| Broadcom Kona Family CPU Enable Method |
| -------------------------------------- |
| This binding defines the enable method used for starting secondary |
| CPUs in the following Broadcom SoCs: |
| BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664 |
| |
| The enable method is specified by defining the following required |
| properties in the "cpus" device tree node: |
| - enable-method = "brcm,bcm11351-cpu-method"; |
| - secondary-boot-reg = <...>; |
| |
| The secondary-boot-reg property is a u32 value that specifies the |
| physical address of the register used to request the ROM holding pen |
| code release a secondary CPU. The value written to the register is |
| formed by encoding the target CPU id into the low bits of the |
| physical start address it should jump to. |
| |
| Example: |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-method = "brcm,bcm11351-cpu-method"; |
| secondary-boot-reg = <0x3500417c>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0>; |
| }; |
| |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <1>; |
| }; |
| }; |
