| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * VMware VMCI Driver |
| * |
| * Copyright (C) 2012 VMware, Inc. All rights reserved. |
| */ |
| |
| #include <linux/vmw_vmci_defs.h> |
| #include <linux/vmw_vmci_api.h> |
| #include <linux/highmem.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/pagemap.h> |
| #include <linux/pci.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/uio.h> |
| #include <linux/wait.h> |
| #include <linux/vmalloc.h> |
| #include <linux/skbuff.h> |
| |
| #include "vmci_handle_array.h" |
| #include "vmci_queue_pair.h" |
| #include "vmci_datagram.h" |
| #include "vmci_resource.h" |
| #include "vmci_context.h" |
| #include "vmci_driver.h" |
| #include "vmci_event.h" |
| #include "vmci_route.h" |
| |
| /* |
| * In the following, we will distinguish between two kinds of VMX processes - |
| * the ones with versions lower than VMCI_VERSION_NOVMVM that use specialized |
| * VMCI page files in the VMX and supporting VM to VM communication and the |
| * newer ones that use the guest memory directly. We will in the following |
| * refer to the older VMX versions as old-style VMX'en, and the newer ones as |
| * new-style VMX'en. |
| * |
| * The state transition datagram is as follows (the VMCIQPB_ prefix has been |
| * removed for readability) - see below for more details on the transtions: |
| * |
| * -------------- NEW ------------- |
| * | | |
| * \_/ \_/ |
| * CREATED_NO_MEM <-----------------> CREATED_MEM |
| * | | | |
| * | o-----------------------o | |
| * | | | |
| * \_/ \_/ \_/ |
| * ATTACHED_NO_MEM <----------------> ATTACHED_MEM |
| * | | | |
| * | o----------------------o | |
| * | | | |
| * \_/ \_/ \_/ |
| * SHUTDOWN_NO_MEM <----------------> SHUTDOWN_MEM |
| * | | |
| * | | |
| * -------------> gone <------------- |
| * |
| * In more detail. When a VMCI queue pair is first created, it will be in the |
| * VMCIQPB_NEW state. It will then move into one of the following states: |
| * |
| * - VMCIQPB_CREATED_NO_MEM: this state indicates that either: |
| * |
| * - the created was performed by a host endpoint, in which case there is |
| * no backing memory yet. |
| * |
| * - the create was initiated by an old-style VMX, that uses |
| * vmci_qp_broker_set_page_store to specify the UVAs of the queue pair at |
| * a later point in time. This state can be distinguished from the one |
| * above by the context ID of the creator. A host side is not allowed to |
| * attach until the page store has been set. |
| * |
| * - VMCIQPB_CREATED_MEM: this state is the result when the queue pair |
| * is created by a VMX using the queue pair device backend that |
| * sets the UVAs of the queue pair immediately and stores the |
| * information for later attachers. At this point, it is ready for |
| * the host side to attach to it. |
| * |
| * Once the queue pair is in one of the created states (with the exception of |
| * the case mentioned for older VMX'en above), it is possible to attach to the |
| * queue pair. Again we have two new states possible: |
| * |
| * - VMCIQPB_ATTACHED_MEM: this state can be reached through the following |
| * paths: |
| * |
| * - from VMCIQPB_CREATED_NO_MEM when a new-style VMX allocates a queue |
| * pair, and attaches to a queue pair previously created by the host side. |
| * |
| * - from VMCIQPB_CREATED_MEM when the host side attaches to a queue pair |
| * already created by a guest. |
| * |
| * - from VMCIQPB_ATTACHED_NO_MEM, when an old-style VMX calls |
| * vmci_qp_broker_set_page_store (see below). |
| * |
| * - VMCIQPB_ATTACHED_NO_MEM: If the queue pair already was in the |
| * VMCIQPB_CREATED_NO_MEM due to a host side create, an old-style VMX will |
| * bring the queue pair into this state. Once vmci_qp_broker_set_page_store |
| * is called to register the user memory, the VMCIQPB_ATTACH_MEM state |
| * will be entered. |
| * |
| * From the attached queue pair, the queue pair can enter the shutdown states |
| * when either side of the queue pair detaches. If the guest side detaches |
| * first, the queue pair will enter the VMCIQPB_SHUTDOWN_NO_MEM state, where |
| * the content of the queue pair will no longer be available. If the host |
| * side detaches first, the queue pair will either enter the |
| * VMCIQPB_SHUTDOWN_MEM, if the guest memory is currently mapped, or |
| * VMCIQPB_SHUTDOWN_NO_MEM, if the guest memory is not mapped |
| * (e.g., the host detaches while a guest is stunned). |
| * |
| * New-style VMX'en will also unmap guest memory, if the guest is |
| * quiesced, e.g., during a snapshot operation. In that case, the guest |
| * memory will no longer be available, and the queue pair will transition from |
| * *_MEM state to a *_NO_MEM state. The VMX may later map the memory once more, |
| * in which case the queue pair will transition from the *_NO_MEM state at that |
| * point back to the *_MEM state. Note that the *_NO_MEM state may have changed, |
| * since the peer may have either attached or detached in the meantime. The |
| * values are laid out such that ++ on a state will move from a *_NO_MEM to a |
| * *_MEM state, and vice versa. |
| */ |
| |
| /* The Kernel specific component of the struct vmci_queue structure. */ |
| struct vmci_queue_kern_if { |
| struct mutex __mutex; /* Protects the queue. */ |
| struct mutex *mutex; /* Shared by producer and consumer queues. */ |
| size_t num_pages; /* Number of pages incl. header. */ |
| bool host; /* Host or guest? */ |
| union { |
| struct { |
| dma_addr_t *pas; |
| void **vas; |
| } g; /* Used by the guest. */ |
| struct { |
| struct page **page; |
| struct page **header_page; |
| } h; /* Used by the host. */ |
| } u; |
| }; |
| |
| /* |
| * This structure is opaque to the clients. |
| */ |
| struct vmci_qp { |
| struct vmci_handle handle; |
| struct vmci_queue *produce_q; |
| struct vmci_queue *consume_q; |
| u64 produce_q_size; |
| u64 consume_q_size; |
| u32 peer; |
| u32 flags; |
| u32 priv_flags; |
| bool guest_endpoint; |
| unsigned int blocked; |
| unsigned int generation; |
| wait_queue_head_t event; |
| }; |
| |
| enum qp_broker_state { |
| VMCIQPB_NEW, |
| VMCIQPB_CREATED_NO_MEM, |
| VMCIQPB_CREATED_MEM, |
| VMCIQPB_ATTACHED_NO_MEM, |
| VMCIQPB_ATTACHED_MEM, |
| VMCIQPB_SHUTDOWN_NO_MEM, |
| VMCIQPB_SHUTDOWN_MEM, |
| VMCIQPB_GONE |
| }; |
| |
| #define QPBROKERSTATE_HAS_MEM(_qpb) (_qpb->state == VMCIQPB_CREATED_MEM || \ |
| _qpb->state == VMCIQPB_ATTACHED_MEM || \ |
| _qpb->state == VMCIQPB_SHUTDOWN_MEM) |
| |
| /* |
| * In the queue pair broker, we always use the guest point of view for |
| * the produce and consume queue values and references, e.g., the |
| * produce queue size stored is the guests produce queue size. The |
| * host endpoint will need to swap these around. The only exception is |
| * the local queue pairs on the host, in which case the host endpoint |
| * that creates the queue pair will have the right orientation, and |
| * the attaching host endpoint will need to swap. |
| */ |
| struct qp_entry { |
| struct list_head list_item; |
| struct vmci_handle handle; |
| u32 peer; |
| u32 flags; |
| u64 produce_size; |
| u64 consume_size; |
| u32 ref_count; |
| }; |
| |
| struct qp_broker_entry { |
| struct vmci_resource resource; |
| struct qp_entry qp; |
| u32 create_id; |
| u32 attach_id; |
| enum qp_broker_state state; |
| bool require_trusted_attach; |
| bool created_by_trusted; |
| bool vmci_page_files; /* Created by VMX using VMCI page files */ |
| struct vmci_queue *produce_q; |
| struct vmci_queue *consume_q; |
| struct vmci_queue_header saved_produce_q; |
| struct vmci_queue_header saved_consume_q; |
| vmci_event_release_cb wakeup_cb; |
| void *client_data; |
| void *local_mem; /* Kernel memory for local queue pair */ |
| }; |
| |
| struct qp_guest_endpoint { |
| struct vmci_resource resource; |
| struct qp_entry qp; |
| u64 num_ppns; |
| void *produce_q; |
| void *consume_q; |
| struct ppn_set ppn_set; |
| }; |
| |
| struct qp_list { |
| struct list_head head; |
| struct mutex mutex; /* Protect queue list. */ |
| }; |
| |
| static struct qp_list qp_broker_list = { |
| .head = LIST_HEAD_INIT(qp_broker_list.head), |
| .mutex = __MUTEX_INITIALIZER(qp_broker_list.mutex), |
| }; |
| |
| static struct qp_list qp_guest_endpoints = { |
| .head = LIST_HEAD_INIT(qp_guest_endpoints.head), |
| .mutex = __MUTEX_INITIALIZER(qp_guest_endpoints.mutex), |
| }; |
| |
| #define INVALID_VMCI_GUEST_MEM_ID 0 |
| #define QPE_NUM_PAGES(_QPE) ((u32) \ |
| (DIV_ROUND_UP(_QPE.produce_size, PAGE_SIZE) + \ |
| DIV_ROUND_UP(_QPE.consume_size, PAGE_SIZE) + 2)) |
| #define QP_SIZES_ARE_VALID(_prod_qsize, _cons_qsize) \ |
| ((_prod_qsize) + (_cons_qsize) >= max(_prod_qsize, _cons_qsize) && \ |
| (_prod_qsize) + (_cons_qsize) <= VMCI_MAX_GUEST_QP_MEMORY) |
| |
| /* |
| * Frees kernel VA space for a given queue and its queue header, and |
| * frees physical data pages. |
| */ |
| static void qp_free_queue(void *q, u64 size) |
| { |
| struct vmci_queue *queue = q; |
| |
| if (queue) { |
| u64 i; |
| |
| /* Given size does not include header, so add in a page here. */ |
| for (i = 0; i < DIV_ROUND_UP(size, PAGE_SIZE) + 1; i++) { |
| dma_free_coherent(&vmci_pdev->dev, PAGE_SIZE, |
| queue->kernel_if->u.g.vas[i], |
| queue->kernel_if->u.g.pas[i]); |
| } |
| |
| vfree(queue); |
| } |
| } |
| |
| /* |
| * Allocates kernel queue pages of specified size with IOMMU mappings, |
| * plus space for the queue structure/kernel interface and the queue |
| * header. |
| */ |
| static void *qp_alloc_queue(u64 size, u32 flags) |
| { |
| u64 i; |
| struct vmci_queue *queue; |
| size_t pas_size; |
| size_t vas_size; |
| size_t queue_size = sizeof(*queue) + sizeof(*queue->kernel_if); |
| u64 num_pages; |
| |
| if (size > SIZE_MAX - PAGE_SIZE) |
| return NULL; |
| num_pages = DIV_ROUND_UP(size, PAGE_SIZE) + 1; |
| if (num_pages > |
| (SIZE_MAX - queue_size) / |
| (sizeof(*queue->kernel_if->u.g.pas) + |
| sizeof(*queue->kernel_if->u.g.vas))) |
| return NULL; |
| |
| pas_size = num_pages * sizeof(*queue->kernel_if->u.g.pas); |
| vas_size = num_pages * sizeof(*queue->kernel_if->u.g.vas); |
| queue_size += pas_size + vas_size; |
| |
| queue = vmalloc(queue_size); |
| if (!queue) |
| return NULL; |
| |
| queue->q_header = NULL; |
| queue->saved_header = NULL; |
| queue->kernel_if = (struct vmci_queue_kern_if *)(queue + 1); |
| queue->kernel_if->mutex = NULL; |
| queue->kernel_if->num_pages = num_pages; |
| queue->kernel_if->u.g.pas = (dma_addr_t *)(queue->kernel_if + 1); |
| queue->kernel_if->u.g.vas = |
| (void **)((u8 *)queue->kernel_if->u.g.pas + pas_size); |
| queue->kernel_if->host = false; |
| |
| for (i = 0; i < num_pages; i++) { |
| queue->kernel_if->u.g.vas[i] = |
| dma_alloc_coherent(&vmci_pdev->dev, PAGE_SIZE, |
| &queue->kernel_if->u.g.pas[i], |
| GFP_KERNEL); |
| if (!queue->kernel_if->u.g.vas[i]) { |
| /* Size excl. the header. */ |
| qp_free_queue(queue, i * PAGE_SIZE); |
| return NULL; |
| } |
| } |
| |
| /* Queue header is the first page. */ |
| queue->q_header = queue->kernel_if->u.g.vas[0]; |
| |
| return queue; |
| } |
| |
| /* |
| * Copies from a given buffer or iovector to a VMCI Queue. Uses |
| * kmap()/kunmap() to dynamically map/unmap required portions of the queue |
| * by traversing the offset -> page translation structure for the queue. |
| * Assumes that offset + size does not wrap around in the queue. |
| */ |
| static int qp_memcpy_to_queue_iter(struct vmci_queue *queue, |
| u64 queue_offset, |
| struct iov_iter *from, |
| size_t size) |
| { |
| struct vmci_queue_kern_if *kernel_if = queue->kernel_if; |
| size_t bytes_copied = 0; |
| |
| while (bytes_copied < size) { |
| const u64 page_index = |
| (queue_offset + bytes_copied) / PAGE_SIZE; |
| const size_t page_offset = |
| (queue_offset + bytes_copied) & (PAGE_SIZE - 1); |
| void *va; |
| size_t to_copy; |
| |
| if (kernel_if->host) |
| va = kmap(kernel_if->u.h.page[page_index]); |
| else |
| va = kernel_if->u.g.vas[page_index + 1]; |
| /* Skip header. */ |
| |
| if (size - bytes_copied > PAGE_SIZE - page_offset) |
| /* Enough payload to fill up from this page. */ |
| to_copy = PAGE_SIZE - page_offset; |
| else |
| to_copy = size - bytes_copied; |
| |
| if (!copy_from_iter_full((u8 *)va + page_offset, to_copy, |
| from)) { |
| if (kernel_if->host) |
| kunmap(kernel_if->u.h.page[page_index]); |
| return VMCI_ERROR_INVALID_ARGS; |
| } |
| bytes_copied += to_copy; |
| if (kernel_if->host) |
| kunmap(kernel_if->u.h.page[page_index]); |
| } |
| |
| return VMCI_SUCCESS; |
| } |
| |
| /* |
| * Copies to a given buffer or iovector from a VMCI Queue. Uses |
| * kmap()/kunmap() to dynamically map/unmap required portions of the queue |
| * by traversing the offset -> page translation structure for the queue. |
| * Assumes that offset + size does not wrap around in the queue. |
| */ |
| static int qp_memcpy_from_queue_iter(struct iov_iter *to, |
| const struct vmci_queue *queue, |
| u64 queue_offset, size_t size) |
| { |
| struct vmci_queue_kern_if *kernel_if = queue->kernel_if; |
| size_t bytes_copied = 0; |
| |
| while (bytes_copied < size) { |
| const u64 page_index = |
| (queue_offset + bytes_copied) / PAGE_SIZE; |
| const size_t page_offset = |
| (queue_offset + bytes_copied) & (PAGE_SIZE - 1); |
| void *va; |
| size_t to_copy; |
| int err; |
| |
| if (kernel_if->host) |
| va = kmap(kernel_if->u.h.page[page_index]); |
| else |
| va = kernel_if->u.g.vas[page_index + 1]; |
| /* Skip header. */ |
| |
| if (size - bytes_copied > PAGE_SIZE - page_offset) |
| /* Enough payload to fill up this page. */ |
| to_copy = PAGE_SIZE - page_offset; |
| else |
| to_copy = size - bytes_copied; |
| |
| err = copy_to_iter((u8 *)va + page_offset, to_copy, to); |
| if (err != to_copy) { |
| if (kernel_if->host) |
| kunmap(kernel_if->u.h.page[page_index]); |
| return VMCI_ERROR_INVALID_ARGS; |
| } |
| bytes_copied += to_copy; |
| if (kernel_if->host) |
| kunmap(kernel_if->u.h.page[page_index]); |
| } |
| |
| return VMCI_SUCCESS; |
| } |
| |
| /* |
| * Allocates two list of PPNs --- one for the pages in the produce queue, |
| * and the other for the pages in the consume queue. Intializes the list |
| * of PPNs with the page frame numbers of the KVA for the two queues (and |
| * the queue headers). |
| */ |
| static int qp_alloc_ppn_set(void *prod_q, |
| u64 num_produce_pages, |
| void *cons_q, |
| u64 num_consume_pages, struct ppn_set *ppn_set) |
| { |
| u64 *produce_ppns; |
| u64 *consume_ppns; |
| struct vmci_queue *produce_q = prod_q; |
| struct vmci_queue *consume_q = cons_q; |
| u64 i; |
| |
| if (!produce_q || !num_produce_pages || !consume_q || |
| !num_consume_pages || !ppn_set) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| if (ppn_set->initialized) |
| return VMCI_ERROR_ALREADY_EXISTS; |
| |
| produce_ppns = |
| kmalloc_array(num_produce_pages, sizeof(*produce_ppns), |
| GFP_KERNEL); |
| if (!produce_ppns) |
| return VMCI_ERROR_NO_MEM; |
| |
| consume_ppns = |
| kmalloc_array(num_consume_pages, sizeof(*consume_ppns), |
| GFP_KERNEL); |
| if (!consume_ppns) { |
| kfree(produce_ppns); |
| return VMCI_ERROR_NO_MEM; |
| } |
| |
| for (i = 0; i < num_produce_pages; i++) |
| produce_ppns[i] = |
| produce_q->kernel_if->u.g.pas[i] >> PAGE_SHIFT; |
| |
| for (i = 0; i < num_consume_pages; i++) |
| consume_ppns[i] = |
| consume_q->kernel_if->u.g.pas[i] >> PAGE_SHIFT; |
| |
| ppn_set->num_produce_pages = num_produce_pages; |
| ppn_set->num_consume_pages = num_consume_pages; |
| ppn_set->produce_ppns = produce_ppns; |
| ppn_set->consume_ppns = consume_ppns; |
| ppn_set->initialized = true; |
| return VMCI_SUCCESS; |
| } |
| |
| /* |
| * Frees the two list of PPNs for a queue pair. |
| */ |
| static void qp_free_ppn_set(struct ppn_set *ppn_set) |
| { |
| if (ppn_set->initialized) { |
| /* Do not call these functions on NULL inputs. */ |
| kfree(ppn_set->produce_ppns); |
| kfree(ppn_set->consume_ppns); |
| } |
| memset(ppn_set, 0, sizeof(*ppn_set)); |
| } |
| |
| /* |
| * Populates the list of PPNs in the hypercall structure with the PPNS |
| * of the produce queue and the consume queue. |
| */ |
| static int qp_populate_ppn_set(u8 *call_buf, const struct ppn_set *ppn_set) |
| { |
| if (vmci_use_ppn64()) { |
| memcpy(call_buf, ppn_set->produce_ppns, |
| ppn_set->num_produce_pages * |
| sizeof(*ppn_set->produce_ppns)); |
| memcpy(call_buf + |
| ppn_set->num_produce_pages * |
| sizeof(*ppn_set->produce_ppns), |
| ppn_set->consume_ppns, |
| ppn_set->num_consume_pages * |
| sizeof(*ppn_set->consume_ppns)); |
| } else { |
| int i; |
| u32 *ppns = (u32 *) call_buf; |
| |
| for (i = 0; i < ppn_set->num_produce_pages; i++) |
| ppns[i] = (u32) ppn_set->produce_ppns[i]; |
| |
| ppns = &ppns[ppn_set->num_produce_pages]; |
| |
| for (i = 0; i < ppn_set->num_consume_pages; i++) |
| ppns[i] = (u32) ppn_set->consume_ppns[i]; |
| } |
| |
| return VMCI_SUCCESS; |
| } |
| |
| /* |
| * Allocates kernel VA space of specified size plus space for the queue |
| * and kernel interface. This is different from the guest queue allocator, |
| * because we do not allocate our own queue header/data pages here but |
| * share those of the guest. |
| */ |
| static struct vmci_queue *qp_host_alloc_queue(u64 size) |
| { |
| struct vmci_queue *queue; |
| size_t queue_page_size; |
| u64 num_pages; |
| const size_t queue_size = sizeof(*queue) + sizeof(*(queue->kernel_if)); |
| |
| if (size > min_t(size_t, VMCI_MAX_GUEST_QP_MEMORY, SIZE_MAX - PAGE_SIZE)) |
| return NULL; |
| num_pages = DIV_ROUND_UP(size, PAGE_SIZE) + 1; |
| if (num_pages > (SIZE_MAX - queue_size) / |
| sizeof(*queue->kernel_if->u.h.page)) |
| return NULL; |
| |
| queue_page_size = num_pages * sizeof(*queue->kernel_if->u.h.page); |
| |
| if (queue_size + queue_page_size > KMALLOC_MAX_SIZE) |
| return NULL; |
| |
| queue = kzalloc(queue_size + queue_page_size, GFP_KERNEL); |
| if (queue) { |
| queue->q_header = NULL; |
| queue->saved_header = NULL; |
| queue->kernel_if = (struct vmci_queue_kern_if *)(queue + 1); |
| queue->kernel_if->host = true; |
| queue->kernel_if->mutex = NULL; |
| queue->kernel_if->num_pages = num_pages; |
| queue->kernel_if->u.h.header_page = |
| (struct page **)((u8 *)queue + queue_size); |
| queue->kernel_if->u.h.page = |
| &queue->kernel_if->u.h.header_page[1]; |
| } |
| |
| return queue; |
| } |
| |
| /* |
| * Frees kernel memory for a given queue (header plus translation |
| * structure). |
| */ |
| static void qp_host_free_queue(struct vmci_queue *queue, u64 queue_size) |
| { |
| kfree(queue); |
| } |
| |
| /* |
| * Initialize the mutex for the pair of queues. This mutex is used to |
| * protect the q_header and the buffer from changing out from under any |
| * users of either queue. Of course, it's only any good if the mutexes |
| * are actually acquired. Queue structure must lie on non-paged memory |
| * or we cannot guarantee access to the mutex. |
| */ |
| static void qp_init_queue_mutex(struct vmci_queue *produce_q, |
| struct vmci_queue *consume_q) |
| { |
| /* |
| * Only the host queue has shared state - the guest queues do not |
| * need to synchronize access using a queue mutex. |
| */ |
| |
| if (produce_q->kernel_if->host) { |
| produce_q->kernel_if->mutex = &produce_q->kernel_if->__mutex; |
| consume_q->kernel_if->mutex = &produce_q->kernel_if->__mutex; |
| mutex_init(produce_q->kernel_if->mutex); |
| } |
| } |
| |
| /* |
| * Cleans up the mutex for the pair of queues. |
| */ |
| static void qp_cleanup_queue_mutex(struct vmci_queue *produce_q, |
| struct vmci_queue *consume_q) |
| { |
| if (produce_q->kernel_if->host) { |
| produce_q->kernel_if->mutex = NULL; |
| consume_q->kernel_if->mutex = NULL; |
| } |
| } |
| |
| /* |
| * Acquire the mutex for the queue. Note that the produce_q and |
| * the consume_q share a mutex. So, only one of the two need to |
| * be passed in to this routine. Either will work just fine. |
| */ |
| static void qp_acquire_queue_mutex(struct vmci_queue *queue) |
| { |
| if (queue->kernel_if->host) |
| mutex_lock(queue->kernel_if->mutex); |
| } |
| |
| /* |
| * Release the mutex for the queue. Note that the produce_q and |
| * the consume_q share a mutex. So, only one of the two need to |
| * be passed in to this routine. Either will work just fine. |
| */ |
| static void qp_release_queue_mutex(struct vmci_queue *queue) |
| { |
| if (queue->kernel_if->host) |
| mutex_unlock(queue->kernel_if->mutex); |
| } |
| |
| /* |
| * Helper function to release pages in the PageStoreAttachInfo |
| * previously obtained using get_user_pages. |
| */ |
| static void qp_release_pages(struct page **pages, |
| u64 num_pages, bool dirty) |
| { |
| int i; |
| |
| for (i = 0; i < num_pages; i++) { |
| if (dirty) |
| set_page_dirty_lock(pages[i]); |
| |
| put_page(pages[i]); |
| pages[i] = NULL; |
| } |
| } |
| |
| /* |
| * Lock the user pages referenced by the {produce,consume}Buffer |
| * struct into memory and populate the {produce,consume}Pages |
| * arrays in the attach structure with them. |
| */ |
| static int qp_host_get_user_memory(u64 produce_uva, |
| u64 consume_uva, |
| struct vmci_queue *produce_q, |
| struct vmci_queue *consume_q) |
| { |
| int retval; |
| int err = VMCI_SUCCESS; |
| |
| retval = get_user_pages_fast((uintptr_t) produce_uva, |
| produce_q->kernel_if->num_pages, |
| FOLL_WRITE, |
| produce_q->kernel_if->u.h.header_page); |
| if (retval < (int)produce_q->kernel_if->num_pages) { |
| pr_debug("get_user_pages_fast(produce) failed (retval=%d)", |
| retval); |
| if (retval > 0) |
| qp_release_pages(produce_q->kernel_if->u.h.header_page, |
| retval, false); |
| err = VMCI_ERROR_NO_MEM; |
| goto out; |
| } |
| |
| retval = get_user_pages_fast((uintptr_t) consume_uva, |
| consume_q->kernel_if->num_pages, |
| FOLL_WRITE, |
| consume_q->kernel_if->u.h.header_page); |
| if (retval < (int)consume_q->kernel_if->num_pages) { |
| pr_debug("get_user_pages_fast(consume) failed (retval=%d)", |
| retval); |
| if (retval > 0) |
| qp_release_pages(consume_q->kernel_if->u.h.header_page, |
| retval, false); |
| qp_release_pages(produce_q->kernel_if->u.h.header_page, |
| produce_q->kernel_if->num_pages, false); |
| err = VMCI_ERROR_NO_MEM; |
| } |
| |
| out: |
| return err; |
| } |
| |
| /* |
| * Registers the specification of the user pages used for backing a queue |
| * pair. Enough information to map in pages is stored in the OS specific |
| * part of the struct vmci_queue structure. |
| */ |
| static int qp_host_register_user_memory(struct vmci_qp_page_store *page_store, |
| struct vmci_queue *produce_q, |
| struct vmci_queue *consume_q) |
| { |
| u64 produce_uva; |
| u64 consume_uva; |
| |
| /* |
| * The new style and the old style mapping only differs in |
| * that we either get a single or two UVAs, so we split the |
| * single UVA range at the appropriate spot. |
| */ |
| produce_uva = page_store->pages; |
| consume_uva = page_store->pages + |
| produce_q->kernel_if->num_pages * PAGE_SIZE; |
| return qp_host_get_user_memory(produce_uva, consume_uva, produce_q, |
| consume_q); |
| } |
| |
| /* |
| * Releases and removes the references to user pages stored in the attach |
| * struct. Pages are released from the page cache and may become |
| * swappable again. |
| */ |
| static void qp_host_unregister_user_memory(struct vmci_queue *produce_q, |
| struct vmci_queue *consume_q) |
| { |
| qp_release_pages(produce_q->kernel_if->u.h.header_page, |
| produce_q->kernel_if->num_pages, true); |
| memset(produce_q->kernel_if->u.h.header_page, 0, |
| sizeof(*produce_q->kernel_if->u.h.header_page) * |
| produce_q->kernel_if->num_pages); |
| qp_release_pages(consume_q->kernel_if->u.h.header_page, |
| consume_q->kernel_if->num_pages, true); |
| memset(consume_q->kernel_if->u.h.header_page, 0, |
| sizeof(*consume_q->kernel_if->u.h.header_page) * |
| consume_q->kernel_if->num_pages); |
| } |
| |
| /* |
| * Once qp_host_register_user_memory has been performed on a |
| * queue, the queue pair headers can be mapped into the |
| * kernel. Once mapped, they must be unmapped with |
| * qp_host_unmap_queues prior to calling |
| * qp_host_unregister_user_memory. |
| * Pages are pinned. |
| */ |
| static int qp_host_map_queues(struct vmci_queue *produce_q, |
| struct vmci_queue *consume_q) |
| { |
| int result; |
| |
| if (!produce_q->q_header || !consume_q->q_header) { |
| struct page *headers[2]; |
| |
| if (produce_q->q_header != consume_q->q_header) |
| return VMCI_ERROR_QUEUEPAIR_MISMATCH; |
| |
| if (produce_q->kernel_if->u.h.header_page == NULL || |
| *produce_q->kernel_if->u.h.header_page == NULL) |
| return VMCI_ERROR_UNAVAILABLE; |
| |
| headers[0] = *produce_q->kernel_if->u.h.header_page; |
| headers[1] = *consume_q->kernel_if->u.h.header_page; |
| |
| produce_q->q_header = vmap(headers, 2, VM_MAP, PAGE_KERNEL); |
| if (produce_q->q_header != NULL) { |
| consume_q->q_header = |
| (struct vmci_queue_header *)((u8 *) |
| produce_q->q_header + |
| PAGE_SIZE); |
| result = VMCI_SUCCESS; |
| } else { |
| pr_warn("vmap failed\n"); |
| result = VMCI_ERROR_NO_MEM; |
| } |
| } else { |
| result = VMCI_SUCCESS; |
| } |
| |
| return result; |
| } |
| |
| /* |
| * Unmaps previously mapped queue pair headers from the kernel. |
| * Pages are unpinned. |
| */ |
| static int qp_host_unmap_queues(u32 gid, |
| struct vmci_queue *produce_q, |
| struct vmci_queue *consume_q) |
| { |
| if (produce_q->q_header) { |
| if (produce_q->q_header < consume_q->q_header) |
| vunmap(produce_q->q_header); |
| else |
| vunmap(consume_q->q_header); |
| |
| produce_q->q_header = NULL; |
| consume_q->q_header = NULL; |
| } |
| |
| return VMCI_SUCCESS; |
| } |
| |
| /* |
| * Finds the entry in the list corresponding to a given handle. Assumes |
| * that the list is locked. |
| */ |
| static struct qp_entry *qp_list_find(struct qp_list *qp_list, |
| struct vmci_handle handle) |
| { |
| struct qp_entry *entry; |
| |
| if (vmci_handle_is_invalid(handle)) |
| return NULL; |
| |
| list_for_each_entry(entry, &qp_list->head, list_item) { |
| if (vmci_handle_is_equal(entry->handle, handle)) |
| return entry; |
| } |
| |
| return NULL; |
| } |
| |
| /* |
| * Finds the entry in the list corresponding to a given handle. |
| */ |
| static struct qp_guest_endpoint * |
| qp_guest_handle_to_entry(struct vmci_handle handle) |
| { |
| struct qp_guest_endpoint *entry; |
| struct qp_entry *qp = qp_list_find(&qp_guest_endpoints, handle); |
| |
| entry = qp ? container_of( |
| qp, struct qp_guest_endpoint, qp) : NULL; |
| return entry; |
| } |
| |
| /* |
| * Finds the entry in the list corresponding to a given handle. |
| */ |
| static struct qp_broker_entry * |
| qp_broker_handle_to_entry(struct vmci_handle handle) |
| { |
| struct qp_broker_entry *entry; |
| struct qp_entry *qp = qp_list_find(&qp_broker_list, handle); |
| |
| entry = qp ? container_of( |
| qp, struct qp_broker_entry, qp) : NULL; |
| return entry; |
| } |
| |
| /* |
| * Dispatches a queue pair event message directly into the local event |
| * queue. |
| */ |
| static int qp_notify_peer_local(bool attach, struct vmci_handle handle) |
| { |
| u32 context_id = vmci_get_context_id(); |
| struct vmci_event_qp ev; |
| |
| ev.msg.hdr.dst = vmci_make_handle(context_id, VMCI_EVENT_HANDLER); |
| ev.msg.hdr.src = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, |
| VMCI_CONTEXT_RESOURCE_ID); |
| ev.msg.hdr.payload_size = sizeof(ev) - sizeof(ev.msg.hdr); |
| ev.msg.event_data.event = |
| attach ? VMCI_EVENT_QP_PEER_ATTACH : VMCI_EVENT_QP_PEER_DETACH; |
| ev.payload.peer_id = context_id; |
| ev.payload.handle = handle; |
| |
| return vmci_event_dispatch(&ev.msg.hdr); |
| } |
| |
| /* |
| * Allocates and initializes a qp_guest_endpoint structure. |
| * Allocates a queue_pair rid (and handle) iff the given entry has |
| * an invalid handle. 0 through VMCI_RESERVED_RESOURCE_ID_MAX |
| * are reserved handles. Assumes that the QP list mutex is held |
| * by the caller. |
| */ |
| static struct qp_guest_endpoint * |
| qp_guest_endpoint_create(struct vmci_handle handle, |
| u32 peer, |
| u32 flags, |
| u64 produce_size, |
| u64 consume_size, |
| void *produce_q, |
| void *consume_q) |
| { |
| int result; |
| struct qp_guest_endpoint *entry; |
| /* One page each for the queue headers. */ |
| const u64 num_ppns = DIV_ROUND_UP(produce_size, PAGE_SIZE) + |
| DIV_ROUND_UP(consume_size, PAGE_SIZE) + 2; |
| |
| if (vmci_handle_is_invalid(handle)) { |
| u32 context_id = vmci_get_context_id(); |
| |
| handle = vmci_make_handle(context_id, VMCI_INVALID_ID); |
| } |
| |
| entry = kzalloc(sizeof(*entry), GFP_KERNEL); |
| if (entry) { |
| entry->qp.peer = peer; |
| entry->qp.flags = flags; |
| entry->qp.produce_size = produce_size; |
| entry->qp.consume_size = consume_size; |
| entry->qp.ref_count = 0; |
| entry->num_ppns = num_ppns; |
| entry->produce_q = produce_q; |
| entry->consume_q = consume_q; |
| INIT_LIST_HEAD(&entry->qp.list_item); |
| |
| /* Add resource obj */ |
| result = vmci_resource_add(&entry->resource, |
| VMCI_RESOURCE_TYPE_QPAIR_GUEST, |
| handle); |
| entry->qp.handle = vmci_resource_handle(&entry->resource); |
| if ((result != VMCI_SUCCESS) || |
| qp_list_find(&qp_guest_endpoints, entry->qp.handle)) { |
| pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d", |
| handle.context, handle.resource, result); |
| kfree(entry); |
| entry = NULL; |
| } |
| } |
| return entry; |
| } |
| |
| /* |
| * Frees a qp_guest_endpoint structure. |
| */ |
| static void qp_guest_endpoint_destroy(struct qp_guest_endpoint *entry) |
| { |
| qp_free_ppn_set(&entry->ppn_set); |
| qp_cleanup_queue_mutex(entry->produce_q, entry->consume_q); |
| qp_free_queue(entry->produce_q, entry->qp.produce_size); |
| qp_free_queue(entry->consume_q, entry->qp.consume_size); |
| /* Unlink from resource hash table and free callback */ |
| vmci_resource_remove(&entry->resource); |
| |
| kfree(entry); |
| } |
| |
| /* |
| * Helper to make a queue_pairAlloc hypercall when the driver is |
| * supporting a guest device. |
| */ |
| static int qp_alloc_hypercall(const struct qp_guest_endpoint *entry) |
| { |
| struct vmci_qp_alloc_msg *alloc_msg; |
| size_t msg_size; |
| size_t ppn_size; |
| int result; |
| |
| if (!entry || entry->num_ppns <= 2) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| ppn_size = vmci_use_ppn64() ? sizeof(u64) : sizeof(u32); |
| msg_size = sizeof(*alloc_msg) + |
| (size_t) entry->num_ppns * ppn_size; |
| alloc_msg = kmalloc(msg_size, GFP_KERNEL); |
| if (!alloc_msg) |
| return VMCI_ERROR_NO_MEM; |
| |
| alloc_msg->hdr.dst = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, |
| VMCI_QUEUEPAIR_ALLOC); |
| alloc_msg->hdr.src = VMCI_ANON_SRC_HANDLE; |
| alloc_msg->hdr.payload_size = msg_size - VMCI_DG_HEADERSIZE; |
| alloc_msg->handle = entry->qp.handle; |
| alloc_msg->peer = entry->qp.peer; |
| alloc_msg->flags = entry->qp.flags; |
| alloc_msg->produce_size = entry->qp.produce_size; |
| alloc_msg->consume_size = entry->qp.consume_size; |
| alloc_msg->num_ppns = entry->num_ppns; |
| |
| result = qp_populate_ppn_set((u8 *)alloc_msg + sizeof(*alloc_msg), |
| &entry->ppn_set); |
| if (result == VMCI_SUCCESS) |
| result = vmci_send_datagram(&alloc_msg->hdr); |
| |
| kfree(alloc_msg); |
| |
| return result; |
| } |
| |
| /* |
| * Helper to make a queue_pairDetach hypercall when the driver is |
| * supporting a guest device. |
| */ |
| static int qp_detatch_hypercall(struct vmci_handle handle) |
| { |
| struct vmci_qp_detach_msg detach_msg; |
| |
| detach_msg.hdr.dst = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, |
| VMCI_QUEUEPAIR_DETACH); |
| detach_msg.hdr.src = VMCI_ANON_SRC_HANDLE; |
| detach_msg.hdr.payload_size = sizeof(handle); |
| detach_msg.handle = handle; |
| |
| return vmci_send_datagram(&detach_msg.hdr); |
| } |
| |
| /* |
| * Adds the given entry to the list. Assumes that the list is locked. |
| */ |
| static void qp_list_add_entry(struct qp_list *qp_list, struct qp_entry *entry) |
| { |
| if (entry) |
| list_add(&entry->list_item, &qp_list->head); |
| } |
| |
| /* |
| * Removes the given entry from the list. Assumes that the list is locked. |
| */ |
| static void qp_list_remove_entry(struct qp_list *qp_list, |
| struct qp_entry *entry) |
| { |
| if (entry) |
| list_del(&entry->list_item); |
| } |
| |
| /* |
| * Helper for VMCI queue_pair detach interface. Frees the physical |
| * pages for the queue pair. |
| */ |
| static int qp_detatch_guest_work(struct vmci_handle handle) |
| { |
| int result; |
| struct qp_guest_endpoint *entry; |
| u32 ref_count = ~0; /* To avoid compiler warning below */ |
| |
| mutex_lock(&qp_guest_endpoints.mutex); |
| |
| entry = qp_guest_handle_to_entry(handle); |
| if (!entry) { |
| mutex_unlock(&qp_guest_endpoints.mutex); |
| return VMCI_ERROR_NOT_FOUND; |
| } |
| |
| if (entry->qp.flags & VMCI_QPFLAG_LOCAL) { |
| result = VMCI_SUCCESS; |
| |
| if (entry->qp.ref_count > 1) { |
| result = qp_notify_peer_local(false, handle); |
| /* |
| * We can fail to notify a local queuepair |
| * because we can't allocate. We still want |
| * to release the entry if that happens, so |
| * don't bail out yet. |
| */ |
| } |
| } else { |
| result = qp_detatch_hypercall(handle); |
| if (result < VMCI_SUCCESS) { |
| /* |
| * We failed to notify a non-local queuepair. |
| * That other queuepair might still be |
| * accessing the shared memory, so don't |
| * release the entry yet. It will get cleaned |
| * up by VMCIqueue_pair_Exit() if necessary |
| * (assuming we are going away, otherwise why |
| * did this fail?). |
| */ |
| |
| mutex_unlock(&qp_guest_endpoints.mutex); |
| return result; |
| } |
| } |
| |
| /* |
| * If we get here then we either failed to notify a local queuepair, or |
| * we succeeded in all cases. Release the entry if required. |
| */ |
| |
| entry->qp.ref_count--; |
| if (entry->qp.ref_count == 0) |
| qp_list_remove_entry(&qp_guest_endpoints, &entry->qp); |
| |
| /* If we didn't remove the entry, this could change once we unlock. */ |
| if (entry) |
| ref_count = entry->qp.ref_count; |
| |
| mutex_unlock(&qp_guest_endpoints.mutex); |
| |
| if (ref_count == 0) |
| qp_guest_endpoint_destroy(entry); |
| |
| return result; |
| } |
| |
| /* |
| * This functions handles the actual allocation of a VMCI queue |
| * pair guest endpoint. Allocates physical pages for the queue |
| * pair. It makes OS dependent calls through generic wrappers. |
| */ |
| static int qp_alloc_guest_work(struct vmci_handle *handle, |
| struct vmci_queue **produce_q, |
| u64 produce_size, |
| struct vmci_queue **consume_q, |
| u64 consume_size, |
| u32 peer, |
| u32 flags, |
| u32 priv_flags) |
| { |
| const u64 num_produce_pages = |
| DIV_ROUND_UP(produce_size, PAGE_SIZE) + 1; |
| const u64 num_consume_pages = |
| DIV_ROUND_UP(consume_size, PAGE_SIZE) + 1; |
| void *my_produce_q = NULL; |
| void *my_consume_q = NULL; |
| int result; |
| struct qp_guest_endpoint *queue_pair_entry = NULL; |
| |
| if (priv_flags != VMCI_NO_PRIVILEGE_FLAGS) |
| return VMCI_ERROR_NO_ACCESS; |
| |
| mutex_lock(&qp_guest_endpoints.mutex); |
| |
| queue_pair_entry = qp_guest_handle_to_entry(*handle); |
| if (queue_pair_entry) { |
| if (queue_pair_entry->qp.flags & VMCI_QPFLAG_LOCAL) { |
| /* Local attach case. */ |
| if (queue_pair_entry->qp.ref_count > 1) { |
| pr_devel("Error attempting to attach more than once\n"); |
| result = VMCI_ERROR_UNAVAILABLE; |
| goto error_keep_entry; |
| } |
| |
| if (queue_pair_entry->qp.produce_size != consume_size || |
| queue_pair_entry->qp.consume_size != |
| produce_size || |
| queue_pair_entry->qp.flags != |
| (flags & ~VMCI_QPFLAG_ATTACH_ONLY)) { |
| pr_devel("Error mismatched queue pair in local attach\n"); |
| result = VMCI_ERROR_QUEUEPAIR_MISMATCH; |
| goto error_keep_entry; |
| } |
| |
| /* |
| * Do a local attach. We swap the consume and |
| * produce queues for the attacher and deliver |
| * an attach event. |
| */ |
| result = qp_notify_peer_local(true, *handle); |
| if (result < VMCI_SUCCESS) |
| goto error_keep_entry; |
| |
| my_produce_q = queue_pair_entry->consume_q; |
| my_consume_q = queue_pair_entry->produce_q; |
| goto out; |
| } |
| |
| result = VMCI_ERROR_ALREADY_EXISTS; |
| goto error_keep_entry; |
| } |
| |
| my_produce_q = qp_alloc_queue(produce_size, flags); |
| if (!my_produce_q) { |
| pr_warn("Error allocating pages for produce queue\n"); |
| result = VMCI_ERROR_NO_MEM; |
| goto error; |
| } |
| |
| my_consume_q = qp_alloc_queue(consume_size, flags); |
| if (!my_consume_q) { |
| pr_warn("Error allocating pages for consume queue\n"); |
| result = VMCI_ERROR_NO_MEM; |
| goto error; |
| } |
| |
| queue_pair_entry = qp_guest_endpoint_create(*handle, peer, flags, |
| produce_size, consume_size, |
| my_produce_q, my_consume_q); |
| if (!queue_pair_entry) { |
| pr_warn("Error allocating memory in %s\n", __func__); |
| result = VMCI_ERROR_NO_MEM; |
| goto error; |
| } |
| |
| result = qp_alloc_ppn_set(my_produce_q, num_produce_pages, my_consume_q, |
| num_consume_pages, |
| &queue_pair_entry->ppn_set); |
| if (result < VMCI_SUCCESS) { |
| pr_warn("qp_alloc_ppn_set failed\n"); |
| goto error; |
| } |
| |
| /* |
| * It's only necessary to notify the host if this queue pair will be |
| * attached to from another context. |
| */ |
| if (queue_pair_entry->qp.flags & VMCI_QPFLAG_LOCAL) { |
| /* Local create case. */ |
| u32 context_id = vmci_get_context_id(); |
| |
| /* |
| * Enforce similar checks on local queue pairs as we |
| * do for regular ones. The handle's context must |
| * match the creator or attacher context id (here they |
| * are both the current context id) and the |
| * attach-only flag cannot exist during create. We |
| * also ensure specified peer is this context or an |
| * invalid one. |
| */ |
| if (queue_pair_entry->qp.handle.context != context_id || |
| (queue_pair_entry->qp.peer != VMCI_INVALID_ID && |
| queue_pair_entry->qp.peer != context_id)) { |
| result = VMCI_ERROR_NO_ACCESS; |
| goto error; |
| } |
| |
| if (queue_pair_entry->qp.flags & VMCI_QPFLAG_ATTACH_ONLY) { |
| result = VMCI_ERROR_NOT_FOUND; |
| goto error; |
| } |
| } else { |
| result = qp_alloc_hypercall(queue_pair_entry); |
| if (result < VMCI_SUCCESS) { |
| pr_devel("qp_alloc_hypercall result = %d\n", result); |
| goto error; |
| } |
| } |
| |
| qp_init_queue_mutex((struct vmci_queue *)my_produce_q, |
| (struct vmci_queue *)my_consume_q); |
| |
| qp_list_add_entry(&qp_guest_endpoints, &queue_pair_entry->qp); |
| |
| out: |
| queue_pair_entry->qp.ref_count++; |
| *handle = queue_pair_entry->qp.handle; |
| *produce_q = (struct vmci_queue *)my_produce_q; |
| *consume_q = (struct vmci_queue *)my_consume_q; |
| |
| /* |
| * We should initialize the queue pair header pages on a local |
| * queue pair create. For non-local queue pairs, the |
| * hypervisor initializes the header pages in the create step. |
| */ |
| if ((queue_pair_entry->qp.flags & VMCI_QPFLAG_LOCAL) && |
| queue_pair_entry->qp.ref_count == 1) { |
| vmci_q_header_init((*produce_q)->q_header, *handle); |
| vmci_q_header_init((*consume_q)->q_header, *handle); |
| } |
| |
| mutex_unlock(&qp_guest_endpoints.mutex); |
| |
| return VMCI_SUCCESS; |
| |
| error: |
| mutex_unlock(&qp_guest_endpoints.mutex); |
| if (queue_pair_entry) { |
| /* The queues will be freed inside the destroy routine. */ |
| qp_guest_endpoint_destroy(queue_pair_entry); |
| } else { |
| qp_free_queue(my_produce_q, produce_size); |
| qp_free_queue(my_consume_q, consume_size); |
| } |
| return result; |
| |
| error_keep_entry: |
| /* This path should only be used when an existing entry was found. */ |
| mutex_unlock(&qp_guest_endpoints.mutex); |
| return result; |
| } |
| |
| /* |
| * The first endpoint issuing a queue pair allocation will create the state |
| * of the queue pair in the queue pair broker. |
| * |
| * If the creator is a guest, it will associate a VMX virtual address range |
| * with the queue pair as specified by the page_store. For compatibility with |
| * older VMX'en, that would use a separate step to set the VMX virtual |
| * address range, the virtual address range can be registered later using |
| * vmci_qp_broker_set_page_store. In that case, a page_store of NULL should be |
| * used. |
| * |
| * If the creator is the host, a page_store of NULL should be used as well, |
| * since the host is not able to supply a page store for the queue pair. |
| * |
| * For older VMX and host callers, the queue pair will be created in the |
| * VMCIQPB_CREATED_NO_MEM state, and for current VMX callers, it will be |
| * created in VMCOQPB_CREATED_MEM state. |
| */ |
| static int qp_broker_create(struct vmci_handle handle, |
| u32 peer, |
| u32 flags, |
| u32 priv_flags, |
| u64 produce_size, |
| u64 consume_size, |
| struct vmci_qp_page_store *page_store, |
| struct vmci_ctx *context, |
| vmci_event_release_cb wakeup_cb, |
| void *client_data, struct qp_broker_entry **ent) |
| { |
| struct qp_broker_entry *entry = NULL; |
| const u32 context_id = vmci_ctx_get_id(context); |
| bool is_local = flags & VMCI_QPFLAG_LOCAL; |
| int result; |
| u64 guest_produce_size; |
| u64 guest_consume_size; |
| |
| /* Do not create if the caller asked not to. */ |
| if (flags & VMCI_QPFLAG_ATTACH_ONLY) |
| return VMCI_ERROR_NOT_FOUND; |
| |
| /* |
| * Creator's context ID should match handle's context ID or the creator |
| * must allow the context in handle's context ID as the "peer". |
| */ |
| if (handle.context != context_id && handle.context != peer) |
| return VMCI_ERROR_NO_ACCESS; |
| |
| if (VMCI_CONTEXT_IS_VM(context_id) && VMCI_CONTEXT_IS_VM(peer)) |
| return VMCI_ERROR_DST_UNREACHABLE; |
| |
| /* |
| * Creator's context ID for local queue pairs should match the |
| * peer, if a peer is specified. |
| */ |
| if (is_local && peer != VMCI_INVALID_ID && context_id != peer) |
| return VMCI_ERROR_NO_ACCESS; |
| |
| entry = kzalloc(sizeof(*entry), GFP_ATOMIC); |
| if (!entry) |
| return VMCI_ERROR_NO_MEM; |
| |
| if (vmci_ctx_get_id(context) == VMCI_HOST_CONTEXT_ID && !is_local) { |
| /* |
| * The queue pair broker entry stores values from the guest |
| * point of view, so a creating host side endpoint should swap |
| * produce and consume values -- unless it is a local queue |
| * pair, in which case no swapping is necessary, since the local |
| * attacher will swap queues. |
| */ |
| |
| guest_produce_size = consume_size; |
| guest_consume_size = produce_size; |
| } else { |
| guest_produce_size = produce_size; |
| guest_consume_size = consume_size; |
| } |
| |
| entry->qp.handle = handle; |
| entry->qp.peer = peer; |
| entry->qp.flags = flags; |
| entry->qp.produce_size = guest_produce_size; |
| entry->qp.consume_size = guest_consume_size; |
| entry->qp.ref_count = 1; |
| entry->create_id = context_id; |
| entry->attach_id = VMCI_INVALID_ID; |
| entry->state = VMCIQPB_NEW; |
| entry->require_trusted_attach = |
| !!(context->priv_flags & VMCI_PRIVILEGE_FLAG_RESTRICTED); |
| entry->created_by_trusted = |
| !!(priv_flags & VMCI_PRIVILEGE_FLAG_TRUSTED); |
| entry->vmci_page_files = false; |
| entry->wakeup_cb = wakeup_cb; |
| entry->client_data = client_data; |
| entry->produce_q = qp_host_alloc_queue(guest_produce_size); |
| if (entry->produce_q == NULL) { |
| result = VMCI_ERROR_NO_MEM; |
| goto error; |
| } |
| entry->consume_q = qp_host_alloc_queue(guest_consume_size); |
| if (entry->consume_q == NULL) { |
| result = VMCI_ERROR_NO_MEM; |
| goto error; |
| } |
| |
| qp_init_queue_mutex(entry->produce_q, entry->consume_q); |
| |
| INIT_LIST_HEAD(&entry->qp.list_item); |
| |
| if (is_local) { |
| u8 *tmp; |
| |
| entry->local_mem = kcalloc(QPE_NUM_PAGES(entry->qp), |
| PAGE_SIZE, GFP_KERNEL); |
| if (entry->local_mem == NULL) { |
| result = VMCI_ERROR_NO_MEM; |
| goto error; |
| } |
| entry->state = VMCIQPB_CREATED_MEM; |
| entry->produce_q->q_header = entry->local_mem; |
| tmp = (u8 *)entry->local_mem + PAGE_SIZE * |
| (DIV_ROUND_UP(entry->qp.produce_size, PAGE_SIZE) + 1); |
| entry->consume_q->q_header = (struct vmci_queue_header *)tmp; |
| } else if (page_store) { |
| /* |
| * The VMX already initialized the queue pair headers, so no |
| * need for the kernel side to do that. |
| */ |
| result = qp_host_register_user_memory(page_store, |
| entry->produce_q, |
| entry->consume_q); |
| if (result < VMCI_SUCCESS) |
| goto error; |
| |
| entry->state = VMCIQPB_CREATED_MEM; |
| } else { |
| /* |
| * A create without a page_store may be either a host |
| * side create (in which case we are waiting for the |
| * guest side to supply the memory) or an old style |
| * queue pair create (in which case we will expect a |
| * set page store call as the next step). |
| */ |
| entry->state = VMCIQPB_CREATED_NO_MEM; |
| } |
| |
| qp_list_add_entry(&qp_broker_list, &entry->qp); |
| if (ent != NULL) |
| *ent = entry; |
| |
| /* Add to resource obj */ |
| result = vmci_resource_add(&entry->resource, |
| VMCI_RESOURCE_TYPE_QPAIR_HOST, |
| handle); |
| if (result != VMCI_SUCCESS) { |
| pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d", |
| handle.context, handle.resource, result); |
| goto error; |
| } |
| |
| entry->qp.handle = vmci_resource_handle(&entry->resource); |
| if (is_local) { |
| vmci_q_header_init(entry->produce_q->q_header, |
| entry->qp.handle); |
| vmci_q_header_init(entry->consume_q->q_header, |
| entry->qp.handle); |
| } |
| |
| vmci_ctx_qp_create(context, entry->qp.handle); |
| |
| return VMCI_SUCCESS; |
| |
| error: |
| if (entry != NULL) { |
| qp_host_free_queue(entry->produce_q, guest_produce_size); |
| qp_host_free_queue(entry->consume_q, guest_consume_size); |
| kfree(entry); |
| } |
| |
| return result; |
| } |
| |
| /* |
| * Enqueues an event datagram to notify the peer VM attached to |
| * the given queue pair handle about attach/detach event by the |
| * given VM. Returns Payload size of datagram enqueued on |
| * success, error code otherwise. |
| */ |
| static int qp_notify_peer(bool attach, |
| struct vmci_handle handle, |
| u32 my_id, |
| u32 peer_id) |
| { |
| int rv; |
| struct vmci_event_qp ev; |
| |
| if (vmci_handle_is_invalid(handle) || my_id == VMCI_INVALID_ID || |
| peer_id == VMCI_INVALID_ID) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| /* |
| * In vmci_ctx_enqueue_datagram() we enforce the upper limit on |
| * number of pending events from the hypervisor to a given VM |
| * otherwise a rogue VM could do an arbitrary number of attach |
| * and detach operations causing memory pressure in the host |
| * kernel. |
| */ |
| |
| ev.msg.hdr.dst = vmci_make_handle(peer_id, VMCI_EVENT_HANDLER); |
| ev.msg.hdr.src = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, |
| VMCI_CONTEXT_RESOURCE_ID); |
| ev.msg.hdr.payload_size = sizeof(ev) - sizeof(ev.msg.hdr); |
| ev.msg.event_data.event = attach ? |
| VMCI_EVENT_QP_PEER_ATTACH : VMCI_EVENT_QP_PEER_DETACH; |
| ev.payload.handle = handle; |
| ev.payload.peer_id = my_id; |
| |
| rv = vmci_datagram_dispatch(VMCI_HYPERVISOR_CONTEXT_ID, |
| &ev.msg.hdr, false); |
| if (rv < VMCI_SUCCESS) |
| pr_warn("Failed to enqueue queue_pair %s event datagram for context (ID=0x%x)\n", |
| attach ? "ATTACH" : "DETACH", peer_id); |
| |
| return rv; |
| } |
| |
| /* |
| * The second endpoint issuing a queue pair allocation will attach to |
| * the queue pair registered with the queue pair broker. |
| * |
| * If the attacher is a guest, it will associate a VMX virtual address |
| * range with the queue pair as specified by the page_store. At this |
| * point, the already attach host endpoint may start using the queue |
| * pair, and an attach event is sent to it. For compatibility with |
| * older VMX'en, that used a separate step to set the VMX virtual |
| * address range, the virtual address range can be registered later |
| * using vmci_qp_broker_set_page_store. In that case, a page_store of |
| * NULL should be used, and the attach event will be generated once |
| * the actual page store has been set. |
| * |
| * If the attacher is the host, a page_store of NULL should be used as |
| * well, since the page store information is already set by the guest. |
| * |
| * For new VMX and host callers, the queue pair will be moved to the |
| * VMCIQPB_ATTACHED_MEM state, and for older VMX callers, it will be |
| * moved to the VMCOQPB_ATTACHED_NO_MEM state. |
| */ |
| static int qp_broker_attach(struct qp_broker_entry *entry, |
| u32 peer, |
| u32 flags, |
| u32 priv_flags, |
| u64 produce_size, |
| u64 consume_size, |
| struct vmci_qp_page_store *page_store, |
| struct vmci_ctx *context, |
| vmci_event_release_cb wakeup_cb, |
| void *client_data, |
| struct qp_broker_entry **ent) |
| { |
| const u32 context_id = vmci_ctx_get_id(context); |
| bool is_local = flags & VMCI_QPFLAG_LOCAL; |
| int result; |
| |
| if (entry->state != VMCIQPB_CREATED_NO_MEM && |
| entry->state != VMCIQPB_CREATED_MEM) |
| return VMCI_ERROR_UNAVAILABLE; |
| |
| if (is_local) { |
| if (!(entry->qp.flags & VMCI_QPFLAG_LOCAL) || |
| context_id != entry->create_id) { |
| return VMCI_ERROR_INVALID_ARGS; |
| } |
| } else if (context_id == entry->create_id || |
| context_id == entry->attach_id) { |
| return VMCI_ERROR_ALREADY_EXISTS; |
| } |
| |
| if (VMCI_CONTEXT_IS_VM(context_id) && |
| VMCI_CONTEXT_IS_VM(entry->create_id)) |
| return VMCI_ERROR_DST_UNREACHABLE; |
| |
| /* |
| * If we are attaching from a restricted context then the queuepair |
| * must have been created by a trusted endpoint. |
| */ |
| if ((context->priv_flags & VMCI_PRIVILEGE_FLAG_RESTRICTED) && |
| !entry->created_by_trusted) |
| return VMCI_ERROR_NO_ACCESS; |
| |
| /* |
| * If we are attaching to a queuepair that was created by a restricted |
| * context then we must be trusted. |
| */ |
| if (entry->require_trusted_attach && |
| (!(priv_flags & VMCI_PRIVILEGE_FLAG_TRUSTED))) |
| return VMCI_ERROR_NO_ACCESS; |
| |
| /* |
| * If the creator specifies VMCI_INVALID_ID in "peer" field, access |
| * control check is not performed. |
| */ |
| if (entry->qp.peer != VMCI_INVALID_ID && entry->qp.peer != context_id) |
| return VMCI_ERROR_NO_ACCESS; |
| |
| if (entry->create_id == VMCI_HOST_CONTEXT_ID) { |
| /* |
| * Do not attach if the caller doesn't support Host Queue Pairs |
| * and a host created this queue pair. |
| */ |
| |
| if (!vmci_ctx_supports_host_qp(context)) |
| return VMCI_ERROR_INVALID_RESOURCE; |
| |
| } else if (context_id == VMCI_HOST_CONTEXT_ID) { |
| struct vmci_ctx *create_context; |
| bool supports_host_qp; |
| |
| /* |
| * Do not attach a host to a user created queue pair if that |
| * user doesn't support host queue pair end points. |
| */ |
| |
| create_context = vmci_ctx_get(entry->create_id); |
| supports_host_qp = vmci_ctx_supports_host_qp(create_context); |
| vmci_ctx_put(create_context); |
| |
| if (!supports_host_qp) |
| return VMCI_ERROR_INVALID_RESOURCE; |
| } |
| |
| if ((entry->qp.flags & ~VMCI_QP_ASYMM) != (flags & ~VMCI_QP_ASYMM_PEER)) |
| return VMCI_ERROR_QUEUEPAIR_MISMATCH; |
| |
| if (context_id != VMCI_HOST_CONTEXT_ID) { |
| /* |
| * The queue pair broker entry stores values from the guest |
| * point of view, so an attaching guest should match the values |
| * stored in the entry. |
| */ |
| |
| if (entry->qp.produce_size != produce_size || |
| entry->qp.consume_size != consume_size) { |
| return VMCI_ERROR_QUEUEPAIR_MISMATCH; |
| } |
| } else if (entry->qp.produce_size != consume_size || |
| entry->qp.consume_size != produce_size) { |
| return VMCI_ERROR_QUEUEPAIR_MISMATCH; |
| } |
| |
| if (context_id != VMCI_HOST_CONTEXT_ID) { |
| /* |
| * If a guest attached to a queue pair, it will supply |
| * the backing memory. If this is a pre NOVMVM vmx, |
| * the backing memory will be supplied by calling |
| * vmci_qp_broker_set_page_store() following the |
| * return of the vmci_qp_broker_alloc() call. If it is |
| * a vmx of version NOVMVM or later, the page store |
| * must be supplied as part of the |
| * vmci_qp_broker_alloc call. Under all circumstances |
| * must the initially created queue pair not have any |
| * memory associated with it already. |
| */ |
| |
| if (entry->state != VMCIQPB_CREATED_NO_MEM) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| if (page_store != NULL) { |
| /* |
| * Patch up host state to point to guest |
| * supplied memory. The VMX already |
| * initialized the queue pair headers, so no |
| * need for the kernel side to do that. |
| */ |
| |
| result = qp_host_register_user_memory(page_store, |
| entry->produce_q, |
| entry->consume_q); |
| if (result < VMCI_SUCCESS) |
| return result; |
| |
| entry->state = VMCIQPB_ATTACHED_MEM; |
| } else { |
| entry->state = VMCIQPB_ATTACHED_NO_MEM; |
| } |
| } else if (entry->state == VMCIQPB_CREATED_NO_MEM) { |
| /* |
| * The host side is attempting to attach to a queue |
| * pair that doesn't have any memory associated with |
| * it. This must be a pre NOVMVM vmx that hasn't set |
| * the page store information yet, or a quiesced VM. |
| */ |
| |
| return VMCI_ERROR_UNAVAILABLE; |
| } else { |
| /* The host side has successfully attached to a queue pair. */ |
| entry->state = VMCIQPB_ATTACHED_MEM; |
| } |
| |
| if (entry->state == VMCIQPB_ATTACHED_MEM) { |
| result = |
| qp_notify_peer(true, entry->qp.handle, context_id, |
| entry->create_id); |
| if (result < VMCI_SUCCESS) |
| pr_warn("Failed to notify peer (ID=0x%x) of attach to queue pair (handle=0x%x:0x%x)\n", |
| entry->create_id, entry->qp.handle.context, |
| entry->qp.handle.resource); |
| } |
| |
| entry->attach_id = context_id; |
| entry->qp.ref_count++; |
| if (wakeup_cb) { |
| entry->wakeup_cb = wakeup_cb; |
| entry->client_data = client_data; |
| } |
| |
| /* |
| * When attaching to local queue pairs, the context already has |
| * an entry tracking the queue pair, so don't add another one. |
| */ |
| if (!is_local) |
| vmci_ctx_qp_create(context, entry->qp.handle); |
| |
| if (ent != NULL) |
| *ent = entry; |
| |
| return VMCI_SUCCESS; |
| } |
| |
| /* |
| * queue_pair_Alloc for use when setting up queue pair endpoints |
| * on the host. |
| */ |
| static int qp_broker_alloc(struct vmci_handle handle, |
| u32 peer, |
| u32 flags, |
| u32 priv_flags, |
| u64 produce_size, |
| u64 consume_size, |
| struct vmci_qp_page_store *page_store, |
| struct vmci_ctx *context, |
| vmci_event_release_cb wakeup_cb, |
| void *client_data, |
| struct qp_broker_entry **ent, |
| bool *swap) |
| { |
| const u32 context_id = vmci_ctx_get_id(context); |
| bool create; |
| struct qp_broker_entry *entry = NULL; |
| bool is_local = flags & VMCI_QPFLAG_LOCAL; |
| int result; |
| |
| if (vmci_handle_is_invalid(handle) || |
| (flags & ~VMCI_QP_ALL_FLAGS) || is_local || |
| !(produce_size || consume_size) || |
| !context || context_id == VMCI_INVALID_ID || |
| handle.context == VMCI_INVALID_ID) { |
| return VMCI_ERROR_INVALID_ARGS; |
| } |
| |
| if (page_store && !VMCI_QP_PAGESTORE_IS_WELLFORMED(page_store)) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| /* |
| * In the initial argument check, we ensure that non-vmkernel hosts |
| * are not allowed to create local queue pairs. |
| */ |
| |
| mutex_lock(&qp_broker_list.mutex); |
| |
| if (!is_local && vmci_ctx_qp_exists(context, handle)) { |
| pr_devel("Context (ID=0x%x) already attached to queue pair (handle=0x%x:0x%x)\n", |
| context_id, handle.context, handle.resource); |
| mutex_unlock(&qp_broker_list.mutex); |
| return VMCI_ERROR_ALREADY_EXISTS; |
| } |
| |
| if (handle.resource != VMCI_INVALID_ID) |
| entry = qp_broker_handle_to_entry(handle); |
| |
| if (!entry) { |
| create = true; |
| result = |
| qp_broker_create(handle, peer, flags, priv_flags, |
| produce_size, consume_size, page_store, |
| context, wakeup_cb, client_data, ent); |
| } else { |
| create = false; |
| result = |
| qp_broker_attach(entry, peer, flags, priv_flags, |
| produce_size, consume_size, page_store, |
| context, wakeup_cb, client_data, ent); |
| } |
| |
| mutex_unlock(&qp_broker_list.mutex); |
| |
| if (swap) |
| *swap = (context_id == VMCI_HOST_CONTEXT_ID) && |
| !(create && is_local); |
| |
| return result; |
| } |
| |
| /* |
| * This function implements the kernel API for allocating a queue |
| * pair. |
| */ |
| static int qp_alloc_host_work(struct vmci_handle *handle, |
| struct vmci_queue **produce_q, |
| u64 produce_size, |
| struct vmci_queue **consume_q, |
| u64 consume_size, |
| u32 peer, |
| u32 flags, |
| u32 priv_flags, |
| vmci_event_release_cb wakeup_cb, |
| void *client_data) |
| { |
| struct vmci_handle new_handle; |
| struct vmci_ctx *context; |
| struct qp_broker_entry *entry; |
| int result; |
| bool swap; |
| |
| if (vmci_handle_is_invalid(*handle)) { |
| new_handle = vmci_make_handle( |
| VMCI_HOST_CONTEXT_ID, VMCI_INVALID_ID); |
| } else |
| new_handle = *handle; |
| |
| context = vmci_ctx_get(VMCI_HOST_CONTEXT_ID); |
| entry = NULL; |
| result = |
| qp_broker_alloc(new_handle, peer, flags, priv_flags, |
| produce_size, consume_size, NULL, context, |
| wakeup_cb, client_data, &entry, &swap); |
| if (result == VMCI_SUCCESS) { |
| if (swap) { |
| /* |
| * If this is a local queue pair, the attacher |
| * will swap around produce and consume |
| * queues. |
| */ |
| |
| *produce_q = entry->consume_q; |
| *consume_q = entry->produce_q; |
| } else { |
| *produce_q = entry->produce_q; |
| *consume_q = entry->consume_q; |
| } |
| |
| *handle = vmci_resource_handle(&entry->resource); |
| } else { |
| *handle = VMCI_INVALID_HANDLE; |
| pr_devel("queue pair broker failed to alloc (result=%d)\n", |
| result); |
| } |
| vmci_ctx_put(context); |
| return result; |
| } |
| |
| /* |
| * Allocates a VMCI queue_pair. Only checks validity of input |
| * arguments. The real work is done in the host or guest |
| * specific function. |
| */ |
| int vmci_qp_alloc(struct vmci_handle *handle, |
| struct vmci_queue **produce_q, |
| u64 produce_size, |
| struct vmci_queue **consume_q, |
| u64 consume_size, |
| u32 peer, |
| u32 flags, |
| u32 priv_flags, |
| bool guest_endpoint, |
| vmci_event_release_cb wakeup_cb, |
| void *client_data) |
| { |
| if (!handle || !produce_q || !consume_q || |
| (!produce_size && !consume_size) || (flags & ~VMCI_QP_ALL_FLAGS)) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| if (guest_endpoint) { |
| return qp_alloc_guest_work(handle, produce_q, |
| produce_size, consume_q, |
| consume_size, peer, |
| flags, priv_flags); |
| } else { |
| return qp_alloc_host_work(handle, produce_q, |
| produce_size, consume_q, |
| consume_size, peer, flags, |
| priv_flags, wakeup_cb, client_data); |
| } |
| } |
| |
| /* |
| * This function implements the host kernel API for detaching from |
| * a queue pair. |
| */ |
| static int qp_detatch_host_work(struct vmci_handle handle) |
| { |
| int result; |
| struct vmci_ctx *context; |
| |
| context = vmci_ctx_get(VMCI_HOST_CONTEXT_ID); |
| |
| result = vmci_qp_broker_detach(handle, context); |
| |
| vmci_ctx_put(context); |
| return result; |
| } |
| |
| /* |
| * Detaches from a VMCI queue_pair. Only checks validity of input argument. |
| * Real work is done in the host or guest specific function. |
| */ |
| static int qp_detatch(struct vmci_handle handle, bool guest_endpoint) |
| { |
| if (vmci_handle_is_invalid(handle)) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| if (guest_endpoint) |
| return qp_detatch_guest_work(handle); |
| else |
| return qp_detatch_host_work(handle); |
| } |
| |
| /* |
| * Returns the entry from the head of the list. Assumes that the list is |
| * locked. |
| */ |
| static struct qp_entry *qp_list_get_head(struct qp_list *qp_list) |
| { |
| if (!list_empty(&qp_list->head)) { |
| struct qp_entry *entry = |
| list_first_entry(&qp_list->head, struct qp_entry, |
| list_item); |
| return entry; |
| } |
| |
| return NULL; |
| } |
| |
| void vmci_qp_broker_exit(void) |
| { |
| struct qp_entry *entry; |
| struct qp_broker_entry *be; |
| |
| mutex_lock(&qp_broker_list.mutex); |
| |
| while ((entry = qp_list_get_head(&qp_broker_list))) { |
| be = (struct qp_broker_entry *)entry; |
| |
| qp_list_remove_entry(&qp_broker_list, entry); |
| kfree(be); |
| } |
| |
| mutex_unlock(&qp_broker_list.mutex); |
| } |
| |
| /* |
| * Requests that a queue pair be allocated with the VMCI queue |
| * pair broker. Allocates a queue pair entry if one does not |
| * exist. Attaches to one if it exists, and retrieves the page |
| * files backing that queue_pair. Assumes that the queue pair |
| * broker lock is held. |
| */ |
| int vmci_qp_broker_alloc(struct vmci_handle handle, |
| u32 peer, |
| u32 flags, |
| u32 priv_flags, |
| u64 produce_size, |
| u64 consume_size, |
| struct vmci_qp_page_store *page_store, |
| struct vmci_ctx *context) |
| { |
| if (!QP_SIZES_ARE_VALID(produce_size, consume_size)) |
| return VMCI_ERROR_NO_RESOURCES; |
| |
| return qp_broker_alloc(handle, peer, flags, priv_flags, |
| produce_size, consume_size, |
| page_store, context, NULL, NULL, NULL, NULL); |
| } |
| |
| /* |
| * VMX'en with versions lower than VMCI_VERSION_NOVMVM use a separate |
| * step to add the UVAs of the VMX mapping of the queue pair. This function |
| * provides backwards compatibility with such VMX'en, and takes care of |
| * registering the page store for a queue pair previously allocated by the |
| * VMX during create or attach. This function will move the queue pair state |
| * to either from VMCIQBP_CREATED_NO_MEM to VMCIQBP_CREATED_MEM or |
| * VMCIQBP_ATTACHED_NO_MEM to VMCIQBP_ATTACHED_MEM. If moving to the |
| * attached state with memory, the queue pair is ready to be used by the |
| * host peer, and an attached event will be generated. |
| * |
| * Assumes that the queue pair broker lock is held. |
| * |
| * This function is only used by the hosted platform, since there is no |
| * issue with backwards compatibility for vmkernel. |
| */ |
| int vmci_qp_broker_set_page_store(struct vmci_handle handle, |
| u64 produce_uva, |
| u64 consume_uva, |
| struct vmci_ctx *context) |
| { |
| struct qp_broker_entry *entry; |
| int result; |
| const u32 context_id = vmci_ctx_get_id(context); |
| |
| if (vmci_handle_is_invalid(handle) || !context || |
| context_id == VMCI_INVALID_ID) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| /* |
| * We only support guest to host queue pairs, so the VMX must |
| * supply UVAs for the mapped page files. |
| */ |
| |
| if (produce_uva == 0 || consume_uva == 0) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| mutex_lock(&qp_broker_list.mutex); |
| |
| if (!vmci_ctx_qp_exists(context, handle)) { |
| pr_warn("Context (ID=0x%x) not attached to queue pair (handle=0x%x:0x%x)\n", |
| context_id, handle.context, handle.resource); |
| result = VMCI_ERROR_NOT_FOUND; |
| goto out; |
| } |
| |
| entry = qp_broker_handle_to_entry(handle); |
| if (!entry) { |
| result = VMCI_ERROR_NOT_FOUND; |
| goto out; |
| } |
| |
| /* |
| * If I'm the owner then I can set the page store. |
| * |
| * Or, if a host created the queue_pair and I'm the attached peer |
| * then I can set the page store. |
| */ |
| if (entry->create_id != context_id && |
| (entry->create_id != VMCI_HOST_CONTEXT_ID || |
| entry->attach_id != context_id)) { |
| result = VMCI_ERROR_QUEUEPAIR_NOTOWNER; |
| goto out; |
| } |
| |
| if (entry->state != VMCIQPB_CREATED_NO_MEM && |
| entry->state != VMCIQPB_ATTACHED_NO_MEM) { |
| result = VMCI_ERROR_UNAVAILABLE; |
| goto out; |
| } |
| |
| result = qp_host_get_user_memory(produce_uva, consume_uva, |
| entry->produce_q, entry->consume_q); |
| if (result < VMCI_SUCCESS) |
| goto out; |
| |
| result = qp_host_map_queues(entry->produce_q, entry->consume_q); |
| if (result < VMCI_SUCCESS) { |
| qp_host_unregister_user_memory(entry->produce_q, |
| entry->consume_q); |
| goto out; |
| } |
| |
| if (entry->state == VMCIQPB_CREATED_NO_MEM) |
| entry->state = VMCIQPB_CREATED_MEM; |
| else |
| entry->state = VMCIQPB_ATTACHED_MEM; |
| |
| entry->vmci_page_files = true; |
| |
| if (entry->state == VMCIQPB_ATTACHED_MEM) { |
| result = |
| qp_notify_peer(true, handle, context_id, entry->create_id); |
| if (result < VMCI_SUCCESS) { |
| pr_warn("Failed to notify peer (ID=0x%x) of attach to queue pair (handle=0x%x:0x%x)\n", |
| entry->create_id, entry->qp.handle.context, |
| entry->qp.handle.resource); |
| } |
| } |
| |
| result = VMCI_SUCCESS; |
| out: |
| mutex_unlock(&qp_broker_list.mutex); |
| return result; |
| } |
| |
| /* |
| * Resets saved queue headers for the given QP broker |
| * entry. Should be used when guest memory becomes available |
| * again, or the guest detaches. |
| */ |
| static void qp_reset_saved_headers(struct qp_broker_entry *entry) |
| { |
| entry->produce_q->saved_header = NULL; |
| entry->consume_q->saved_header = NULL; |
| } |
| |
| /* |
| * The main entry point for detaching from a queue pair registered with the |
| * queue pair broker. If more than one endpoint is attached to the queue |
| * pair, the first endpoint will mainly decrement a reference count and |
| * generate a notification to its peer. The last endpoint will clean up |
| * the queue pair state registered with the broker. |
| * |
| * When a guest endpoint detaches, it will unmap and unregister the guest |
| * memory backing the queue pair. If the host is still attached, it will |
| * no longer be able to access the queue pair content. |
| * |
| * If the queue pair is already in a state where there is no memory |
| * registered for the queue pair (any *_NO_MEM state), it will transition to |
| * the VMCIQPB_SHUTDOWN_NO_MEM state. This will also happen, if a guest |
| * endpoint is the first of two endpoints to detach. If the host endpoint is |
| * the first out of two to detach, the queue pair will move to the |
| * VMCIQPB_SHUTDOWN_MEM state. |
| */ |
| int vmci_qp_broker_detach(struct vmci_handle handle, struct vmci_ctx *context) |
| { |
| struct qp_broker_entry *entry; |
| const u32 context_id = vmci_ctx_get_id(context); |
| u32 peer_id; |
| bool is_local = false; |
| int result; |
| |
| if (vmci_handle_is_invalid(handle) || !context || |
| context_id == VMCI_INVALID_ID) { |
| return VMCI_ERROR_INVALID_ARGS; |
| } |
| |
| mutex_lock(&qp_broker_list.mutex); |
| |
| if (!vmci_ctx_qp_exists(context, handle)) { |
| pr_devel("Context (ID=0x%x) not attached to queue pair (handle=0x%x:0x%x)\n", |
| context_id, handle.context, handle.resource); |
| result = VMCI_ERROR_NOT_FOUND; |
| goto out; |
| } |
| |
| entry = qp_broker_handle_to_entry(handle); |
| if (!entry) { |
| pr_devel("Context (ID=0x%x) reports being attached to queue pair(handle=0x%x:0x%x) that isn't present in broker\n", |
| context_id, handle.context, handle.resource); |
| result = VMCI_ERROR_NOT_FOUND; |
| goto out; |
| } |
| |
| if (context_id != entry->create_id && context_id != entry->attach_id) { |
| result = VMCI_ERROR_QUEUEPAIR_NOTATTACHED; |
| goto out; |
| } |
| |
| if (context_id == entry->create_id) { |
| peer_id = entry->attach_id; |
| entry->create_id = VMCI_INVALID_ID; |
| } else { |
| peer_id = entry->create_id; |
| entry->attach_id = VMCI_INVALID_ID; |
| } |
| entry->qp.ref_count--; |
| |
| is_local = entry->qp.flags & VMCI_QPFLAG_LOCAL; |
| |
| if (context_id != VMCI_HOST_CONTEXT_ID) { |
| bool headers_mapped; |
| |
| /* |
| * Pre NOVMVM vmx'en may detach from a queue pair |
| * before setting the page store, and in that case |
| * there is no user memory to detach from. Also, more |
| * recent VMX'en may detach from a queue pair in the |
| * quiesced state. |
| */ |
| |
| qp_acquire_queue_mutex(entry->produce_q); |
| headers_mapped = entry->produce_q->q_header || |
| entry->consume_q->q_header; |
| if (QPBROKERSTATE_HAS_MEM(entry)) { |
| result = |
| qp_host_unmap_queues(INVALID_VMCI_GUEST_MEM_ID, |
| entry->produce_q, |
| entry->consume_q); |
| if (result < VMCI_SUCCESS) |
| pr_warn("Failed to unmap queue headers for queue pair (handle=0x%x:0x%x,result=%d)\n", |
| handle.context, handle.resource, |
| result); |
| |
| qp_host_unregister_user_memory(entry->produce_q, |
| entry->consume_q); |
| |
| } |
| |
| if (!headers_mapped) |
| qp_reset_saved_headers(entry); |
| |
| qp_release_queue_mutex(entry->produce_q); |
| |
| if (!headers_mapped && entry->wakeup_cb) |
| entry->wakeup_cb(entry->client_data); |
| |
| } else { |
| if (entry->wakeup_cb) { |
| entry->wakeup_cb = NULL; |
| entry->client_data = NULL; |
| } |
| } |
| |
| if (entry->qp.ref_count == 0) { |
| qp_list_remove_entry(&qp_broker_list, &entry->qp); |
| |
| if (is_local) |
| kfree(entry->local_mem); |
| |
| qp_cleanup_queue_mutex(entry->produce_q, entry->consume_q); |
| qp_host_free_queue(entry->produce_q, entry->qp.produce_size); |
| qp_host_free_queue(entry->consume_q, entry->qp.consume_size); |
| /* Unlink from resource hash table and free callback */ |
| vmci_resource_remove(&entry->resource); |
| |
| kfree(entry); |
| |
| vmci_ctx_qp_destroy(context, handle); |
| } else { |
| qp_notify_peer(false, handle, context_id, peer_id); |
| if (context_id == VMCI_HOST_CONTEXT_ID && |
| QPBROKERSTATE_HAS_MEM(entry)) { |
| entry->state = VMCIQPB_SHUTDOWN_MEM; |
| } else { |
| entry->state = VMCIQPB_SHUTDOWN_NO_MEM; |
| } |
| |
| if (!is_local) |
| vmci_ctx_qp_destroy(context, handle); |
| |
| } |
| result = VMCI_SUCCESS; |
| out: |
| mutex_unlock(&qp_broker_list.mutex); |
| return result; |
| } |
| |
| /* |
| * Establishes the necessary mappings for a queue pair given a |
| * reference to the queue pair guest memory. This is usually |
| * called when a guest is unquiesced and the VMX is allowed to |
| * map guest memory once again. |
| */ |
| int vmci_qp_broker_map(struct vmci_handle handle, |
| struct vmci_ctx *context, |
| u64 guest_mem) |
| { |
| struct qp_broker_entry *entry; |
| const u32 context_id = vmci_ctx_get_id(context); |
| int result; |
| |
| if (vmci_handle_is_invalid(handle) || !context || |
| context_id == VMCI_INVALID_ID) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| mutex_lock(&qp_broker_list.mutex); |
| |
| if (!vmci_ctx_qp_exists(context, handle)) { |
| pr_devel("Context (ID=0x%x) not attached to queue pair (handle=0x%x:0x%x)\n", |
| context_id, handle.context, handle.resource); |
| result = VMCI_ERROR_NOT_FOUND; |
| goto out; |
| } |
| |
| entry = qp_broker_handle_to_entry(handle); |
| if (!entry) { |
| pr_devel("Context (ID=0x%x) reports being attached to queue pair (handle=0x%x:0x%x) that isn't present in broker\n", |
| context_id, handle.context, handle.resource); |
| result = VMCI_ERROR_NOT_FOUND; |
| goto out; |
| } |
| |
| if (context_id != entry->create_id && context_id != entry->attach_id) { |
| result = VMCI_ERROR_QUEUEPAIR_NOTATTACHED; |
| goto out; |
| } |
| |
| result = VMCI_SUCCESS; |
| |
| if (context_id != VMCI_HOST_CONTEXT_ID && |
| !QPBROKERSTATE_HAS_MEM(entry)) { |
| struct vmci_qp_page_store page_store; |
| |
| page_store.pages = guest_mem; |
| page_store.len = QPE_NUM_PAGES(entry->qp); |
| |
| qp_acquire_queue_mutex(entry->produce_q); |
| qp_reset_saved_headers(entry); |
| result = |
| qp_host_register_user_memory(&page_store, |
| entry->produce_q, |
| entry->consume_q); |
| qp_release_queue_mutex(entry->produce_q); |
| if (result == VMCI_SUCCESS) { |
| /* Move state from *_NO_MEM to *_MEM */ |
| |
| entry->state++; |
| |
| if (entry->wakeup_cb) |
| entry->wakeup_cb(entry->client_data); |
| } |
| } |
| |
| out: |
| mutex_unlock(&qp_broker_list.mutex); |
| return result; |
| } |
| |
| /* |
| * Saves a snapshot of the queue headers for the given QP broker |
| * entry. Should be used when guest memory is unmapped. |
| * Results: |
| * VMCI_SUCCESS on success, appropriate error code if guest memory |
| * can't be accessed.. |
| */ |
| static int qp_save_headers(struct qp_broker_entry *entry) |
| { |
| int result; |
| |
| if (entry->produce_q->saved_header != NULL && |
| entry->consume_q->saved_header != NULL) { |
| /* |
| * If the headers have already been saved, we don't need to do |
| * it again, and we don't want to map in the headers |
| * unnecessarily. |
| */ |
| |
| return VMCI_SUCCESS; |
| } |
| |
| if (NULL == entry->produce_q->q_header || |
| NULL == entry->consume_q->q_header) { |
| result = qp_host_map_queues(entry->produce_q, entry->consume_q); |
| if (result < VMCI_SUCCESS) |
| return result; |
| } |
| |
| memcpy(&entry->saved_produce_q, entry->produce_q->q_header, |
| sizeof(entry->saved_produce_q)); |
| entry->produce_q->saved_header = &entry->saved_produce_q; |
| memcpy(&entry->saved_consume_q, entry->consume_q->q_header, |
| sizeof(entry->saved_consume_q)); |
| entry->consume_q->saved_header = &entry->saved_consume_q; |
| |
| return VMCI_SUCCESS; |
| } |
| |
| /* |
| * Removes all references to the guest memory of a given queue pair, and |
| * will move the queue pair from state *_MEM to *_NO_MEM. It is usually |
| * called when a VM is being quiesced where access to guest memory should |
| * avoided. |
| */ |
| int vmci_qp_broker_unmap(struct vmci_handle handle, |
| struct vmci_ctx *context, |
| u32 gid) |
| { |
| struct qp_broker_entry *entry; |
| const u32 context_id = vmci_ctx_get_id(context); |
| int result; |
| |
| if (vmci_handle_is_invalid(handle) || !context || |
| context_id == VMCI_INVALID_ID) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| mutex_lock(&qp_broker_list.mutex); |
| |
| if (!vmci_ctx_qp_exists(context, handle)) { |
| pr_devel("Context (ID=0x%x) not attached to queue pair (handle=0x%x:0x%x)\n", |
| context_id, handle.context, handle.resource); |
| result = VMCI_ERROR_NOT_FOUND; |
| goto out; |
| } |
| |
| entry = qp_broker_handle_to_entry(handle); |
| if (!entry) { |
| pr_devel("Context (ID=0x%x) reports being attached to queue pair (handle=0x%x:0x%x) that isn't present in broker\n", |
| context_id, handle.context, handle.resource); |
| result = VMCI_ERROR_NOT_FOUND; |
| goto out; |
| } |
| |
| if (context_id != entry->create_id && context_id != entry->attach_id) { |
| result = VMCI_ERROR_QUEUEPAIR_NOTATTACHED; |
| goto out; |
| } |
| |
| if (context_id != VMCI_HOST_CONTEXT_ID && |
| QPBROKERSTATE_HAS_MEM(entry)) { |
| qp_acquire_queue_mutex(entry->produce_q); |
| result = qp_save_headers(entry); |
| if (result < VMCI_SUCCESS) |
| pr_warn("Failed to save queue headers for queue pair (handle=0x%x:0x%x,result=%d)\n", |
| handle.context, handle.resource, result); |
| |
| qp_host_unmap_queues(gid, entry->produce_q, entry->consume_q); |
| |
| /* |
| * On hosted, when we unmap queue pairs, the VMX will also |
| * unmap the guest memory, so we invalidate the previously |
| * registered memory. If the queue pair is mapped again at a |
| * later point in time, we will need to reregister the user |
| * memory with a possibly new user VA. |
| */ |
| qp_host_unregister_user_memory(entry->produce_q, |
| entry->consume_q); |
| |
| /* |
| * Move state from *_MEM to *_NO_MEM. |
| */ |
| entry->state--; |
| |
| qp_release_queue_mutex(entry->produce_q); |
| } |
| |
| result = VMCI_SUCCESS; |
| |
| out: |
| mutex_unlock(&qp_broker_list.mutex); |
| return result; |
| } |
| |
| /* |
| * Destroys all guest queue pair endpoints. If active guest queue |
| * pairs still exist, hypercalls to attempt detach from these |
| * queue pairs will be made. Any failure to detach is silently |
| * ignored. |
| */ |
| void vmci_qp_guest_endpoints_exit(void) |
| { |
| struct qp_entry *entry; |
| struct qp_guest_endpoint *ep; |
| |
| mutex_lock(&qp_guest_endpoints.mutex); |
| |
| while ((entry = qp_list_get_head(&qp_guest_endpoints))) { |
| ep = (struct qp_guest_endpoint *)entry; |
| |
| /* Don't make a hypercall for local queue_pairs. */ |
| if (!(entry->flags & VMCI_QPFLAG_LOCAL)) |
| qp_detatch_hypercall(entry->handle); |
| |
| /* We cannot fail the exit, so let's reset ref_count. */ |
| entry->ref_count = 0; |
| qp_list_remove_entry(&qp_guest_endpoints, entry); |
| |
| qp_guest_endpoint_destroy(ep); |
| } |
| |
| mutex_unlock(&qp_guest_endpoints.mutex); |
| } |
| |
| /* |
| * Helper routine that will lock the queue pair before subsequent |
| * operations. |
| * Note: Non-blocking on the host side is currently only implemented in ESX. |
| * Since non-blocking isn't yet implemented on the host personality we |
| * have no reason to acquire a spin lock. So to avoid the use of an |
| * unnecessary lock only acquire the mutex if we can block. |
| */ |
| static void qp_lock(const struct vmci_qp *qpair) |
| { |
| qp_acquire_queue_mutex(qpair->produce_q); |
| } |
| |
| /* |
| * Helper routine that unlocks the queue pair after calling |
| * qp_lock. |
| */ |
| static void qp_unlock(const struct vmci_qp *qpair) |
| { |
| qp_release_queue_mutex(qpair->produce_q); |
| } |
| |
| /* |
| * The queue headers may not be mapped at all times. If a queue is |
| * currently not mapped, it will be attempted to do so. |
| */ |
| static int qp_map_queue_headers(struct vmci_queue *produce_q, |
| struct vmci_queue *consume_q) |
| { |
| int result; |
| |
| if (NULL == produce_q->q_header || NULL == consume_q->q_header) { |
| result = qp_host_map_queues(produce_q, consume_q); |
| if (result < VMCI_SUCCESS) |
| return (produce_q->saved_header && |
| consume_q->saved_header) ? |
| VMCI_ERROR_QUEUEPAIR_NOT_READY : |
| VMCI_ERROR_QUEUEPAIR_NOTATTACHED; |
| } |
| |
| return VMCI_SUCCESS; |
| } |
| |
| /* |
| * Helper routine that will retrieve the produce and consume |
| * headers of a given queue pair. If the guest memory of the |
| * queue pair is currently not available, the saved queue headers |
| * will be returned, if these are available. |
| */ |
| static int qp_get_queue_headers(const struct vmci_qp *qpair, |
| struct vmci_queue_header **produce_q_header, |
| struct vmci_queue_header **consume_q_header) |
| { |
| int result; |
| |
| result = qp_map_queue_headers(qpair->produce_q, qpair->consume_q); |
| if (result == VMCI_SUCCESS) { |
| *produce_q_header = qpair->produce_q->q_header; |
| *consume_q_header = qpair->consume_q->q_header; |
| } else if (qpair->produce_q->saved_header && |
| qpair->consume_q->saved_header) { |
| *produce_q_header = qpair->produce_q->saved_header; |
| *consume_q_header = qpair->consume_q->saved_header; |
| result = VMCI_SUCCESS; |
| } |
| |
| return result; |
| } |
| |
| /* |
| * Callback from VMCI queue pair broker indicating that a queue |
| * pair that was previously not ready, now either is ready or |
| * gone forever. |
| */ |
| static int qp_wakeup_cb(void *client_data) |
| { |
| struct vmci_qp *qpair = (struct vmci_qp *)client_data; |
| |
| qp_lock(qpair); |
| while (qpair->blocked > 0) { |
| qpair->blocked--; |
| qpair->generation++; |
| wake_up(&qpair->event); |
| } |
| qp_unlock(qpair); |
| |
| return VMCI_SUCCESS; |
| } |
| |
| /* |
| * Makes the calling thread wait for the queue pair to become |
| * ready for host side access. Returns true when thread is |
| * woken up after queue pair state change, false otherwise. |
| */ |
| static bool qp_wait_for_ready_queue(struct vmci_qp *qpair) |
| { |
| unsigned int generation; |
| |
| qpair->blocked++; |
| generation = qpair->generation; |
| qp_unlock(qpair); |
| wait_event(qpair->event, generation != qpair->generation); |
| qp_lock(qpair); |
| |
| return true; |
| } |
| |
| /* |
| * Enqueues a given buffer to the produce queue using the provided |
| * function. As many bytes as possible (space available in the queue) |
| * are enqueued. Assumes the queue->mutex has been acquired. Returns |
| * VMCI_ERROR_QUEUEPAIR_NOSPACE if no space was available to enqueue |
| * data, VMCI_ERROR_INVALID_SIZE, if any queue pointer is outside the |
| * queue (as defined by the queue size), VMCI_ERROR_INVALID_ARGS, if |
| * an error occured when accessing the buffer, |
| * VMCI_ERROR_QUEUEPAIR_NOTATTACHED, if the queue pair pages aren't |
| * available. Otherwise, the number of bytes written to the queue is |
| * returned. Updates the tail pointer of the produce queue. |
| */ |
| static ssize_t qp_enqueue_locked(struct vmci_queue *produce_q, |
| struct vmci_queue *consume_q, |
| const u64 produce_q_size, |
| struct iov_iter *from) |
| { |
| s64 free_space; |
| u64 tail; |
| size_t buf_size = iov_iter_count(from); |
| size_t written; |
| ssize_t result; |
| |
| result = qp_map_queue_headers(produce_q, consume_q); |
| if (unlikely(result != VMCI_SUCCESS)) |
| return result; |
| |
| free_space = vmci_q_header_free_space(produce_q->q_header, |
| consume_q->q_header, |
| produce_q_size); |
| if (free_space == 0) |
| return VMCI_ERROR_QUEUEPAIR_NOSPACE; |
| |
| if (free_space < VMCI_SUCCESS) |
| return (ssize_t) free_space; |
| |
| written = (size_t) (free_space > buf_size ? buf_size : free_space); |
| tail = vmci_q_header_producer_tail(produce_q->q_header); |
| if (likely(tail + written < produce_q_size)) { |
| result = qp_memcpy_to_queue_iter(produce_q, tail, from, written); |
| } else { |
| /* Tail pointer wraps around. */ |
| |
| const size_t tmp = (size_t) (produce_q_size - tail); |
| |
| result = qp_memcpy_to_queue_iter(produce_q, tail, from, tmp); |
| if (result >= VMCI_SUCCESS) |
| result = qp_memcpy_to_queue_iter(produce_q, 0, from, |
| written - tmp); |
| } |
| |
| if (result < VMCI_SUCCESS) |
| return result; |
| |
| /* |
| * This virt_wmb() ensures that data written to the queue |
| * is observable before the new producer_tail is. |
| */ |
| virt_wmb(); |
| |
| vmci_q_header_add_producer_tail(produce_q->q_header, written, |
| produce_q_size); |
| return written; |
| } |
| |
| /* |
| * Dequeues data (if available) from the given consume queue. Writes data |
| * to the user provided buffer using the provided function. |
| * Assumes the queue->mutex has been acquired. |
| * Results: |
| * VMCI_ERROR_QUEUEPAIR_NODATA if no data was available to dequeue. |
| * VMCI_ERROR_INVALID_SIZE, if any queue pointer is outside the queue |
| * (as defined by the queue size). |
| * VMCI_ERROR_INVALID_ARGS, if an error occured when accessing the buffer. |
| * Otherwise the number of bytes dequeued is returned. |
| * Side effects: |
| * Updates the head pointer of the consume queue. |
| */ |
| static ssize_t qp_dequeue_locked(struct vmci_queue *produce_q, |
| struct vmci_queue *consume_q, |
| const u64 consume_q_size, |
| struct iov_iter *to, |
| bool update_consumer) |
| { |
| size_t buf_size = iov_iter_count(to); |
| s64 buf_ready; |
| u64 head; |
| size_t read; |
| ssize_t result; |
| |
| result = qp_map_queue_headers(produce_q, consume_q); |
| if (unlikely(result != VMCI_SUCCESS)) |
| return result; |
| |
| buf_ready = vmci_q_header_buf_ready(consume_q->q_header, |
| produce_q->q_header, |
| consume_q_size); |
| if (buf_ready == 0) |
| return VMCI_ERROR_QUEUEPAIR_NODATA; |
| |
| if (buf_ready < VMCI_SUCCESS) |
| return (ssize_t) buf_ready; |
| |
| /* |
| * This virt_rmb() ensures that data from the queue will be read |
| * after we have determined how much is ready to be consumed. |
| */ |
| virt_rmb(); |
| |
| read = (size_t) (buf_ready > buf_size ? buf_size : buf_ready); |
| head = vmci_q_header_consumer_head(produce_q->q_header); |
| if (likely(head + read < consume_q_size)) { |
| result = qp_memcpy_from_queue_iter(to, consume_q, head, read); |
| } else { |
| /* Head pointer wraps around. */ |
| |
| const size_t tmp = (size_t) (consume_q_size - head); |
| |
| result = qp_memcpy_from_queue_iter(to, consume_q, head, tmp); |
| if (result >= VMCI_SUCCESS) |
| result = qp_memcpy_from_queue_iter(to, consume_q, 0, |
| read - tmp); |
| |
| } |
| |
| if (result < VMCI_SUCCESS) |
| return result; |
| |
| if (update_consumer) |
| vmci_q_header_add_consumer_head(produce_q->q_header, |
| read, consume_q_size); |
| |
| return read; |
| } |
| |
| /* |
| * vmci_qpair_alloc() - Allocates a queue pair. |
| * @qpair: Pointer for the new vmci_qp struct. |
| * @handle: Handle to track the resource. |
| * @produce_qsize: Desired size of the producer queue. |
| * @consume_qsize: Desired size of the consumer queue. |
| * @peer: ContextID of the peer. |
| * @flags: VMCI flags. |
| * @priv_flags: VMCI priviledge flags. |
| * |
| * This is the client interface for allocating the memory for a |
| * vmci_qp structure and then attaching to the underlying |
| * queue. If an error occurs allocating the memory for the |
| * vmci_qp structure no attempt is made to attach. If an |
| * error occurs attaching, then the structure is freed. |
| */ |
| int vmci_qpair_alloc(struct vmci_qp **qpair, |
| struct vmci_handle *handle, |
| u64 produce_qsize, |
| u64 consume_qsize, |
| u32 peer, |
| u32 flags, |
| u32 priv_flags) |
| { |
| struct vmci_qp *my_qpair; |
| int retval; |
| struct vmci_handle src = VMCI_INVALID_HANDLE; |
| struct vmci_handle dst = vmci_make_handle(peer, VMCI_INVALID_ID); |
| enum vmci_route route; |
| vmci_event_release_cb wakeup_cb; |
| void *client_data; |
| |
| /* |
| * Restrict the size of a queuepair. The device already |
| * enforces a limit on the total amount of memory that can be |
| * allocated to queuepairs for a guest. However, we try to |
| * allocate this memory before we make the queuepair |
| * allocation hypercall. On Linux, we allocate each page |
| * separately, which means rather than fail, the guest will |
| * thrash while it tries to allocate, and will become |
| * increasingly unresponsive to the point where it appears to |
| * be hung. So we place a limit on the size of an individual |
| * queuepair here, and leave the device to enforce the |
| * restriction on total queuepair memory. (Note that this |
| * doesn't prevent all cases; a user with only this much |
| * physical memory could still get into trouble.) The error |
| * used by the device is NO_RESOURCES, so use that here too. |
| */ |
| |
| if (!QP_SIZES_ARE_VALID(produce_qsize, consume_qsize)) |
| return VMCI_ERROR_NO_RESOURCES; |
| |
| retval = vmci_route(&src, &dst, false, &route); |
| if (retval < VMCI_SUCCESS) |
| route = vmci_guest_code_active() ? |
| VMCI_ROUTE_AS_GUEST : VMCI_ROUTE_AS_HOST; |
| |
| if (flags & (VMCI_QPFLAG_NONBLOCK | VMCI_QPFLAG_PINNED)) { |
| pr_devel("NONBLOCK OR PINNED set"); |
| return VMCI_ERROR_INVALID_ARGS; |
| } |
| |
| my_qpair = kzalloc(sizeof(*my_qpair), GFP_KERNEL); |
| if (!my_qpair) |
| return VMCI_ERROR_NO_MEM; |
| |
| my_qpair->produce_q_size = produce_qsize; |
| my_qpair->consume_q_size = consume_qsize; |
| my_qpair->peer = peer; |
| my_qpair->flags = flags; |
| my_qpair->priv_flags = priv_flags; |
| |
| wakeup_cb = NULL; |
| client_data = NULL; |
| |
| if (VMCI_ROUTE_AS_HOST == route) { |
| my_qpair->guest_endpoint = false; |
| if (!(flags & VMCI_QPFLAG_LOCAL)) { |
| my_qpair->blocked = 0; |
| my_qpair->generation = 0; |
| init_waitqueue_head(&my_qpair->event); |
| wakeup_cb = qp_wakeup_cb; |
| client_data = (void *)my_qpair; |
| } |
| } else { |
| my_qpair->guest_endpoint = true; |
| } |
| |
| retval = vmci_qp_alloc(handle, |
| &my_qpair->produce_q, |
| my_qpair->produce_q_size, |
| &my_qpair->consume_q, |
| my_qpair->consume_q_size, |
| my_qpair->peer, |
| my_qpair->flags, |
| my_qpair->priv_flags, |
| my_qpair->guest_endpoint, |
| wakeup_cb, client_data); |
| |
| if (retval < VMCI_SUCCESS) { |
| kfree(my_qpair); |
| return retval; |
| } |
| |
| *qpair = my_qpair; |
| my_qpair->handle = *handle; |
| |
| return retval; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_alloc); |
| |
| /* |
| * vmci_qpair_detach() - Detatches the client from a queue pair. |
| * @qpair: Reference of a pointer to the qpair struct. |
| * |
| * This is the client interface for detaching from a VMCIQPair. |
| * Note that this routine will free the memory allocated for the |
| * vmci_qp structure too. |
| */ |
| int vmci_qpair_detach(struct vmci_qp **qpair) |
| { |
| int result; |
| struct vmci_qp *old_qpair; |
| |
| if (!qpair || !(*qpair)) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| old_qpair = *qpair; |
| result = qp_detatch(old_qpair->handle, old_qpair->guest_endpoint); |
| |
| /* |
| * The guest can fail to detach for a number of reasons, and |
| * if it does so, it will cleanup the entry (if there is one). |
| * The host can fail too, but it won't cleanup the entry |
| * immediately, it will do that later when the context is |
| * freed. Either way, we need to release the qpair struct |
| * here; there isn't much the caller can do, and we don't want |
| * to leak. |
| */ |
| |
| memset(old_qpair, 0, sizeof(*old_qpair)); |
| old_qpair->handle = VMCI_INVALID_HANDLE; |
| old_qpair->peer = VMCI_INVALID_ID; |
| kfree(old_qpair); |
| *qpair = NULL; |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_detach); |
| |
| /* |
| * vmci_qpair_get_produce_indexes() - Retrieves the indexes of the producer. |
| * @qpair: Pointer to the queue pair struct. |
| * @producer_tail: Reference used for storing producer tail index. |
| * @consumer_head: Reference used for storing the consumer head index. |
| * |
| * This is the client interface for getting the current indexes of the |
| * QPair from the point of the view of the caller as the producer. |
| */ |
| int vmci_qpair_get_produce_indexes(const struct vmci_qp *qpair, |
| u64 *producer_tail, |
| u64 *consumer_head) |
| { |
| struct vmci_queue_header *produce_q_header; |
| struct vmci_queue_header *consume_q_header; |
| int result; |
| |
| if (!qpair) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| qp_lock(qpair); |
| result = |
| qp_get_queue_headers(qpair, &produce_q_header, &consume_q_header); |
| if (result == VMCI_SUCCESS) |
| vmci_q_header_get_pointers(produce_q_header, consume_q_header, |
| producer_tail, consumer_head); |
| qp_unlock(qpair); |
| |
| if (result == VMCI_SUCCESS && |
| ((producer_tail && *producer_tail >= qpair->produce_q_size) || |
| (consumer_head && *consumer_head >= qpair->produce_q_size))) |
| return VMCI_ERROR_INVALID_SIZE; |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_get_produce_indexes); |
| |
| /* |
| * vmci_qpair_get_consume_indexes() - Retrieves the indexes of the consumer. |
| * @qpair: Pointer to the queue pair struct. |
| * @consumer_tail: Reference used for storing consumer tail index. |
| * @producer_head: Reference used for storing the producer head index. |
| * |
| * This is the client interface for getting the current indexes of the |
| * QPair from the point of the view of the caller as the consumer. |
| */ |
| int vmci_qpair_get_consume_indexes(const struct vmci_qp *qpair, |
| u64 *consumer_tail, |
| u64 *producer_head) |
| { |
| struct vmci_queue_header *produce_q_header; |
| struct vmci_queue_header *consume_q_header; |
| int result; |
| |
| if (!qpair) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| qp_lock(qpair); |
| result = |
| qp_get_queue_headers(qpair, &produce_q_header, &consume_q_header); |
| if (result == VMCI_SUCCESS) |
| vmci_q_header_get_pointers(consume_q_header, produce_q_header, |
| consumer_tail, producer_head); |
| qp_unlock(qpair); |
| |
| if (result == VMCI_SUCCESS && |
| ((consumer_tail && *consumer_tail >= qpair->consume_q_size) || |
| (producer_head && *producer_head >= qpair->consume_q_size))) |
| return VMCI_ERROR_INVALID_SIZE; |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_get_consume_indexes); |
| |
| /* |
| * vmci_qpair_produce_free_space() - Retrieves free space in producer queue. |
| * @qpair: Pointer to the queue pair struct. |
| * |
| * This is the client interface for getting the amount of free |
| * space in the QPair from the point of the view of the caller as |
| * the producer which is the common case. Returns < 0 if err, else |
| * available bytes into which data can be enqueued if > 0. |
| */ |
| s64 vmci_qpair_produce_free_space(const struct vmci_qp *qpair) |
| { |
| struct vmci_queue_header *produce_q_header; |
| struct vmci_queue_header *consume_q_header; |
| s64 result; |
| |
| if (!qpair) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| qp_lock(qpair); |
| result = |
| qp_get_queue_headers(qpair, &produce_q_header, &consume_q_header); |
| if (result == VMCI_SUCCESS) |
| result = vmci_q_header_free_space(produce_q_header, |
| consume_q_header, |
| qpair->produce_q_size); |
| else |
| result = 0; |
| |
| qp_unlock(qpair); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_produce_free_space); |
| |
| /* |
| * vmci_qpair_consume_free_space() - Retrieves free space in consumer queue. |
| * @qpair: Pointer to the queue pair struct. |
| * |
| * This is the client interface for getting the amount of free |
| * space in the QPair from the point of the view of the caller as |
| * the consumer which is not the common case. Returns < 0 if err, else |
| * available bytes into which data can be enqueued if > 0. |
| */ |
| s64 vmci_qpair_consume_free_space(const struct vmci_qp *qpair) |
| { |
| struct vmci_queue_header *produce_q_header; |
| struct vmci_queue_header *consume_q_header; |
| s64 result; |
| |
| if (!qpair) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| qp_lock(qpair); |
| result = |
| qp_get_queue_headers(qpair, &produce_q_header, &consume_q_header); |
| if (result == VMCI_SUCCESS) |
| result = vmci_q_header_free_space(consume_q_header, |
| produce_q_header, |
| qpair->consume_q_size); |
| else |
| result = 0; |
| |
| qp_unlock(qpair); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_consume_free_space); |
| |
| /* |
| * vmci_qpair_produce_buf_ready() - Gets bytes ready to read from |
| * producer queue. |
| * @qpair: Pointer to the queue pair struct. |
| * |
| * This is the client interface for getting the amount of |
| * enqueued data in the QPair from the point of the view of the |
| * caller as the producer which is not the common case. Returns < 0 if err, |
| * else available bytes that may be read. |
| */ |
| s64 vmci_qpair_produce_buf_ready(const struct vmci_qp *qpair) |
| { |
| struct vmci_queue_header *produce_q_header; |
| struct vmci_queue_header *consume_q_header; |
| s64 result; |
| |
| if (!qpair) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| qp_lock(qpair); |
| result = |
| qp_get_queue_headers(qpair, &produce_q_header, &consume_q_header); |
| if (result == VMCI_SUCCESS) |
| result = vmci_q_header_buf_ready(produce_q_header, |
| consume_q_header, |
| qpair->produce_q_size); |
| else |
| result = 0; |
| |
| qp_unlock(qpair); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_produce_buf_ready); |
| |
| /* |
| * vmci_qpair_consume_buf_ready() - Gets bytes ready to read from |
| * consumer queue. |
| * @qpair: Pointer to the queue pair struct. |
| * |
| * This is the client interface for getting the amount of |
| * enqueued data in the QPair from the point of the view of the |
| * caller as the consumer which is the normal case. Returns < 0 if err, |
| * else available bytes that may be read. |
| */ |
| s64 vmci_qpair_consume_buf_ready(const struct vmci_qp *qpair) |
| { |
| struct vmci_queue_header *produce_q_header; |
| struct vmci_queue_header *consume_q_header; |
| s64 result; |
| |
| if (!qpair) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| qp_lock(qpair); |
| result = |
| qp_get_queue_headers(qpair, &produce_q_header, &consume_q_header); |
| if (result == VMCI_SUCCESS) |
| result = vmci_q_header_buf_ready(consume_q_header, |
| produce_q_header, |
| qpair->consume_q_size); |
| else |
| result = 0; |
| |
| qp_unlock(qpair); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_consume_buf_ready); |
| |
| /* |
| * vmci_qpair_enqueue() - Throw data on the queue. |
| * @qpair: Pointer to the queue pair struct. |
| * @buf: Pointer to buffer containing data |
| * @buf_size: Length of buffer. |
| * @buf_type: Buffer type (Unused). |
| * |
| * This is the client interface for enqueueing data into the queue. |
| * Returns number of bytes enqueued or < 0 on error. |
| */ |
| ssize_t vmci_qpair_enqueue(struct vmci_qp *qpair, |
| const void *buf, |
| size_t buf_size, |
| int buf_type) |
| { |
| ssize_t result; |
| struct iov_iter from; |
| struct kvec v = {.iov_base = (void *)buf, .iov_len = buf_size}; |
| |
| if (!qpair || !buf) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| iov_iter_kvec(&from, WRITE, &v, 1, buf_size); |
| |
| qp_lock(qpair); |
| |
| do { |
| result = qp_enqueue_locked(qpair->produce_q, |
| qpair->consume_q, |
| qpair->produce_q_size, |
| &from); |
| |
| if (result == VMCI_ERROR_QUEUEPAIR_NOT_READY && |
| !qp_wait_for_ready_queue(qpair)) |
| result = VMCI_ERROR_WOULD_BLOCK; |
| |
| } while (result == VMCI_ERROR_QUEUEPAIR_NOT_READY); |
| |
| qp_unlock(qpair); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_enqueue); |
| |
| /* |
| * vmci_qpair_dequeue() - Get data from the queue. |
| * @qpair: Pointer to the queue pair struct. |
| * @buf: Pointer to buffer for the data |
| * @buf_size: Length of buffer. |
| * @buf_type: Buffer type (Unused). |
| * |
| * This is the client interface for dequeueing data from the queue. |
| * Returns number of bytes dequeued or < 0 on error. |
| */ |
| ssize_t vmci_qpair_dequeue(struct vmci_qp *qpair, |
| void *buf, |
| size_t buf_size, |
| int buf_type) |
| { |
| ssize_t result; |
| struct iov_iter to; |
| struct kvec v = {.iov_base = buf, .iov_len = buf_size}; |
| |
| if (!qpair || !buf) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| iov_iter_kvec(&to, READ, &v, 1, buf_size); |
| |
| qp_lock(qpair); |
| |
| do { |
| result = qp_dequeue_locked(qpair->produce_q, |
| qpair->consume_q, |
| qpair->consume_q_size, |
| &to, true); |
| |
| if (result == VMCI_ERROR_QUEUEPAIR_NOT_READY && |
| !qp_wait_for_ready_queue(qpair)) |
| result = VMCI_ERROR_WOULD_BLOCK; |
| |
| } while (result == VMCI_ERROR_QUEUEPAIR_NOT_READY); |
| |
| qp_unlock(qpair); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_dequeue); |
| |
| /* |
| * vmci_qpair_peek() - Peek at the data in the queue. |
| * @qpair: Pointer to the queue pair struct. |
| * @buf: Pointer to buffer for the data |
| * @buf_size: Length of buffer. |
| * @buf_type: Buffer type (Unused on Linux). |
| * |
| * This is the client interface for peeking into a queue. (I.e., |
| * copy data from the queue without updating the head pointer.) |
| * Returns number of bytes dequeued or < 0 on error. |
| */ |
| ssize_t vmci_qpair_peek(struct vmci_qp *qpair, |
| void *buf, |
| size_t buf_size, |
| int buf_type) |
| { |
| struct iov_iter to; |
| struct kvec v = {.iov_base = buf, .iov_len = buf_size}; |
| ssize_t result; |
| |
| if (!qpair || !buf) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| iov_iter_kvec(&to, READ, &v, 1, buf_size); |
| |
| qp_lock(qpair); |
| |
| do { |
| result = qp_dequeue_locked(qpair->produce_q, |
| qpair->consume_q, |
| qpair->consume_q_size, |
| &to, false); |
| |
| if (result == VMCI_ERROR_QUEUEPAIR_NOT_READY && |
| !qp_wait_for_ready_queue(qpair)) |
| result = VMCI_ERROR_WOULD_BLOCK; |
| |
| } while (result == VMCI_ERROR_QUEUEPAIR_NOT_READY); |
| |
| qp_unlock(qpair); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_peek); |
| |
| /* |
| * vmci_qpair_enquev() - Throw data on the queue using iov. |
| * @qpair: Pointer to the queue pair struct. |
| * @iov: Pointer to buffer containing data |
| * @iov_size: Length of buffer. |
| * @buf_type: Buffer type (Unused). |
| * |
| * This is the client interface for enqueueing data into the queue. |
| * This function uses IO vectors to handle the work. Returns number |
| * of bytes enqueued or < 0 on error. |
| */ |
| ssize_t vmci_qpair_enquev(struct vmci_qp *qpair, |
| struct msghdr *msg, |
| size_t iov_size, |
| int buf_type) |
| { |
| ssize_t result; |
| |
| if (!qpair) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| qp_lock(qpair); |
| |
| do { |
| result = qp_enqueue_locked(qpair->produce_q, |
| qpair->consume_q, |
| qpair->produce_q_size, |
| &msg->msg_iter); |
| |
| if (result == VMCI_ERROR_QUEUEPAIR_NOT_READY && |
| !qp_wait_for_ready_queue(qpair)) |
| result = VMCI_ERROR_WOULD_BLOCK; |
| |
| } while (result == VMCI_ERROR_QUEUEPAIR_NOT_READY); |
| |
| qp_unlock(qpair); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_enquev); |
| |
| /* |
| * vmci_qpair_dequev() - Get data from the queue using iov. |
| * @qpair: Pointer to the queue pair struct. |
| * @iov: Pointer to buffer for the data |
| * @iov_size: Length of buffer. |
| * @buf_type: Buffer type (Unused). |
| * |
| * This is the client interface for dequeueing data from the queue. |
| * This function uses IO vectors to handle the work. Returns number |
| * of bytes dequeued or < 0 on error. |
| */ |
| ssize_t vmci_qpair_dequev(struct vmci_qp *qpair, |
| struct msghdr *msg, |
| size_t iov_size, |
| int buf_type) |
| { |
| ssize_t result; |
| |
| if (!qpair) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| qp_lock(qpair); |
| |
| do { |
| result = qp_dequeue_locked(qpair->produce_q, |
| qpair->consume_q, |
| qpair->consume_q_size, |
| &msg->msg_iter, true); |
| |
| if (result == VMCI_ERROR_QUEUEPAIR_NOT_READY && |
| !qp_wait_for_ready_queue(qpair)) |
| result = VMCI_ERROR_WOULD_BLOCK; |
| |
| } while (result == VMCI_ERROR_QUEUEPAIR_NOT_READY); |
| |
| qp_unlock(qpair); |
| |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_dequev); |
| |
| /* |
| * vmci_qpair_peekv() - Peek at the data in the queue using iov. |
| * @qpair: Pointer to the queue pair struct. |
| * @iov: Pointer to buffer for the data |
| * @iov_size: Length of buffer. |
| * @buf_type: Buffer type (Unused on Linux). |
| * |
| * This is the client interface for peeking into a queue. (I.e., |
| * copy data from the queue without updating the head pointer.) |
| * This function uses IO vectors to handle the work. Returns number |
| * of bytes peeked or < 0 on error. |
| */ |
| ssize_t vmci_qpair_peekv(struct vmci_qp *qpair, |
| struct msghdr *msg, |
| size_t iov_size, |
| int buf_type) |
| { |
| ssize_t result; |
| |
| if (!qpair) |
| return VMCI_ERROR_INVALID_ARGS; |
| |
| qp_lock(qpair); |
| |
| do { |
| result = qp_dequeue_locked(qpair->produce_q, |
| qpair->consume_q, |
| qpair->consume_q_size, |
| &msg->msg_iter, false); |
| |
| if (result == VMCI_ERROR_QUEUEPAIR_NOT_READY && |
| !qp_wait_for_ready_queue(qpair)) |
| result = VMCI_ERROR_WOULD_BLOCK; |
| |
| } while (result == VMCI_ERROR_QUEUEPAIR_NOT_READY); |
| |
| qp_unlock(qpair); |
| return result; |
| } |
| EXPORT_SYMBOL_GPL(vmci_qpair_peekv); |