| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2020 Google Corporation |
| */ |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| #include <net/bluetooth/mgmt.h> |
| |
| #include "hci_request.h" |
| #include "mgmt_util.h" |
| #include "msft.h" |
| |
| #define MSFT_RSSI_THRESHOLD_VALUE_MIN -127 |
| #define MSFT_RSSI_THRESHOLD_VALUE_MAX 20 |
| #define MSFT_RSSI_LOW_TIMEOUT_MAX 0x3C |
| |
| #define MSFT_OP_READ_SUPPORTED_FEATURES 0x00 |
| struct msft_cp_read_supported_features { |
| __u8 sub_opcode; |
| } __packed; |
| |
| struct msft_rp_read_supported_features { |
| __u8 status; |
| __u8 sub_opcode; |
| __le64 features; |
| __u8 evt_prefix_len; |
| __u8 evt_prefix[]; |
| } __packed; |
| |
| #define MSFT_OP_LE_MONITOR_ADVERTISEMENT 0x03 |
| #define MSFT_MONITOR_ADVERTISEMENT_TYPE_PATTERN 0x01 |
| struct msft_le_monitor_advertisement_pattern { |
| __u8 length; |
| __u8 data_type; |
| __u8 start_byte; |
| __u8 pattern[]; |
| }; |
| |
| struct msft_le_monitor_advertisement_pattern_data { |
| __u8 count; |
| __u8 data[]; |
| }; |
| |
| struct msft_cp_le_monitor_advertisement { |
| __u8 sub_opcode; |
| __s8 rssi_high; |
| __s8 rssi_low; |
| __u8 rssi_low_interval; |
| __u8 rssi_sampling_period; |
| __u8 cond_type; |
| __u8 data[]; |
| } __packed; |
| |
| struct msft_rp_le_monitor_advertisement { |
| __u8 status; |
| __u8 sub_opcode; |
| __u8 handle; |
| } __packed; |
| |
| #define MSFT_OP_LE_CANCEL_MONITOR_ADVERTISEMENT 0x04 |
| struct msft_cp_le_cancel_monitor_advertisement { |
| __u8 sub_opcode; |
| __u8 handle; |
| } __packed; |
| |
| struct msft_rp_le_cancel_monitor_advertisement { |
| __u8 status; |
| __u8 sub_opcode; |
| } __packed; |
| |
| #define MSFT_OP_LE_SET_ADVERTISEMENT_FILTER_ENABLE 0x05 |
| struct msft_cp_le_set_advertisement_filter_enable { |
| __u8 sub_opcode; |
| __u8 enable; |
| } __packed; |
| |
| struct msft_rp_le_set_advertisement_filter_enable { |
| __u8 status; |
| __u8 sub_opcode; |
| } __packed; |
| |
| #define MSFT_EV_LE_MONITOR_DEVICE 0x02 |
| struct msft_ev_le_monitor_device { |
| __u8 addr_type; |
| bdaddr_t bdaddr; |
| __u8 monitor_handle; |
| __u8 monitor_state; |
| } __packed; |
| |
| struct msft_monitor_advertisement_handle_data { |
| __u8 msft_handle; |
| __u16 mgmt_handle; |
| __s8 rssi_high; |
| __s8 rssi_low; |
| __u8 rssi_low_interval; |
| __u8 rssi_sampling_period; |
| __u8 cond_type; |
| struct list_head list; |
| }; |
| |
| enum monitor_addr_filter_state { |
| AF_STATE_IDLE, |
| AF_STATE_ADDING, |
| AF_STATE_ADDED, |
| AF_STATE_REMOVING, |
| }; |
| |
| #define MSFT_MONITOR_ADVERTISEMENT_TYPE_ADDR 0x04 |
| struct msft_monitor_addr_filter_data { |
| __u8 msft_handle; |
| __u8 pattern_handle; /* address filters pertain to */ |
| __u16 mgmt_handle; |
| int state; |
| __s8 rssi_high; |
| __s8 rssi_low; |
| __u8 rssi_low_interval; |
| __u8 rssi_sampling_period; |
| __u8 addr_type; |
| bdaddr_t bdaddr; |
| struct list_head list; |
| }; |
| |
| struct msft_data { |
| __u64 features; |
| __u8 evt_prefix_len; |
| __u8 *evt_prefix; |
| struct list_head handle_map; |
| struct list_head address_filters; |
| __u8 resuming; |
| __u8 suspending; |
| __u8 filter_enabled; |
| /* To synchronize add/remove address filter and monitor device event.*/ |
| struct mutex filter_lock; |
| }; |
| |
| bool msft_monitor_supported(struct hci_dev *hdev) |
| { |
| return !!(msft_get_features(hdev) & MSFT_FEATURE_MASK_LE_ADV_MONITOR); |
| } |
| |
| static bool read_supported_features(struct hci_dev *hdev, |
| struct msft_data *msft) |
| { |
| struct msft_cp_read_supported_features cp; |
| struct msft_rp_read_supported_features *rp; |
| struct sk_buff *skb; |
| |
| cp.sub_opcode = MSFT_OP_READ_SUPPORTED_FEATURES; |
| |
| skb = __hci_cmd_sync(hdev, hdev->msft_opcode, sizeof(cp), &cp, |
| HCI_CMD_TIMEOUT); |
| if (IS_ERR_OR_NULL(skb)) { |
| if (!skb) |
| skb = ERR_PTR(-EIO); |
| |
| bt_dev_err(hdev, "Failed to read MSFT supported features (%ld)", |
| PTR_ERR(skb)); |
| return false; |
| } |
| |
| if (skb->len < sizeof(*rp)) { |
| bt_dev_err(hdev, "MSFT supported features length mismatch"); |
| goto failed; |
| } |
| |
| rp = (struct msft_rp_read_supported_features *)skb->data; |
| |
| if (rp->sub_opcode != MSFT_OP_READ_SUPPORTED_FEATURES) |
| goto failed; |
| |
| if (rp->evt_prefix_len > 0) { |
| msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len, |
| GFP_KERNEL); |
| if (!msft->evt_prefix) |
| goto failed; |
| } |
| |
| msft->evt_prefix_len = rp->evt_prefix_len; |
| msft->features = __le64_to_cpu(rp->features); |
| |
| if (msft->features & MSFT_FEATURE_MASK_CURVE_VALIDITY) |
| hdev->msft_curve_validity = true; |
| |
| kfree_skb(skb); |
| return true; |
| |
| failed: |
| kfree_skb(skb); |
| return false; |
| } |
| |
| /* is_mgmt = true matches the handle exposed to userspace via mgmt. |
| * is_mgmt = false matches the handle used by the msft controller. |
| * This function requires the caller holds hdev->lock |
| */ |
| static struct msft_monitor_advertisement_handle_data *msft_find_handle_data |
| (struct hci_dev *hdev, u16 handle, bool is_mgmt) |
| { |
| struct msft_monitor_advertisement_handle_data *entry; |
| struct msft_data *msft = hdev->msft_data; |
| |
| list_for_each_entry(entry, &msft->handle_map, list) { |
| if (is_mgmt && entry->mgmt_handle == handle) |
| return entry; |
| if (!is_mgmt && entry->msft_handle == handle) |
| return entry; |
| } |
| |
| return NULL; |
| } |
| |
| /* This function requires the caller holds msft->filter_lock */ |
| static struct msft_monitor_addr_filter_data *msft_find_address_data |
| (struct hci_dev *hdev, u8 addr_type, bdaddr_t *addr, |
| u8 pattern_handle) |
| { |
| struct msft_monitor_addr_filter_data *entry; |
| struct msft_data *msft = hdev->msft_data; |
| |
| list_for_each_entry(entry, &msft->address_filters, list) { |
| if (entry->pattern_handle == pattern_handle && |
| addr_type == entry->addr_type && |
| !bacmp(addr, &entry->bdaddr)) |
| return entry; |
| } |
| |
| return NULL; |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| static int msft_monitor_device_del(struct hci_dev *hdev, __u16 mgmt_handle, |
| bdaddr_t *bdaddr, __u8 addr_type, |
| bool notify) |
| { |
| struct monitored_device *dev, *tmp; |
| int count = 0; |
| |
| list_for_each_entry_safe(dev, tmp, &hdev->monitored_devices, list) { |
| /* mgmt_handle == 0 indicates remove all devices, whereas, |
| * bdaddr == NULL indicates remove all devices matching the |
| * mgmt_handle. |
| */ |
| if ((!mgmt_handle || dev->handle == mgmt_handle) && |
| (!bdaddr || (!bacmp(bdaddr, &dev->bdaddr) && |
| addr_type == dev->addr_type))) { |
| if (notify && dev->notified) { |
| mgmt_adv_monitor_device_lost(hdev, dev->handle, |
| &dev->bdaddr, |
| dev->addr_type); |
| } |
| |
| list_del(&dev->list); |
| kfree(dev); |
| count++; |
| } |
| } |
| |
| return count; |
| } |
| |
| static int msft_le_monitor_advertisement_cb(struct hci_dev *hdev, u16 opcode, |
| struct adv_monitor *monitor, |
| struct sk_buff *skb) |
| { |
| struct msft_rp_le_monitor_advertisement *rp; |
| struct msft_monitor_advertisement_handle_data *handle_data; |
| struct msft_data *msft = hdev->msft_data; |
| int status = 0; |
| |
| hci_dev_lock(hdev); |
| |
| rp = (struct msft_rp_le_monitor_advertisement *)skb->data; |
| if (skb->len < sizeof(*rp)) { |
| status = HCI_ERROR_UNSPECIFIED; |
| goto unlock; |
| } |
| |
| status = rp->status; |
| if (status) |
| goto unlock; |
| |
| handle_data = kmalloc(sizeof(*handle_data), GFP_KERNEL); |
| if (!handle_data) { |
| status = HCI_ERROR_UNSPECIFIED; |
| goto unlock; |
| } |
| |
| handle_data->mgmt_handle = monitor->handle; |
| handle_data->msft_handle = rp->handle; |
| handle_data->cond_type = MSFT_MONITOR_ADVERTISEMENT_TYPE_PATTERN; |
| INIT_LIST_HEAD(&handle_data->list); |
| list_add(&handle_data->list, &msft->handle_map); |
| |
| monitor->state = ADV_MONITOR_STATE_OFFLOADED; |
| |
| unlock: |
| if (status) |
| hci_free_adv_monitor(hdev, monitor); |
| |
| hci_dev_unlock(hdev); |
| |
| return status; |
| } |
| |
| /* This function requires the caller holds hci_req_sync_lock */ |
| static void msft_remove_addr_filters_sync(struct hci_dev *hdev, u8 handle) |
| { |
| struct msft_monitor_addr_filter_data *address_filter, *n; |
| struct msft_cp_le_cancel_monitor_advertisement cp; |
| struct msft_data *msft = hdev->msft_data; |
| struct list_head head; |
| struct sk_buff *skb; |
| |
| INIT_LIST_HEAD(&head); |
| |
| /* Cancel all corresponding address monitors */ |
| mutex_lock(&msft->filter_lock); |
| |
| list_for_each_entry_safe(address_filter, n, &msft->address_filters, |
| list) { |
| if (address_filter->pattern_handle != handle) |
| continue; |
| |
| list_del(&address_filter->list); |
| |
| /* Keep the address filter and let |
| * msft_add_address_filter_sync() remove and free the address |
| * filter. |
| */ |
| if (address_filter->state == AF_STATE_ADDING) { |
| address_filter->state = AF_STATE_REMOVING; |
| continue; |
| } |
| |
| /* Keep the address filter and let |
| * msft_cancel_address_filter_sync() remove and free the address |
| * filter |
| */ |
| if (address_filter->state == AF_STATE_REMOVING) |
| continue; |
| |
| list_add_tail(&address_filter->list, &head); |
| } |
| |
| mutex_unlock(&msft->filter_lock); |
| |
| list_for_each_entry_safe(address_filter, n, &head, list) { |
| list_del(&address_filter->list); |
| |
| cp.sub_opcode = MSFT_OP_LE_CANCEL_MONITOR_ADVERTISEMENT; |
| cp.handle = address_filter->msft_handle; |
| |
| skb = __hci_cmd_sync(hdev, hdev->msft_opcode, sizeof(cp), &cp, |
| HCI_CMD_TIMEOUT); |
| if (IS_ERR_OR_NULL(skb)) { |
| kfree(address_filter); |
| continue; |
| } |
| |
| kfree_skb(skb); |
| |
| bt_dev_dbg(hdev, "MSFT: Canceled device %pMR address filter", |
| &address_filter->bdaddr); |
| |
| kfree(address_filter); |
| } |
| } |
| |
| static int msft_le_cancel_monitor_advertisement_cb(struct hci_dev *hdev, |
| u16 opcode, |
| struct adv_monitor *monitor, |
| struct sk_buff *skb) |
| { |
| struct msft_rp_le_cancel_monitor_advertisement *rp; |
| struct msft_monitor_advertisement_handle_data *handle_data; |
| struct msft_data *msft = hdev->msft_data; |
| int status = 0; |
| u8 msft_handle; |
| |
| rp = (struct msft_rp_le_cancel_monitor_advertisement *)skb->data; |
| if (skb->len < sizeof(*rp)) { |
| status = HCI_ERROR_UNSPECIFIED; |
| goto done; |
| } |
| |
| status = rp->status; |
| if (status) |
| goto done; |
| |
| hci_dev_lock(hdev); |
| |
| handle_data = msft_find_handle_data(hdev, monitor->handle, true); |
| |
| if (handle_data) { |
| if (monitor->state == ADV_MONITOR_STATE_OFFLOADED) |
| monitor->state = ADV_MONITOR_STATE_REGISTERED; |
| |
| /* Do not free the monitor if it is being removed due to |
| * suspend. It will be re-monitored on resume. |
| */ |
| if (!msft->suspending) { |
| hci_free_adv_monitor(hdev, monitor); |
| |
| /* Clear any monitored devices by this Adv Monitor */ |
| msft_monitor_device_del(hdev, handle_data->mgmt_handle, |
| NULL, 0, false); |
| } |
| |
| msft_handle = handle_data->msft_handle; |
| |
| list_del(&handle_data->list); |
| kfree(handle_data); |
| |
| hci_dev_unlock(hdev); |
| |
| msft_remove_addr_filters_sync(hdev, msft_handle); |
| } else { |
| hci_dev_unlock(hdev); |
| } |
| |
| done: |
| return status; |
| } |
| |
| /* This function requires the caller holds hci_req_sync_lock */ |
| static int msft_remove_monitor_sync(struct hci_dev *hdev, |
| struct adv_monitor *monitor) |
| { |
| struct msft_cp_le_cancel_monitor_advertisement cp; |
| struct msft_monitor_advertisement_handle_data *handle_data; |
| struct sk_buff *skb; |
| |
| handle_data = msft_find_handle_data(hdev, monitor->handle, true); |
| |
| /* If no matched handle, just remove without telling controller */ |
| if (!handle_data) |
| return -ENOENT; |
| |
| cp.sub_opcode = MSFT_OP_LE_CANCEL_MONITOR_ADVERTISEMENT; |
| cp.handle = handle_data->msft_handle; |
| |
| skb = __hci_cmd_sync(hdev, hdev->msft_opcode, sizeof(cp), &cp, |
| HCI_CMD_TIMEOUT); |
| if (IS_ERR_OR_NULL(skb)) { |
| if (!skb) |
| return -EIO; |
| return PTR_ERR(skb); |
| } |
| |
| return msft_le_cancel_monitor_advertisement_cb(hdev, hdev->msft_opcode, |
| monitor, skb); |
| } |
| |
| /* This function requires the caller holds hci_req_sync_lock */ |
| int msft_suspend_sync(struct hci_dev *hdev) |
| { |
| struct msft_data *msft = hdev->msft_data; |
| struct adv_monitor *monitor; |
| int handle = 0; |
| |
| if (!msft || !msft_monitor_supported(hdev)) |
| return 0; |
| |
| msft->suspending = true; |
| |
| while (1) { |
| monitor = idr_get_next(&hdev->adv_monitors_idr, &handle); |
| if (!monitor) |
| break; |
| |
| msft_remove_monitor_sync(hdev, monitor); |
| |
| handle++; |
| } |
| |
| /* All monitors have been removed */ |
| msft->suspending = false; |
| |
| return 0; |
| } |
| |
| static bool msft_monitor_rssi_valid(struct adv_monitor *monitor) |
| { |
| struct adv_rssi_thresholds *r = &monitor->rssi; |
| |
| if (r->high_threshold < MSFT_RSSI_THRESHOLD_VALUE_MIN || |
| r->high_threshold > MSFT_RSSI_THRESHOLD_VALUE_MAX || |
| r->low_threshold < MSFT_RSSI_THRESHOLD_VALUE_MIN || |
| r->low_threshold > MSFT_RSSI_THRESHOLD_VALUE_MAX) |
| return false; |
| |
| /* High_threshold_timeout is not supported, |
| * once high_threshold is reached, events are immediately reported. |
| */ |
| if (r->high_threshold_timeout != 0) |
| return false; |
| |
| if (r->low_threshold_timeout > MSFT_RSSI_LOW_TIMEOUT_MAX) |
| return false; |
| |
| /* Sampling period from 0x00 to 0xFF are all allowed */ |
| return true; |
| } |
| |
| static bool msft_monitor_pattern_valid(struct adv_monitor *monitor) |
| { |
| return msft_monitor_rssi_valid(monitor); |
| /* No additional check needed for pattern-based monitor */ |
| } |
| |
| static int msft_add_monitor_sync(struct hci_dev *hdev, |
| struct adv_monitor *monitor) |
| { |
| struct msft_cp_le_monitor_advertisement *cp; |
| struct msft_le_monitor_advertisement_pattern_data *pattern_data; |
| struct msft_monitor_advertisement_handle_data *handle_data; |
| struct msft_le_monitor_advertisement_pattern *pattern; |
| struct adv_pattern *entry; |
| size_t total_size = sizeof(*cp) + sizeof(*pattern_data); |
| ptrdiff_t offset = 0; |
| u8 pattern_count = 0; |
| struct sk_buff *skb; |
| int err; |
| |
| if (!msft_monitor_pattern_valid(monitor)) |
| return -EINVAL; |
| |
| list_for_each_entry(entry, &monitor->patterns, list) { |
| pattern_count++; |
| total_size += sizeof(*pattern) + entry->length; |
| } |
| |
| cp = kmalloc(total_size, GFP_KERNEL); |
| if (!cp) |
| return -ENOMEM; |
| |
| cp->sub_opcode = MSFT_OP_LE_MONITOR_ADVERTISEMENT; |
| cp->rssi_high = monitor->rssi.high_threshold; |
| cp->rssi_low = monitor->rssi.low_threshold; |
| cp->rssi_low_interval = (u8)monitor->rssi.low_threshold_timeout; |
| cp->rssi_sampling_period = monitor->rssi.sampling_period; |
| |
| cp->cond_type = MSFT_MONITOR_ADVERTISEMENT_TYPE_PATTERN; |
| |
| pattern_data = (void *)cp->data; |
| pattern_data->count = pattern_count; |
| |
| list_for_each_entry(entry, &monitor->patterns, list) { |
| pattern = (void *)(pattern_data->data + offset); |
| /* the length also includes data_type and offset */ |
| pattern->length = entry->length + 2; |
| pattern->data_type = entry->ad_type; |
| pattern->start_byte = entry->offset; |
| memcpy(pattern->pattern, entry->value, entry->length); |
| offset += sizeof(*pattern) + entry->length; |
| } |
| |
| skb = __hci_cmd_sync(hdev, hdev->msft_opcode, total_size, cp, |
| HCI_CMD_TIMEOUT); |
| |
| if (IS_ERR_OR_NULL(skb)) { |
| err = PTR_ERR(skb); |
| goto out_free; |
| } |
| |
| err = msft_le_monitor_advertisement_cb(hdev, hdev->msft_opcode, |
| monitor, skb); |
| if (err) |
| goto out_free; |
| |
| handle_data = msft_find_handle_data(hdev, monitor->handle, true); |
| if (!handle_data) { |
| err = -ENODATA; |
| goto out_free; |
| } |
| |
| handle_data->rssi_high = cp->rssi_high; |
| handle_data->rssi_low = cp->rssi_low; |
| handle_data->rssi_low_interval = cp->rssi_low_interval; |
| handle_data->rssi_sampling_period = cp->rssi_sampling_period; |
| |
| out_free: |
| kfree(cp); |
| return err; |
| } |
| |
| /* This function requires the caller holds hci_req_sync_lock */ |
| static void reregister_monitor(struct hci_dev *hdev) |
| { |
| struct adv_monitor *monitor; |
| struct msft_data *msft = hdev->msft_data; |
| int handle = 0; |
| |
| if (!msft) |
| return; |
| |
| msft->resuming = true; |
| |
| while (1) { |
| monitor = idr_get_next(&hdev->adv_monitors_idr, &handle); |
| if (!monitor) |
| break; |
| |
| msft_add_monitor_sync(hdev, monitor); |
| |
| handle++; |
| } |
| |
| /* All monitors have been reregistered */ |
| msft->resuming = false; |
| } |
| |
| /* This function requires the caller holds hci_req_sync_lock */ |
| int msft_resume_sync(struct hci_dev *hdev) |
| { |
| struct msft_data *msft = hdev->msft_data; |
| |
| if (!msft || !msft_monitor_supported(hdev)) |
| return 0; |
| |
| hci_dev_lock(hdev); |
| |
| /* Clear already tracked devices on resume. Once the monitors are |
| * reregistered, devices in range will be found again after resume. |
| */ |
| hdev->advmon_pend_notify = false; |
| msft_monitor_device_del(hdev, 0, NULL, 0, true); |
| |
| hci_dev_unlock(hdev); |
| |
| reregister_monitor(hdev); |
| |
| return 0; |
| } |
| |
| /* This function requires the caller holds hci_req_sync_lock */ |
| void msft_do_open(struct hci_dev *hdev) |
| { |
| struct msft_data *msft = hdev->msft_data; |
| |
| if (hdev->msft_opcode == HCI_OP_NOP) |
| return; |
| |
| if (!msft) { |
| bt_dev_err(hdev, "MSFT extension not registered"); |
| return; |
| } |
| |
| bt_dev_dbg(hdev, "Initialize MSFT extension"); |
| |
| /* Reset existing MSFT data before re-reading */ |
| kfree(msft->evt_prefix); |
| msft->evt_prefix = NULL; |
| msft->evt_prefix_len = 0; |
| msft->features = 0; |
| |
| if (!read_supported_features(hdev, msft)) { |
| hdev->msft_data = NULL; |
| kfree(msft); |
| return; |
| } |
| |
| if (msft_monitor_supported(hdev)) { |
| msft->resuming = true; |
| msft_set_filter_enable(hdev, true); |
| /* Monitors get removed on power off, so we need to explicitly |
| * tell the controller to re-monitor. |
| */ |
| reregister_monitor(hdev); |
| } |
| } |
| |
| void msft_do_close(struct hci_dev *hdev) |
| { |
| struct msft_data *msft = hdev->msft_data; |
| struct msft_monitor_advertisement_handle_data *handle_data, *tmp; |
| struct msft_monitor_addr_filter_data *address_filter, *n; |
| struct adv_monitor *monitor; |
| |
| if (!msft) |
| return; |
| |
| bt_dev_dbg(hdev, "Cleanup of MSFT extension"); |
| |
| /* The controller will silently remove all monitors on power off. |
| * Therefore, remove handle_data mapping and reset monitor state. |
| */ |
| list_for_each_entry_safe(handle_data, tmp, &msft->handle_map, list) { |
| monitor = idr_find(&hdev->adv_monitors_idr, |
| handle_data->mgmt_handle); |
| |
| if (monitor && monitor->state == ADV_MONITOR_STATE_OFFLOADED) |
| monitor->state = ADV_MONITOR_STATE_REGISTERED; |
| |
| list_del(&handle_data->list); |
| kfree(handle_data); |
| } |
| |
| mutex_lock(&msft->filter_lock); |
| list_for_each_entry_safe(address_filter, n, &msft->address_filters, |
| list) { |
| list_del(&address_filter->list); |
| kfree(address_filter); |
| } |
| mutex_unlock(&msft->filter_lock); |
| |
| hci_dev_lock(hdev); |
| |
| /* Clear any devices that are being monitored and notify device lost */ |
| hdev->advmon_pend_notify = false; |
| msft_monitor_device_del(hdev, 0, NULL, 0, true); |
| |
| hci_dev_unlock(hdev); |
| } |
| |
| static int msft_cancel_address_filter_sync(struct hci_dev *hdev, void *data) |
| { |
| struct msft_monitor_addr_filter_data *address_filter = data; |
| struct msft_cp_le_cancel_monitor_advertisement cp; |
| struct msft_data *msft = hdev->msft_data; |
| struct sk_buff *skb; |
| int err = 0; |
| |
| if (!msft) { |
| bt_dev_err(hdev, "MSFT: msft data is freed"); |
| return -EINVAL; |
| } |
| |
| /* The address filter has been removed by hci dev close */ |
| if (!test_bit(HCI_UP, &hdev->flags)) |
| return 0; |
| |
| mutex_lock(&msft->filter_lock); |
| list_del(&address_filter->list); |
| mutex_unlock(&msft->filter_lock); |
| |
| cp.sub_opcode = MSFT_OP_LE_CANCEL_MONITOR_ADVERTISEMENT; |
| cp.handle = address_filter->msft_handle; |
| |
| skb = __hci_cmd_sync(hdev, hdev->msft_opcode, sizeof(cp), &cp, |
| HCI_CMD_TIMEOUT); |
| if (IS_ERR_OR_NULL(skb)) { |
| bt_dev_err(hdev, "MSFT: Failed to cancel address (%pMR) filter", |
| &address_filter->bdaddr); |
| err = -EIO; |
| goto done; |
| } |
| kfree_skb(skb); |
| |
| bt_dev_dbg(hdev, "MSFT: Canceled device %pMR address filter", |
| &address_filter->bdaddr); |
| |
| done: |
| kfree(address_filter); |
| |
| return err; |
| } |
| |
| void msft_register(struct hci_dev *hdev) |
| { |
| struct msft_data *msft = NULL; |
| |
| bt_dev_dbg(hdev, "Register MSFT extension"); |
| |
| msft = kzalloc(sizeof(*msft), GFP_KERNEL); |
| if (!msft) { |
| bt_dev_err(hdev, "Failed to register MSFT extension"); |
| return; |
| } |
| |
| INIT_LIST_HEAD(&msft->handle_map); |
| INIT_LIST_HEAD(&msft->address_filters); |
| hdev->msft_data = msft; |
| mutex_init(&msft->filter_lock); |
| } |
| |
| void msft_unregister(struct hci_dev *hdev) |
| { |
| struct msft_data *msft = hdev->msft_data; |
| |
| if (!msft) |
| return; |
| |
| bt_dev_dbg(hdev, "Unregister MSFT extension"); |
| |
| hdev->msft_data = NULL; |
| |
| kfree(msft->evt_prefix); |
| mutex_destroy(&msft->filter_lock); |
| kfree(msft); |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| static void msft_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, |
| __u8 addr_type, __u16 mgmt_handle) |
| { |
| struct monitored_device *dev; |
| |
| dev = kmalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) { |
| bt_dev_err(hdev, "MSFT vendor event %u: no memory", |
| MSFT_EV_LE_MONITOR_DEVICE); |
| return; |
| } |
| |
| bacpy(&dev->bdaddr, bdaddr); |
| dev->addr_type = addr_type; |
| dev->handle = mgmt_handle; |
| dev->notified = false; |
| |
| INIT_LIST_HEAD(&dev->list); |
| list_add(&dev->list, &hdev->monitored_devices); |
| hdev->advmon_pend_notify = true; |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| static void msft_device_lost(struct hci_dev *hdev, bdaddr_t *bdaddr, |
| __u8 addr_type, __u16 mgmt_handle) |
| { |
| if (!msft_monitor_device_del(hdev, mgmt_handle, bdaddr, addr_type, |
| true)) { |
| bt_dev_err(hdev, "MSFT vendor event %u: dev %pMR not in list", |
| MSFT_EV_LE_MONITOR_DEVICE, bdaddr); |
| } |
| } |
| |
| static void *msft_skb_pull(struct hci_dev *hdev, struct sk_buff *skb, |
| u8 ev, size_t len) |
| { |
| void *data; |
| |
| data = skb_pull_data(skb, len); |
| if (!data) |
| bt_dev_err(hdev, "Malformed MSFT vendor event: 0x%02x", ev); |
| |
| return data; |
| } |
| |
| static int msft_add_address_filter_sync(struct hci_dev *hdev, void *data) |
| { |
| struct msft_monitor_addr_filter_data *address_filter = data; |
| struct msft_rp_le_monitor_advertisement *rp; |
| struct msft_cp_le_monitor_advertisement *cp; |
| struct msft_data *msft = hdev->msft_data; |
| struct sk_buff *skb = NULL; |
| bool remove = false; |
| size_t size; |
| |
| if (!msft) { |
| bt_dev_err(hdev, "MSFT: msft data is freed"); |
| return -EINVAL; |
| } |
| |
| /* The address filter has been removed by hci dev close */ |
| if (!test_bit(HCI_UP, &hdev->flags)) |
| return -ENODEV; |
| |
| /* We are safe to use the address filter from now on. |
| * msft_monitor_device_evt() wouldn't delete this filter because it's |
| * not been added by now. |
| * And all other functions that requiring hci_req_sync_lock wouldn't |
| * touch this filter before this func completes because it's protected |
| * by hci_req_sync_lock. |
| */ |
| |
| if (address_filter->state == AF_STATE_REMOVING) { |
| mutex_lock(&msft->filter_lock); |
| list_del(&address_filter->list); |
| mutex_unlock(&msft->filter_lock); |
| kfree(address_filter); |
| return 0; |
| } |
| |
| size = sizeof(*cp) + |
| sizeof(address_filter->addr_type) + |
| sizeof(address_filter->bdaddr); |
| cp = kzalloc(size, GFP_KERNEL); |
| if (!cp) { |
| bt_dev_err(hdev, "MSFT: Alloc cmd param err"); |
| remove = true; |
| goto done; |
| } |
| cp->sub_opcode = MSFT_OP_LE_MONITOR_ADVERTISEMENT; |
| cp->rssi_high = address_filter->rssi_high; |
| cp->rssi_low = address_filter->rssi_low; |
| cp->rssi_low_interval = address_filter->rssi_low_interval; |
| cp->rssi_sampling_period = address_filter->rssi_sampling_period; |
| cp->cond_type = MSFT_MONITOR_ADVERTISEMENT_TYPE_ADDR; |
| cp->data[0] = address_filter->addr_type; |
| memcpy(&cp->data[1], &address_filter->bdaddr, |
| sizeof(address_filter->bdaddr)); |
| |
| skb = __hci_cmd_sync(hdev, hdev->msft_opcode, size, cp, |
| HCI_CMD_TIMEOUT); |
| if (IS_ERR_OR_NULL(skb)) { |
| bt_dev_err(hdev, "Failed to enable address %pMR filter", |
| &address_filter->bdaddr); |
| skb = NULL; |
| remove = true; |
| goto done; |
| } |
| |
| rp = skb_pull_data(skb, sizeof(*rp)); |
| if (!rp || rp->sub_opcode != MSFT_OP_LE_MONITOR_ADVERTISEMENT || |
| rp->status) |
| remove = true; |
| |
| done: |
| mutex_lock(&msft->filter_lock); |
| |
| if (remove) { |
| bt_dev_warn(hdev, "MSFT: Remove address (%pMR) filter", |
| &address_filter->bdaddr); |
| list_del(&address_filter->list); |
| kfree(address_filter); |
| } else { |
| address_filter->state = AF_STATE_ADDED; |
| address_filter->msft_handle = rp->handle; |
| bt_dev_dbg(hdev, "MSFT: Address %pMR filter enabled", |
| &address_filter->bdaddr); |
| } |
| mutex_unlock(&msft->filter_lock); |
| |
| kfree_skb(skb); |
| |
| return 0; |
| } |
| |
| /* This function requires the caller holds msft->filter_lock */ |
| static struct msft_monitor_addr_filter_data *msft_add_address_filter |
| (struct hci_dev *hdev, u8 addr_type, bdaddr_t *bdaddr, |
| struct msft_monitor_advertisement_handle_data *handle_data) |
| { |
| struct msft_monitor_addr_filter_data *address_filter = NULL; |
| struct msft_data *msft = hdev->msft_data; |
| int err; |
| |
| address_filter = kzalloc(sizeof(*address_filter), GFP_KERNEL); |
| if (!address_filter) |
| return NULL; |
| |
| address_filter->state = AF_STATE_ADDING; |
| address_filter->msft_handle = 0xff; |
| address_filter->pattern_handle = handle_data->msft_handle; |
| address_filter->mgmt_handle = handle_data->mgmt_handle; |
| address_filter->rssi_high = handle_data->rssi_high; |
| address_filter->rssi_low = handle_data->rssi_low; |
| address_filter->rssi_low_interval = handle_data->rssi_low_interval; |
| address_filter->rssi_sampling_period = handle_data->rssi_sampling_period; |
| address_filter->addr_type = addr_type; |
| bacpy(&address_filter->bdaddr, bdaddr); |
| |
| /* With the above AF_STATE_ADDING, duplicated address filter can be |
| * avoided when receiving monitor device event (found/lost) frequently |
| * for the same device. |
| */ |
| list_add_tail(&address_filter->list, &msft->address_filters); |
| |
| err = hci_cmd_sync_queue(hdev, msft_add_address_filter_sync, |
| address_filter, NULL); |
| if (err < 0) { |
| bt_dev_err(hdev, "MSFT: Add address %pMR filter err", bdaddr); |
| list_del(&address_filter->list); |
| kfree(address_filter); |
| return NULL; |
| } |
| |
| bt_dev_dbg(hdev, "MSFT: Add device %pMR address filter", |
| &address_filter->bdaddr); |
| |
| return address_filter; |
| } |
| |
| /* This function requires the caller holds hdev->lock */ |
| static void msft_monitor_device_evt(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct msft_monitor_addr_filter_data *n, *address_filter = NULL; |
| struct msft_ev_le_monitor_device *ev; |
| struct msft_monitor_advertisement_handle_data *handle_data; |
| struct msft_data *msft = hdev->msft_data; |
| u16 mgmt_handle = 0xffff; |
| u8 addr_type; |
| |
| ev = msft_skb_pull(hdev, skb, MSFT_EV_LE_MONITOR_DEVICE, sizeof(*ev)); |
| if (!ev) |
| return; |
| |
| bt_dev_dbg(hdev, |
| "MSFT vendor event 0x%02x: handle 0x%04x state %d addr %pMR", |
| MSFT_EV_LE_MONITOR_DEVICE, ev->monitor_handle, |
| ev->monitor_state, &ev->bdaddr); |
| |
| handle_data = msft_find_handle_data(hdev, ev->monitor_handle, false); |
| |
| if (!test_bit(HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER, &hdev->quirks)) { |
| if (!handle_data) |
| return; |
| mgmt_handle = handle_data->mgmt_handle; |
| goto report_state; |
| } |
| |
| if (handle_data) { |
| /* Don't report any device found/lost event from pattern |
| * monitors. Pattern monitor always has its address filters for |
| * tracking devices. |
| */ |
| |
| address_filter = msft_find_address_data(hdev, ev->addr_type, |
| &ev->bdaddr, |
| handle_data->msft_handle); |
| if (address_filter) |
| return; |
| |
| if (ev->monitor_state && handle_data->cond_type == |
| MSFT_MONITOR_ADVERTISEMENT_TYPE_PATTERN) |
| msft_add_address_filter(hdev, ev->addr_type, |
| &ev->bdaddr, handle_data); |
| |
| return; |
| } |
| |
| /* This device event is not from pattern monitor. |
| * Report it if there is a corresponding address_filter for it. |
| */ |
| list_for_each_entry(n, &msft->address_filters, list) { |
| if (n->state == AF_STATE_ADDED && |
| n->msft_handle == ev->monitor_handle) { |
| mgmt_handle = n->mgmt_handle; |
| address_filter = n; |
| break; |
| } |
| } |
| |
| if (!address_filter) { |
| bt_dev_warn(hdev, "MSFT: Unexpected device event %pMR, %u, %u", |
| &ev->bdaddr, ev->monitor_handle, ev->monitor_state); |
| return; |
| } |
| |
| report_state: |
| switch (ev->addr_type) { |
| case ADDR_LE_DEV_PUBLIC: |
| addr_type = BDADDR_LE_PUBLIC; |
| break; |
| |
| case ADDR_LE_DEV_RANDOM: |
| addr_type = BDADDR_LE_RANDOM; |
| break; |
| |
| default: |
| bt_dev_err(hdev, |
| "MSFT vendor event 0x%02x: unknown addr type 0x%02x", |
| MSFT_EV_LE_MONITOR_DEVICE, ev->addr_type); |
| return; |
| } |
| |
| if (ev->monitor_state) { |
| msft_device_found(hdev, &ev->bdaddr, addr_type, mgmt_handle); |
| } else { |
| if (address_filter && address_filter->state == AF_STATE_ADDED) { |
| address_filter->state = AF_STATE_REMOVING; |
| hci_cmd_sync_queue(hdev, |
| msft_cancel_address_filter_sync, |
| address_filter, |
| NULL); |
| } |
| msft_device_lost(hdev, &ev->bdaddr, addr_type, mgmt_handle); |
| } |
| } |
| |
| void msft_vendor_evt(struct hci_dev *hdev, void *data, struct sk_buff *skb) |
| { |
| struct msft_data *msft = hdev->msft_data; |
| u8 *evt_prefix; |
| u8 *evt; |
| |
| if (!msft) |
| return; |
| |
| /* When the extension has defined an event prefix, check that it |
| * matches, and otherwise just return. |
| */ |
| if (msft->evt_prefix_len > 0) { |
| evt_prefix = msft_skb_pull(hdev, skb, 0, msft->evt_prefix_len); |
| if (!evt_prefix) |
| return; |
| |
| if (memcmp(evt_prefix, msft->evt_prefix, msft->evt_prefix_len)) |
| return; |
| } |
| |
| /* Every event starts at least with an event code and the rest of |
| * the data is variable and depends on the event code. |
| */ |
| if (skb->len < 1) |
| return; |
| |
| evt = msft_skb_pull(hdev, skb, 0, sizeof(*evt)); |
| if (!evt) |
| return; |
| |
| hci_dev_lock(hdev); |
| |
| switch (*evt) { |
| case MSFT_EV_LE_MONITOR_DEVICE: |
| mutex_lock(&msft->filter_lock); |
| msft_monitor_device_evt(hdev, skb); |
| mutex_unlock(&msft->filter_lock); |
| break; |
| |
| default: |
| bt_dev_dbg(hdev, "MSFT vendor event 0x%02x", *evt); |
| break; |
| } |
| |
| hci_dev_unlock(hdev); |
| } |
| |
| __u64 msft_get_features(struct hci_dev *hdev) |
| { |
| struct msft_data *msft = hdev->msft_data; |
| |
| return msft ? msft->features : 0; |
| } |
| |
| static void msft_le_set_advertisement_filter_enable_cb(struct hci_dev *hdev, |
| void *user_data, |
| u8 status) |
| { |
| struct msft_cp_le_set_advertisement_filter_enable *cp = user_data; |
| struct msft_data *msft = hdev->msft_data; |
| |
| /* Error 0x0C would be returned if the filter enabled status is |
| * already set to whatever we were trying to set. |
| * Although the default state should be disabled, some controller set |
| * the initial value to enabled. Because there is no way to know the |
| * actual initial value before sending this command, here we also treat |
| * error 0x0C as success. |
| */ |
| if (status != 0x00 && status != 0x0C) |
| return; |
| |
| hci_dev_lock(hdev); |
| |
| msft->filter_enabled = cp->enable; |
| |
| if (status == 0x0C) |
| bt_dev_warn(hdev, "MSFT filter_enable is already %s", |
| cp->enable ? "on" : "off"); |
| |
| hci_dev_unlock(hdev); |
| } |
| |
| /* This function requires the caller holds hci_req_sync_lock */ |
| int msft_add_monitor_pattern(struct hci_dev *hdev, struct adv_monitor *monitor) |
| { |
| struct msft_data *msft = hdev->msft_data; |
| |
| if (!msft) |
| return -EOPNOTSUPP; |
| |
| if (msft->resuming || msft->suspending) |
| return -EBUSY; |
| |
| return msft_add_monitor_sync(hdev, monitor); |
| } |
| |
| /* This function requires the caller holds hci_req_sync_lock */ |
| int msft_remove_monitor(struct hci_dev *hdev, struct adv_monitor *monitor) |
| { |
| struct msft_data *msft = hdev->msft_data; |
| |
| if (!msft) |
| return -EOPNOTSUPP; |
| |
| if (msft->resuming || msft->suspending) |
| return -EBUSY; |
| |
| return msft_remove_monitor_sync(hdev, monitor); |
| } |
| |
| int msft_set_filter_enable(struct hci_dev *hdev, bool enable) |
| { |
| struct msft_cp_le_set_advertisement_filter_enable cp; |
| struct msft_data *msft = hdev->msft_data; |
| int err; |
| |
| if (!msft) |
| return -EOPNOTSUPP; |
| |
| cp.sub_opcode = MSFT_OP_LE_SET_ADVERTISEMENT_FILTER_ENABLE; |
| cp.enable = enable; |
| err = __hci_cmd_sync_status(hdev, hdev->msft_opcode, sizeof(cp), &cp, |
| HCI_CMD_TIMEOUT); |
| |
| msft_le_set_advertisement_filter_enable_cb(hdev, &cp, err); |
| |
| return 0; |
| } |
| |
| bool msft_curve_validity(struct hci_dev *hdev) |
| { |
| return hdev->msft_curve_validity; |
| } |