| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) STMicroelectronics SA 2014 |
| * Authors: Fabien Dessenne <fabien.dessenne@st.com> for STMicroelectronics. |
| */ |
| |
| #include <linux/component.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/firmware.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/reset.h> |
| #include <linux/seq_file.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_device.h> |
| #include <drm/drm_fb_dma_helper.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_framebuffer.h> |
| #include <drm/drm_gem_dma_helper.h> |
| |
| #include "sti_compositor.h" |
| #include "sti_drv.h" |
| #include "sti_hqvdp_lut.h" |
| #include "sti_plane.h" |
| #include "sti_vtg.h" |
| |
| /* Firmware name */ |
| #define HQVDP_FMW_NAME "hqvdp-stih407.bin" |
| |
| /* Regs address */ |
| #define HQVDP_DMEM 0x00000000 /* 0x00000000 */ |
| #define HQVDP_PMEM 0x00040000 /* 0x00040000 */ |
| #define HQVDP_RD_PLUG 0x000E0000 /* 0x000E0000 */ |
| #define HQVDP_RD_PLUG_CONTROL (HQVDP_RD_PLUG + 0x1000) /* 0x000E1000 */ |
| #define HQVDP_RD_PLUG_PAGE_SIZE (HQVDP_RD_PLUG + 0x1004) /* 0x000E1004 */ |
| #define HQVDP_RD_PLUG_MIN_OPC (HQVDP_RD_PLUG + 0x1008) /* 0x000E1008 */ |
| #define HQVDP_RD_PLUG_MAX_OPC (HQVDP_RD_PLUG + 0x100C) /* 0x000E100C */ |
| #define HQVDP_RD_PLUG_MAX_CHK (HQVDP_RD_PLUG + 0x1010) /* 0x000E1010 */ |
| #define HQVDP_RD_PLUG_MAX_MSG (HQVDP_RD_PLUG + 0x1014) /* 0x000E1014 */ |
| #define HQVDP_RD_PLUG_MIN_SPACE (HQVDP_RD_PLUG + 0x1018) /* 0x000E1018 */ |
| #define HQVDP_WR_PLUG 0x000E2000 /* 0x000E2000 */ |
| #define HQVDP_WR_PLUG_CONTROL (HQVDP_WR_PLUG + 0x1000) /* 0x000E3000 */ |
| #define HQVDP_WR_PLUG_PAGE_SIZE (HQVDP_WR_PLUG + 0x1004) /* 0x000E3004 */ |
| #define HQVDP_WR_PLUG_MIN_OPC (HQVDP_WR_PLUG + 0x1008) /* 0x000E3008 */ |
| #define HQVDP_WR_PLUG_MAX_OPC (HQVDP_WR_PLUG + 0x100C) /* 0x000E300C */ |
| #define HQVDP_WR_PLUG_MAX_CHK (HQVDP_WR_PLUG + 0x1010) /* 0x000E3010 */ |
| #define HQVDP_WR_PLUG_MAX_MSG (HQVDP_WR_PLUG + 0x1014) /* 0x000E3014 */ |
| #define HQVDP_WR_PLUG_MIN_SPACE (HQVDP_WR_PLUG + 0x1018) /* 0x000E3018 */ |
| #define HQVDP_MBX 0x000E4000 /* 0x000E4000 */ |
| #define HQVDP_MBX_IRQ_TO_XP70 (HQVDP_MBX + 0x0000) /* 0x000E4000 */ |
| #define HQVDP_MBX_INFO_HOST (HQVDP_MBX + 0x0004) /* 0x000E4004 */ |
| #define HQVDP_MBX_IRQ_TO_HOST (HQVDP_MBX + 0x0008) /* 0x000E4008 */ |
| #define HQVDP_MBX_INFO_XP70 (HQVDP_MBX + 0x000C) /* 0x000E400C */ |
| #define HQVDP_MBX_SW_RESET_CTRL (HQVDP_MBX + 0x0010) /* 0x000E4010 */ |
| #define HQVDP_MBX_STARTUP_CTRL1 (HQVDP_MBX + 0x0014) /* 0x000E4014 */ |
| #define HQVDP_MBX_STARTUP_CTRL2 (HQVDP_MBX + 0x0018) /* 0x000E4018 */ |
| #define HQVDP_MBX_GP_STATUS (HQVDP_MBX + 0x001C) /* 0x000E401C */ |
| #define HQVDP_MBX_NEXT_CMD (HQVDP_MBX + 0x0020) /* 0x000E4020 */ |
| #define HQVDP_MBX_CURRENT_CMD (HQVDP_MBX + 0x0024) /* 0x000E4024 */ |
| #define HQVDP_MBX_SOFT_VSYNC (HQVDP_MBX + 0x0028) /* 0x000E4028 */ |
| |
| /* Plugs config */ |
| #define PLUG_CONTROL_ENABLE 0x00000001 |
| #define PLUG_PAGE_SIZE_256 0x00000002 |
| #define PLUG_MIN_OPC_8 0x00000003 |
| #define PLUG_MAX_OPC_64 0x00000006 |
| #define PLUG_MAX_CHK_2X 0x00000001 |
| #define PLUG_MAX_MSG_1X 0x00000000 |
| #define PLUG_MIN_SPACE_1 0x00000000 |
| |
| /* SW reset CTRL */ |
| #define SW_RESET_CTRL_FULL BIT(0) |
| #define SW_RESET_CTRL_CORE BIT(1) |
| |
| /* Startup ctrl 1 */ |
| #define STARTUP_CTRL1_RST_DONE BIT(0) |
| #define STARTUP_CTRL1_AUTH_IDLE BIT(2) |
| |
| /* Startup ctrl 2 */ |
| #define STARTUP_CTRL2_FETCH_EN BIT(1) |
| |
| /* Info xP70 */ |
| #define INFO_XP70_FW_READY BIT(15) |
| #define INFO_XP70_FW_PROCESSING BIT(14) |
| #define INFO_XP70_FW_INITQUEUES BIT(13) |
| |
| /* SOFT_VSYNC */ |
| #define SOFT_VSYNC_HW 0x00000000 |
| #define SOFT_VSYNC_SW_CMD 0x00000001 |
| #define SOFT_VSYNC_SW_CTRL_IRQ 0x00000003 |
| |
| /* Reset & boot poll config */ |
| #define POLL_MAX_ATTEMPT 50 |
| #define POLL_DELAY_MS 20 |
| |
| #define SCALE_FACTOR 8192 |
| #define SCALE_MAX_FOR_LEG_LUT_F 4096 |
| #define SCALE_MAX_FOR_LEG_LUT_E 4915 |
| #define SCALE_MAX_FOR_LEG_LUT_D 6654 |
| #define SCALE_MAX_FOR_LEG_LUT_C 8192 |
| |
| enum sti_hvsrc_orient { |
| HVSRC_HORI, |
| HVSRC_VERT |
| }; |
| |
| /* Command structures */ |
| struct sti_hqvdp_top { |
| u32 config; |
| u32 mem_format; |
| u32 current_luma; |
| u32 current_enh_luma; |
| u32 current_right_luma; |
| u32 current_enh_right_luma; |
| u32 current_chroma; |
| u32 current_enh_chroma; |
| u32 current_right_chroma; |
| u32 current_enh_right_chroma; |
| u32 output_luma; |
| u32 output_chroma; |
| u32 luma_src_pitch; |
| u32 luma_enh_src_pitch; |
| u32 luma_right_src_pitch; |
| u32 luma_enh_right_src_pitch; |
| u32 chroma_src_pitch; |
| u32 chroma_enh_src_pitch; |
| u32 chroma_right_src_pitch; |
| u32 chroma_enh_right_src_pitch; |
| u32 luma_processed_pitch; |
| u32 chroma_processed_pitch; |
| u32 input_frame_size; |
| u32 input_viewport_ori; |
| u32 input_viewport_ori_right; |
| u32 input_viewport_size; |
| u32 left_view_border_width; |
| u32 right_view_border_width; |
| u32 left_view_3d_offset_width; |
| u32 right_view_3d_offset_width; |
| u32 side_stripe_color; |
| u32 crc_reset_ctrl; |
| }; |
| |
| /* Configs for interlaced : no IT, no pass thru, 3 fields */ |
| #define TOP_CONFIG_INTER_BTM 0x00000000 |
| #define TOP_CONFIG_INTER_TOP 0x00000002 |
| |
| /* Config for progressive : no IT, no pass thru, 3 fields */ |
| #define TOP_CONFIG_PROGRESSIVE 0x00000001 |
| |
| /* Default MemFormat: in=420_raster_dual out=444_raster;opaque Mem2Tv mode */ |
| #define TOP_MEM_FORMAT_DFLT 0x00018060 |
| |
| /* Min/Max size */ |
| #define MAX_WIDTH 0x1FFF |
| #define MAX_HEIGHT 0x0FFF |
| #define MIN_WIDTH 0x0030 |
| #define MIN_HEIGHT 0x0010 |
| |
| struct sti_hqvdp_vc1re { |
| u32 ctrl_prv_csdi; |
| u32 ctrl_cur_csdi; |
| u32 ctrl_nxt_csdi; |
| u32 ctrl_cur_fmd; |
| u32 ctrl_nxt_fmd; |
| }; |
| |
| struct sti_hqvdp_fmd { |
| u32 config; |
| u32 viewport_ori; |
| u32 viewport_size; |
| u32 next_next_luma; |
| u32 next_next_right_luma; |
| u32 next_next_next_luma; |
| u32 next_next_next_right_luma; |
| u32 threshold_scd; |
| u32 threshold_rfd; |
| u32 threshold_move; |
| u32 threshold_cfd; |
| }; |
| |
| struct sti_hqvdp_csdi { |
| u32 config; |
| u32 config2; |
| u32 dcdi_config; |
| u32 prev_luma; |
| u32 prev_enh_luma; |
| u32 prev_right_luma; |
| u32 prev_enh_right_luma; |
| u32 next_luma; |
| u32 next_enh_luma; |
| u32 next_right_luma; |
| u32 next_enh_right_luma; |
| u32 prev_chroma; |
| u32 prev_enh_chroma; |
| u32 prev_right_chroma; |
| u32 prev_enh_right_chroma; |
| u32 next_chroma; |
| u32 next_enh_chroma; |
| u32 next_right_chroma; |
| u32 next_enh_right_chroma; |
| u32 prev_motion; |
| u32 prev_right_motion; |
| u32 cur_motion; |
| u32 cur_right_motion; |
| u32 next_motion; |
| u32 next_right_motion; |
| }; |
| |
| /* Config for progressive: by pass */ |
| #define CSDI_CONFIG_PROG 0x00000000 |
| /* Config for directional deinterlacing without motion */ |
| #define CSDI_CONFIG_INTER_DIR 0x00000016 |
| /* Additional configs for fader, blender, motion,... deinterlace algorithms */ |
| #define CSDI_CONFIG2_DFLT 0x000001B3 |
| #define CSDI_DCDI_CONFIG_DFLT 0x00203803 |
| |
| struct sti_hqvdp_hvsrc { |
| u32 hor_panoramic_ctrl; |
| u32 output_picture_size; |
| u32 init_horizontal; |
| u32 init_vertical; |
| u32 param_ctrl; |
| u32 yh_coef[NB_COEF]; |
| u32 ch_coef[NB_COEF]; |
| u32 yv_coef[NB_COEF]; |
| u32 cv_coef[NB_COEF]; |
| u32 hori_shift; |
| u32 vert_shift; |
| }; |
| |
| /* Default ParamCtrl: all controls enabled */ |
| #define HVSRC_PARAM_CTRL_DFLT 0xFFFFFFFF |
| |
| struct sti_hqvdp_iqi { |
| u32 config; |
| u32 demo_wind_size; |
| u32 pk_config; |
| u32 coeff0_coeff1; |
| u32 coeff2_coeff3; |
| u32 coeff4; |
| u32 pk_lut; |
| u32 pk_gain; |
| u32 pk_coring_level; |
| u32 cti_config; |
| u32 le_config; |
| u32 le_lut[64]; |
| u32 con_bri; |
| u32 sat_gain; |
| u32 pxf_conf; |
| u32 default_color; |
| }; |
| |
| /* Default Config : IQI bypassed */ |
| #define IQI_CONFIG_DFLT 0x00000001 |
| /* Default Contrast & Brightness gain = 256 */ |
| #define IQI_CON_BRI_DFLT 0x00000100 |
| /* Default Saturation gain = 256 */ |
| #define IQI_SAT_GAIN_DFLT 0x00000100 |
| /* Default PxfConf : P2I bypassed */ |
| #define IQI_PXF_CONF_DFLT 0x00000001 |
| |
| struct sti_hqvdp_top_status { |
| u32 processing_time; |
| u32 input_y_crc; |
| u32 input_uv_crc; |
| }; |
| |
| struct sti_hqvdp_fmd_status { |
| u32 fmd_repeat_move_status; |
| u32 fmd_scene_count_status; |
| u32 cfd_sum; |
| u32 field_sum; |
| u32 next_y_fmd_crc; |
| u32 next_next_y_fmd_crc; |
| u32 next_next_next_y_fmd_crc; |
| }; |
| |
| struct sti_hqvdp_csdi_status { |
| u32 prev_y_csdi_crc; |
| u32 cur_y_csdi_crc; |
| u32 next_y_csdi_crc; |
| u32 prev_uv_csdi_crc; |
| u32 cur_uv_csdi_crc; |
| u32 next_uv_csdi_crc; |
| u32 y_csdi_crc; |
| u32 uv_csdi_crc; |
| u32 uv_cup_crc; |
| u32 mot_csdi_crc; |
| u32 mot_cur_csdi_crc; |
| u32 mot_prev_csdi_crc; |
| }; |
| |
| struct sti_hqvdp_hvsrc_status { |
| u32 y_hvsrc_crc; |
| u32 u_hvsrc_crc; |
| u32 v_hvsrc_crc; |
| }; |
| |
| struct sti_hqvdp_iqi_status { |
| u32 pxf_it_status; |
| u32 y_iqi_crc; |
| u32 u_iqi_crc; |
| u32 v_iqi_crc; |
| }; |
| |
| /* Main commands. We use 2 commands one being processed by the firmware, one |
| * ready to be fetched upon next Vsync*/ |
| #define NB_VDP_CMD 2 |
| |
| struct sti_hqvdp_cmd { |
| struct sti_hqvdp_top top; |
| struct sti_hqvdp_vc1re vc1re; |
| struct sti_hqvdp_fmd fmd; |
| struct sti_hqvdp_csdi csdi; |
| struct sti_hqvdp_hvsrc hvsrc; |
| struct sti_hqvdp_iqi iqi; |
| struct sti_hqvdp_top_status top_status; |
| struct sti_hqvdp_fmd_status fmd_status; |
| struct sti_hqvdp_csdi_status csdi_status; |
| struct sti_hqvdp_hvsrc_status hvsrc_status; |
| struct sti_hqvdp_iqi_status iqi_status; |
| }; |
| |
| /* |
| * STI HQVDP structure |
| * |
| * @dev: driver device |
| * @drm_dev: the drm device |
| * @regs: registers |
| * @plane: plane structure for hqvdp it self |
| * @clk: IP clock |
| * @clk_pix_main: pix main clock |
| * @reset: reset control |
| * @vtg_nb: notifier to handle VTG Vsync |
| * @btm_field_pending: is there any bottom field (interlaced frame) to display |
| * @hqvdp_cmd: buffer of commands |
| * @hqvdp_cmd_paddr: physical address of hqvdp_cmd |
| * @vtg: vtg for main data path |
| * @xp70_initialized: true if xp70 is already initialized |
| * @vtg_registered: true if registered to VTG |
| */ |
| struct sti_hqvdp { |
| struct device *dev; |
| struct drm_device *drm_dev; |
| void __iomem *regs; |
| struct sti_plane plane; |
| struct clk *clk; |
| struct clk *clk_pix_main; |
| struct reset_control *reset; |
| struct notifier_block vtg_nb; |
| bool btm_field_pending; |
| void *hqvdp_cmd; |
| u32 hqvdp_cmd_paddr; |
| struct sti_vtg *vtg; |
| bool xp70_initialized; |
| bool vtg_registered; |
| }; |
| |
| #define to_sti_hqvdp(x) container_of(x, struct sti_hqvdp, plane) |
| |
| static const uint32_t hqvdp_supported_formats[] = { |
| DRM_FORMAT_NV12, |
| }; |
| |
| /** |
| * sti_hqvdp_get_free_cmd |
| * @hqvdp: hqvdp structure |
| * |
| * Look for a hqvdp_cmd that is not being used (or about to be used) by the FW. |
| * |
| * RETURNS: |
| * the offset of the command to be used. |
| * -1 in error cases |
| */ |
| static int sti_hqvdp_get_free_cmd(struct sti_hqvdp *hqvdp) |
| { |
| u32 curr_cmd, next_cmd; |
| u32 cmd = hqvdp->hqvdp_cmd_paddr; |
| int i; |
| |
| curr_cmd = readl(hqvdp->regs + HQVDP_MBX_CURRENT_CMD); |
| next_cmd = readl(hqvdp->regs + HQVDP_MBX_NEXT_CMD); |
| |
| for (i = 0; i < NB_VDP_CMD; i++) { |
| if ((cmd != curr_cmd) && (cmd != next_cmd)) |
| return i * sizeof(struct sti_hqvdp_cmd); |
| cmd += sizeof(struct sti_hqvdp_cmd); |
| } |
| |
| return -1; |
| } |
| |
| /** |
| * sti_hqvdp_get_curr_cmd |
| * @hqvdp: hqvdp structure |
| * |
| * Look for the hqvdp_cmd that is being used by the FW. |
| * |
| * RETURNS: |
| * the offset of the command to be used. |
| * -1 in error cases |
| */ |
| static int sti_hqvdp_get_curr_cmd(struct sti_hqvdp *hqvdp) |
| { |
| u32 curr_cmd; |
| u32 cmd = hqvdp->hqvdp_cmd_paddr; |
| unsigned int i; |
| |
| curr_cmd = readl(hqvdp->regs + HQVDP_MBX_CURRENT_CMD); |
| |
| for (i = 0; i < NB_VDP_CMD; i++) { |
| if (cmd == curr_cmd) |
| return i * sizeof(struct sti_hqvdp_cmd); |
| |
| cmd += sizeof(struct sti_hqvdp_cmd); |
| } |
| |
| return -1; |
| } |
| |
| /** |
| * sti_hqvdp_get_next_cmd |
| * @hqvdp: hqvdp structure |
| * |
| * Look for the next hqvdp_cmd that will be used by the FW. |
| * |
| * RETURNS: |
| * the offset of the next command that will be used. |
| * -1 in error cases |
| */ |
| static int sti_hqvdp_get_next_cmd(struct sti_hqvdp *hqvdp) |
| { |
| int next_cmd; |
| dma_addr_t cmd = hqvdp->hqvdp_cmd_paddr; |
| unsigned int i; |
| |
| next_cmd = readl(hqvdp->regs + HQVDP_MBX_NEXT_CMD); |
| |
| for (i = 0; i < NB_VDP_CMD; i++) { |
| if (cmd == next_cmd) |
| return i * sizeof(struct sti_hqvdp_cmd); |
| |
| cmd += sizeof(struct sti_hqvdp_cmd); |
| } |
| |
| return -1; |
| } |
| |
| #define DBGFS_DUMP(reg) seq_printf(s, "\n %-25s 0x%08X", #reg, \ |
| readl(hqvdp->regs + reg)) |
| |
| static const char *hqvdp_dbg_get_lut(u32 *coef) |
| { |
| if (!memcmp(coef, coef_lut_a_legacy, 16)) |
| return "LUT A"; |
| if (!memcmp(coef, coef_lut_b, 16)) |
| return "LUT B"; |
| if (!memcmp(coef, coef_lut_c_y_legacy, 16)) |
| return "LUT C Y"; |
| if (!memcmp(coef, coef_lut_c_c_legacy, 16)) |
| return "LUT C C"; |
| if (!memcmp(coef, coef_lut_d_y_legacy, 16)) |
| return "LUT D Y"; |
| if (!memcmp(coef, coef_lut_d_c_legacy, 16)) |
| return "LUT D C"; |
| if (!memcmp(coef, coef_lut_e_y_legacy, 16)) |
| return "LUT E Y"; |
| if (!memcmp(coef, coef_lut_e_c_legacy, 16)) |
| return "LUT E C"; |
| if (!memcmp(coef, coef_lut_f_y_legacy, 16)) |
| return "LUT F Y"; |
| if (!memcmp(coef, coef_lut_f_c_legacy, 16)) |
| return "LUT F C"; |
| return "<UNKNOWN>"; |
| } |
| |
| static void hqvdp_dbg_dump_cmd(struct seq_file *s, struct sti_hqvdp_cmd *c) |
| { |
| int src_w, src_h, dst_w, dst_h; |
| |
| seq_puts(s, "\n\tTOP:"); |
| seq_printf(s, "\n\t %-20s 0x%08X", "Config", c->top.config); |
| switch (c->top.config) { |
| case TOP_CONFIG_PROGRESSIVE: |
| seq_puts(s, "\tProgressive"); |
| break; |
| case TOP_CONFIG_INTER_TOP: |
| seq_puts(s, "\tInterlaced, top field"); |
| break; |
| case TOP_CONFIG_INTER_BTM: |
| seq_puts(s, "\tInterlaced, bottom field"); |
| break; |
| default: |
| seq_puts(s, "\t<UNKNOWN>"); |
| break; |
| } |
| |
| seq_printf(s, "\n\t %-20s 0x%08X", "MemFormat", c->top.mem_format); |
| seq_printf(s, "\n\t %-20s 0x%08X", "CurrentY", c->top.current_luma); |
| seq_printf(s, "\n\t %-20s 0x%08X", "CurrentC", c->top.current_chroma); |
| seq_printf(s, "\n\t %-20s 0x%08X", "YSrcPitch", c->top.luma_src_pitch); |
| seq_printf(s, "\n\t %-20s 0x%08X", "CSrcPitch", |
| c->top.chroma_src_pitch); |
| seq_printf(s, "\n\t %-20s 0x%08X", "InputFrameSize", |
| c->top.input_frame_size); |
| seq_printf(s, "\t%dx%d", |
| c->top.input_frame_size & 0x0000FFFF, |
| c->top.input_frame_size >> 16); |
| seq_printf(s, "\n\t %-20s 0x%08X", "InputViewportSize", |
| c->top.input_viewport_size); |
| src_w = c->top.input_viewport_size & 0x0000FFFF; |
| src_h = c->top.input_viewport_size >> 16; |
| seq_printf(s, "\t%dx%d", src_w, src_h); |
| |
| seq_puts(s, "\n\tHVSRC:"); |
| seq_printf(s, "\n\t %-20s 0x%08X", "OutputPictureSize", |
| c->hvsrc.output_picture_size); |
| dst_w = c->hvsrc.output_picture_size & 0x0000FFFF; |
| dst_h = c->hvsrc.output_picture_size >> 16; |
| seq_printf(s, "\t%dx%d", dst_w, dst_h); |
| seq_printf(s, "\n\t %-20s 0x%08X", "ParamCtrl", c->hvsrc.param_ctrl); |
| |
| seq_printf(s, "\n\t %-20s %s", "yh_coef", |
| hqvdp_dbg_get_lut(c->hvsrc.yh_coef)); |
| seq_printf(s, "\n\t %-20s %s", "ch_coef", |
| hqvdp_dbg_get_lut(c->hvsrc.ch_coef)); |
| seq_printf(s, "\n\t %-20s %s", "yv_coef", |
| hqvdp_dbg_get_lut(c->hvsrc.yv_coef)); |
| seq_printf(s, "\n\t %-20s %s", "cv_coef", |
| hqvdp_dbg_get_lut(c->hvsrc.cv_coef)); |
| |
| seq_printf(s, "\n\t %-20s", "ScaleH"); |
| if (dst_w > src_w) |
| seq_printf(s, " %d/1", dst_w / src_w); |
| else |
| seq_printf(s, " 1/%d", src_w / dst_w); |
| |
| seq_printf(s, "\n\t %-20s", "tScaleV"); |
| if (dst_h > src_h) |
| seq_printf(s, " %d/1", dst_h / src_h); |
| else |
| seq_printf(s, " 1/%d", src_h / dst_h); |
| |
| seq_puts(s, "\n\tCSDI:"); |
| seq_printf(s, "\n\t %-20s 0x%08X\t", "Config", c->csdi.config); |
| switch (c->csdi.config) { |
| case CSDI_CONFIG_PROG: |
| seq_puts(s, "Bypass"); |
| break; |
| case CSDI_CONFIG_INTER_DIR: |
| seq_puts(s, "Deinterlace, directional"); |
| break; |
| default: |
| seq_puts(s, "<UNKNOWN>"); |
| break; |
| } |
| |
| seq_printf(s, "\n\t %-20s 0x%08X", "Config2", c->csdi.config2); |
| seq_printf(s, "\n\t %-20s 0x%08X", "DcdiConfig", c->csdi.dcdi_config); |
| } |
| |
| static int hqvdp_dbg_show(struct seq_file *s, void *data) |
| { |
| struct drm_info_node *node = s->private; |
| struct sti_hqvdp *hqvdp = (struct sti_hqvdp *)node->info_ent->data; |
| int cmd, cmd_offset, infoxp70; |
| void *virt; |
| |
| seq_printf(s, "%s: (vaddr = 0x%p)", |
| sti_plane_to_str(&hqvdp->plane), hqvdp->regs); |
| |
| DBGFS_DUMP(HQVDP_MBX_IRQ_TO_XP70); |
| DBGFS_DUMP(HQVDP_MBX_INFO_HOST); |
| DBGFS_DUMP(HQVDP_MBX_IRQ_TO_HOST); |
| DBGFS_DUMP(HQVDP_MBX_INFO_XP70); |
| infoxp70 = readl(hqvdp->regs + HQVDP_MBX_INFO_XP70); |
| seq_puts(s, "\tFirmware state: "); |
| if (infoxp70 & INFO_XP70_FW_READY) |
| seq_puts(s, "idle and ready"); |
| else if (infoxp70 & INFO_XP70_FW_PROCESSING) |
| seq_puts(s, "processing a picture"); |
| else if (infoxp70 & INFO_XP70_FW_INITQUEUES) |
| seq_puts(s, "programming queues"); |
| else |
| seq_puts(s, "NOT READY"); |
| |
| DBGFS_DUMP(HQVDP_MBX_SW_RESET_CTRL); |
| DBGFS_DUMP(HQVDP_MBX_STARTUP_CTRL1); |
| if (readl(hqvdp->regs + HQVDP_MBX_STARTUP_CTRL1) |
| & STARTUP_CTRL1_RST_DONE) |
| seq_puts(s, "\tReset is done"); |
| else |
| seq_puts(s, "\tReset is NOT done"); |
| DBGFS_DUMP(HQVDP_MBX_STARTUP_CTRL2); |
| if (readl(hqvdp->regs + HQVDP_MBX_STARTUP_CTRL2) |
| & STARTUP_CTRL2_FETCH_EN) |
| seq_puts(s, "\tFetch is enabled"); |
| else |
| seq_puts(s, "\tFetch is NOT enabled"); |
| DBGFS_DUMP(HQVDP_MBX_GP_STATUS); |
| DBGFS_DUMP(HQVDP_MBX_NEXT_CMD); |
| DBGFS_DUMP(HQVDP_MBX_CURRENT_CMD); |
| DBGFS_DUMP(HQVDP_MBX_SOFT_VSYNC); |
| if (!(readl(hqvdp->regs + HQVDP_MBX_SOFT_VSYNC) & 3)) |
| seq_puts(s, "\tHW Vsync"); |
| else |
| seq_puts(s, "\tSW Vsync ?!?!"); |
| |
| /* Last command */ |
| cmd = readl(hqvdp->regs + HQVDP_MBX_CURRENT_CMD); |
| cmd_offset = sti_hqvdp_get_curr_cmd(hqvdp); |
| if (cmd_offset == -1) { |
| seq_puts(s, "\n\n Last command: unknown"); |
| } else { |
| virt = hqvdp->hqvdp_cmd + cmd_offset; |
| seq_printf(s, "\n\n Last command: address @ 0x%x (0x%p)", |
| cmd, virt); |
| hqvdp_dbg_dump_cmd(s, (struct sti_hqvdp_cmd *)virt); |
| } |
| |
| /* Next command */ |
| cmd = readl(hqvdp->regs + HQVDP_MBX_NEXT_CMD); |
| cmd_offset = sti_hqvdp_get_next_cmd(hqvdp); |
| if (cmd_offset == -1) { |
| seq_puts(s, "\n\n Next command: unknown"); |
| } else { |
| virt = hqvdp->hqvdp_cmd + cmd_offset; |
| seq_printf(s, "\n\n Next command address: @ 0x%x (0x%p)", |
| cmd, virt); |
| hqvdp_dbg_dump_cmd(s, (struct sti_hqvdp_cmd *)virt); |
| } |
| |
| seq_putc(s, '\n'); |
| return 0; |
| } |
| |
| static struct drm_info_list hqvdp_debugfs_files[] = { |
| { "hqvdp", hqvdp_dbg_show, 0, NULL }, |
| }; |
| |
| static void hqvdp_debugfs_init(struct sti_hqvdp *hqvdp, struct drm_minor *minor) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(hqvdp_debugfs_files); i++) |
| hqvdp_debugfs_files[i].data = hqvdp; |
| |
| drm_debugfs_create_files(hqvdp_debugfs_files, |
| ARRAY_SIZE(hqvdp_debugfs_files), |
| minor->debugfs_root, minor); |
| } |
| |
| /** |
| * sti_hqvdp_update_hvsrc |
| * @orient: horizontal or vertical |
| * @scale: scaling/zoom factor |
| * @hvsrc: the structure containing the LUT coef |
| * |
| * Update the Y and C Lut coef, as well as the shift param |
| * |
| * RETURNS: |
| * None. |
| */ |
| static void sti_hqvdp_update_hvsrc(enum sti_hvsrc_orient orient, int scale, |
| struct sti_hqvdp_hvsrc *hvsrc) |
| { |
| const int *coef_c, *coef_y; |
| int shift_c, shift_y; |
| |
| /* Get the appropriate coef tables */ |
| if (scale < SCALE_MAX_FOR_LEG_LUT_F) { |
| coef_y = coef_lut_f_y_legacy; |
| coef_c = coef_lut_f_c_legacy; |
| shift_y = SHIFT_LUT_F_Y_LEGACY; |
| shift_c = SHIFT_LUT_F_C_LEGACY; |
| } else if (scale < SCALE_MAX_FOR_LEG_LUT_E) { |
| coef_y = coef_lut_e_y_legacy; |
| coef_c = coef_lut_e_c_legacy; |
| shift_y = SHIFT_LUT_E_Y_LEGACY; |
| shift_c = SHIFT_LUT_E_C_LEGACY; |
| } else if (scale < SCALE_MAX_FOR_LEG_LUT_D) { |
| coef_y = coef_lut_d_y_legacy; |
| coef_c = coef_lut_d_c_legacy; |
| shift_y = SHIFT_LUT_D_Y_LEGACY; |
| shift_c = SHIFT_LUT_D_C_LEGACY; |
| } else if (scale < SCALE_MAX_FOR_LEG_LUT_C) { |
| coef_y = coef_lut_c_y_legacy; |
| coef_c = coef_lut_c_c_legacy; |
| shift_y = SHIFT_LUT_C_Y_LEGACY; |
| shift_c = SHIFT_LUT_C_C_LEGACY; |
| } else if (scale == SCALE_MAX_FOR_LEG_LUT_C) { |
| coef_y = coef_c = coef_lut_b; |
| shift_y = shift_c = SHIFT_LUT_B; |
| } else { |
| coef_y = coef_c = coef_lut_a_legacy; |
| shift_y = shift_c = SHIFT_LUT_A_LEGACY; |
| } |
| |
| if (orient == HVSRC_HORI) { |
| hvsrc->hori_shift = (shift_c << 16) | shift_y; |
| memcpy(hvsrc->yh_coef, coef_y, sizeof(hvsrc->yh_coef)); |
| memcpy(hvsrc->ch_coef, coef_c, sizeof(hvsrc->ch_coef)); |
| } else { |
| hvsrc->vert_shift = (shift_c << 16) | shift_y; |
| memcpy(hvsrc->yv_coef, coef_y, sizeof(hvsrc->yv_coef)); |
| memcpy(hvsrc->cv_coef, coef_c, sizeof(hvsrc->cv_coef)); |
| } |
| } |
| |
| /** |
| * sti_hqvdp_check_hw_scaling |
| * @hqvdp: hqvdp pointer |
| * @mode: display mode with timing constraints |
| * @src_w: source width |
| * @src_h: source height |
| * @dst_w: destination width |
| * @dst_h: destination height |
| * |
| * Check if the HW is able to perform the scaling request |
| * The firmware scaling limitation is "CEIL(1/Zy) <= FLOOR(LFW)" where: |
| * Zy = OutputHeight / InputHeight |
| * LFW = (Tx * IPClock) / (MaxNbCycles * Cp) |
| * Tx : Total video mode horizontal resolution |
| * IPClock : HQVDP IP clock (Mhz) |
| * MaxNbCycles: max(InputWidth, OutputWidth) |
| * Cp: Video mode pixel clock (Mhz) |
| * |
| * RETURNS: |
| * True if the HW can scale. |
| */ |
| static bool sti_hqvdp_check_hw_scaling(struct sti_hqvdp *hqvdp, |
| struct drm_display_mode *mode, |
| int src_w, int src_h, |
| int dst_w, int dst_h) |
| { |
| unsigned long lfw; |
| unsigned int inv_zy; |
| |
| lfw = mode->htotal * (clk_get_rate(hqvdp->clk) / 1000000); |
| lfw /= max(src_w, dst_w) * mode->clock / 1000; |
| |
| inv_zy = DIV_ROUND_UP(src_h, dst_h); |
| |
| return (inv_zy <= lfw) ? true : false; |
| } |
| |
| /** |
| * sti_hqvdp_disable |
| * @hqvdp: hqvdp pointer |
| * |
| * Disables the HQVDP plane |
| */ |
| static void sti_hqvdp_disable(struct sti_hqvdp *hqvdp) |
| { |
| int i; |
| |
| DRM_DEBUG_DRIVER("%s\n", sti_plane_to_str(&hqvdp->plane)); |
| |
| /* Unregister VTG Vsync callback */ |
| if (sti_vtg_unregister_client(hqvdp->vtg, &hqvdp->vtg_nb)) |
| DRM_DEBUG_DRIVER("Warning: cannot unregister VTG notifier\n"); |
| |
| /* Set next cmd to NULL */ |
| writel(0, hqvdp->regs + HQVDP_MBX_NEXT_CMD); |
| |
| for (i = 0; i < POLL_MAX_ATTEMPT; i++) { |
| if (readl(hqvdp->regs + HQVDP_MBX_INFO_XP70) |
| & INFO_XP70_FW_READY) |
| break; |
| msleep(POLL_DELAY_MS); |
| } |
| |
| /* VTG can stop now */ |
| clk_disable_unprepare(hqvdp->clk_pix_main); |
| |
| if (i == POLL_MAX_ATTEMPT) |
| DRM_ERROR("XP70 could not revert to idle\n"); |
| |
| hqvdp->plane.status = STI_PLANE_DISABLED; |
| hqvdp->vtg_registered = false; |
| } |
| |
| /** |
| * sti_hqvdp_vtg_cb |
| * @nb: notifier block |
| * @evt: event message |
| * @data: private data |
| * |
| * Handle VTG Vsync event, display pending bottom field |
| * |
| * RETURNS: |
| * 0 on success. |
| */ |
| static int sti_hqvdp_vtg_cb(struct notifier_block *nb, unsigned long evt, void *data) |
| { |
| struct sti_hqvdp *hqvdp = container_of(nb, struct sti_hqvdp, vtg_nb); |
| int btm_cmd_offset, top_cmd_offest; |
| struct sti_hqvdp_cmd *btm_cmd, *top_cmd; |
| |
| if ((evt != VTG_TOP_FIELD_EVENT) && (evt != VTG_BOTTOM_FIELD_EVENT)) { |
| DRM_DEBUG_DRIVER("Unknown event\n"); |
| return 0; |
| } |
| |
| if (hqvdp->plane.status == STI_PLANE_FLUSHING) { |
| /* disable need to be synchronize on vsync event */ |
| DRM_DEBUG_DRIVER("Vsync event received => disable %s\n", |
| sti_plane_to_str(&hqvdp->plane)); |
| |
| sti_hqvdp_disable(hqvdp); |
| } |
| |
| if (hqvdp->btm_field_pending) { |
| /* Create the btm field command from the current one */ |
| btm_cmd_offset = sti_hqvdp_get_free_cmd(hqvdp); |
| top_cmd_offest = sti_hqvdp_get_curr_cmd(hqvdp); |
| if ((btm_cmd_offset == -1) || (top_cmd_offest == -1)) { |
| DRM_DEBUG_DRIVER("Warning: no cmd, will skip field\n"); |
| return -EBUSY; |
| } |
| |
| btm_cmd = hqvdp->hqvdp_cmd + btm_cmd_offset; |
| top_cmd = hqvdp->hqvdp_cmd + top_cmd_offest; |
| |
| memcpy(btm_cmd, top_cmd, sizeof(*btm_cmd)); |
| |
| btm_cmd->top.config = TOP_CONFIG_INTER_BTM; |
| btm_cmd->top.current_luma += |
| btm_cmd->top.luma_src_pitch / 2; |
| btm_cmd->top.current_chroma += |
| btm_cmd->top.chroma_src_pitch / 2; |
| |
| /* Post the command to mailbox */ |
| writel(hqvdp->hqvdp_cmd_paddr + btm_cmd_offset, |
| hqvdp->regs + HQVDP_MBX_NEXT_CMD); |
| |
| hqvdp->btm_field_pending = false; |
| |
| dev_dbg(hqvdp->dev, "%s Posted command:0x%x\n", |
| __func__, hqvdp->hqvdp_cmd_paddr); |
| |
| sti_plane_update_fps(&hqvdp->plane, false, true); |
| } |
| |
| return 0; |
| } |
| |
| static void sti_hqvdp_init(struct sti_hqvdp *hqvdp) |
| { |
| int size; |
| dma_addr_t dma_addr; |
| |
| hqvdp->vtg_nb.notifier_call = sti_hqvdp_vtg_cb; |
| |
| /* Allocate memory for the VDP commands */ |
| size = NB_VDP_CMD * sizeof(struct sti_hqvdp_cmd); |
| hqvdp->hqvdp_cmd = dma_alloc_wc(hqvdp->dev, size, |
| &dma_addr, |
| GFP_KERNEL | GFP_DMA); |
| if (!hqvdp->hqvdp_cmd) { |
| DRM_ERROR("Failed to allocate memory for VDP cmd\n"); |
| return; |
| } |
| |
| hqvdp->hqvdp_cmd_paddr = (u32)dma_addr; |
| memset(hqvdp->hqvdp_cmd, 0, size); |
| } |
| |
| static void sti_hqvdp_init_plugs(struct sti_hqvdp *hqvdp) |
| { |
| /* Configure Plugs (same for RD & WR) */ |
| writel(PLUG_PAGE_SIZE_256, hqvdp->regs + HQVDP_RD_PLUG_PAGE_SIZE); |
| writel(PLUG_MIN_OPC_8, hqvdp->regs + HQVDP_RD_PLUG_MIN_OPC); |
| writel(PLUG_MAX_OPC_64, hqvdp->regs + HQVDP_RD_PLUG_MAX_OPC); |
| writel(PLUG_MAX_CHK_2X, hqvdp->regs + HQVDP_RD_PLUG_MAX_CHK); |
| writel(PLUG_MAX_MSG_1X, hqvdp->regs + HQVDP_RD_PLUG_MAX_MSG); |
| writel(PLUG_MIN_SPACE_1, hqvdp->regs + HQVDP_RD_PLUG_MIN_SPACE); |
| writel(PLUG_CONTROL_ENABLE, hqvdp->regs + HQVDP_RD_PLUG_CONTROL); |
| |
| writel(PLUG_PAGE_SIZE_256, hqvdp->regs + HQVDP_WR_PLUG_PAGE_SIZE); |
| writel(PLUG_MIN_OPC_8, hqvdp->regs + HQVDP_WR_PLUG_MIN_OPC); |
| writel(PLUG_MAX_OPC_64, hqvdp->regs + HQVDP_WR_PLUG_MAX_OPC); |
| writel(PLUG_MAX_CHK_2X, hqvdp->regs + HQVDP_WR_PLUG_MAX_CHK); |
| writel(PLUG_MAX_MSG_1X, hqvdp->regs + HQVDP_WR_PLUG_MAX_MSG); |
| writel(PLUG_MIN_SPACE_1, hqvdp->regs + HQVDP_WR_PLUG_MIN_SPACE); |
| writel(PLUG_CONTROL_ENABLE, hqvdp->regs + HQVDP_WR_PLUG_CONTROL); |
| } |
| |
| /** |
| * sti_hqvdp_start_xp70 |
| * @hqvdp: hqvdp pointer |
| * |
| * Run the xP70 initialization sequence |
| */ |
| static void sti_hqvdp_start_xp70(struct sti_hqvdp *hqvdp) |
| { |
| const struct firmware *firmware; |
| u32 *fw_rd_plug, *fw_wr_plug, *fw_pmem, *fw_dmem; |
| u8 *data; |
| int i; |
| struct fw_header { |
| int rd_size; |
| int wr_size; |
| int pmem_size; |
| int dmem_size; |
| } *header; |
| |
| DRM_DEBUG_DRIVER("\n"); |
| |
| if (hqvdp->xp70_initialized) { |
| DRM_DEBUG_DRIVER("HQVDP XP70 already initialized\n"); |
| return; |
| } |
| |
| /* Request firmware */ |
| if (request_firmware(&firmware, HQVDP_FMW_NAME, hqvdp->dev)) { |
| DRM_ERROR("Can't get HQVDP firmware\n"); |
| return; |
| } |
| |
| /* Check firmware parts */ |
| if (!firmware) { |
| DRM_ERROR("Firmware not available\n"); |
| return; |
| } |
| |
| header = (struct fw_header *)firmware->data; |
| if (firmware->size < sizeof(*header)) { |
| DRM_ERROR("Invalid firmware size (%zu)\n", firmware->size); |
| goto out; |
| } |
| if ((sizeof(*header) + header->rd_size + header->wr_size + |
| header->pmem_size + header->dmem_size) != firmware->size) { |
| DRM_ERROR("Invalid fmw structure (%zu+%d+%d+%d+%d != %zu)\n", |
| sizeof(*header), header->rd_size, header->wr_size, |
| header->pmem_size, header->dmem_size, |
| firmware->size); |
| goto out; |
| } |
| |
| data = (u8 *)firmware->data; |
| data += sizeof(*header); |
| fw_rd_plug = (void *)data; |
| data += header->rd_size; |
| fw_wr_plug = (void *)data; |
| data += header->wr_size; |
| fw_pmem = (void *)data; |
| data += header->pmem_size; |
| fw_dmem = (void *)data; |
| |
| /* Enable clock */ |
| if (clk_prepare_enable(hqvdp->clk)) |
| DRM_ERROR("Failed to prepare/enable HQVDP clk\n"); |
| |
| /* Reset */ |
| writel(SW_RESET_CTRL_FULL, hqvdp->regs + HQVDP_MBX_SW_RESET_CTRL); |
| |
| for (i = 0; i < POLL_MAX_ATTEMPT; i++) { |
| if (readl(hqvdp->regs + HQVDP_MBX_STARTUP_CTRL1) |
| & STARTUP_CTRL1_RST_DONE) |
| break; |
| msleep(POLL_DELAY_MS); |
| } |
| if (i == POLL_MAX_ATTEMPT) { |
| DRM_ERROR("Could not reset\n"); |
| clk_disable_unprepare(hqvdp->clk); |
| goto out; |
| } |
| |
| /* Init Read & Write plugs */ |
| for (i = 0; i < header->rd_size / 4; i++) |
| writel(fw_rd_plug[i], hqvdp->regs + HQVDP_RD_PLUG + i * 4); |
| for (i = 0; i < header->wr_size / 4; i++) |
| writel(fw_wr_plug[i], hqvdp->regs + HQVDP_WR_PLUG + i * 4); |
| |
| sti_hqvdp_init_plugs(hqvdp); |
| |
| /* Authorize Idle Mode */ |
| writel(STARTUP_CTRL1_AUTH_IDLE, hqvdp->regs + HQVDP_MBX_STARTUP_CTRL1); |
| |
| /* Prevent VTG interruption during the boot */ |
| writel(SOFT_VSYNC_SW_CTRL_IRQ, hqvdp->regs + HQVDP_MBX_SOFT_VSYNC); |
| writel(0, hqvdp->regs + HQVDP_MBX_NEXT_CMD); |
| |
| /* Download PMEM & DMEM */ |
| for (i = 0; i < header->pmem_size / 4; i++) |
| writel(fw_pmem[i], hqvdp->regs + HQVDP_PMEM + i * 4); |
| for (i = 0; i < header->dmem_size / 4; i++) |
| writel(fw_dmem[i], hqvdp->regs + HQVDP_DMEM + i * 4); |
| |
| /* Enable fetch */ |
| writel(STARTUP_CTRL2_FETCH_EN, hqvdp->regs + HQVDP_MBX_STARTUP_CTRL2); |
| |
| /* Wait end of boot */ |
| for (i = 0; i < POLL_MAX_ATTEMPT; i++) { |
| if (readl(hqvdp->regs + HQVDP_MBX_INFO_XP70) |
| & INFO_XP70_FW_READY) |
| break; |
| msleep(POLL_DELAY_MS); |
| } |
| if (i == POLL_MAX_ATTEMPT) { |
| DRM_ERROR("Could not boot\n"); |
| clk_disable_unprepare(hqvdp->clk); |
| goto out; |
| } |
| |
| /* Launch Vsync */ |
| writel(SOFT_VSYNC_HW, hqvdp->regs + HQVDP_MBX_SOFT_VSYNC); |
| |
| DRM_INFO("HQVDP XP70 initialized\n"); |
| |
| hqvdp->xp70_initialized = true; |
| |
| out: |
| release_firmware(firmware); |
| } |
| |
| static int sti_hqvdp_atomic_check(struct drm_plane *drm_plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, |
| drm_plane); |
| struct sti_plane *plane = to_sti_plane(drm_plane); |
| struct sti_hqvdp *hqvdp = to_sti_hqvdp(plane); |
| struct drm_crtc *crtc = new_plane_state->crtc; |
| struct drm_framebuffer *fb = new_plane_state->fb; |
| struct drm_crtc_state *crtc_state; |
| struct drm_display_mode *mode; |
| int dst_x, dst_y, dst_w, dst_h; |
| int src_x, src_y, src_w, src_h; |
| |
| /* no need for further checks if the plane is being disabled */ |
| if (!crtc || !fb) |
| return 0; |
| |
| crtc_state = drm_atomic_get_crtc_state(state, crtc); |
| mode = &crtc_state->mode; |
| dst_x = new_plane_state->crtc_x; |
| dst_y = new_plane_state->crtc_y; |
| dst_w = clamp_val(new_plane_state->crtc_w, 0, mode->hdisplay - dst_x); |
| dst_h = clamp_val(new_plane_state->crtc_h, 0, mode->vdisplay - dst_y); |
| /* src_x are in 16.16 format */ |
| src_x = new_plane_state->src_x >> 16; |
| src_y = new_plane_state->src_y >> 16; |
| src_w = new_plane_state->src_w >> 16; |
| src_h = new_plane_state->src_h >> 16; |
| |
| if (mode->clock && !sti_hqvdp_check_hw_scaling(hqvdp, mode, |
| src_w, src_h, |
| dst_w, dst_h)) { |
| DRM_ERROR("Scaling beyond HW capabilities\n"); |
| return -EINVAL; |
| } |
| |
| if (!drm_fb_dma_get_gem_obj(fb, 0)) { |
| DRM_ERROR("Can't get DMA GEM object for fb\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Input / output size |
| * Align to upper even value |
| */ |
| dst_w = ALIGN(dst_w, 2); |
| dst_h = ALIGN(dst_h, 2); |
| |
| if ((src_w > MAX_WIDTH) || (src_w < MIN_WIDTH) || |
| (src_h > MAX_HEIGHT) || (src_h < MIN_HEIGHT) || |
| (dst_w > MAX_WIDTH) || (dst_w < MIN_WIDTH) || |
| (dst_h > MAX_HEIGHT) || (dst_h < MIN_HEIGHT)) { |
| DRM_ERROR("Invalid in/out size %dx%d -> %dx%d\n", |
| src_w, src_h, |
| dst_w, dst_h); |
| return -EINVAL; |
| } |
| |
| if (!hqvdp->xp70_initialized) |
| /* Start HQVDP XP70 coprocessor */ |
| sti_hqvdp_start_xp70(hqvdp); |
| |
| if (!hqvdp->vtg_registered) { |
| /* Prevent VTG shutdown */ |
| if (clk_prepare_enable(hqvdp->clk_pix_main)) { |
| DRM_ERROR("Failed to prepare/enable pix main clk\n"); |
| return -EINVAL; |
| } |
| |
| /* Register VTG Vsync callback to handle bottom fields */ |
| if (sti_vtg_register_client(hqvdp->vtg, |
| &hqvdp->vtg_nb, |
| crtc)) { |
| DRM_ERROR("Cannot register VTG notifier\n"); |
| clk_disable_unprepare(hqvdp->clk_pix_main); |
| return -EINVAL; |
| } |
| hqvdp->vtg_registered = true; |
| } |
| |
| DRM_DEBUG_KMS("CRTC:%d (%s) drm plane:%d (%s)\n", |
| crtc->base.id, sti_mixer_to_str(to_sti_mixer(crtc)), |
| drm_plane->base.id, sti_plane_to_str(plane)); |
| DRM_DEBUG_KMS("%s dst=(%dx%d)@(%d,%d) - src=(%dx%d)@(%d,%d)\n", |
| sti_plane_to_str(plane), |
| dst_w, dst_h, dst_x, dst_y, |
| src_w, src_h, src_x, src_y); |
| |
| return 0; |
| } |
| |
| static void sti_hqvdp_atomic_update(struct drm_plane *drm_plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *oldstate = drm_atomic_get_old_plane_state(state, |
| drm_plane); |
| struct drm_plane_state *newstate = drm_atomic_get_new_plane_state(state, |
| drm_plane); |
| struct sti_plane *plane = to_sti_plane(drm_plane); |
| struct sti_hqvdp *hqvdp = to_sti_hqvdp(plane); |
| struct drm_crtc *crtc = newstate->crtc; |
| struct drm_framebuffer *fb = newstate->fb; |
| struct drm_display_mode *mode; |
| int dst_x, dst_y, dst_w, dst_h; |
| int src_x, src_y, src_w, src_h; |
| struct drm_gem_dma_object *dma_obj; |
| struct sti_hqvdp_cmd *cmd; |
| int scale_h, scale_v; |
| int cmd_offset; |
| |
| if (!crtc || !fb) |
| return; |
| |
| if ((oldstate->fb == newstate->fb) && |
| (oldstate->crtc_x == newstate->crtc_x) && |
| (oldstate->crtc_y == newstate->crtc_y) && |
| (oldstate->crtc_w == newstate->crtc_w) && |
| (oldstate->crtc_h == newstate->crtc_h) && |
| (oldstate->src_x == newstate->src_x) && |
| (oldstate->src_y == newstate->src_y) && |
| (oldstate->src_w == newstate->src_w) && |
| (oldstate->src_h == newstate->src_h)) { |
| /* No change since last update, do not post cmd */ |
| DRM_DEBUG_DRIVER("No change, not posting cmd\n"); |
| plane->status = STI_PLANE_UPDATED; |
| return; |
| } |
| |
| mode = &crtc->mode; |
| dst_x = newstate->crtc_x; |
| dst_y = newstate->crtc_y; |
| dst_w = clamp_val(newstate->crtc_w, 0, mode->hdisplay - dst_x); |
| dst_h = clamp_val(newstate->crtc_h, 0, mode->vdisplay - dst_y); |
| /* src_x are in 16.16 format */ |
| src_x = newstate->src_x >> 16; |
| src_y = newstate->src_y >> 16; |
| src_w = newstate->src_w >> 16; |
| src_h = newstate->src_h >> 16; |
| |
| cmd_offset = sti_hqvdp_get_free_cmd(hqvdp); |
| if (cmd_offset == -1) { |
| DRM_DEBUG_DRIVER("Warning: no cmd, will skip frame\n"); |
| return; |
| } |
| cmd = hqvdp->hqvdp_cmd + cmd_offset; |
| |
| /* Static parameters, defaulting to progressive mode */ |
| cmd->top.config = TOP_CONFIG_PROGRESSIVE; |
| cmd->top.mem_format = TOP_MEM_FORMAT_DFLT; |
| cmd->hvsrc.param_ctrl = HVSRC_PARAM_CTRL_DFLT; |
| cmd->csdi.config = CSDI_CONFIG_PROG; |
| |
| /* VC1RE, FMD bypassed : keep everything set to 0 |
| * IQI/P2I bypassed */ |
| cmd->iqi.config = IQI_CONFIG_DFLT; |
| cmd->iqi.con_bri = IQI_CON_BRI_DFLT; |
| cmd->iqi.sat_gain = IQI_SAT_GAIN_DFLT; |
| cmd->iqi.pxf_conf = IQI_PXF_CONF_DFLT; |
| |
| dma_obj = drm_fb_dma_get_gem_obj(fb, 0); |
| |
| DRM_DEBUG_DRIVER("drm FB:%d format:%.4s phys@:0x%lx\n", fb->base.id, |
| (char *)&fb->format->format, |
| (unsigned long) dma_obj->dma_addr); |
| |
| /* Buffer planes address */ |
| cmd->top.current_luma = (u32) dma_obj->dma_addr + fb->offsets[0]; |
| cmd->top.current_chroma = (u32) dma_obj->dma_addr + fb->offsets[1]; |
| |
| /* Pitches */ |
| cmd->top.luma_processed_pitch = fb->pitches[0]; |
| cmd->top.luma_src_pitch = fb->pitches[0]; |
| cmd->top.chroma_processed_pitch = fb->pitches[1]; |
| cmd->top.chroma_src_pitch = fb->pitches[1]; |
| |
| /* Input / output size |
| * Align to upper even value */ |
| dst_w = ALIGN(dst_w, 2); |
| dst_h = ALIGN(dst_h, 2); |
| |
| cmd->top.input_viewport_size = src_h << 16 | src_w; |
| cmd->top.input_frame_size = src_h << 16 | src_w; |
| cmd->hvsrc.output_picture_size = dst_h << 16 | dst_w; |
| cmd->top.input_viewport_ori = src_y << 16 | src_x; |
| |
| /* Handle interlaced */ |
| if (fb->flags & DRM_MODE_FB_INTERLACED) { |
| /* Top field to display */ |
| cmd->top.config = TOP_CONFIG_INTER_TOP; |
| |
| /* Update pitches and vert size */ |
| cmd->top.input_frame_size = (src_h / 2) << 16 | src_w; |
| cmd->top.luma_processed_pitch *= 2; |
| cmd->top.luma_src_pitch *= 2; |
| cmd->top.chroma_processed_pitch *= 2; |
| cmd->top.chroma_src_pitch *= 2; |
| |
| /* Enable directional deinterlacing processing */ |
| cmd->csdi.config = CSDI_CONFIG_INTER_DIR; |
| cmd->csdi.config2 = CSDI_CONFIG2_DFLT; |
| cmd->csdi.dcdi_config = CSDI_DCDI_CONFIG_DFLT; |
| } |
| |
| /* Update hvsrc lut coef */ |
| scale_h = SCALE_FACTOR * dst_w / src_w; |
| sti_hqvdp_update_hvsrc(HVSRC_HORI, scale_h, &cmd->hvsrc); |
| |
| scale_v = SCALE_FACTOR * dst_h / src_h; |
| sti_hqvdp_update_hvsrc(HVSRC_VERT, scale_v, &cmd->hvsrc); |
| |
| writel(hqvdp->hqvdp_cmd_paddr + cmd_offset, |
| hqvdp->regs + HQVDP_MBX_NEXT_CMD); |
| |
| /* Interlaced : get ready to display the bottom field at next Vsync */ |
| if (fb->flags & DRM_MODE_FB_INTERLACED) |
| hqvdp->btm_field_pending = true; |
| |
| dev_dbg(hqvdp->dev, "%s Posted command:0x%x\n", |
| __func__, hqvdp->hqvdp_cmd_paddr + cmd_offset); |
| |
| sti_plane_update_fps(plane, true, true); |
| |
| plane->status = STI_PLANE_UPDATED; |
| } |
| |
| static void sti_hqvdp_atomic_disable(struct drm_plane *drm_plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *oldstate = drm_atomic_get_old_plane_state(state, |
| drm_plane); |
| struct sti_plane *plane = to_sti_plane(drm_plane); |
| |
| if (!oldstate->crtc) { |
| DRM_DEBUG_DRIVER("drm plane:%d not enabled\n", |
| drm_plane->base.id); |
| return; |
| } |
| |
| DRM_DEBUG_DRIVER("CRTC:%d (%s) drm plane:%d (%s)\n", |
| oldstate->crtc->base.id, |
| sti_mixer_to_str(to_sti_mixer(oldstate->crtc)), |
| drm_plane->base.id, sti_plane_to_str(plane)); |
| |
| plane->status = STI_PLANE_DISABLING; |
| } |
| |
| static const struct drm_plane_helper_funcs sti_hqvdp_helpers_funcs = { |
| .atomic_check = sti_hqvdp_atomic_check, |
| .atomic_update = sti_hqvdp_atomic_update, |
| .atomic_disable = sti_hqvdp_atomic_disable, |
| }; |
| |
| static int sti_hqvdp_late_register(struct drm_plane *drm_plane) |
| { |
| struct sti_plane *plane = to_sti_plane(drm_plane); |
| struct sti_hqvdp *hqvdp = to_sti_hqvdp(plane); |
| |
| hqvdp_debugfs_init(hqvdp, drm_plane->dev->primary); |
| |
| return 0; |
| } |
| |
| static const struct drm_plane_funcs sti_hqvdp_plane_helpers_funcs = { |
| .update_plane = drm_atomic_helper_update_plane, |
| .disable_plane = drm_atomic_helper_disable_plane, |
| .destroy = drm_plane_cleanup, |
| .reset = drm_atomic_helper_plane_reset, |
| .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, |
| .late_register = sti_hqvdp_late_register, |
| }; |
| |
| static struct drm_plane *sti_hqvdp_create(struct drm_device *drm_dev, |
| struct device *dev, int desc) |
| { |
| struct sti_hqvdp *hqvdp = dev_get_drvdata(dev); |
| int res; |
| |
| hqvdp->plane.desc = desc; |
| hqvdp->plane.status = STI_PLANE_DISABLED; |
| |
| sti_hqvdp_init(hqvdp); |
| |
| res = drm_universal_plane_init(drm_dev, &hqvdp->plane.drm_plane, 1, |
| &sti_hqvdp_plane_helpers_funcs, |
| hqvdp_supported_formats, |
| ARRAY_SIZE(hqvdp_supported_formats), |
| NULL, DRM_PLANE_TYPE_OVERLAY, NULL); |
| if (res) { |
| DRM_ERROR("Failed to initialize universal plane\n"); |
| return NULL; |
| } |
| |
| drm_plane_helper_add(&hqvdp->plane.drm_plane, &sti_hqvdp_helpers_funcs); |
| |
| sti_plane_init_property(&hqvdp->plane, DRM_PLANE_TYPE_OVERLAY); |
| |
| return &hqvdp->plane.drm_plane; |
| } |
| |
| static int sti_hqvdp_bind(struct device *dev, struct device *master, void *data) |
| { |
| struct sti_hqvdp *hqvdp = dev_get_drvdata(dev); |
| struct drm_device *drm_dev = data; |
| struct drm_plane *plane; |
| |
| DRM_DEBUG_DRIVER("\n"); |
| |
| hqvdp->drm_dev = drm_dev; |
| |
| /* Create HQVDP plane once xp70 is initialized */ |
| plane = sti_hqvdp_create(drm_dev, hqvdp->dev, STI_HQVDP_0); |
| if (!plane) |
| DRM_ERROR("Can't create HQVDP plane\n"); |
| |
| return 0; |
| } |
| |
| static void sti_hqvdp_unbind(struct device *dev, |
| struct device *master, void *data) |
| { |
| /* do nothing */ |
| } |
| |
| static const struct component_ops sti_hqvdp_ops = { |
| .bind = sti_hqvdp_bind, |
| .unbind = sti_hqvdp_unbind, |
| }; |
| |
| static int sti_hqvdp_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *vtg_np; |
| struct sti_hqvdp *hqvdp; |
| struct resource *res; |
| |
| DRM_DEBUG_DRIVER("\n"); |
| |
| hqvdp = devm_kzalloc(dev, sizeof(*hqvdp), GFP_KERNEL); |
| if (!hqvdp) { |
| DRM_ERROR("Failed to allocate HQVDP context\n"); |
| return -ENOMEM; |
| } |
| |
| hqvdp->dev = dev; |
| |
| /* Get Memory resources */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| DRM_ERROR("Get memory resource failed\n"); |
| return -ENXIO; |
| } |
| hqvdp->regs = devm_ioremap(dev, res->start, resource_size(res)); |
| if (!hqvdp->regs) { |
| DRM_ERROR("Register mapping failed\n"); |
| return -ENXIO; |
| } |
| |
| /* Get clock resources */ |
| hqvdp->clk = devm_clk_get(dev, "hqvdp"); |
| hqvdp->clk_pix_main = devm_clk_get(dev, "pix_main"); |
| if (IS_ERR(hqvdp->clk) || IS_ERR(hqvdp->clk_pix_main)) { |
| DRM_ERROR("Cannot get clocks\n"); |
| return -ENXIO; |
| } |
| |
| /* Get reset resources */ |
| hqvdp->reset = devm_reset_control_get(dev, "hqvdp"); |
| if (!IS_ERR(hqvdp->reset)) |
| reset_control_deassert(hqvdp->reset); |
| |
| vtg_np = of_parse_phandle(pdev->dev.of_node, "st,vtg", 0); |
| if (vtg_np) |
| hqvdp->vtg = of_vtg_find(vtg_np); |
| of_node_put(vtg_np); |
| |
| platform_set_drvdata(pdev, hqvdp); |
| |
| return component_add(&pdev->dev, &sti_hqvdp_ops); |
| } |
| |
| static void sti_hqvdp_remove(struct platform_device *pdev) |
| { |
| component_del(&pdev->dev, &sti_hqvdp_ops); |
| } |
| |
| static const struct of_device_id hqvdp_of_match[] = { |
| { .compatible = "st,stih407-hqvdp", }, |
| { /* end node */ } |
| }; |
| MODULE_DEVICE_TABLE(of, hqvdp_of_match); |
| |
| struct platform_driver sti_hqvdp_driver = { |
| .driver = { |
| .name = "sti-hqvdp", |
| .of_match_table = hqvdp_of_match, |
| }, |
| .probe = sti_hqvdp_probe, |
| .remove_new = sti_hqvdp_remove, |
| }; |
| |
| MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@st.com>"); |
| MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver"); |
| MODULE_LICENSE("GPL"); |