |
| ret = cxd2880_update_pid_filter(dvb_spi, |
| &dvb_spi->filter_config, |
| dvb_spi->all_pid_feed_count > 0); |
| dvb_spi->feed_count--; |
| |
| if (dvb_spi->feed_count == 0) { |
| int ret_stop = 0; |
| |
| ret_stop = kthread_stop(dvb_spi->cxd2880_ts_read_thread); |
| if (ret_stop) { |
| pr_err("kthread_stop failed. (%d)\n", ret_stop); |
| ret = ret_stop; |
| } |
| kfree(dvb_spi->ts_buf); |
| dvb_spi->ts_buf = NULL; |
| } |
| |
| pr_debug("stop feed ok.(count %d)\n", dvb_spi->feed_count); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id cxd2880_spi_of_match[] = { |
| { .compatible = "sony,cxd2880" }, |
| { /* sentinel */ } |
| }; |
| |
| MODULE_DEVICE_TABLE(of, cxd2880_spi_of_match); |
| |
| static int |
| cxd2880_spi_probe(struct spi_device *spi) |
| { |
| int ret; |
| struct cxd2880_dvb_spi *dvb_spi = NULL; |
| struct cxd2880_config config; |
| |
| if (!spi) { |
| pr_err("invalid arg\n"); |
| return -EINVAL; |
| } |
| |
| dvb_spi = kzalloc(sizeof(struct cxd2880_dvb_spi), GFP_KERNEL); |
| if (!dvb_spi) |
| return -ENOMEM; |
| |
| dvb_spi->vcc_supply = devm_regulator_get_optional(&spi->dev, "vcc"); |
| if (IS_ERR(dvb_spi->vcc_supply)) { |
| if (PTR_ERR(dvb_spi->vcc_supply) == -EPROBE_DEFER) { |
| ret = -EPROBE_DEFER; |
| goto fail_adapter; |
| } |
| dvb_spi->vcc_supply = NULL; |
| } else { |
| ret = regulator_enable(dvb_spi->vcc_supply); |
| if (ret) |
| goto fail_adapter; |
| } |
| |
| dvb_spi->spi = spi; |
| mutex_init(&dvb_spi->spi_mutex); |
| spi_set_drvdata(spi, dvb_spi); |
| config.spi = spi; |
| config.spi_mutex = &dvb_spi->spi_mutex; |
| |
| ret = dvb_register_adapter(&dvb_spi->adapter, |
| "CXD2880", |
| THIS_MODULE, |
| &spi->dev, |
| adapter_nr); |
| if (ret < 0) { |
| pr_err("dvb_register_adapter() failed\n"); |
| goto fail_adapter; |
| } |
| |
| if (!dvb_attach(cxd2880_attach, &dvb_spi->dvb_fe, &config)) { |
| pr_err("cxd2880_attach failed\n"); |
| ret = -ENODEV; |
| goto fail_attach; |
| } |
| |
| ret = dvb_register_frontend(&dvb_spi->adapter, |
| &dvb_spi->dvb_fe); |
| if (ret < 0) { |
| pr_err("dvb_register_frontend() failed\n"); |
| goto fail_frontend; |
| } |
| |
| dvb_spi->demux.dmx.capabilities = DMX_TS_FILTERING; |
| dvb_spi->demux.priv = dvb_spi; |
| dvb_spi->demux.filternum = CXD2880_MAX_FILTER_SIZE; |
| dvb_spi->demux.feednum = CXD2880_MAX_FILTER_SIZE; |
| dvb_spi->demux.start_feed = cxd2880_start_feed; |
| dvb_spi->demux.stop_feed = cxd2880_stop_feed; |
| |
| ret = dvb_dmx_init(&dvb_spi->demux); |
| if (ret < 0) { |
| pr_err("dvb_dmx_init() failed\n"); |
| goto fail_dmx; |
| } |
| |
| dvb_spi->dmxdev.filternum = CXD2880_MAX_FILTER_SIZE; |
| dvb_spi->dmxdev.demux = &dvb_spi->demux.dmx; |
| dvb_spi->dmxdev.capabilities = 0; |
| ret = dvb_dmxdev_init(&dvb_spi->dmxdev, |
| &dvb_spi->adapter); |
| if (ret < 0) { |
| pr_err("dvb_dmxdev_init() failed\n"); |
| goto fail_dmxdev; |
| } |
| |
| dvb_spi->dmx_fe.source = DMX_FRONTEND_0; |
| ret = dvb_spi->demux.dmx.add_frontend(&dvb_spi->demux.dmx, |
| &dvb_spi->dmx_fe); |
| if (ret < 0) { |
| pr_err("add_frontend() failed\n"); |
| goto fail_dmx_fe; |
| } |
| |
| ret = dvb_spi->demux.dmx.connect_frontend(&dvb_spi->demux.dmx, |
| &dvb_spi->dmx_fe); |
| if (ret < 0) { |
| pr_err("connect_frontend() failed\n"); |
| goto fail_fe_conn; |
| } |
| |
| pr_info("Sony CXD2880 has successfully attached.\n"); |
| |
| return 0; |
| |
| fail_fe_conn: |
| dvb_spi->demux.dmx.remove_frontend(&dvb_spi->demux.dmx, |
| &dvb_spi->dmx_fe); |
| fail_dmx_fe: |
| dvb_dmxdev_release(&dvb_spi->dmxdev); |
| fail_dmxdev: |
| dvb_dmx_release(&dvb_spi->demux); |
| fail_dmx: |
| dvb_unregister_frontend(&dvb_spi->dvb_fe); |
| fail_frontend: |
| dvb_frontend_detach(&dvb_spi->dvb_fe); |
| fail_attach: |
| dvb_unregister_adapter(&dvb_spi->adapter); |
| fail_adapter: |
| kfree(dvb_spi); |
| return ret; |
| } |
| |
| static int |
| cxd2880_spi_remove(struct spi_device *spi) |
| { |
| struct cxd2880_dvb_spi *dvb_spi; |
| |
| if (!spi) { |
| pr_err("invalid arg\n"); |
| return -EINVAL; |
| } |
| |
| dvb_spi = spi_get_drvdata(spi); |
| |
| if (!dvb_spi) { |
| pr_err("failed\n"); |
| return -EINVAL; |
| } |
| dvb_spi->demux.dmx.remove_frontend(&dvb_spi->demux.dmx, |
| &dvb_spi->dmx_fe); |
| dvb_dmxdev_release(&dvb_spi->dmxdev); |
| dvb_dmx_release(&dvb_spi->demux); |
| dvb_unregister_frontend(&dvb_spi->dvb_fe); |
| dvb_frontend_detach(&dvb_spi->dvb_fe); |
| dvb_unregister_adapter(&dvb_spi->adapter); |
| |
| if (dvb_spi->vcc_supply) |
| regulator_disable(dvb_spi->vcc_supply); |
| |
| kfree(dvb_spi); |
| pr_info("cxd2880_spi remove ok.\n"); |
| |
| return 0; |
| } |
| |
| static const struct spi_device_id cxd2880_spi_id[] = { |
| { "cxd2880", 0 }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(spi, cxd2880_spi_id); |
| |
| static struct spi_driver cxd2880_spi_driver = { |
| .driver = { |
| .name = "cxd2880", |
| .of_match_table = cxd2880_spi_of_match, |
| }, |
| .id_table = cxd2880_spi_id, |
| .probe = cxd2880_spi_probe, |
| .remove = cxd2880_spi_remove, |
| }; |
| module_spi_driver(cxd2880_spi_driver); |
| |
| MODULE_DESCRIPTION("Sony CXD2880 DVB-T2/T tuner + demod driver SPI adapter"); |
| MODULE_AUTHOR("Sony Semiconductor Solutions Corporation"); |
| MODULE_LICENSE("GPL v2"); |