| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter |
| * |
| * Copyright 2016 Qtechnology A/S |
| * 2016 Ricardo Ribalda <ribalda@kernel.org> |
| */ |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/spi/spi.h> |
| #include <linux/bitops.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/platform_data/ad5761.h> |
| |
| #define AD5761_ADDR(addr) ((addr & 0xf) << 16) |
| #define AD5761_ADDR_NOOP 0x0 |
| #define AD5761_ADDR_DAC_WRITE 0x3 |
| #define AD5761_ADDR_CTRL_WRITE_REG 0x4 |
| #define AD5761_ADDR_SW_DATA_RESET 0x7 |
| #define AD5761_ADDR_DAC_READ 0xb |
| #define AD5761_ADDR_CTRL_READ_REG 0xc |
| #define AD5761_ADDR_SW_FULL_RESET 0xf |
| |
| #define AD5761_CTRL_USE_INTVREF BIT(5) |
| #define AD5761_CTRL_ETS BIT(6) |
| |
| /** |
| * struct ad5761_chip_info - chip specific information |
| * @int_vref: Value of the internal reference voltage in mV - 0 if external |
| * reference voltage is used |
| * @channel: channel specification |
| */ |
| |
| struct ad5761_chip_info { |
| unsigned long int_vref; |
| const struct iio_chan_spec channel; |
| }; |
| |
| struct ad5761_range_params { |
| int m; |
| int c; |
| }; |
| |
| enum ad5761_supported_device_ids { |
| ID_AD5721, |
| ID_AD5721R, |
| ID_AD5761, |
| ID_AD5761R, |
| }; |
| |
| /** |
| * struct ad5761_state - driver instance specific data |
| * @spi: spi_device |
| * @vref_reg: reference voltage regulator |
| * @use_intref: true when the internal voltage reference is used |
| * @vref: actual voltage reference in mVolts |
| * @range: output range mode used |
| * @lock: lock to protect the data buffer during SPI ops |
| * @data: cache aligned spi buffer |
| */ |
| struct ad5761_state { |
| struct spi_device *spi; |
| struct regulator *vref_reg; |
| struct mutex lock; |
| |
| bool use_intref; |
| int vref; |
| enum ad5761_voltage_range range; |
| |
| /* |
| * DMA (thus cache coherency maintenance) requires the |
| * transfer buffers to live in their own cache lines. |
| */ |
| union { |
| __be32 d32; |
| u8 d8[4]; |
| } data[3] ____cacheline_aligned; |
| }; |
| |
| static const struct ad5761_range_params ad5761_range_params[] = { |
| [AD5761_VOLTAGE_RANGE_M10V_10V] = { |
| .m = 80, |
| .c = 40, |
| }, |
| [AD5761_VOLTAGE_RANGE_0V_10V] = { |
| .m = 40, |
| .c = 0, |
| }, |
| [AD5761_VOLTAGE_RANGE_M5V_5V] = { |
| .m = 40, |
| .c = 20, |
| }, |
| [AD5761_VOLTAGE_RANGE_0V_5V] = { |
| .m = 20, |
| .c = 0, |
| }, |
| [AD5761_VOLTAGE_RANGE_M2V5_7V5] = { |
| .m = 40, |
| .c = 10, |
| }, |
| [AD5761_VOLTAGE_RANGE_M3V_3V] = { |
| .m = 24, |
| .c = 12, |
| }, |
| [AD5761_VOLTAGE_RANGE_0V_16V] = { |
| .m = 64, |
| .c = 0, |
| }, |
| [AD5761_VOLTAGE_RANGE_0V_20V] = { |
| .m = 80, |
| .c = 0, |
| }, |
| }; |
| |
| static int _ad5761_spi_write(struct ad5761_state *st, u8 addr, u16 val) |
| { |
| st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr) | val); |
| |
| return spi_write(st->spi, &st->data[0].d8[1], 3); |
| } |
| |
| static int ad5761_spi_write(struct iio_dev *indio_dev, u8 addr, u16 val) |
| { |
| struct ad5761_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&st->lock); |
| ret = _ad5761_spi_write(st, addr, val); |
| mutex_unlock(&st->lock); |
| |
| return ret; |
| } |
| |
| static int _ad5761_spi_read(struct ad5761_state *st, u8 addr, u16 *val) |
| { |
| int ret; |
| struct spi_transfer xfers[] = { |
| { |
| .tx_buf = &st->data[0].d8[1], |
| .bits_per_word = 8, |
| .len = 3, |
| .cs_change = true, |
| }, { |
| .tx_buf = &st->data[1].d8[1], |
| .rx_buf = &st->data[2].d8[1], |
| .bits_per_word = 8, |
| .len = 3, |
| }, |
| }; |
| |
| st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr)); |
| st->data[1].d32 = cpu_to_be32(AD5761_ADDR(AD5761_ADDR_NOOP)); |
| |
| ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers)); |
| |
| *val = be32_to_cpu(st->data[2].d32); |
| |
| return ret; |
| } |
| |
| static int ad5761_spi_read(struct iio_dev *indio_dev, u8 addr, u16 *val) |
| { |
| struct ad5761_state *st = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&st->lock); |
| ret = _ad5761_spi_read(st, addr, val); |
| mutex_unlock(&st->lock); |
| |
| return ret; |
| } |
| |
| static int ad5761_spi_set_range(struct ad5761_state *st, |
| enum ad5761_voltage_range range) |
| { |
| u16 aux; |
| int ret; |
| |
| aux = (range & 0x7) | AD5761_CTRL_ETS; |
| |
| if (st->use_intref) |
| aux |= AD5761_CTRL_USE_INTVREF; |
| |
| ret = _ad5761_spi_write(st, AD5761_ADDR_SW_FULL_RESET, 0); |
| if (ret) |
| return ret; |
| |
| ret = _ad5761_spi_write(st, AD5761_ADDR_CTRL_WRITE_REG, aux); |
| if (ret) |
| return ret; |
| |
| st->range = range; |
| |
| return 0; |
| } |
| |
| static int ad5761_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, |
| int *val2, |
| long mask) |
| { |
| struct ad5761_state *st; |
| int ret; |
| u16 aux; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = ad5761_spi_read(indio_dev, AD5761_ADDR_DAC_READ, &aux); |
| if (ret) |
| return ret; |
| *val = aux >> chan->scan_type.shift; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| st = iio_priv(indio_dev); |
| *val = st->vref * ad5761_range_params[st->range].m; |
| *val /= 10; |
| *val2 = chan->scan_type.realbits; |
| return IIO_VAL_FRACTIONAL_LOG2; |
| case IIO_CHAN_INFO_OFFSET: |
| st = iio_priv(indio_dev); |
| *val = -(1 << chan->scan_type.realbits); |
| *val *= ad5761_range_params[st->range].c; |
| *val /= ad5761_range_params[st->range].m; |
| return IIO_VAL_INT; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int ad5761_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, |
| int val2, |
| long mask) |
| { |
| u16 aux; |
| |
| if (mask != IIO_CHAN_INFO_RAW) |
| return -EINVAL; |
| |
| if (val2 || (val << chan->scan_type.shift) > 0xffff || val < 0) |
| return -EINVAL; |
| |
| aux = val << chan->scan_type.shift; |
| |
| return ad5761_spi_write(indio_dev, AD5761_ADDR_DAC_WRITE, aux); |
| } |
| |
| static const struct iio_info ad5761_info = { |
| .read_raw = &ad5761_read_raw, |
| .write_raw = &ad5761_write_raw, |
| }; |
| |
| #define AD5761_CHAN(_bits) { \ |
| .type = IIO_VOLTAGE, \ |
| .output = 1, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_OFFSET), \ |
| .scan_type = { \ |
| .sign = 'u', \ |
| .realbits = (_bits), \ |
| .storagebits = 16, \ |
| .shift = 16 - (_bits), \ |
| }, \ |
| } |
| |
| static const struct ad5761_chip_info ad5761_chip_infos[] = { |
| [ID_AD5721] = { |
| .int_vref = 0, |
| .channel = AD5761_CHAN(12), |
| }, |
| [ID_AD5721R] = { |
| .int_vref = 2500, |
| .channel = AD5761_CHAN(12), |
| }, |
| [ID_AD5761] = { |
| .int_vref = 0, |
| .channel = AD5761_CHAN(16), |
| }, |
| [ID_AD5761R] = { |
| .int_vref = 2500, |
| .channel = AD5761_CHAN(16), |
| }, |
| }; |
| |
| static int ad5761_get_vref(struct ad5761_state *st, |
| const struct ad5761_chip_info *chip_info) |
| { |
| int ret; |
| |
| st->vref_reg = devm_regulator_get_optional(&st->spi->dev, "vref"); |
| if (PTR_ERR(st->vref_reg) == -ENODEV) { |
| /* Use Internal regulator */ |
| if (!chip_info->int_vref) { |
| dev_err(&st->spi->dev, |
| "Voltage reference not found\n"); |
| return -EIO; |
| } |
| |
| st->use_intref = true; |
| st->vref = chip_info->int_vref; |
| return 0; |
| } |
| |
| if (IS_ERR(st->vref_reg)) { |
| dev_err(&st->spi->dev, |
| "Error getting voltage reference regulator\n"); |
| return PTR_ERR(st->vref_reg); |
| } |
| |
| ret = regulator_enable(st->vref_reg); |
| if (ret) { |
| dev_err(&st->spi->dev, |
| "Failed to enable voltage reference\n"); |
| return ret; |
| } |
| |
| ret = regulator_get_voltage(st->vref_reg); |
| if (ret < 0) { |
| dev_err(&st->spi->dev, |
| "Failed to get voltage reference value\n"); |
| goto disable_regulator_vref; |
| } |
| |
| if (ret < 2000000 || ret > 3000000) { |
| dev_warn(&st->spi->dev, |
| "Invalid external voltage ref. value %d uV\n", ret); |
| ret = -EIO; |
| goto disable_regulator_vref; |
| } |
| |
| st->vref = ret / 1000; |
| st->use_intref = false; |
| |
| return 0; |
| |
| disable_regulator_vref: |
| regulator_disable(st->vref_reg); |
| st->vref_reg = NULL; |
| return ret; |
| } |
| |
| static int ad5761_probe(struct spi_device *spi) |
| { |
| struct iio_dev *iio_dev; |
| struct ad5761_state *st; |
| int ret; |
| const struct ad5761_chip_info *chip_info = |
| &ad5761_chip_infos[spi_get_device_id(spi)->driver_data]; |
| enum ad5761_voltage_range voltage_range = AD5761_VOLTAGE_RANGE_0V_5V; |
| struct ad5761_platform_data *pdata = dev_get_platdata(&spi->dev); |
| |
| iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); |
| if (!iio_dev) |
| return -ENOMEM; |
| |
| st = iio_priv(iio_dev); |
| |
| st->spi = spi; |
| spi_set_drvdata(spi, iio_dev); |
| |
| ret = ad5761_get_vref(st, chip_info); |
| if (ret) |
| return ret; |
| |
| if (pdata) |
| voltage_range = pdata->voltage_range; |
| |
| mutex_init(&st->lock); |
| |
| ret = ad5761_spi_set_range(st, voltage_range); |
| if (ret) |
| goto disable_regulator_err; |
| |
| iio_dev->info = &ad5761_info; |
| iio_dev->modes = INDIO_DIRECT_MODE; |
| iio_dev->channels = &chip_info->channel; |
| iio_dev->num_channels = 1; |
| iio_dev->name = spi_get_device_id(st->spi)->name; |
| ret = iio_device_register(iio_dev); |
| if (ret) |
| goto disable_regulator_err; |
| |
| return 0; |
| |
| disable_regulator_err: |
| if (!IS_ERR_OR_NULL(st->vref_reg)) |
| regulator_disable(st->vref_reg); |
| |
| return ret; |
| } |
| |
| static void ad5761_remove(struct spi_device *spi) |
| { |
| struct iio_dev *iio_dev = spi_get_drvdata(spi); |
| struct ad5761_state *st = iio_priv(iio_dev); |
| |
| iio_device_unregister(iio_dev); |
| |
| if (!IS_ERR_OR_NULL(st->vref_reg)) |
| regulator_disable(st->vref_reg); |
| } |
| |
| static const struct spi_device_id ad5761_id[] = { |
| {"ad5721", ID_AD5721}, |
| {"ad5721r", ID_AD5721R}, |
| {"ad5761", ID_AD5761}, |
| {"ad5761r", ID_AD5761R}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(spi, ad5761_id); |
| |
| static struct spi_driver ad5761_driver = { |
| .driver = { |
| .name = "ad5761", |
| }, |
| .probe = ad5761_probe, |
| .remove = ad5761_remove, |
| .id_table = ad5761_id, |
| }; |
| module_spi_driver(ad5761_driver); |
| |
| MODULE_AUTHOR("Ricardo Ribalda <ribalda@kernel.org>"); |
| MODULE_DESCRIPTION("Analog Devices AD5721, AD5721R, AD5761, AD5761R driver"); |
| MODULE_LICENSE("GPL v2"); |