| // SPDX-License-Identifier: GPL-2.0 OR MIT |
| /************************************************************************** |
| * |
| * Copyright 2009-2022 VMware, Inc., Palo Alto, CA., USA |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, |
| * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR |
| * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE |
| * USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| **************************************************************************/ |
| |
| #include "vmwgfx_kms.h" |
| #include "vmw_surface_cache.h" |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_damage_helper.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_rect.h> |
| #include <drm/drm_sysfs.h> |
| |
| void vmw_du_cleanup(struct vmw_display_unit *du) |
| { |
| struct vmw_private *dev_priv = vmw_priv(du->primary.dev); |
| drm_plane_cleanup(&du->primary); |
| if (vmw_cmd_supported(dev_priv)) |
| drm_plane_cleanup(&du->cursor.base); |
| |
| drm_connector_unregister(&du->connector); |
| drm_crtc_cleanup(&du->crtc); |
| drm_encoder_cleanup(&du->encoder); |
| drm_connector_cleanup(&du->connector); |
| } |
| |
| /* |
| * Display Unit Cursor functions |
| */ |
| |
| static int vmw_du_cursor_plane_unmap_cm(struct vmw_plane_state *vps); |
| static void vmw_cursor_update_mob(struct vmw_private *dev_priv, |
| struct vmw_plane_state *vps, |
| u32 *image, u32 width, u32 height, |
| u32 hotspotX, u32 hotspotY); |
| |
| struct vmw_svga_fifo_cmd_define_cursor { |
| u32 cmd; |
| SVGAFifoCmdDefineAlphaCursor cursor; |
| }; |
| |
| /** |
| * vmw_send_define_cursor_cmd - queue a define cursor command |
| * @dev_priv: the private driver struct |
| * @image: buffer which holds the cursor image |
| * @width: width of the mouse cursor image |
| * @height: height of the mouse cursor image |
| * @hotspotX: the horizontal position of mouse hotspot |
| * @hotspotY: the vertical position of mouse hotspot |
| */ |
| static void vmw_send_define_cursor_cmd(struct vmw_private *dev_priv, |
| u32 *image, u32 width, u32 height, |
| u32 hotspotX, u32 hotspotY) |
| { |
| struct vmw_svga_fifo_cmd_define_cursor *cmd; |
| const u32 image_size = width * height * sizeof(*image); |
| const u32 cmd_size = sizeof(*cmd) + image_size; |
| |
| /* Try to reserve fifocmd space and swallow any failures; |
| such reservations cannot be left unconsumed for long |
| under the risk of clogging other fifocmd users, so |
| we treat reservations separtely from the way we treat |
| other fallible KMS-atomic resources at prepare_fb */ |
| cmd = VMW_CMD_RESERVE(dev_priv, cmd_size); |
| |
| if (unlikely(!cmd)) |
| return; |
| |
| memset(cmd, 0, sizeof(*cmd)); |
| |
| memcpy(&cmd[1], image, image_size); |
| |
| cmd->cmd = SVGA_CMD_DEFINE_ALPHA_CURSOR; |
| cmd->cursor.id = 0; |
| cmd->cursor.width = width; |
| cmd->cursor.height = height; |
| cmd->cursor.hotspotX = hotspotX; |
| cmd->cursor.hotspotY = hotspotY; |
| |
| vmw_cmd_commit_flush(dev_priv, cmd_size); |
| } |
| |
| /** |
| * vmw_cursor_update_image - update the cursor image on the provided plane |
| * @dev_priv: the private driver struct |
| * @vps: the plane state of the cursor plane |
| * @image: buffer which holds the cursor image |
| * @width: width of the mouse cursor image |
| * @height: height of the mouse cursor image |
| * @hotspotX: the horizontal position of mouse hotspot |
| * @hotspotY: the vertical position of mouse hotspot |
| */ |
| static void vmw_cursor_update_image(struct vmw_private *dev_priv, |
| struct vmw_plane_state *vps, |
| u32 *image, u32 width, u32 height, |
| u32 hotspotX, u32 hotspotY) |
| { |
| if (vps->cursor.bo) |
| vmw_cursor_update_mob(dev_priv, vps, image, |
| vps->base.crtc_w, vps->base.crtc_h, |
| hotspotX, hotspotY); |
| |
| else |
| vmw_send_define_cursor_cmd(dev_priv, image, width, height, |
| hotspotX, hotspotY); |
| } |
| |
| |
| /** |
| * vmw_cursor_update_mob - Update cursor vis CursorMob mechanism |
| * |
| * Called from inside vmw_du_cursor_plane_atomic_update to actually |
| * make the cursor-image live. |
| * |
| * @dev_priv: device to work with |
| * @vps: the plane state of the cursor plane |
| * @image: cursor source data to fill the MOB with |
| * @width: source data width |
| * @height: source data height |
| * @hotspotX: cursor hotspot x |
| * @hotspotY: cursor hotspot Y |
| */ |
| static void vmw_cursor_update_mob(struct vmw_private *dev_priv, |
| struct vmw_plane_state *vps, |
| u32 *image, u32 width, u32 height, |
| u32 hotspotX, u32 hotspotY) |
| { |
| SVGAGBCursorHeader *header; |
| SVGAGBAlphaCursorHeader *alpha_header; |
| const u32 image_size = width * height * sizeof(*image); |
| bool dummy; |
| |
| header = ttm_kmap_obj_virtual(&vps->cursor.map, &dummy); |
| alpha_header = &header->header.alphaHeader; |
| |
| memset(header, 0, sizeof(*header)); |
| |
| header->type = SVGA_ALPHA_CURSOR; |
| header->sizeInBytes = image_size; |
| |
| alpha_header->hotspotX = hotspotX; |
| alpha_header->hotspotY = hotspotY; |
| alpha_header->width = width; |
| alpha_header->height = height; |
| |
| memcpy(header + 1, image, image_size); |
| vmw_write(dev_priv, SVGA_REG_CURSOR_MOBID, |
| vps->cursor.bo->resource->start); |
| } |
| |
| |
| static u32 vmw_du_cursor_mob_size(u32 w, u32 h) |
| { |
| return w * h * sizeof(u32) + sizeof(SVGAGBCursorHeader); |
| } |
| |
| /** |
| * vmw_du_cursor_plane_acquire_image -- Acquire the image data |
| * @vps: cursor plane state |
| */ |
| static u32 *vmw_du_cursor_plane_acquire_image(struct vmw_plane_state *vps) |
| { |
| bool dummy; |
| if (vps->surf) { |
| if (vps->surf_mapped) |
| return vmw_bo_map_and_cache(vps->surf->res.backup); |
| return vps->surf->snooper.image; |
| } else if (vps->bo) |
| return ttm_kmap_obj_virtual(&vps->bo->map, &dummy); |
| return NULL; |
| } |
| |
| static bool vmw_du_cursor_plane_has_changed(struct vmw_plane_state *old_vps, |
| struct vmw_plane_state *new_vps) |
| { |
| void *old_image; |
| void *new_image; |
| u32 size; |
| bool changed; |
| |
| if (old_vps->base.crtc_w != new_vps->base.crtc_w || |
| old_vps->base.crtc_h != new_vps->base.crtc_h) |
| return true; |
| |
| if (old_vps->cursor.hotspot_x != new_vps->cursor.hotspot_x || |
| old_vps->cursor.hotspot_y != new_vps->cursor.hotspot_y) |
| return true; |
| |
| size = new_vps->base.crtc_w * new_vps->base.crtc_h * sizeof(u32); |
| |
| old_image = vmw_du_cursor_plane_acquire_image(old_vps); |
| new_image = vmw_du_cursor_plane_acquire_image(new_vps); |
| |
| changed = false; |
| if (old_image && new_image) |
| changed = memcmp(old_image, new_image, size) != 0; |
| |
| return changed; |
| } |
| |
| static void vmw_du_destroy_cursor_mob(struct ttm_buffer_object **bo) |
| { |
| if (!(*bo)) |
| return; |
| |
| ttm_bo_unpin(*bo); |
| ttm_bo_put(*bo); |
| kfree(*bo); |
| *bo = NULL; |
| } |
| |
| static void vmw_du_put_cursor_mob(struct vmw_cursor_plane *vcp, |
| struct vmw_plane_state *vps) |
| { |
| u32 i; |
| |
| if (!vps->cursor.bo) |
| return; |
| |
| vmw_du_cursor_plane_unmap_cm(vps); |
| |
| /* Look for a free slot to return this mob to the cache. */ |
| for (i = 0; i < ARRAY_SIZE(vcp->cursor_mobs); i++) { |
| if (!vcp->cursor_mobs[i]) { |
| vcp->cursor_mobs[i] = vps->cursor.bo; |
| vps->cursor.bo = NULL; |
| return; |
| } |
| } |
| |
| /* Cache is full: See if this mob is bigger than an existing mob. */ |
| for (i = 0; i < ARRAY_SIZE(vcp->cursor_mobs); i++) { |
| if (vcp->cursor_mobs[i]->base.size < |
| vps->cursor.bo->base.size) { |
| vmw_du_destroy_cursor_mob(&vcp->cursor_mobs[i]); |
| vcp->cursor_mobs[i] = vps->cursor.bo; |
| vps->cursor.bo = NULL; |
| return; |
| } |
| } |
| |
| /* Destroy it if it's not worth caching. */ |
| vmw_du_destroy_cursor_mob(&vps->cursor.bo); |
| } |
| |
| static int vmw_du_get_cursor_mob(struct vmw_cursor_plane *vcp, |
| struct vmw_plane_state *vps) |
| { |
| struct vmw_private *dev_priv = vcp->base.dev->dev_private; |
| u32 size = vmw_du_cursor_mob_size(vps->base.crtc_w, vps->base.crtc_h); |
| u32 i; |
| u32 cursor_max_dim, mob_max_size; |
| int ret; |
| |
| if (!dev_priv->has_mob || |
| (dev_priv->capabilities2 & SVGA_CAP2_CURSOR_MOB) == 0) |
| return -EINVAL; |
| |
| mob_max_size = vmw_read(dev_priv, SVGA_REG_MOB_MAX_SIZE); |
| cursor_max_dim = vmw_read(dev_priv, SVGA_REG_CURSOR_MAX_DIMENSION); |
| |
| if (size > mob_max_size || vps->base.crtc_w > cursor_max_dim || |
| vps->base.crtc_h > cursor_max_dim) |
| return -EINVAL; |
| |
| if (vps->cursor.bo) { |
| if (vps->cursor.bo->base.size >= size) |
| return 0; |
| vmw_du_put_cursor_mob(vcp, vps); |
| } |
| |
| /* Look for an unused mob in the cache. */ |
| for (i = 0; i < ARRAY_SIZE(vcp->cursor_mobs); i++) { |
| if (vcp->cursor_mobs[i] && |
| vcp->cursor_mobs[i]->base.size >= size) { |
| vps->cursor.bo = vcp->cursor_mobs[i]; |
| vcp->cursor_mobs[i] = NULL; |
| return 0; |
| } |
| } |
| /* Create a new mob if we can't find an existing one. */ |
| ret = vmw_bo_create_kernel(dev_priv, size, &vmw_mob_placement, |
| &vps->cursor.bo); |
| |
| if (ret != 0) |
| return ret; |
| |
| /* Fence the mob creation so we are guarateed to have the mob */ |
| ret = ttm_bo_reserve(vps->cursor.bo, false, false, NULL); |
| if (ret != 0) |
| goto teardown; |
| |
| vmw_bo_fence_single(vps->cursor.bo, NULL); |
| ttm_bo_unreserve(vps->cursor.bo); |
| return 0; |
| |
| teardown: |
| vmw_du_destroy_cursor_mob(&vps->cursor.bo); |
| return ret; |
| } |
| |
| |
| static void vmw_cursor_update_position(struct vmw_private *dev_priv, |
| bool show, int x, int y) |
| { |
| const uint32_t svga_cursor_on = show ? SVGA_CURSOR_ON_SHOW |
| : SVGA_CURSOR_ON_HIDE; |
| uint32_t count; |
| |
| spin_lock(&dev_priv->cursor_lock); |
| if (dev_priv->capabilities2 & SVGA_CAP2_EXTRA_REGS) { |
| vmw_write(dev_priv, SVGA_REG_CURSOR4_X, x); |
| vmw_write(dev_priv, SVGA_REG_CURSOR4_Y, y); |
| vmw_write(dev_priv, SVGA_REG_CURSOR4_SCREEN_ID, SVGA3D_INVALID_ID); |
| vmw_write(dev_priv, SVGA_REG_CURSOR4_ON, svga_cursor_on); |
| vmw_write(dev_priv, SVGA_REG_CURSOR4_SUBMIT, 1); |
| } else if (vmw_is_cursor_bypass3_enabled(dev_priv)) { |
| vmw_fifo_mem_write(dev_priv, SVGA_FIFO_CURSOR_ON, svga_cursor_on); |
| vmw_fifo_mem_write(dev_priv, SVGA_FIFO_CURSOR_X, x); |
| vmw_fifo_mem_write(dev_priv, SVGA_FIFO_CURSOR_Y, y); |
| count = vmw_fifo_mem_read(dev_priv, SVGA_FIFO_CURSOR_COUNT); |
| vmw_fifo_mem_write(dev_priv, SVGA_FIFO_CURSOR_COUNT, ++count); |
| } else { |
| vmw_write(dev_priv, SVGA_REG_CURSOR_X, x); |
| vmw_write(dev_priv, SVGA_REG_CURSOR_Y, y); |
| vmw_write(dev_priv, SVGA_REG_CURSOR_ON, svga_cursor_on); |
| } |
| spin_unlock(&dev_priv->cursor_lock); |
| } |
| |
| void vmw_kms_cursor_snoop(struct vmw_surface *srf, |
| struct ttm_object_file *tfile, |
| struct ttm_buffer_object *bo, |
| SVGA3dCmdHeader *header) |
| { |
| struct ttm_bo_kmap_obj map; |
| unsigned long kmap_offset; |
| unsigned long kmap_num; |
| SVGA3dCopyBox *box; |
| unsigned box_count; |
| void *virtual; |
| bool dummy; |
| struct vmw_dma_cmd { |
| SVGA3dCmdHeader header; |
| SVGA3dCmdSurfaceDMA dma; |
| } *cmd; |
| int i, ret; |
| const struct SVGA3dSurfaceDesc *desc = |
| vmw_surface_get_desc(VMW_CURSOR_SNOOP_FORMAT); |
| const u32 image_pitch = VMW_CURSOR_SNOOP_WIDTH * desc->pitchBytesPerBlock; |
| |
| cmd = container_of(header, struct vmw_dma_cmd, header); |
| |
| /* No snooper installed, nothing to copy */ |
| if (!srf->snooper.image) |
| return; |
| |
| if (cmd->dma.host.face != 0 || cmd->dma.host.mipmap != 0) { |
| DRM_ERROR("face and mipmap for cursors should never != 0\n"); |
| return; |
| } |
| |
| if (cmd->header.size < 64) { |
| DRM_ERROR("at least one full copy box must be given\n"); |
| return; |
| } |
| |
| box = (SVGA3dCopyBox *)&cmd[1]; |
| box_count = (cmd->header.size - sizeof(SVGA3dCmdSurfaceDMA)) / |
| sizeof(SVGA3dCopyBox); |
| |
| if (cmd->dma.guest.ptr.offset % PAGE_SIZE || |
| box->x != 0 || box->y != 0 || box->z != 0 || |
| box->srcx != 0 || box->srcy != 0 || box->srcz != 0 || |
| box->d != 1 || box_count != 1 || |
| box->w > VMW_CURSOR_SNOOP_WIDTH || box->h > VMW_CURSOR_SNOOP_HEIGHT) { |
| /* TODO handle none page aligned offsets */ |
| /* TODO handle more dst & src != 0 */ |
| /* TODO handle more then one copy */ |
| DRM_ERROR("Can't snoop dma request for cursor!\n"); |
| DRM_ERROR("(%u, %u, %u) (%u, %u, %u) (%ux%ux%u) %u %u\n", |
| box->srcx, box->srcy, box->srcz, |
| box->x, box->y, box->z, |
| box->w, box->h, box->d, box_count, |
| cmd->dma.guest.ptr.offset); |
| return; |
| } |
| |
| kmap_offset = cmd->dma.guest.ptr.offset >> PAGE_SHIFT; |
| kmap_num = (VMW_CURSOR_SNOOP_HEIGHT*image_pitch) >> PAGE_SHIFT; |
| |
| ret = ttm_bo_reserve(bo, true, false, NULL); |
| if (unlikely(ret != 0)) { |
| DRM_ERROR("reserve failed\n"); |
| return; |
| } |
| |
| ret = ttm_bo_kmap(bo, kmap_offset, kmap_num, &map); |
| if (unlikely(ret != 0)) |
| goto err_unreserve; |
| |
| virtual = ttm_kmap_obj_virtual(&map, &dummy); |
| |
| if (box->w == VMW_CURSOR_SNOOP_WIDTH && cmd->dma.guest.pitch == image_pitch) { |
| memcpy(srf->snooper.image, virtual, |
| VMW_CURSOR_SNOOP_HEIGHT*image_pitch); |
| } else { |
| /* Image is unsigned pointer. */ |
| for (i = 0; i < box->h; i++) |
| memcpy(srf->snooper.image + i * image_pitch, |
| virtual + i * cmd->dma.guest.pitch, |
| box->w * desc->pitchBytesPerBlock); |
| } |
| |
| srf->snooper.age++; |
| |
| ttm_bo_kunmap(&map); |
| err_unreserve: |
| ttm_bo_unreserve(bo); |
| } |
| |
| /** |
| * vmw_kms_legacy_hotspot_clear - Clear legacy hotspots |
| * |
| * @dev_priv: Pointer to the device private struct. |
| * |
| * Clears all legacy hotspots. |
| */ |
| void vmw_kms_legacy_hotspot_clear(struct vmw_private *dev_priv) |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| struct vmw_display_unit *du; |
| struct drm_crtc *crtc; |
| |
| drm_modeset_lock_all(dev); |
| drm_for_each_crtc(crtc, dev) { |
| du = vmw_crtc_to_du(crtc); |
| |
| du->hotspot_x = 0; |
| du->hotspot_y = 0; |
| } |
| drm_modeset_unlock_all(dev); |
| } |
| |
| void vmw_kms_cursor_post_execbuf(struct vmw_private *dev_priv) |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| struct vmw_display_unit *du; |
| struct drm_crtc *crtc; |
| |
| mutex_lock(&dev->mode_config.mutex); |
| |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| du = vmw_crtc_to_du(crtc); |
| if (!du->cursor_surface || |
| du->cursor_age == du->cursor_surface->snooper.age || |
| !du->cursor_surface->snooper.image) |
| continue; |
| |
| du->cursor_age = du->cursor_surface->snooper.age; |
| vmw_send_define_cursor_cmd(dev_priv, |
| du->cursor_surface->snooper.image, |
| VMW_CURSOR_SNOOP_WIDTH, |
| VMW_CURSOR_SNOOP_HEIGHT, |
| du->hotspot_x + du->core_hotspot_x, |
| du->hotspot_y + du->core_hotspot_y); |
| } |
| |
| mutex_unlock(&dev->mode_config.mutex); |
| } |
| |
| |
| void vmw_du_cursor_plane_destroy(struct drm_plane *plane) |
| { |
| struct vmw_cursor_plane *vcp = vmw_plane_to_vcp(plane); |
| u32 i; |
| |
| vmw_cursor_update_position(plane->dev->dev_private, false, 0, 0); |
| |
| for (i = 0; i < ARRAY_SIZE(vcp->cursor_mobs); i++) |
| vmw_du_destroy_cursor_mob(&vcp->cursor_mobs[i]); |
| |
| drm_plane_cleanup(plane); |
| } |
| |
| |
| void vmw_du_primary_plane_destroy(struct drm_plane *plane) |
| { |
| drm_plane_cleanup(plane); |
| |
| /* Planes are static in our case so we don't free it */ |
| } |
| |
| |
| /** |
| * vmw_du_plane_unpin_surf - unpins resource associated with a framebuffer surface |
| * |
| * @vps: plane state associated with the display surface |
| * @unreference: true if we also want to unreference the display. |
| */ |
| void vmw_du_plane_unpin_surf(struct vmw_plane_state *vps, |
| bool unreference) |
| { |
| if (vps->surf) { |
| if (vps->pinned) { |
| vmw_resource_unpin(&vps->surf->res); |
| vps->pinned--; |
| } |
| |
| if (unreference) { |
| if (vps->pinned) |
| DRM_ERROR("Surface still pinned\n"); |
| vmw_surface_unreference(&vps->surf); |
| } |
| } |
| } |
| |
| |
| /** |
| * vmw_du_plane_cleanup_fb - Unpins the plane surface |
| * |
| * @plane: display plane |
| * @old_state: Contains the FB to clean up |
| * |
| * Unpins the framebuffer surface |
| * |
| * Returns 0 on success |
| */ |
| void |
| vmw_du_plane_cleanup_fb(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct vmw_plane_state *vps = vmw_plane_state_to_vps(old_state); |
| |
| vmw_du_plane_unpin_surf(vps, false); |
| } |
| |
| |
| /** |
| * vmw_du_cursor_plane_map_cm - Maps the cursor mobs. |
| * |
| * @vps: plane_state |
| * |
| * Returns 0 on success |
| */ |
| |
| static int |
| vmw_du_cursor_plane_map_cm(struct vmw_plane_state *vps) |
| { |
| int ret; |
| u32 size = vmw_du_cursor_mob_size(vps->base.crtc_w, vps->base.crtc_h); |
| struct ttm_buffer_object *bo = vps->cursor.bo; |
| |
| if (!bo) |
| return -EINVAL; |
| |
| if (bo->base.size < size) |
| return -EINVAL; |
| |
| if (vps->cursor.mapped) |
| return 0; |
| |
| ret = ttm_bo_reserve(bo, false, false, NULL); |
| |
| if (unlikely(ret != 0)) |
| return -ENOMEM; |
| |
| ret = ttm_bo_kmap(bo, 0, PFN_UP(size), &vps->cursor.map); |
| |
| /* |
| * We just want to try to get mob bind to finish |
| * so that the first write to SVGA_REG_CURSOR_MOBID |
| * is done with a buffer that the device has already |
| * seen |
| */ |
| (void) ttm_bo_wait(bo, false, false); |
| |
| ttm_bo_unreserve(bo); |
| |
| if (unlikely(ret != 0)) |
| return -ENOMEM; |
| |
| vps->cursor.mapped = true; |
| |
| return 0; |
| } |
| |
| |
| /** |
| * vmw_du_cursor_plane_unmap_cm - Unmaps the cursor mobs. |
| * |
| * @vps: state of the cursor plane |
| * |
| * Returns 0 on success |
| */ |
| |
| static int |
| vmw_du_cursor_plane_unmap_cm(struct vmw_plane_state *vps) |
| { |
| int ret = 0; |
| struct ttm_buffer_object *bo = vps->cursor.bo; |
| |
| if (!vps->cursor.mapped) |
| return 0; |
| |
| if (!bo) |
| return 0; |
| |
| ret = ttm_bo_reserve(bo, true, false, NULL); |
| if (likely(ret == 0)) { |
| ttm_bo_kunmap(&vps->cursor.map); |
| ttm_bo_unreserve(bo); |
| vps->cursor.mapped = false; |
| } |
| |
| return ret; |
| } |
| |
| |
| /** |
| * vmw_du_cursor_plane_cleanup_fb - Unpins the plane surface |
| * |
| * @plane: cursor plane |
| * @old_state: contains the state to clean up |
| * |
| * Unmaps all cursor bo mappings and unpins the cursor surface |
| * |
| * Returns 0 on success |
| */ |
| void |
| vmw_du_cursor_plane_cleanup_fb(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct vmw_cursor_plane *vcp = vmw_plane_to_vcp(plane); |
| struct vmw_plane_state *vps = vmw_plane_state_to_vps(old_state); |
| bool dummy; |
| |
| if (vps->surf_mapped) { |
| vmw_bo_unmap(vps->surf->res.backup); |
| vps->surf_mapped = false; |
| } |
| |
| if (vps->bo && ttm_kmap_obj_virtual(&vps->bo->map, &dummy)) { |
| const int ret = ttm_bo_reserve(&vps->bo->base, true, false, NULL); |
| |
| if (likely(ret == 0)) { |
| if (atomic_read(&vps->bo->base_mapped_count) == 0) |
| ttm_bo_kunmap(&vps->bo->map); |
| ttm_bo_unreserve(&vps->bo->base); |
| } |
| } |
| |
| vmw_du_cursor_plane_unmap_cm(vps); |
| vmw_du_put_cursor_mob(vcp, vps); |
| |
| vmw_du_plane_unpin_surf(vps, false); |
| |
| if (vps->surf) { |
| vmw_surface_unreference(&vps->surf); |
| vps->surf = NULL; |
| } |
| |
| if (vps->bo) { |
| vmw_bo_unreference(&vps->bo); |
| vps->bo = NULL; |
| } |
| } |
| |
| |
| /** |
| * vmw_du_cursor_plane_prepare_fb - Readies the cursor by referencing it |
| * |
| * @plane: display plane |
| * @new_state: info on the new plane state, including the FB |
| * |
| * Returns 0 on success |
| */ |
| int |
| vmw_du_cursor_plane_prepare_fb(struct drm_plane *plane, |
| struct drm_plane_state *new_state) |
| { |
| struct drm_framebuffer *fb = new_state->fb; |
| struct vmw_cursor_plane *vcp = vmw_plane_to_vcp(plane); |
| struct vmw_plane_state *vps = vmw_plane_state_to_vps(new_state); |
| int ret = 0; |
| |
| if (vps->surf) { |
| vmw_surface_unreference(&vps->surf); |
| vps->surf = NULL; |
| } |
| |
| if (vps->bo) { |
| vmw_bo_unreference(&vps->bo); |
| vps->bo = NULL; |
| } |
| |
| if (fb) { |
| if (vmw_framebuffer_to_vfb(fb)->bo) { |
| vps->bo = vmw_framebuffer_to_vfbd(fb)->buffer; |
| vmw_bo_reference(vps->bo); |
| } else { |
| vps->surf = vmw_framebuffer_to_vfbs(fb)->surface; |
| vmw_surface_reference(vps->surf); |
| } |
| } |
| |
| if (!vps->surf && vps->bo) { |
| const u32 size = new_state->crtc_w * new_state->crtc_h * sizeof(u32); |
| |
| /* |
| * Not using vmw_bo_map_and_cache() helper here as we need to |
| * reserve the ttm_buffer_object first which |
| * vmw_bo_map_and_cache() omits. |
| */ |
| ret = ttm_bo_reserve(&vps->bo->base, true, false, NULL); |
| |
| if (unlikely(ret != 0)) |
| return -ENOMEM; |
| |
| ret = ttm_bo_kmap(&vps->bo->base, 0, PFN_UP(size), &vps->bo->map); |
| |
| if (likely(ret == 0)) |
| atomic_inc(&vps->bo->base_mapped_count); |
| |
| ttm_bo_unreserve(&vps->bo->base); |
| |
| if (unlikely(ret != 0)) |
| return -ENOMEM; |
| } else if (vps->surf && !vps->bo && vps->surf->res.backup) { |
| |
| WARN_ON(vps->surf->snooper.image); |
| ret = ttm_bo_reserve(&vps->surf->res.backup->base, true, false, |
| NULL); |
| if (unlikely(ret != 0)) |
| return -ENOMEM; |
| vmw_bo_map_and_cache(vps->surf->res.backup); |
| ttm_bo_unreserve(&vps->surf->res.backup->base); |
| vps->surf_mapped = true; |
| } |
| |
| if (vps->surf || vps->bo) { |
| vmw_du_get_cursor_mob(vcp, vps); |
| vmw_du_cursor_plane_map_cm(vps); |
| } |
| |
| return 0; |
| } |
| |
| |
| void |
| vmw_du_cursor_plane_atomic_update(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, |
| plane); |
| struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, |
| plane); |
| struct drm_crtc *crtc = new_state->crtc ?: old_state->crtc; |
| struct vmw_private *dev_priv = vmw_priv(crtc->dev); |
| struct vmw_display_unit *du = vmw_crtc_to_du(crtc); |
| struct vmw_plane_state *vps = vmw_plane_state_to_vps(new_state); |
| struct vmw_plane_state *old_vps = vmw_plane_state_to_vps(old_state); |
| s32 hotspot_x, hotspot_y; |
| bool dummy; |
| |
| hotspot_x = du->hotspot_x; |
| hotspot_y = du->hotspot_y; |
| |
| if (new_state->fb) { |
| hotspot_x += new_state->fb->hot_x; |
| hotspot_y += new_state->fb->hot_y; |
| } |
| |
| du->cursor_surface = vps->surf; |
| du->cursor_bo = vps->bo; |
| |
| if (!vps->surf && !vps->bo) { |
| vmw_cursor_update_position(dev_priv, false, 0, 0); |
| return; |
| } |
| |
| vps->cursor.hotspot_x = hotspot_x; |
| vps->cursor.hotspot_y = hotspot_y; |
| |
| if (vps->surf) { |
| du->cursor_age = du->cursor_surface->snooper.age; |
| } |
| |
| if (!vmw_du_cursor_plane_has_changed(old_vps, vps)) { |
| /* |
| * If it hasn't changed, avoid making the device do extra |
| * work by keeping the old cursor active. |
| */ |
| struct vmw_cursor_plane_state tmp = old_vps->cursor; |
| old_vps->cursor = vps->cursor; |
| vps->cursor = tmp; |
| } else { |
| void *image = vmw_du_cursor_plane_acquire_image(vps); |
| if (image) |
| vmw_cursor_update_image(dev_priv, vps, image, |
| new_state->crtc_w, |
| new_state->crtc_h, |
| hotspot_x, hotspot_y); |
| } |
| |
| if (vps->bo) { |
| if (ttm_kmap_obj_virtual(&vps->bo->map, &dummy)) |
| atomic_dec(&vps->bo->base_mapped_count); |
| } |
| |
| du->cursor_x = new_state->crtc_x + du->set_gui_x; |
| du->cursor_y = new_state->crtc_y + du->set_gui_y; |
| |
| vmw_cursor_update_position(dev_priv, true, |
| du->cursor_x + hotspot_x, |
| du->cursor_y + hotspot_y); |
| |
| du->core_hotspot_x = hotspot_x - du->hotspot_x; |
| du->core_hotspot_y = hotspot_y - du->hotspot_y; |
| } |
| |
| |
| /** |
| * vmw_du_primary_plane_atomic_check - check if the new state is okay |
| * |
| * @plane: display plane |
| * @state: info on the new plane state, including the FB |
| * |
| * Check if the new state is settable given the current state. Other |
| * than what the atomic helper checks, we care about crtc fitting |
| * the FB and maintaining one active framebuffer. |
| * |
| * Returns 0 on success |
| */ |
| int vmw_du_primary_plane_atomic_check(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, |
| plane); |
| struct drm_crtc_state *crtc_state = NULL; |
| struct drm_framebuffer *new_fb = new_state->fb; |
| int ret; |
| |
| if (new_state->crtc) |
| crtc_state = drm_atomic_get_new_crtc_state(state, |
| new_state->crtc); |
| |
| ret = drm_atomic_helper_check_plane_state(new_state, crtc_state, |
| DRM_PLANE_NO_SCALING, |
| DRM_PLANE_NO_SCALING, |
| false, true); |
| |
| if (!ret && new_fb) { |
| struct drm_crtc *crtc = new_state->crtc; |
| struct vmw_display_unit *du = vmw_crtc_to_du(crtc); |
| |
| vmw_connector_state_to_vcs(du->connector.state); |
| } |
| |
| |
| return ret; |
| } |
| |
| |
| /** |
| * vmw_du_cursor_plane_atomic_check - check if the new state is okay |
| * |
| * @plane: cursor plane |
| * @state: info on the new plane state |
| * |
| * This is a chance to fail if the new cursor state does not fit |
| * our requirements. |
| * |
| * Returns 0 on success |
| */ |
| int vmw_du_cursor_plane_atomic_check(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, |
| plane); |
| int ret = 0; |
| struct drm_crtc_state *crtc_state = NULL; |
| struct vmw_surface *surface = NULL; |
| struct drm_framebuffer *fb = new_state->fb; |
| |
| if (new_state->crtc) |
| crtc_state = drm_atomic_get_new_crtc_state(new_state->state, |
| new_state->crtc); |
| |
| ret = drm_atomic_helper_check_plane_state(new_state, crtc_state, |
| DRM_PLANE_NO_SCALING, |
| DRM_PLANE_NO_SCALING, |
| true, true); |
| if (ret) |
| return ret; |
| |
| /* Turning off */ |
| if (!fb) |
| return 0; |
| |
| /* A lot of the code assumes this */ |
| if (new_state->crtc_w != 64 || new_state->crtc_h != 64) { |
| DRM_ERROR("Invalid cursor dimensions (%d, %d)\n", |
| new_state->crtc_w, new_state->crtc_h); |
| return -EINVAL; |
| } |
| |
| if (!vmw_framebuffer_to_vfb(fb)->bo) { |
| surface = vmw_framebuffer_to_vfbs(fb)->surface; |
| |
| WARN_ON(!surface); |
| |
| if (!surface || |
| (!surface->snooper.image && !surface->res.backup)) { |
| DRM_ERROR("surface not suitable for cursor\n"); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, |
| struct drm_atomic_state *state) |
| { |
| struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, |
| crtc); |
| struct vmw_display_unit *du = vmw_crtc_to_du(new_state->crtc); |
| int connector_mask = drm_connector_mask(&du->connector); |
| bool has_primary = new_state->plane_mask & |
| drm_plane_mask(crtc->primary); |
| |
| /* We always want to have an active plane with an active CRTC */ |
| if (has_primary != new_state->enable) |
| return -EINVAL; |
| |
| |
| if (new_state->connector_mask != connector_mask && |
| new_state->connector_mask != 0) { |
| DRM_ERROR("Invalid connectors configuration\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Our virtual device does not have a dot clock, so use the logical |
| * clock value as the dot clock. |
| */ |
| if (new_state->mode.crtc_clock == 0) |
| new_state->adjusted_mode.crtc_clock = new_state->mode.clock; |
| |
| return 0; |
| } |
| |
| |
| void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc, |
| struct drm_atomic_state *state) |
| { |
| } |
| |
| |
| void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc, |
| struct drm_atomic_state *state) |
| { |
| } |
| |
| |
| /** |
| * vmw_du_crtc_duplicate_state - duplicate crtc state |
| * @crtc: DRM crtc |
| * |
| * Allocates and returns a copy of the crtc state (both common and |
| * vmw-specific) for the specified crtc. |
| * |
| * Returns: The newly allocated crtc state, or NULL on failure. |
| */ |
| struct drm_crtc_state * |
| vmw_du_crtc_duplicate_state(struct drm_crtc *crtc) |
| { |
| struct drm_crtc_state *state; |
| struct vmw_crtc_state *vcs; |
| |
| if (WARN_ON(!crtc->state)) |
| return NULL; |
| |
| vcs = kmemdup(crtc->state, sizeof(*vcs), GFP_KERNEL); |
| |
| if (!vcs) |
| return NULL; |
| |
| state = &vcs->base; |
| |
| __drm_atomic_helper_crtc_duplicate_state(crtc, state); |
| |
| return state; |
| } |
| |
| |
| /** |
| * vmw_du_crtc_reset - creates a blank vmw crtc state |
| * @crtc: DRM crtc |
| * |
| * Resets the atomic state for @crtc by freeing the state pointer (which |
| * might be NULL, e.g. at driver load time) and allocating a new empty state |
| * object. |
| */ |
| void vmw_du_crtc_reset(struct drm_crtc *crtc) |
| { |
| struct vmw_crtc_state *vcs; |
| |
| |
| if (crtc->state) { |
| __drm_atomic_helper_crtc_destroy_state(crtc->state); |
| |
| kfree(vmw_crtc_state_to_vcs(crtc->state)); |
| } |
| |
| vcs = kzalloc(sizeof(*vcs), GFP_KERNEL); |
| |
| if (!vcs) { |
| DRM_ERROR("Cannot allocate vmw_crtc_state\n"); |
| return; |
| } |
| |
| __drm_atomic_helper_crtc_reset(crtc, &vcs->base); |
| } |
| |
| |
| /** |
| * vmw_du_crtc_destroy_state - destroy crtc state |
| * @crtc: DRM crtc |
| * @state: state object to destroy |
| * |
| * Destroys the crtc state (both common and vmw-specific) for the |
| * specified plane. |
| */ |
| void |
| vmw_du_crtc_destroy_state(struct drm_crtc *crtc, |
| struct drm_crtc_state *state) |
| { |
| drm_atomic_helper_crtc_destroy_state(crtc, state); |
| } |
| |
| |
| /** |
| * vmw_du_plane_duplicate_state - duplicate plane state |
| * @plane: drm plane |
| * |
| * Allocates and returns a copy of the plane state (both common and |
| * vmw-specific) for the specified plane. |
| * |
| * Returns: The newly allocated plane state, or NULL on failure. |
| */ |
| struct drm_plane_state * |
| vmw_du_plane_duplicate_state(struct drm_plane *plane) |
| { |
| struct drm_plane_state *state; |
| struct vmw_plane_state *vps; |
| |
| vps = kmemdup(plane->state, sizeof(*vps), GFP_KERNEL); |
| |
| if (!vps) |
| return NULL; |
| |
| vps->pinned = 0; |
| vps->cpp = 0; |
| |
| memset(&vps->cursor, 0, sizeof(vps->cursor)); |
| |
| /* Each ref counted resource needs to be acquired again */ |
| if (vps->surf) |
| (void) vmw_surface_reference(vps->surf); |
| |
| if (vps->bo) |
| (void) vmw_bo_reference(vps->bo); |
| |
| state = &vps->base; |
| |
| __drm_atomic_helper_plane_duplicate_state(plane, state); |
| |
| return state; |
| } |
| |
| |
| /** |
| * vmw_du_plane_reset - creates a blank vmw plane state |
| * @plane: drm plane |
| * |
| * Resets the atomic state for @plane by freeing the state pointer (which might |
| * be NULL, e.g. at driver load time) and allocating a new empty state object. |
| */ |
| void vmw_du_plane_reset(struct drm_plane *plane) |
| { |
| struct vmw_plane_state *vps; |
| |
| if (plane->state) |
| vmw_du_plane_destroy_state(plane, plane->state); |
| |
| vps = kzalloc(sizeof(*vps), GFP_KERNEL); |
| |
| if (!vps) { |
| DRM_ERROR("Cannot allocate vmw_plane_state\n"); |
| return; |
| } |
| |
| __drm_atomic_helper_plane_reset(plane, &vps->base); |
| } |
| |
| |
| /** |
| * vmw_du_plane_destroy_state - destroy plane state |
| * @plane: DRM plane |
| * @state: state object to destroy |
| * |
| * Destroys the plane state (both common and vmw-specific) for the |
| * specified plane. |
| */ |
| void |
| vmw_du_plane_destroy_state(struct drm_plane *plane, |
| struct drm_plane_state *state) |
| { |
| struct vmw_plane_state *vps = vmw_plane_state_to_vps(state); |
| |
| /* Should have been freed by cleanup_fb */ |
| if (vps->surf) |
| vmw_surface_unreference(&vps->surf); |
| |
| if (vps->bo) |
| vmw_bo_unreference(&vps->bo); |
| |
| drm_atomic_helper_plane_destroy_state(plane, state); |
| } |
| |
| |
| /** |
| * vmw_du_connector_duplicate_state - duplicate connector state |
| * @connector: DRM connector |
| * |
| * Allocates and returns a copy of the connector state (both common and |
| * vmw-specific) for the specified connector. |
| * |
| * Returns: The newly allocated connector state, or NULL on failure. |
| */ |
| struct drm_connector_state * |
| vmw_du_connector_duplicate_state(struct drm_connector *connector) |
| { |
| struct drm_connector_state *state; |
| struct vmw_connector_state *vcs; |
| |
| if (WARN_ON(!connector->state)) |
| return NULL; |
| |
| vcs = kmemdup(connector->state, sizeof(*vcs), GFP_KERNEL); |
| |
| if (!vcs) |
| return NULL; |
| |
| state = &vcs->base; |
| |
| __drm_atomic_helper_connector_duplicate_state(connector, state); |
| |
| return state; |
| } |
| |
| |
| /** |
| * vmw_du_connector_reset - creates a blank vmw connector state |
| * @connector: DRM connector |
| * |
| * Resets the atomic state for @connector by freeing the state pointer (which |
| * might be NULL, e.g. at driver load time) and allocating a new empty state |
| * object. |
| */ |
| void vmw_du_connector_reset(struct drm_connector *connector) |
| { |
| struct vmw_connector_state *vcs; |
| |
| |
| if (connector->state) { |
| __drm_atomic_helper_connector_destroy_state(connector->state); |
| |
| kfree(vmw_connector_state_to_vcs(connector->state)); |
| } |
| |
| vcs = kzalloc(sizeof(*vcs), GFP_KERNEL); |
| |
| if (!vcs) { |
| DRM_ERROR("Cannot allocate vmw_connector_state\n"); |
| return; |
| } |
| |
| __drm_atomic_helper_connector_reset(connector, &vcs->base); |
| } |
| |
| |
| /** |
| * vmw_du_connector_destroy_state - destroy connector state |
| * @connector: DRM connector |
| * @state: state object to destroy |
| * |
| * Destroys the connector state (both common and vmw-specific) for the |
| * specified plane. |
| */ |
| void |
| vmw_du_connector_destroy_state(struct drm_connector *connector, |
| struct drm_connector_state *state) |
| { |
| drm_atomic_helper_connector_destroy_state(connector, state); |
| } |
| /* |
| * Generic framebuffer code |
| */ |
| |
| /* |
| * Surface framebuffer code |
| */ |
| |
| static void vmw_framebuffer_surface_destroy(struct drm_framebuffer *framebuffer) |
| { |
| struct vmw_framebuffer_surface *vfbs = |
| vmw_framebuffer_to_vfbs(framebuffer); |
| |
| drm_framebuffer_cleanup(framebuffer); |
| vmw_surface_unreference(&vfbs->surface); |
| |
| kfree(vfbs); |
| } |
| |
| /** |
| * vmw_kms_readback - Perform a readback from the screen system to |
| * a buffer-object backed framebuffer. |
| * |
| * @dev_priv: Pointer to the device private structure. |
| * @file_priv: Pointer to a struct drm_file identifying the caller. |
| * Must be set to NULL if @user_fence_rep is NULL. |
| * @vfb: Pointer to the buffer-object backed framebuffer. |
| * @user_fence_rep: User-space provided structure for fence information. |
| * Must be set to non-NULL if @file_priv is non-NULL. |
| * @vclips: Array of clip rects. |
| * @num_clips: Number of clip rects in @vclips. |
| * |
| * Returns 0 on success, negative error code on failure. -ERESTARTSYS if |
| * interrupted. |
| */ |
| int vmw_kms_readback(struct vmw_private *dev_priv, |
| struct drm_file *file_priv, |
| struct vmw_framebuffer *vfb, |
| struct drm_vmw_fence_rep __user *user_fence_rep, |
| struct drm_vmw_rect *vclips, |
| uint32_t num_clips) |
| { |
| switch (dev_priv->active_display_unit) { |
| case vmw_du_screen_object: |
| return vmw_kms_sou_readback(dev_priv, file_priv, vfb, |
| user_fence_rep, vclips, num_clips, |
| NULL); |
| case vmw_du_screen_target: |
| return vmw_kms_stdu_dma(dev_priv, file_priv, vfb, |
| user_fence_rep, NULL, vclips, num_clips, |
| 1, false, true, NULL); |
| default: |
| WARN_ONCE(true, |
| "Readback called with invalid display system.\n"); |
| } |
| |
| return -ENOSYS; |
| } |
| |
| |
| static const struct drm_framebuffer_funcs vmw_framebuffer_surface_funcs = { |
| .destroy = vmw_framebuffer_surface_destroy, |
| .dirty = drm_atomic_helper_dirtyfb, |
| }; |
| |
| static int vmw_kms_new_framebuffer_surface(struct vmw_private *dev_priv, |
| struct vmw_surface *surface, |
| struct vmw_framebuffer **out, |
| const struct drm_mode_fb_cmd2 |
| *mode_cmd, |
| bool is_bo_proxy) |
| |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| struct vmw_framebuffer_surface *vfbs; |
| enum SVGA3dSurfaceFormat format; |
| int ret; |
| |
| /* 3D is only supported on HWv8 and newer hosts */ |
| if (dev_priv->active_display_unit == vmw_du_legacy) |
| return -ENOSYS; |
| |
| /* |
| * Sanity checks. |
| */ |
| |
| if (!drm_any_plane_has_format(&dev_priv->drm, |
| mode_cmd->pixel_format, |
| mode_cmd->modifier[0])) { |
| drm_dbg(&dev_priv->drm, |
| "unsupported pixel format %p4cc / modifier 0x%llx\n", |
| &mode_cmd->pixel_format, mode_cmd->modifier[0]); |
| return -EINVAL; |
| } |
| |
| /* Surface must be marked as a scanout. */ |
| if (unlikely(!surface->metadata.scanout)) |
| return -EINVAL; |
| |
| if (unlikely(surface->metadata.mip_levels[0] != 1 || |
| surface->metadata.num_sizes != 1 || |
| surface->metadata.base_size.width < mode_cmd->width || |
| surface->metadata.base_size.height < mode_cmd->height || |
| surface->metadata.base_size.depth != 1)) { |
| DRM_ERROR("Incompatible surface dimensions " |
| "for requested mode.\n"); |
| return -EINVAL; |
| } |
| |
| switch (mode_cmd->pixel_format) { |
| case DRM_FORMAT_ARGB8888: |
| format = SVGA3D_A8R8G8B8; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| format = SVGA3D_X8R8G8B8; |
| break; |
| case DRM_FORMAT_RGB565: |
| format = SVGA3D_R5G6B5; |
| break; |
| case DRM_FORMAT_XRGB1555: |
| format = SVGA3D_A1R5G5B5; |
| break; |
| default: |
| DRM_ERROR("Invalid pixel format: %p4cc\n", |
| &mode_cmd->pixel_format); |
| return -EINVAL; |
| } |
| |
| /* |
| * For DX, surface format validation is done when surface->scanout |
| * is set. |
| */ |
| if (!has_sm4_context(dev_priv) && format != surface->metadata.format) { |
| DRM_ERROR("Invalid surface format for requested mode.\n"); |
| return -EINVAL; |
| } |
| |
| vfbs = kzalloc(sizeof(*vfbs), GFP_KERNEL); |
| if (!vfbs) { |
| ret = -ENOMEM; |
| goto out_err1; |
| } |
| |
| drm_helper_mode_fill_fb_struct(dev, &vfbs->base.base, mode_cmd); |
| vfbs->surface = vmw_surface_reference(surface); |
| vfbs->base.user_handle = mode_cmd->handles[0]; |
| vfbs->is_bo_proxy = is_bo_proxy; |
| |
| *out = &vfbs->base; |
| |
| ret = drm_framebuffer_init(dev, &vfbs->base.base, |
| &vmw_framebuffer_surface_funcs); |
| if (ret) |
| goto out_err2; |
| |
| return 0; |
| |
| out_err2: |
| vmw_surface_unreference(&surface); |
| kfree(vfbs); |
| out_err1: |
| return ret; |
| } |
| |
| /* |
| * Buffer-object framebuffer code |
| */ |
| |
| static int vmw_framebuffer_bo_create_handle(struct drm_framebuffer *fb, |
| struct drm_file *file_priv, |
| unsigned int *handle) |
| { |
| struct vmw_framebuffer_bo *vfbd = |
| vmw_framebuffer_to_vfbd(fb); |
| |
| return drm_gem_handle_create(file_priv, &vfbd->buffer->base.base, handle); |
| } |
| |
| static void vmw_framebuffer_bo_destroy(struct drm_framebuffer *framebuffer) |
| { |
| struct vmw_framebuffer_bo *vfbd = |
| vmw_framebuffer_to_vfbd(framebuffer); |
| |
| drm_framebuffer_cleanup(framebuffer); |
| vmw_bo_unreference(&vfbd->buffer); |
| |
| kfree(vfbd); |
| } |
| |
| static int vmw_framebuffer_bo_dirty(struct drm_framebuffer *framebuffer, |
| struct drm_file *file_priv, |
| unsigned int flags, unsigned int color, |
| struct drm_clip_rect *clips, |
| unsigned int num_clips) |
| { |
| struct vmw_private *dev_priv = vmw_priv(framebuffer->dev); |
| struct vmw_framebuffer_bo *vfbd = |
| vmw_framebuffer_to_vfbd(framebuffer); |
| struct drm_clip_rect norect; |
| int ret, increment = 1; |
| |
| drm_modeset_lock_all(&dev_priv->drm); |
| |
| if (!num_clips) { |
| num_clips = 1; |
| clips = &norect; |
| norect.x1 = norect.y1 = 0; |
| norect.x2 = framebuffer->width; |
| norect.y2 = framebuffer->height; |
| } else if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY) { |
| num_clips /= 2; |
| increment = 2; |
| } |
| |
| switch (dev_priv->active_display_unit) { |
| case vmw_du_legacy: |
| ret = vmw_kms_ldu_do_bo_dirty(dev_priv, &vfbd->base, 0, 0, |
| clips, num_clips, increment); |
| break; |
| default: |
| ret = -EINVAL; |
| WARN_ONCE(true, "Dirty called with invalid display system.\n"); |
| break; |
| } |
| |
| vmw_cmd_flush(dev_priv, false); |
| |
| drm_modeset_unlock_all(&dev_priv->drm); |
| |
| return ret; |
| } |
| |
| static int vmw_framebuffer_bo_dirty_ext(struct drm_framebuffer *framebuffer, |
| struct drm_file *file_priv, |
| unsigned int flags, unsigned int color, |
| struct drm_clip_rect *clips, |
| unsigned int num_clips) |
| { |
| struct vmw_private *dev_priv = vmw_priv(framebuffer->dev); |
| |
| if (dev_priv->active_display_unit == vmw_du_legacy && |
| vmw_cmd_supported(dev_priv)) |
| return vmw_framebuffer_bo_dirty(framebuffer, file_priv, flags, |
| color, clips, num_clips); |
| |
| return drm_atomic_helper_dirtyfb(framebuffer, file_priv, flags, color, |
| clips, num_clips); |
| } |
| |
| static const struct drm_framebuffer_funcs vmw_framebuffer_bo_funcs = { |
| .create_handle = vmw_framebuffer_bo_create_handle, |
| .destroy = vmw_framebuffer_bo_destroy, |
| .dirty = vmw_framebuffer_bo_dirty_ext, |
| }; |
| |
| /* |
| * Pin the bofer in a location suitable for access by the |
| * display system. |
| */ |
| static int vmw_framebuffer_pin(struct vmw_framebuffer *vfb) |
| { |
| struct vmw_private *dev_priv = vmw_priv(vfb->base.dev); |
| struct vmw_buffer_object *buf; |
| struct ttm_placement *placement; |
| int ret; |
| |
| buf = vfb->bo ? vmw_framebuffer_to_vfbd(&vfb->base)->buffer : |
| vmw_framebuffer_to_vfbs(&vfb->base)->surface->res.backup; |
| |
| if (!buf) |
| return 0; |
| |
| switch (dev_priv->active_display_unit) { |
| case vmw_du_legacy: |
| vmw_overlay_pause_all(dev_priv); |
| ret = vmw_bo_pin_in_start_of_vram(dev_priv, buf, false); |
| vmw_overlay_resume_all(dev_priv); |
| break; |
| case vmw_du_screen_object: |
| case vmw_du_screen_target: |
| if (vfb->bo) { |
| if (dev_priv->capabilities & SVGA_CAP_3D) { |
| /* |
| * Use surface DMA to get content to |
| * sreen target surface. |
| */ |
| placement = &vmw_vram_gmr_placement; |
| } else { |
| /* Use CPU blit. */ |
| placement = &vmw_sys_placement; |
| } |
| } else { |
| /* Use surface / image update */ |
| placement = &vmw_mob_placement; |
| } |
| |
| return vmw_bo_pin_in_placement(dev_priv, buf, placement, false); |
| default: |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int vmw_framebuffer_unpin(struct vmw_framebuffer *vfb) |
| { |
| struct vmw_private *dev_priv = vmw_priv(vfb->base.dev); |
| struct vmw_buffer_object *buf; |
| |
| buf = vfb->bo ? vmw_framebuffer_to_vfbd(&vfb->base)->buffer : |
| vmw_framebuffer_to_vfbs(&vfb->base)->surface->res.backup; |
| |
| if (WARN_ON(!buf)) |
| return 0; |
| |
| return vmw_bo_unpin(dev_priv, buf, false); |
| } |
| |
| /** |
| * vmw_create_bo_proxy - create a proxy surface for the buffer object |
| * |
| * @dev: DRM device |
| * @mode_cmd: parameters for the new surface |
| * @bo_mob: MOB backing the buffer object |
| * @srf_out: newly created surface |
| * |
| * When the content FB is a buffer object, we create a surface as a proxy to the |
| * same buffer. This way we can do a surface copy rather than a surface DMA. |
| * This is a more efficient approach |
| * |
| * RETURNS: |
| * 0 on success, error code otherwise |
| */ |
| static int vmw_create_bo_proxy(struct drm_device *dev, |
| const struct drm_mode_fb_cmd2 *mode_cmd, |
| struct vmw_buffer_object *bo_mob, |
| struct vmw_surface **srf_out) |
| { |
| struct vmw_surface_metadata metadata = {0}; |
| uint32_t format; |
| struct vmw_resource *res; |
| unsigned int bytes_pp; |
| int ret; |
| |
| switch (mode_cmd->pixel_format) { |
| case DRM_FORMAT_ARGB8888: |
| case DRM_FORMAT_XRGB8888: |
| format = SVGA3D_X8R8G8B8; |
| bytes_pp = 4; |
| break; |
| |
| case DRM_FORMAT_RGB565: |
| case DRM_FORMAT_XRGB1555: |
| format = SVGA3D_R5G6B5; |
| bytes_pp = 2; |
| break; |
| |
| case 8: |
| format = SVGA3D_P8; |
| bytes_pp = 1; |
| break; |
| |
| default: |
| DRM_ERROR("Invalid framebuffer format %p4cc\n", |
| &mode_cmd->pixel_format); |
| return -EINVAL; |
| } |
| |
| metadata.format = format; |
| metadata.mip_levels[0] = 1; |
| metadata.num_sizes = 1; |
| metadata.base_size.width = mode_cmd->pitches[0] / bytes_pp; |
| metadata.base_size.height = mode_cmd->height; |
| metadata.base_size.depth = 1; |
| metadata.scanout = true; |
| |
| ret = vmw_gb_surface_define(vmw_priv(dev), &metadata, srf_out); |
| if (ret) { |
| DRM_ERROR("Failed to allocate proxy content buffer\n"); |
| return ret; |
| } |
| |
| res = &(*srf_out)->res; |
| |
| /* Reserve and switch the backing mob. */ |
| mutex_lock(&res->dev_priv->cmdbuf_mutex); |
| (void) vmw_resource_reserve(res, false, true); |
| vmw_bo_unreference(&res->backup); |
| res->backup = vmw_bo_reference(bo_mob); |
| res->backup_offset = 0; |
| vmw_resource_unreserve(res, false, false, false, NULL, 0); |
| mutex_unlock(&res->dev_priv->cmdbuf_mutex); |
| |
| return 0; |
| } |
| |
| |
| |
| static int vmw_kms_new_framebuffer_bo(struct vmw_private *dev_priv, |
| struct vmw_buffer_object *bo, |
| struct vmw_framebuffer **out, |
| const struct drm_mode_fb_cmd2 |
| *mode_cmd) |
| |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| struct vmw_framebuffer_bo *vfbd; |
| unsigned int requested_size; |
| int ret; |
| |
| requested_size = mode_cmd->height * mode_cmd->pitches[0]; |
| if (unlikely(requested_size > bo->base.base.size)) { |
| DRM_ERROR("Screen buffer object size is too small " |
| "for requested mode.\n"); |
| return -EINVAL; |
| } |
| |
| if (!drm_any_plane_has_format(&dev_priv->drm, |
| mode_cmd->pixel_format, |
| mode_cmd->modifier[0])) { |
| drm_dbg(&dev_priv->drm, |
| "unsupported pixel format %p4cc / modifier 0x%llx\n", |
| &mode_cmd->pixel_format, mode_cmd->modifier[0]); |
| return -EINVAL; |
| } |
| |
| vfbd = kzalloc(sizeof(*vfbd), GFP_KERNEL); |
| if (!vfbd) { |
| ret = -ENOMEM; |
| goto out_err1; |
| } |
| |
| vfbd->base.base.obj[0] = &bo->base.base; |
| drm_helper_mode_fill_fb_struct(dev, &vfbd->base.base, mode_cmd); |
| vfbd->base.bo = true; |
| vfbd->buffer = vmw_bo_reference(bo); |
| vfbd->base.user_handle = mode_cmd->handles[0]; |
| *out = &vfbd->base; |
| |
| ret = drm_framebuffer_init(dev, &vfbd->base.base, |
| &vmw_framebuffer_bo_funcs); |
| if (ret) |
| goto out_err2; |
| |
| return 0; |
| |
| out_err2: |
| vmw_bo_unreference(&bo); |
| kfree(vfbd); |
| out_err1: |
| return ret; |
| } |
| |
| |
| /** |
| * vmw_kms_srf_ok - check if a surface can be created |
| * |
| * @dev_priv: Pointer to device private struct. |
| * @width: requested width |
| * @height: requested height |
| * |
| * Surfaces need to be less than texture size |
| */ |
| static bool |
| vmw_kms_srf_ok(struct vmw_private *dev_priv, uint32_t width, uint32_t height) |
| { |
| if (width > dev_priv->texture_max_width || |
| height > dev_priv->texture_max_height) |
| return false; |
| |
| return true; |
| } |
| |
| /** |
| * vmw_kms_new_framebuffer - Create a new framebuffer. |
| * |
| * @dev_priv: Pointer to device private struct. |
| * @bo: Pointer to buffer object to wrap the kms framebuffer around. |
| * Either @bo or @surface must be NULL. |
| * @surface: Pointer to a surface to wrap the kms framebuffer around. |
| * Either @bo or @surface must be NULL. |
| * @only_2d: No presents will occur to this buffer object based framebuffer. |
| * This helps the code to do some important optimizations. |
| * @mode_cmd: Frame-buffer metadata. |
| */ |
| struct vmw_framebuffer * |
| vmw_kms_new_framebuffer(struct vmw_private *dev_priv, |
| struct vmw_buffer_object *bo, |
| struct vmw_surface *surface, |
| bool only_2d, |
| const struct drm_mode_fb_cmd2 *mode_cmd) |
| { |
| struct vmw_framebuffer *vfb = NULL; |
| bool is_bo_proxy = false; |
| int ret; |
| |
| /* |
| * We cannot use the SurfaceDMA command in an non-accelerated VM, |
| * therefore, wrap the buffer object in a surface so we can use the |
| * SurfaceCopy command. |
| */ |
| if (vmw_kms_srf_ok(dev_priv, mode_cmd->width, mode_cmd->height) && |
| bo && only_2d && |
| mode_cmd->width > 64 && /* Don't create a proxy for cursor */ |
| dev_priv->active_display_unit == vmw_du_screen_target) { |
| ret = vmw_create_bo_proxy(&dev_priv->drm, mode_cmd, |
| bo, &surface); |
| if (ret) |
| return ERR_PTR(ret); |
| |
| is_bo_proxy = true; |
| } |
| |
| /* Create the new framebuffer depending one what we have */ |
| if (surface) { |
| ret = vmw_kms_new_framebuffer_surface(dev_priv, surface, &vfb, |
| mode_cmd, |
| is_bo_proxy); |
| /* |
| * vmw_create_bo_proxy() adds a reference that is no longer |
| * needed |
| */ |
| if (is_bo_proxy) |
| vmw_surface_unreference(&surface); |
| } else if (bo) { |
| ret = vmw_kms_new_framebuffer_bo(dev_priv, bo, &vfb, |
| mode_cmd); |
| } else { |
| BUG(); |
| } |
| |
| if (ret) |
| return ERR_PTR(ret); |
| |
| vfb->pin = vmw_framebuffer_pin; |
| vfb->unpin = vmw_framebuffer_unpin; |
| |
| return vfb; |
| } |
| |
| /* |
| * Generic Kernel modesetting functions |
| */ |
| |
| static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, |
| struct drm_file *file_priv, |
| const struct drm_mode_fb_cmd2 *mode_cmd) |
| { |
| struct vmw_private *dev_priv = vmw_priv(dev); |
| struct vmw_framebuffer *vfb = NULL; |
| struct vmw_surface *surface = NULL; |
| struct vmw_buffer_object *bo = NULL; |
| int ret; |
| |
| /* returns either a bo or surface */ |
| ret = vmw_user_lookup_handle(dev_priv, file_priv, |
| mode_cmd->handles[0], |
| &surface, &bo); |
| if (ret) { |
| DRM_ERROR("Invalid buffer object handle %u (0x%x).\n", |
| mode_cmd->handles[0], mode_cmd->handles[0]); |
| goto err_out; |
| } |
| |
| |
| if (!bo && |
| !vmw_kms_srf_ok(dev_priv, mode_cmd->width, mode_cmd->height)) { |
| DRM_ERROR("Surface size cannot exceed %dx%d\n", |
| dev_priv->texture_max_width, |
| dev_priv->texture_max_height); |
| goto err_out; |
| } |
| |
| |
| vfb = vmw_kms_new_framebuffer(dev_priv, bo, surface, |
| !(dev_priv->capabilities & SVGA_CAP_3D), |
| mode_cmd); |
| if (IS_ERR(vfb)) { |
| ret = PTR_ERR(vfb); |
| goto err_out; |
| } |
| |
| err_out: |
| /* vmw_user_lookup_handle takes one ref so does new_fb */ |
| if (bo) |
| vmw_bo_unreference(&bo); |
| if (surface) |
| vmw_surface_unreference(&surface); |
| |
| if (ret) { |
| DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret); |
| return ERR_PTR(ret); |
| } |
| |
| return &vfb->base; |
| } |
| |
| /** |
| * vmw_kms_check_display_memory - Validates display memory required for a |
| * topology |
| * @dev: DRM device |
| * @num_rects: number of drm_rect in rects |
| * @rects: array of drm_rect representing the topology to validate indexed by |
| * crtc index. |
| * |
| * Returns: |
| * 0 on success otherwise negative error code |
| */ |
| static int vmw_kms_check_display_memory(struct drm_device *dev, |
| uint32_t num_rects, |
| struct drm_rect *rects) |
| { |
| struct vmw_private *dev_priv = vmw_priv(dev); |
| struct drm_rect bounding_box = {0}; |
| u64 total_pixels = 0, pixel_mem, bb_mem; |
| int i; |
| |
| for (i = 0; i < num_rects; i++) { |
| /* |
| * For STDU only individual screen (screen target) is limited by |
| * SCREENTARGET_MAX_WIDTH/HEIGHT registers. |
| */ |
| if (dev_priv->active_display_unit == vmw_du_screen_target && |
| (drm_rect_width(&rects[i]) > dev_priv->stdu_max_width || |
| drm_rect_height(&rects[i]) > dev_priv->stdu_max_height)) { |
| VMW_DEBUG_KMS("Screen size not supported.\n"); |
| return -EINVAL; |
| } |
| |
| /* Bounding box upper left is at (0,0). */ |
| if (rects[i].x2 > bounding_box.x2) |
| bounding_box.x2 = rects[i].x2; |
| |
| if (rects[i].y2 > bounding_box.y2) |
| bounding_box.y2 = rects[i].y2; |
| |
| total_pixels += (u64) drm_rect_width(&rects[i]) * |
| (u64) drm_rect_height(&rects[i]); |
| } |
| |
| /* Virtual svga device primary limits are always in 32-bpp. */ |
| pixel_mem = total_pixels * 4; |
| |
| /* |
| * For HV10 and below prim_bb_mem is vram size. When |
| * SVGA_REG_MAX_PRIMARY_BOUNDING_BOX_MEM is not present vram size is |
| * limit on primary bounding box |
| */ |
| if (pixel_mem > dev_priv->max_primary_mem) { |
| VMW_DEBUG_KMS("Combined output size too large.\n"); |
| return -EINVAL; |
| } |
| |
| /* SVGA_CAP_NO_BB_RESTRICTION is available for STDU only. */ |
| if (dev_priv->active_display_unit != vmw_du_screen_target || |
| !(dev_priv->capabilities & SVGA_CAP_NO_BB_RESTRICTION)) { |
| bb_mem = (u64) bounding_box.x2 * bounding_box.y2 * 4; |
| |
| if (bb_mem > dev_priv->max_primary_mem) { |
| VMW_DEBUG_KMS("Topology is beyond supported limits.\n"); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * vmw_crtc_state_and_lock - Return new or current crtc state with locked |
| * crtc mutex |
| * @state: The atomic state pointer containing the new atomic state |
| * @crtc: The crtc |
| * |
| * This function returns the new crtc state if it's part of the state update. |
| * Otherwise returns the current crtc state. It also makes sure that the |
| * crtc mutex is locked. |
| * |
| * Returns: A valid crtc state pointer or NULL. It may also return a |
| * pointer error, in particular -EDEADLK if locking needs to be rerun. |
| */ |
| static struct drm_crtc_state * |
| vmw_crtc_state_and_lock(struct drm_atomic_state *state, struct drm_crtc *crtc) |
| { |
| struct drm_crtc_state *crtc_state; |
| |
| crtc_state = drm_atomic_get_new_crtc_state(state, crtc); |
| if (crtc_state) { |
| lockdep_assert_held(&crtc->mutex.mutex.base); |
| } else { |
| int ret = drm_modeset_lock(&crtc->mutex, state->acquire_ctx); |
| |
| if (ret != 0 && ret != -EALREADY) |
| return ERR_PTR(ret); |
| |
| crtc_state = crtc->state; |
| } |
| |
| return crtc_state; |
| } |
| |
| /** |
| * vmw_kms_check_implicit - Verify that all implicit display units scan out |
| * from the same fb after the new state is committed. |
| * @dev: The drm_device. |
| * @state: The new state to be checked. |
| * |
| * Returns: |
| * Zero on success, |
| * -EINVAL on invalid state, |
| * -EDEADLK if modeset locking needs to be rerun. |
| */ |
| static int vmw_kms_check_implicit(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| struct drm_framebuffer *implicit_fb = NULL; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *crtc_state; |
| struct drm_plane_state *plane_state; |
| |
| drm_for_each_crtc(crtc, dev) { |
| struct vmw_display_unit *du = vmw_crtc_to_du(crtc); |
| |
| if (!du->is_implicit) |
| continue; |
| |
| crtc_state = vmw_crtc_state_and_lock(state, crtc); |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| |
| if (!crtc_state || !crtc_state->enable) |
| continue; |
| |
| /* |
| * Can't move primary planes across crtcs, so this is OK. |
| * It also means we don't need to take the plane mutex. |
| */ |
| plane_state = du->primary.state; |
| if (plane_state->crtc != crtc) |
| continue; |
| |
| if (!implicit_fb) |
| implicit_fb = plane_state->fb; |
| else if (implicit_fb != plane_state->fb) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * vmw_kms_check_topology - Validates topology in drm_atomic_state |
| * @dev: DRM device |
| * @state: the driver state object |
| * |
| * Returns: |
| * 0 on success otherwise negative error code |
| */ |
| static int vmw_kms_check_topology(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| struct drm_crtc_state *old_crtc_state, *new_crtc_state; |
| struct drm_rect *rects; |
| struct drm_crtc *crtc; |
| uint32_t i; |
| int ret = 0; |
| |
| rects = kcalloc(dev->mode_config.num_crtc, sizeof(struct drm_rect), |
| GFP_KERNEL); |
| if (!rects) |
| return -ENOMEM; |
| |
| drm_for_each_crtc(crtc, dev) { |
| struct vmw_display_unit *du = vmw_crtc_to_du(crtc); |
| struct drm_crtc_state *crtc_state; |
| |
| i = drm_crtc_index(crtc); |
| |
| crtc_state = vmw_crtc_state_and_lock(state, crtc); |
| if (IS_ERR(crtc_state)) { |
| ret = PTR_ERR(crtc_state); |
| goto clean; |
| } |
| |
| if (!crtc_state) |
| continue; |
| |
| if (crtc_state->enable) { |
| rects[i].x1 = du->gui_x; |
| rects[i].y1 = du->gui_y; |
| rects[i].x2 = du->gui_x + crtc_state->mode.hdisplay; |
| rects[i].y2 = du->gui_y + crtc_state->mode.vdisplay; |
| } else { |
| rects[i].x1 = 0; |
| rects[i].y1 = 0; |
| rects[i].x2 = 0; |
| rects[i].y2 = 0; |
| } |
| } |
| |
| /* Determine change to topology due to new atomic state */ |
| for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, |
| new_crtc_state, i) { |
| struct vmw_display_unit *du = vmw_crtc_to_du(crtc); |
| struct drm_connector *connector; |
| struct drm_connector_state *conn_state; |
| struct vmw_connector_state *vmw_conn_state; |
| |
| if (!du->pref_active && new_crtc_state->enable) { |
| VMW_DEBUG_KMS("Enabling a disabled display unit\n"); |
| ret = -EINVAL; |
| goto clean; |
| } |
| |
| /* |
| * For vmwgfx each crtc has only one connector attached and it |
| * is not changed so don't really need to check the |
| * crtc->connector_mask and iterate over it. |
| */ |
| connector = &du->connector; |
| conn_state = drm_atomic_get_connector_state(state, connector); |
| if (IS_ERR(conn_state)) { |
| ret = PTR_ERR(conn_state); |
| goto clean; |
| } |
| |
| vmw_conn_state = vmw_connector_state_to_vcs(conn_state); |
| vmw_conn_state->gui_x = du->gui_x; |
| vmw_conn_state->gui_y = du->gui_y; |
| } |
| |
| ret = vmw_kms_check_display_memory(dev, dev->mode_config.num_crtc, |
| rects); |
| |
| clean: |
| kfree(rects); |
| return ret; |
| } |
| |
| /** |
| * vmw_kms_atomic_check_modeset- validate state object for modeset changes |
| * |
| * @dev: DRM device |
| * @state: the driver state object |
| * |
| * This is a simple wrapper around drm_atomic_helper_check_modeset() for |
| * us to assign a value to mode->crtc_clock so that |
| * drm_calc_timestamping_constants() won't throw an error message |
| * |
| * Returns: |
| * Zero for success or -errno |
| */ |
| static int |
| vmw_kms_atomic_check_modeset(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *crtc_state; |
| bool need_modeset = false; |
| int i, ret; |
| |
| ret = drm_atomic_helper_check(dev, state); |
| if (ret) |
| return ret; |
| |
| ret = vmw_kms_check_implicit(dev, state); |
| if (ret) { |
| VMW_DEBUG_KMS("Invalid implicit state\n"); |
| return ret; |
| } |
| |
| for_each_new_crtc_in_state(state, crtc, crtc_state, i) { |
| if (drm_atomic_crtc_needs_modeset(crtc_state)) |
| need_modeset = true; |
| } |
| |
| if (need_modeset) |
| return vmw_kms_check_topology(dev, state); |
| |
| return ret; |
| } |
| |
| static const struct drm_mode_config_funcs vmw_kms_funcs = { |
| .fb_create = vmw_kms_fb_create, |
| .atomic_check = vmw_kms_atomic_check_modeset, |
| .atomic_commit = drm_atomic_helper_commit, |
| }; |
| |
| static int vmw_kms_generic_present(struct vmw_private *dev_priv, |
| struct drm_file *file_priv, |
| struct vmw_framebuffer *vfb, |
| struct vmw_surface *surface, |
| uint32_t sid, |
| int32_t destX, int32_t destY, |
| struct drm_vmw_rect *clips, |
| uint32_t num_clips) |
| { |
| return vmw_kms_sou_do_surface_dirty(dev_priv, vfb, NULL, clips, |
| &surface->res, destX, destY, |
| num_clips, 1, NULL, NULL); |
| } |
| |
| |
| int vmw_kms_present(struct vmw_private *dev_priv, |
| struct drm_file *file_priv, |
| struct vmw_framebuffer *vfb, |
| struct vmw_surface *surface, |
| uint32_t sid, |
| int32_t destX, int32_t destY, |
| struct drm_vmw_rect *clips, |
| uint32_t num_clips) |
| { |
| int ret; |
| |
| switch (dev_priv->active_display_unit) { |
| case vmw_du_screen_target: |
| ret = vmw_kms_stdu_surface_dirty(dev_priv, vfb, NULL, clips, |
| &surface->res, destX, destY, |
| num_clips, 1, NULL, NULL); |
| break; |
| case vmw_du_screen_object: |
| ret = vmw_kms_generic_present(dev_priv, file_priv, vfb, surface, |
| sid, destX, destY, clips, |
| num_clips); |
| break; |
| default: |
| WARN_ONCE(true, |
| "Present called with invalid display system.\n"); |
| ret = -ENOSYS; |
| break; |
| } |
| if (ret) |
| return ret; |
| |
| vmw_cmd_flush(dev_priv, false); |
| |
| return 0; |
| } |
| |
| static void |
| vmw_kms_create_hotplug_mode_update_property(struct vmw_private *dev_priv) |
| { |
| if (dev_priv->hotplug_mode_update_property) |
| return; |
| |
| dev_priv->hotplug_mode_update_property = |
| drm_property_create_range(&dev_priv->drm, |
| DRM_MODE_PROP_IMMUTABLE, |
| "hotplug_mode_update", 0, 1); |
| } |
| |
| int vmw_kms_init(struct vmw_private *dev_priv) |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| int ret; |
| static const char *display_unit_names[] = { |
| "Invalid", |
| "Legacy", |
| "Screen Object", |
| "Screen Target", |
| "Invalid (max)" |
| }; |
| |
| drm_mode_config_init(dev); |
| dev->mode_config.funcs = &vmw_kms_funcs; |
| dev->mode_config.min_width = 1; |
| dev->mode_config.min_height = 1; |
| dev->mode_config.max_width = dev_priv->texture_max_width; |
| dev->mode_config.max_height = dev_priv->texture_max_height; |
| dev->mode_config.preferred_depth = dev_priv->assume_16bpp ? 16 : 32; |
| dev->mode_config.prefer_shadow_fbdev = !dev_priv->has_mob; |
| |
| drm_mode_create_suggested_offset_properties(dev); |
| vmw_kms_create_hotplug_mode_update_property(dev_priv); |
| |
| ret = vmw_kms_stdu_init_display(dev_priv); |
| if (ret) { |
| ret = vmw_kms_sou_init_display(dev_priv); |
| if (ret) /* Fallback */ |
| ret = vmw_kms_ldu_init_display(dev_priv); |
| } |
| BUILD_BUG_ON(ARRAY_SIZE(display_unit_names) != (vmw_du_max + 1)); |
| drm_info(&dev_priv->drm, "%s display unit initialized\n", |
| display_unit_names[dev_priv->active_display_unit]); |
| |
| return ret; |
| } |
| |
| int vmw_kms_close(struct vmw_private *dev_priv) |
| { |
| int ret = 0; |
| |
| /* |
| * Docs says we should take the lock before calling this function |
| * but since it destroys encoders and our destructor calls |
| * drm_encoder_cleanup which takes the lock we deadlock. |
| */ |
| drm_mode_config_cleanup(&dev_priv->drm); |
| if (dev_priv->active_display_unit == vmw_du_legacy) |
| ret = vmw_kms_ldu_close_display(dev_priv); |
| |
| return ret; |
| } |
| |
| int vmw_kms_cursor_bypass_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_vmw_cursor_bypass_arg *arg = data; |
| struct vmw_display_unit *du; |
| struct drm_crtc *crtc; |
| int ret = 0; |
| |
| mutex_lock(&dev->mode_config.mutex); |
| if (arg->flags & DRM_VMW_CURSOR_BYPASS_ALL) { |
| |
| list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { |
| du = vmw_crtc_to_du(crtc); |
| du->hotspot_x = arg->xhot; |
| du->hotspot_y = arg->yhot; |
| } |
| |
| mutex_unlock(&dev->mode_config.mutex); |
| return 0; |
| } |
| |
| crtc = drm_crtc_find(dev, file_priv, arg->crtc_id); |
| if (!crtc) { |
| ret = -ENOENT; |
| goto out; |
| } |
| |
| du = vmw_crtc_to_du(crtc); |
| |
| du->hotspot_x = arg->xhot; |
| du->hotspot_y = arg->yhot; |
| |
| out: |
| mutex_unlock(&dev->mode_config.mutex); |
| |
| return ret; |
| } |
| |
| int vmw_kms_write_svga(struct vmw_private *vmw_priv, |
| unsigned width, unsigned height, unsigned pitch, |
| unsigned bpp, unsigned depth) |
| { |
| if (vmw_priv->capabilities & SVGA_CAP_PITCHLOCK) |
| vmw_write(vmw_priv, SVGA_REG_PITCHLOCK, pitch); |
| else if (vmw_fifo_have_pitchlock(vmw_priv)) |
| vmw_fifo_mem_write(vmw_priv, SVGA_FIFO_PITCHLOCK, pitch); |
| vmw_write(vmw_priv, SVGA_REG_WIDTH, width); |
| vmw_write(vmw_priv, SVGA_REG_HEIGHT, height); |
| if ((vmw_priv->capabilities & SVGA_CAP_8BIT_EMULATION) != 0) |
| vmw_write(vmw_priv, SVGA_REG_BITS_PER_PIXEL, bpp); |
| |
| if (vmw_read(vmw_priv, SVGA_REG_DEPTH) != depth) { |
| DRM_ERROR("Invalid depth %u for %u bpp, host expects %u\n", |
| depth, bpp, vmw_read(vmw_priv, SVGA_REG_DEPTH)); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| bool vmw_kms_validate_mode_vram(struct vmw_private *dev_priv, |
| uint32_t pitch, |
| uint32_t height) |
| { |
| return ((u64) pitch * (u64) height) < (u64) |
| ((dev_priv->active_display_unit == vmw_du_screen_target) ? |
| dev_priv->max_primary_mem : dev_priv->vram_size); |
| } |
| |
| /** |
| * vmw_du_update_layout - Update the display unit with topology from resolution |
| * plugin and generate DRM uevent |
| * @dev_priv: device private |
| * @num_rects: number of drm_rect in rects |
| * @rects: toplogy to update |
| */ |
| static int vmw_du_update_layout(struct vmw_private *dev_priv, |
| unsigned int num_rects, struct drm_rect *rects) |
| { |
| struct drm_device *dev = &dev_priv->drm; |
| struct vmw_display_unit *du; |
| struct drm_connector *con; |
| struct drm_connector_list_iter conn_iter; |
| struct drm_modeset_acquire_ctx ctx; |
| struct drm_crtc *crtc; |
| int ret; |
| |
| /* Currently gui_x/y is protected with the crtc mutex */ |
| mutex_lock(&dev->mode_config.mutex); |
| drm_modeset_acquire_init(&ctx, 0); |
| retry: |
| drm_for_each_crtc(crtc, dev) { |
| ret = drm_modeset_lock(&crtc->mutex, &ctx); |
| if (ret < 0) { |
| if (ret == -EDEADLK) { |
| drm_modeset_backoff(&ctx); |
| goto retry; |
| } |
| goto out_fini; |
| } |
| } |
| |
| drm_connector_list_iter_begin(dev, &conn_iter); |
| drm_for_each_connector_iter(con, &conn_iter) { |
| du = vmw_connector_to_du(con); |
| if (num_rects > du->unit) { |
| du->pref_width = drm_rect_width(&rects[du->unit]); |
| du->pref_height = drm_rect_height(&rects[du->unit]); |
| du->pref_active = true; |
| du->gui_x = rects[du->unit].x1; |
| du->gui_y = rects[du->unit].y1; |
| } else { |
| du->pref_width = VMWGFX_MIN_INITIAL_WIDTH; |
| du->pref_height = VMWGFX_MIN_INITIAL_HEIGHT; |
| du->pref_active = false; |
| du->gui_x = 0; |
| du->gui_y = 0; |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| list_for_each_entry(con, &dev->mode_config.connector_list, head) { |
| du = vmw_connector_to_du(con); |
| if (num_rects > du->unit) { |
| drm_object_property_set_value |
| (&con->base, dev->mode_config.suggested_x_property, |
| du->gui_x); |
| drm_object_property_set_value |
| (&con->base, dev->mode_config.suggested_y_property, |
| du->gui_y); |
| } else { |
| drm_object_property_set_value |
| (&con->base, dev->mode_config.suggested_x_property, |
| 0); |
| drm_object_property_set_value |
| (&con->base, dev->mode_config.suggested_y_property, |
| 0); |
| } |
| con->status = vmw_du_connector_detect(con, true); |
| } |
| out_fini: |
| drm_modeset_drop_locks(&ctx); |
| drm_modeset_acquire_fini(&ctx); |
| mutex_unlock(&dev->mode_config.mutex); |
| |
| drm_sysfs_hotplug_event(dev); |
| |
| return 0; |
| } |
| |
| int vmw_du_crtc_gamma_set(struct drm_crtc *crtc, |
| u16 *r, u16 *g, u16 *b, |
| uint32_t size, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct vmw_private *dev_priv = vmw_priv(crtc->dev); |
| int i; |
| |
| for (i = 0; i < size; i++) { |
| DRM_DEBUG("%d r/g/b = 0x%04x / 0x%04x / 0x%04x\n", i, |
| r[i], g[i], b[i]); |
| vmw_write(dev_priv, SVGA_PALETTE_BASE + i * 3 + 0, r[i] >> 8); |
| vmw_write(dev_priv, SVGA_PALETTE_BASE + i * 3 + 1, g[i] >> 8); |
| vmw_write(dev_priv, SVGA_PALETTE_BASE + i * 3 + 2, b[i] >> 8); |
| } |
| |
| return 0; |
| } |
| |
| int vmw_du_connector_dpms(struct drm_connector *connector, int mode) |
| { |
| return 0; |
| } |
| |
| enum drm_connector_status |
| vmw_du_connector_detect(struct drm_connector *connector, bool force) |
| { |
| uint32_t num_displays; |
| struct drm_device *dev = connector->dev; |
| struct vmw_private *dev_priv = vmw_priv(dev); |
| struct vmw_display_unit *du = vmw_connector_to_du(connector); |
| |
| num_displays = vmw_read(dev_priv, SVGA_REG_NUM_DISPLAYS); |
| |
| return ((vmw_connector_to_du(connector)->unit < num_displays && |
| du->pref_active) ? |
| connector_status_connected : connector_status_disconnected); |
| } |
| |
| static struct drm_display_mode vmw_kms_connector_builtin[] = { |
| /* 640x480@60Hz */ |
| { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25175, 640, 656, |
| 752, 800, 0, 480, 489, 492, 525, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 800x600@60Hz */ |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840, |
| 968, 1056, 0, 600, 601, 605, 628, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1024x768@60Hz */ |
| { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048, |
| 1184, 1344, 0, 768, 771, 777, 806, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 1152x864@75Hz */ |
| { DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216, |
| 1344, 1600, 0, 864, 865, 868, 900, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1280x720@60Hz */ |
| { DRM_MODE("1280x720", DRM_MODE_TYPE_DRIVER, 74500, 1280, 1344, |
| 1472, 1664, 0, 720, 723, 728, 748, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1280x768@60Hz */ |
| { DRM_MODE("1280x768", DRM_MODE_TYPE_DRIVER, 79500, 1280, 1344, |
| 1472, 1664, 0, 768, 771, 778, 798, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1280x800@60Hz */ |
| { DRM_MODE("1280x800", DRM_MODE_TYPE_DRIVER, 83500, 1280, 1352, |
| 1480, 1680, 0, 800, 803, 809, 831, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 1280x960@60Hz */ |
| { DRM_MODE("1280x960", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1376, |
| 1488, 1800, 0, 960, 961, 964, 1000, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1280x1024@60Hz */ |
| { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 108000, 1280, 1328, |
| 1440, 1688, 0, 1024, 1025, 1028, 1066, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1360x768@60Hz */ |
| { DRM_MODE("1360x768", DRM_MODE_TYPE_DRIVER, 85500, 1360, 1424, |
| 1536, 1792, 0, 768, 771, 777, 795, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1440x1050@60Hz */ |
| { DRM_MODE("1400x1050", DRM_MODE_TYPE_DRIVER, 121750, 1400, 1488, |
| 1632, 1864, 0, 1050, 1053, 1057, 1089, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1440x900@60Hz */ |
| { DRM_MODE("1440x900", DRM_MODE_TYPE_DRIVER, 106500, 1440, 1520, |
| 1672, 1904, 0, 900, 903, 909, 934, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1600x1200@60Hz */ |
| { DRM_MODE("1600x1200", DRM_MODE_TYPE_DRIVER, 162000, 1600, 1664, |
| 1856, 2160, 0, 1200, 1201, 1204, 1250, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1680x1050@60Hz */ |
| { DRM_MODE("1680x1050", DRM_MODE_TYPE_DRIVER, 146250, 1680, 1784, |
| 1960, 2240, 0, 1050, 1053, 1059, 1089, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1792x1344@60Hz */ |
| { DRM_MODE("1792x1344", DRM_MODE_TYPE_DRIVER, 204750, 1792, 1920, |
| 2120, 2448, 0, 1344, 1345, 1348, 1394, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1853x1392@60Hz */ |
| { DRM_MODE("1856x1392", DRM_MODE_TYPE_DRIVER, 218250, 1856, 1952, |
| 2176, 2528, 0, 1392, 1393, 1396, 1439, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1920x1080@60Hz */ |
| { DRM_MODE("1920x1080", DRM_MODE_TYPE_DRIVER, 173000, 1920, 2048, |
| 2248, 2576, 0, 1080, 1083, 1088, 1120, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1920x1200@60Hz */ |
| { DRM_MODE("1920x1200", DRM_MODE_TYPE_DRIVER, 193250, 1920, 2056, |
| 2256, 2592, 0, 1200, 1203, 1209, 1245, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 1920x1440@60Hz */ |
| { DRM_MODE("1920x1440", DRM_MODE_TYPE_DRIVER, 234000, 1920, 2048, |
| 2256, 2600, 0, 1440, 1441, 1444, 1500, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 2560x1440@60Hz */ |
| { DRM_MODE("2560x1440", DRM_MODE_TYPE_DRIVER, 241500, 2560, 2608, |
| 2640, 2720, 0, 1440, 1443, 1448, 1481, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 2560x1600@60Hz */ |
| { DRM_MODE("2560x1600", DRM_MODE_TYPE_DRIVER, 348500, 2560, 2752, |
| 3032, 3504, 0, 1600, 1603, 1609, 1658, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, |
| /* 2880x1800@60Hz */ |
| { DRM_MODE("2880x1800", DRM_MODE_TYPE_DRIVER, 337500, 2880, 2928, |
| 2960, 3040, 0, 1800, 1803, 1809, 1852, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 3840x2160@60Hz */ |
| { DRM_MODE("3840x2160", DRM_MODE_TYPE_DRIVER, 533000, 3840, 3888, |
| 3920, 4000, 0, 2160, 2163, 2168, 2222, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* 3840x2400@60Hz */ |
| { DRM_MODE("3840x2400", DRM_MODE_TYPE_DRIVER, 592250, 3840, 3888, |
| 3920, 4000, 0, 2400, 2403, 2409, 2469, 0, |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC) }, |
| /* Terminate */ |
| { DRM_MODE("", 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) }, |
| }; |
| |
| /** |
| * vmw_guess_mode_timing - Provide fake timings for a |
| * 60Hz vrefresh mode. |
| * |
| * @mode: Pointer to a struct drm_display_mode with hdisplay and vdisplay |
| * members filled in. |
| */ |
| void vmw_guess_mode_timing(struct drm_display_mode *mode) |
| { |
| mode->hsync_start = mode->hdisplay + 50; |
| mode->hsync_end = mode->hsync_start + 50; |
| mode->htotal = mode->hsync_end + 50; |
| |
| mode->vsync_start = mode->vdisplay + 50; |
| mode->vsync_end = mode->vsync_start + 50; |
| mode->vtotal = mode->vsync_end + 50; |
| |
| mode->clock = (u32)mode->htotal * (u32)mode->vtotal / 100 * 6; |
| } |
| |
| |
| int vmw_du_connector_fill_modes(struct drm_connector *connector, |
| uint32_t max_width, uint32_t max_height) |
| { |
| struct vmw_display_unit *du = vmw_connector_to_du(connector); |
| struct drm_device *dev = connector->dev; |
| struct vmw_private *dev_priv = vmw_priv(dev); |
| struct drm_display_mode *mode = NULL; |
| struct drm_display_mode *bmode; |
| struct drm_display_mode prefmode = { DRM_MODE("preferred", |
| DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) |
| }; |
| int i; |
| u32 assumed_bpp = 4; |
| |
| if (dev_priv->assume_16bpp) |
| assumed_bpp = 2; |
| |
| max_width = min(max_width, dev_priv->texture_max_width); |
| max_height = min(max_height, dev_priv->texture_max_height); |
| |
| /* |
| * For STDU extra limit for a mode on SVGA_REG_SCREENTARGET_MAX_WIDTH/ |
| * HEIGHT registers. |
| */ |
| if (dev_priv->active_display_unit == vmw_du_screen_target) { |
| max_width = min(max_width, dev_priv->stdu_max_width); |
| max_height = min(max_height, dev_priv->stdu_max_height); |
| } |
| |
| /* Add preferred mode */ |
| mode = drm_mode_duplicate(dev, &prefmode); |
| if (!mode) |
| return 0; |
| mode->hdisplay = du->pref_width; |
| mode->vdisplay = du->pref_height; |
| vmw_guess_mode_timing(mode); |
| drm_mode_set_name(mode); |
| |
| if (vmw_kms_validate_mode_vram(dev_priv, |
| mode->hdisplay * assumed_bpp, |
| mode->vdisplay)) { |
| drm_mode_probed_add(connector, mode); |
| } else { |
| drm_mode_destroy(dev, mode); |
| mode = NULL; |
| } |
| |
| if (du->pref_mode) { |
| list_del_init(&du->pref_mode->head); |
| drm_mode_destroy(dev, du->pref_mode); |
| } |
| |
| /* mode might be null here, this is intended */ |
| du->pref_mode = mode; |
| |
| for (i = 0; vmw_kms_connector_builtin[i].type != 0; i++) { |
| bmode = &vmw_kms_connector_builtin[i]; |
| if (bmode->hdisplay > max_width || |
| bmode->vdisplay > max_height) |
| continue; |
| |
| if (!vmw_kms_validate_mode_vram(dev_priv, |
| bmode->hdisplay * assumed_bpp, |
| bmode->vdisplay)) |
| continue; |
| |
| mode = drm_mode_duplicate(dev, bmode); |
| if (!mode) |
| return 0; |
| |
| drm_mode_probed_add(connector, mode); |
| } |
| |
| drm_connector_list_update(connector); |
| /* Move the prefered mode first, help apps pick the right mode. */ |
| drm_mode_sort(&connector->modes); |
| |
| return 1; |
| } |
| |
| /** |
| * vmw_kms_update_layout_ioctl - Handler for DRM_VMW_UPDATE_LAYOUT ioctl |
| * @dev: drm device for the ioctl |
| * @data: data pointer for the ioctl |
| * @file_priv: drm file for the ioctl call |
| * |
| * Update preferred topology of display unit as per ioctl request. The topology |
| * is expressed as array of drm_vmw_rect. |
| * e.g. |
| * [0 0 640 480] [640 0 800 600] [0 480 640 480] |
| * |
| * NOTE: |
| * The x and y offset (upper left) in drm_vmw_rect cannot be less than 0. Beside |
| * device limit on topology, x + w and y + h (lower right) cannot be greater |
| * than INT_MAX. So topology beyond these limits will return with error. |
| * |
| * Returns: |
| * Zero on success, negative errno on failure. |
| */ |
| int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct vmw_private *dev_priv = vmw_priv(dev); |
| struct drm_mode_config *mode_config = &dev->mode_config; |
| struct drm_vmw_update_layout_arg *arg = |
| (struct drm_vmw_update_layout_arg *)data; |
| void __user *user_rects; |
| struct drm_vmw_rect *rects; |
| struct drm_rect *drm_rects; |
| unsigned rects_size; |
| int ret, i; |
| |
| if (!arg->num_outputs) { |
| struct drm_rect def_rect = {0, 0, |
| VMWGFX_MIN_INITIAL_WIDTH, |
| VMWGFX_MIN_INITIAL_HEIGHT}; |
| vmw_du_update_layout(dev_priv, 1, &def_rect); |
| return 0; |
| } |
| |
| rects_size = arg->num_outputs * sizeof(struct drm_vmw_rect); |
| rects = kcalloc(arg->num_outputs, sizeof(struct drm_vmw_rect), |
| GFP_KERNEL); |
| if (unlikely(!rects)) |
| return -ENOMEM; |
| |
| user_rects = (void __user *)(unsigned long)arg->rects; |
| ret = copy_from_user(rects, user_rects, rects_size); |
| if (unlikely(ret != 0)) { |
| DRM_ERROR("Failed to get rects.\n"); |
| ret = -EFAULT; |
| goto out_free; |
| } |
| |
| drm_rects = (struct drm_rect *)rects; |
| |
| VMW_DEBUG_KMS("Layout count = %u\n", arg->num_outputs); |
| for (i = 0; i < arg->num_outputs; i++) { |
| struct drm_vmw_rect curr_rect; |
| |
| /* Verify user-space for overflow as kernel use drm_rect */ |
| if ((rects[i].x + rects[i].w > INT_MAX) || |
| (rects[i].y + rects[i].h > INT_MAX)) { |
| ret = -ERANGE; |
| goto out_free; |
| } |
| |
| curr_rect = rects[i]; |
| drm_rects[i].x1 = curr_rect.x; |
| drm_rects[i].y1 = curr_rect.y; |
| drm_rects[i].x2 = curr_rect.x + curr_rect.w; |
| drm_rects[i].y2 = curr_rect.y + curr_rect.h; |
| |
| VMW_DEBUG_KMS(" x1 = %d y1 = %d x2 = %d y2 = %d\n", |
| drm_rects[i].x1, drm_rects[i].y1, |
| drm_rects[i].x2, drm_rects[i].y2); |
| |
| /* |
| * Currently this check is limiting the topology within |
| * mode_config->max (which actually is max texture size |
| * supported by virtual device). This limit is here to address |
| * window managers that create a big framebuffer for whole |
| * topology. |
| */ |
| if (drm_rects[i].x1 < 0 || drm_rects[i].y1 < 0 || |
| drm_rects[i].x2 > mode_config->max_width || |
| drm_rects[i].y2 > mode_config->max_height) { |
| VMW_DEBUG_KMS("Invalid layout %d %d %d %d\n", |
| drm_rects[i].x1, drm_rects[i].y1, |
| drm_rects[i].x2, drm_rects[i].y2); |
| ret = -EINVAL; |
| goto out_free; |
| } |
| } |
| |
| ret = vmw_kms_check_display_memory(dev, arg->num_outputs, drm_rects); |
| |
| if (ret == 0) |
| vmw_du_update_layout(dev_priv, arg->num_outputs, drm_rects); |
| |
| out_free: |
| kfree(rects); |
| return ret; |
| } |
| |
| /** |
| * vmw_kms_helper_dirty - Helper to build commands and perform actions based |
| * on a set of cliprects and a set of display units. |
| * |
| * @dev_priv: Pointer to a device private structure. |
| * @framebuffer: Pointer to the framebuffer on which to perform the actions. |
| * @clips: A set of struct drm_clip_rect. Either this os @vclips must be NULL. |
| * Cliprects are given in framebuffer coordinates. |
| * @vclips: A set of struct drm_vmw_rect cliprects. Either this or @clips must |
| * be NULL. Cliprects are given in source coordinates. |
| * @dest_x: X coordinate offset for the crtc / destination clip rects. |
| * @dest_y: Y coordinate offset for the crtc / destination clip rects. |
| * @num_clips: Number of cliprects in the @clips or @vclips array. |
| * @increment: Integer with which to increment the clip counter when looping. |
| * Used to skip a predetermined number of clip rects. |
| * @dirty: Closure structure. See the description of struct vmw_kms_dirty. |
| */ |
| int vmw_kms_helper_dirty(struct vmw_private *dev_priv, |
| struct vmw_framebuffer *framebuffer, |
| const struct drm_clip_rect *clips, |
| const struct drm_vmw_rect *vclips, |
| s32 dest_x, s32 dest_y, |
| int num_clips, |
| int increment, |
| struct vmw_kms_dirty *dirty) |
| { |
| struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS]; |
| struct drm_crtc *crtc; |
| u32 num_units = 0; |
| u32 i, k; |
| |
| dirty->dev_priv = dev_priv; |
| |
| /* If crtc is passed, no need to iterate over other display units */ |
| if (dirty->crtc) { |
| units[num_units++] = vmw_crtc_to_du(dirty->crtc); |
| } else { |
| list_for_each_entry(crtc, &dev_priv->drm.mode_config.crtc_list, |
| head) { |
| struct drm_plane *plane = crtc->primary; |
| |
| if (plane->state->fb == &framebuffer->base) |
| units[num_units++] = vmw_crtc_to_du(crtc); |
| } |
| } |
| |
| for (k = 0; k < num_units; k++) { |
| struct vmw_display_unit *unit = units[k]; |
| s32 crtc_x = unit->crtc.x; |
| s32 crtc_y = unit->crtc.y; |
| s32 crtc_width = unit->crtc.mode.hdisplay; |
| s32 crtc_height = unit->crtc.mode.vdisplay; |
| const struct drm_clip_rect *clips_ptr = clips; |
| const struct drm_vmw_rect *vclips_ptr = vclips; |
| |
| dirty->unit = unit; |
| if (dirty->fifo_reserve_size > 0) { |
| dirty->cmd = VMW_CMD_RESERVE(dev_priv, |
| dirty->fifo_reserve_size); |
| if (!dirty->cmd) |
| return -ENOMEM; |
| |
| memset(dirty->cmd, 0, dirty->fifo_reserve_size); |
| } |
| dirty->num_hits = 0; |
| for (i = 0; i < num_clips; i++, clips_ptr += increment, |
| vclips_ptr += increment) { |
| s32 clip_left; |
| s32 clip_top; |
| |
| /* |
| * Select clip array type. Note that integer type |
| * in @clips is unsigned short, whereas in @vclips |
| * it's 32-bit. |
| */ |
| if (clips) { |
| dirty->fb_x = (s32) clips_ptr->x1; |
| dirty->fb_y = (s32) clips_ptr->y1; |
| dirty->unit_x2 = (s32) clips_ptr->x2 + dest_x - |
| crtc_x; |
| dirty->unit_y2 = (s32) clips_ptr->y2 + dest_y - |
| crtc_y; |
| } else { |
| dirty->fb_x = vclips_ptr->x; |
| dirty->fb_y = vclips_ptr->y; |
| dirty->unit_x2 = dirty->fb_x + vclips_ptr->w + |
| dest_x - crtc_x; |
| dirty->unit_y2 = dirty->fb_y + vclips_ptr->h + |
| dest_y - crtc_y; |
| } |
| |
| dirty->unit_x1 = dirty->fb_x + dest_x - crtc_x; |
| dirty->unit_y1 = dirty->fb_y + dest_y - crtc_y; |
| |
| /* Skip this clip if it's outside the crtc region */ |
| if (dirty->unit_x1 >= crtc_width || |
| dirty->unit_y1 >= crtc_height || |
| dirty->unit_x2 <= 0 || dirty->unit_y2 <= 0) |
| continue; |
| |
| /* Clip right and bottom to crtc limits */ |
| dirty->unit_x2 = min_t(s32, dirty->unit_x2, |
| crtc_width); |
| dirty->unit_y2 = min_t(s32, dirty->unit_y2, |
| crtc_height); |
| |
| /* Clip left and top to crtc limits */ |
| clip_left = min_t(s32, dirty->unit_x1, 0); |
| clip_top = min_t(s32, dirty->unit_y1, 0); |
| dirty->unit_x1 -= clip_left; |
| dirty->unit_y1 -= clip_top; |
| dirty->fb_x -= clip_left; |
| dirty->fb_y -= clip_top; |
| |
| dirty->clip(dirty); |
| } |
| |
| dirty->fifo_commit(dirty); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * vmw_kms_helper_validation_finish - Helper for post KMS command submission |
| * cleanup and fencing |
| * @dev_priv: Pointer to the device-private struct |
| * @file_priv: Pointer identifying the client when user-space fencing is used |
| * @ctx: Pointer to the validation context |
| * @out_fence: If non-NULL, returned refcounted fence-pointer |
| * @user_fence_rep: If non-NULL, pointer to user-space address area |
| * in which to copy user-space fence info |
| */ |
| void vmw_kms_helper_validation_finish(struct vmw_private *dev_priv, |
| struct drm_file *file_priv, |
| struct vmw_validation_context *ctx, |
| struct vmw_fence_obj **out_fence, |
| struct drm_vmw_fence_rep __user * |
| user_fence_rep) |
| { |
| struct vmw_fence_obj *fence = NULL; |
| uint32_t handle = 0; |
| int ret = 0; |
| |
| if (file_priv || user_fence_rep || vmw_validation_has_bos(ctx) || |
| out_fence) |
| ret = vmw_execbuf_fence_commands(file_priv, dev_priv, &fence, |
| file_priv ? &handle : NULL); |
| vmw_validation_done(ctx, fence); |
| if (file_priv) |
| vmw_execbuf_copy_fence_user(dev_priv, vmw_fpriv(file_priv), |
| ret, user_fence_rep, fence, |
| handle, -1); |
| if (out_fence) |
| *out_fence = fence; |
| else |
| vmw_fence_obj_unreference(&fence); |
| } |
| |
| /** |
| * vmw_kms_update_proxy - Helper function to update a proxy surface from |
| * its backing MOB. |
| * |
| * @res: Pointer to the surface resource |
| * @clips: Clip rects in framebuffer (surface) space. |
| * @num_clips: Number of clips in @clips. |
| * @increment: Integer with which to increment the clip counter when looping. |
| * Used to skip a predetermined number of clip rects. |
| * |
| * This function makes sure the proxy surface is updated from its backing MOB |
| * using the region given by @clips. The surface resource @res and its backing |
| * MOB needs to be reserved and validated on call. |
| */ |
| int vmw_kms_update_proxy(struct vmw_resource *res, |
| const struct drm_clip_rect *clips, |
| unsigned num_clips, |
| int increment) |
| { |
| struct vmw_private *dev_priv = res->dev_priv; |
| struct drm_vmw_size *size = &vmw_res_to_srf(res)->metadata.base_size; |
| struct { |
| SVGA3dCmdHeader header; |
| SVGA3dCmdUpdateGBImage body; |
| } *cmd; |
| SVGA3dBox *box; |
| size_t copy_size = 0; |
| int i; |
| |
| if (!clips) |
| return 0; |
| |
| cmd = VMW_CMD_RESERVE(dev_priv, sizeof(*cmd) * num_clips); |
| if (!cmd) |
| return -ENOMEM; |
| |
| for (i = 0; i < num_clips; ++i, clips += increment, ++cmd) { |
| box = &cmd->body.box; |
| |
| cmd->header.id = SVGA_3D_CMD_UPDATE_GB_IMAGE; |
| cmd->header.size = sizeof(cmd->body); |
| cmd->body.image.sid = res->id; |
| cmd->body.image.face = 0; |
| cmd->body.image.mipmap = 0; |
| |
| if (clips->x1 > size->width || clips->x2 > size->width || |
| clips->y1 > size->height || clips->y2 > size->height) { |
| DRM_ERROR("Invalid clips outsize of framebuffer.\n"); |
| return -EINVAL; |
| } |
| |
| box->x = clips->x1; |
| box->y = clips->y1; |
| box->z = 0; |
| box->w = clips->x2 - clips->x1; |
| box->h = clips->y2 - clips->y1; |
| box->d = 1; |
| |
| copy_size += sizeof(*cmd); |
| } |
| |
| vmw_cmd_commit(dev_priv, copy_size); |
| |
| return 0; |
| } |
| |
| /** |
| * vmw_kms_create_implicit_placement_property - Set up the implicit placement |
| * property. |
| * |
| * @dev_priv: Pointer to a device private struct. |
| * |
| * Sets up the implicit placement property unless it's already set up. |
| */ |
| void |
| vmw_kms_create_implicit_placement_property(struct vmw_private *dev_priv) |
| { |
| if (dev_priv->implicit_placement_property) |
| return; |
| |
| dev_priv->implicit_placement_property = |
| drm_property_create_range(&dev_priv->drm, |
| DRM_MODE_PROP_IMMUTABLE, |
| "implicit_placement", 0, 1); |
| } |
| |
| /** |
| * vmw_kms_suspend - Save modesetting state and turn modesetting off. |
| * |
| * @dev: Pointer to the drm device |
| * Return: 0 on success. Negative error code on failure. |
| */ |
| int vmw_kms_suspend(struct drm_device *dev) |
| { |
| struct vmw_private *dev_priv = vmw_priv(dev); |
| |
| dev_priv->suspend_state = drm_atomic_helper_suspend(dev); |
| if (IS_ERR(dev_priv->suspend_state)) { |
| int ret = PTR_ERR(dev_priv->suspend_state); |
| |
| DRM_ERROR("Failed kms suspend: %d\n", ret); |
| dev_priv->suspend_state = NULL; |
| |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * vmw_kms_resume - Re-enable modesetting and restore state |
| * |
| * @dev: Pointer to the drm device |
| * Return: 0 on success. Negative error code on failure. |
| * |
| * State is resumed from a previous vmw_kms_suspend(). It's illegal |
| * to call this function without a previous vmw_kms_suspend(). |
| */ |
| int vmw_kms_resume(struct drm_device *dev) |
| { |
| struct vmw_private *dev_priv = vmw_priv(dev); |
| int ret; |
| |
| if (WARN_ON(!dev_priv->suspend_state)) |
| return 0; |
| |
| ret = drm_atomic_helper_resume(dev, dev_priv->suspend_state); |
| dev_priv->suspend_state = NULL; |
| |
| return ret; |
| } |
| |
| /** |
| * vmw_kms_lost_device - Notify kms that modesetting capabilities will be lost |
| * |
| * @dev: Pointer to the drm device |
| */ |
| void vmw_kms_lost_device(struct drm_device *dev) |
| { |
| drm_atomic_helper_shutdown(dev); |
| } |
| |
| /** |
| * vmw_du_helper_plane_update - Helper to do plane update on a display unit. |
| * @update: The closure structure. |
| * |
| * Call this helper after setting callbacks in &vmw_du_update_plane to do plane |
| * update on display unit. |
| * |
| * Return: 0 on success or a negative error code on failure. |
| */ |
| int vmw_du_helper_plane_update(struct vmw_du_update_plane *update) |
| { |
| struct drm_plane_state *state = update->plane->state; |
| struct drm_plane_state *old_state = update->old_state; |
| struct drm_atomic_helper_damage_iter iter; |
| struct drm_rect clip; |
| struct drm_rect bb; |
| DECLARE_VAL_CONTEXT(val_ctx, NULL, 0); |
| uint32_t reserved_size = 0; |
| uint32_t submit_size = 0; |
| uint32_t curr_size = 0; |
| uint32_t num_hits = 0; |
| void *cmd_start; |
| char *cmd_next; |
| int ret; |
| |
| /* |
| * Iterate in advance to check if really need plane update and find the |
| * number of clips that actually are in plane src for fifo allocation. |
| */ |
| drm_atomic_helper_damage_iter_init(&iter, old_state, state); |
| drm_atomic_for_each_plane_damage(&iter, &clip) |
| num_hits++; |
| |
| if (num_hits == 0) |
| return 0; |
| |
| if (update->vfb->bo) { |
| struct vmw_framebuffer_bo *vfbbo = |
| container_of(update->vfb, typeof(*vfbbo), base); |
| |
| ret = vmw_validation_add_bo(&val_ctx, vfbbo->buffer, false, |
| update->cpu_blit); |
| } else { |
| struct vmw_framebuffer_surface *vfbs = |
| container_of(update->vfb, typeof(*vfbs), base); |
| |
| ret = vmw_validation_add_resource(&val_ctx, &vfbs->surface->res, |
| 0, VMW_RES_DIRTY_NONE, NULL, |
| NULL); |
| } |
| |
| if (ret) |
| return ret; |
| |
| ret = vmw_validation_prepare(&val_ctx, update->mutex, update->intr); |
| if (ret) |
| goto out_unref; |
| |
| reserved_size = update->calc_fifo_size(update, num_hits); |
| cmd_start = VMW_CMD_RESERVE(update->dev_priv, reserved_size); |
| if (!cmd_start) { |
| ret = -ENOMEM; |
| goto out_revert; |
| } |
| |
| cmd_next = cmd_start; |
| |
| if (update->post_prepare) { |
| curr_size = update->post_prepare(update, cmd_next); |
| cmd_next += curr_size; |
| submit_size += curr_size; |
| } |
| |
| if (update->pre_clip) { |
| curr_size = update->pre_clip(update, cmd_next, num_hits); |
| cmd_next += curr_size; |
| submit_size += curr_size; |
| } |
| |
| bb.x1 = INT_MAX; |
| bb.y1 = INT_MAX; |
| bb.x2 = INT_MIN; |
| bb.y2 = INT_MIN; |
| |
| drm_atomic_helper_damage_iter_init(&iter, old_state, state); |
| drm_atomic_for_each_plane_damage(&iter, &clip) { |
| uint32_t fb_x = clip.x1; |
| uint32_t fb_y = clip.y1; |
| |
| vmw_du_translate_to_crtc(state, &clip); |
| if (update->clip) { |
| curr_size = update->clip(update, cmd_next, &clip, fb_x, |
| fb_y); |
| cmd_next += curr_size; |
| submit_size += curr_size; |
| } |
| bb.x1 = min_t(int, bb.x1, clip.x1); |
| bb.y1 = min_t(int, bb.y1, clip.y1); |
| bb.x2 = max_t(int, bb.x2, clip.x2); |
| bb.y2 = max_t(int, bb.y2, clip.y2); |
| } |
| |
| curr_size = update->post_clip(update, cmd_next, &bb); |
| submit_size += curr_size; |
| |
| if (reserved_size < submit_size) |
| submit_size = 0; |
| |
| vmw_cmd_commit(update->dev_priv, submit_size); |
| |
| vmw_kms_helper_validation_finish(update->dev_priv, NULL, &val_ctx, |
| update->out_fence, NULL); |
| return ret; |
| |
| out_revert: |
| vmw_validation_revert(&val_ctx); |
| |
| out_unref: |
| vmw_validation_unref_lists(&val_ctx); |
| return ret; |
| } |