| // SPDX-License-Identifier: GPL-2.0-only |
| // |
| // Qualcomm PMIC VBUS output regulator driver |
| // |
| // Copyright (c) 2020, The Linux Foundation. All rights reserved. |
| |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/kernel.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/regmap.h> |
| |
| #define CMD_OTG 0x40 |
| #define OTG_EN BIT(0) |
| #define OTG_CFG 0x53 |
| #define OTG_EN_SRC_CFG BIT(1) |
| |
| static const struct regulator_ops qcom_usb_vbus_reg_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| }; |
| |
| static struct regulator_desc qcom_usb_vbus_rdesc = { |
| .name = "usb_vbus", |
| .ops = &qcom_usb_vbus_reg_ops, |
| .owner = THIS_MODULE, |
| .type = REGULATOR_VOLTAGE, |
| }; |
| |
| static int qcom_usb_vbus_regulator_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct regulator_dev *rdev; |
| struct regmap *regmap; |
| struct regulator_config config = { }; |
| struct regulator_init_data *init_data; |
| int ret; |
| u32 base; |
| |
| ret = of_property_read_u32(dev->of_node, "reg", &base); |
| if (ret < 0) { |
| dev_err(dev, "no base address found\n"); |
| return ret; |
| } |
| |
| regmap = dev_get_regmap(dev->parent, NULL); |
| if (!regmap) { |
| dev_err(dev, "Failed to get regmap\n"); |
| return -ENOENT; |
| } |
| |
| init_data = of_get_regulator_init_data(dev, dev->of_node, |
| &qcom_usb_vbus_rdesc); |
| if (!init_data) |
| return -ENOMEM; |
| |
| qcom_usb_vbus_rdesc.enable_reg = base + CMD_OTG; |
| qcom_usb_vbus_rdesc.enable_mask = OTG_EN; |
| config.dev = dev; |
| config.init_data = init_data; |
| config.regmap = regmap; |
| |
| rdev = devm_regulator_register(dev, &qcom_usb_vbus_rdesc, &config); |
| if (IS_ERR(rdev)) { |
| ret = PTR_ERR(rdev); |
| dev_err(dev, "not able to register vbus reg %d\n", ret); |
| return ret; |
| } |
| |
| /* Disable HW logic for VBUS enable */ |
| regmap_update_bits(regmap, base + OTG_CFG, OTG_EN_SRC_CFG, 0); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id qcom_usb_vbus_regulator_match[] = { |
| { .compatible = "qcom,pm8150b-vbus-reg" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, qcom_usb_vbus_regulator_match); |
| |
| static struct platform_driver qcom_usb_vbus_regulator_driver = { |
| .driver = { |
| .name = "qcom-usb-vbus-regulator", |
| .of_match_table = qcom_usb_vbus_regulator_match, |
| }, |
| .probe = qcom_usb_vbus_regulator_probe, |
| }; |
| module_platform_driver(qcom_usb_vbus_regulator_driver); |
| |
| MODULE_DESCRIPTION("Qualcomm USB vbus regulator driver"); |
| MODULE_LICENSE("GPL v2"); |