| # SPDX-License-Identifier: GPL-2.0-only |
| # ALSA PCI drivers |
| |
| menuconfig SND_PCI |
| bool "PCI sound devices" |
| depends on PCI |
| default y |
| help |
| Support for sound devices connected via the PCI bus. |
| |
| if SND_PCI |
| |
| config SND_AD1889 |
| tristate "Analog Devices AD1889" |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for the integrated AC97 sound |
| device found in particular on the Hewlett-Packard [BCJ]-xxx0 |
| class PA-RISC workstations, using the AD1819 codec. |
| |
| To compile this as a module, choose M here: the module |
| will be called snd-ad1889. |
| |
| config SND_ALS300 |
| tristate "Avance Logic ALS300/ALS300+" |
| select SND_PCM |
| select SND_AC97_CODEC |
| select SND_OPL3_LIB |
| depends on ZONE_DMA |
| help |
| Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+ |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-als300 |
| |
| config SND_ALS4000 |
| tristate "Avance Logic ALS4000" |
| depends on ISA_DMA_API |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_PCM |
| select SND_SB_COMMON |
| help |
| Say Y here to include support for soundcards based on Avance Logic |
| ALS4000 chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-als4000. |
| |
| config SND_ALI5451 |
| tristate "ALi M5451 PCI Audio Controller" |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| depends on ZONE_DMA |
| help |
| Say Y here to include support for the integrated AC97 sound |
| device on motherboards using the ALi M5451 Audio Controller |
| (M1535/M1535D/M1535+/M1535D+ south bridges). Newer chipsets |
| use the "Intel/SiS/nVidia/AMD/ALi AC97 Controller" driver. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-ali5451. |
| |
| config SND_ASIHPI |
| tristate "AudioScience ASIxxxx" |
| depends on X86 |
| select FW_LOADER |
| select SND_PCM |
| select SND_HWDEP |
| help |
| Say Y here to include support for AudioScience ASI sound cards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-asihpi. |
| |
| config SND_ATIIXP |
| tristate "ATI IXP AC97 Controller" |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for the integrated AC97 sound |
| device on motherboards with ATI chipsets (ATI IXP 150/200/250/ |
| 300/400). |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-atiixp. |
| |
| config SND_ATIIXP_MODEM |
| tristate "ATI IXP Modem" |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for the integrated MC97 modem on |
| motherboards with ATI chipsets (ATI IXP 150/200/250). |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-atiixp-modem. |
| |
| config SND_AU8810 |
| tristate "Aureal Advantage" |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for Aureal Advantage soundcards. |
| |
| Supported features: Hardware Mixer, SRC, EQ and SPDIF output. |
| 3D support code is in place, but not yet useable. For more info, |
| email the ALSA developer list, or <mjander@users.sourceforge.net>. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-au8810. |
| |
| config SND_AU8820 |
| tristate "Aureal Vortex" |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for Aureal Vortex soundcards. |
| |
| Supported features: Hardware Mixer and SRC. For more info, email |
| the ALSA developer list, or <mjander@users.sourceforge.net>. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-au8820. |
| |
| config SND_AU8830 |
| tristate "Aureal Vortex 2" |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for Aureal Vortex 2 soundcards. |
| |
| Supported features: Hardware Mixer, SRC, EQ and SPDIF output. |
| 3D support code is in place, but not yet useable. For more info, |
| email the ALSA developer list, or <mjander@users.sourceforge.net>. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-au8830. |
| |
| config SND_AW2 |
| tristate "Emagic Audiowerk 2" |
| help |
| Say Y here to include support for Emagic Audiowerk 2 soundcards. |
| |
| Supported features: Analog and SPDIF output. Analog or SPDIF input. |
| Note: Switch between analog and digital input does not always work. |
| It can produce continuous noise. The workaround is to switch again |
| (and again) between digital and analog input until it works. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-aw2. |
| |
| |
| config SND_AZT3328 |
| tristate "Aztech AZF3328 / PCI168" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_PCM |
| select SND_RAWMIDI |
| select SND_AC97_CODEC |
| select SND_TIMER |
| depends on ZONE_DMA |
| help |
| Say Y here to include support for Aztech AZF3328 (PCI168) |
| soundcards. |
| |
| Supported features: AC97-"conformant" mixer, MPU401/OPL3, analog I/O |
| (16bit/8bit, many sample rates [<= 66.2kHz], NO hardware mixing), |
| Digital Enhanced Game Port, 1.024MHz multimedia sequencer timer, |
| ext. codec (I2S port), onboard amp (4W/4Ohms/ch), suspend/resume. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-azt3328. |
| |
| config SND_BT87X |
| tristate "Bt87x Audio Capture" |
| select SND_PCM |
| help |
| If you want to record audio from TV cards based on |
| Brooktree Bt878/Bt879 chips, say Y here and read |
| <file:Documentation/sound/cards/bt87x.rst>. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-bt87x. |
| |
| config SND_BT87X_OVERCLOCK |
| bool "Bt87x Audio overclocking" |
| depends on SND_BT87X |
| help |
| Say Y here if 448000 Hz isn't enough for you and you want to |
| record from the analog input with up to 1792000 Hz. |
| |
| Higher sample rates won't hurt your hardware, but audio |
| quality may suffer. |
| |
| config SND_CA0106 |
| tristate "SB Audigy LS / Live 24bit" |
| select SND_AC97_CODEC |
| select SND_RAWMIDI |
| select SND_VMASTER |
| help |
| Say Y here to include support for the Sound Blaster Audigy LS |
| and Live 24bit. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-ca0106. |
| |
| config SND_CMIPCI |
| tristate "C-Media 8338, 8738, 8768, 8770" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_PCM |
| help |
| If you want to use soundcards based on C-Media CMI8338, CMI8738, |
| CMI8768 or CMI8770 chips, say Y here and read |
| <file:Documentation/sound/cards/cmipci.rst>. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-cmipci. |
| |
| config SND_OXYGEN_LIB |
| tristate |
| |
| config SND_OXYGEN |
| tristate "C-Media 8786, 8787, 8788 (Oxygen)" |
| select SND_OXYGEN_LIB |
| select SND_PCM |
| select SND_MPU401_UART |
| help |
| Say Y here to include support for sound cards based on the |
| C-Media CMI8788 (Oxygen HD Audio) chip: |
| * Asound A-8788 |
| * Asus Xonar DG/DGX |
| * AuzenTech X-Meridian |
| * AuzenTech X-Meridian 2G |
| * Bgears b-Enspirer |
| * Club3D Theatron DTS |
| * HT-Omega Claro (plus) |
| * HT-Omega Claro halo (XT) |
| * Kuroutoshikou CMI8787-HG2PCI |
| * Razer Barracuda AC-1 |
| * Sondigo Inferno |
| * TempoTec/MediaTek HiFier Fantasia |
| * TempoTec/MediaTek HiFier Serenade |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-oxygen. |
| |
| config SND_CS4281 |
| tristate "Cirrus Logic (Sound Fusion) CS4281" |
| select SND_OPL3_LIB |
| select SND_RAWMIDI |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for Cirrus Logic CS4281 chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-cs4281. |
| |
| config SND_CS46XX |
| tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x" |
| select SND_RAWMIDI |
| select SND_AC97_CODEC |
| select FW_LOADER |
| help |
| Say Y here to include support for Cirrus Logic CS4610/CS4612/ |
| CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-cs46xx. |
| |
| config SND_CS46XX_NEW_DSP |
| bool "Cirrus Logic (Sound Fusion) New DSP support" |
| depends on SND_CS46XX |
| default y |
| help |
| Say Y here to use a new DSP image for SPDIF and dual codecs. |
| |
| This works better than the old code, so say Y. |
| |
| config SND_CS5530 |
| tristate "CS5530 Audio" |
| depends on ISA_DMA_API && (X86_32 || COMPILE_TEST) |
| depends on !M68K |
| select SND_SB16_DSP |
| help |
| Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-cs5530. |
| |
| config SND_CS5535AUDIO |
| tristate "CS5535/CS5536 Audio" |
| depends on X86_32 || MIPS || COMPILE_TEST |
| select SND_PCM |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for audio on CS5535 chips. It is |
| referred to as NS CS5535 IO or AMD CS5535 IO companion in |
| various literature. This driver also supports the CS5536 audio |
| device. However, for both chips, on certain boards, you may |
| need to use ac97_quirk=hp_only if your board has physically |
| mapped headphone out to master output. If that works for you, |
| send lspci -vvv output to the mailing list so that your board |
| can be identified in the quirks list. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-cs5535audio. |
| |
| config SND_CTXFI |
| tristate "Creative Sound Blaster X-Fi" |
| select SND_PCM |
| help |
| If you want to use soundcards based on Creative Sound Blastr X-Fi |
| boards with 20k1 or 20k2 chips, say Y here. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-ctxfi. |
| |
| config SND_DARLA20 |
| tristate "(Echoaudio) Darla20" |
| select FW_LOADER |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Darla. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-darla20 |
| |
| config SND_GINA20 |
| tristate "(Echoaudio) Gina20" |
| select FW_LOADER |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Gina. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-gina20 |
| |
| config SND_LAYLA20 |
| tristate "(Echoaudio) Layla20" |
| select FW_LOADER |
| select SND_RAWMIDI |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Layla. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-layla20 |
| |
| config SND_DARLA24 |
| tristate "(Echoaudio) Darla24" |
| select FW_LOADER |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Darla24. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-darla24 |
| |
| config SND_GINA24 |
| tristate "(Echoaudio) Gina24" |
| select FW_LOADER |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Gina24. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-gina24 |
| |
| config SND_LAYLA24 |
| tristate "(Echoaudio) Layla24" |
| select FW_LOADER |
| select SND_RAWMIDI |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Layla24. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-layla24 |
| |
| config SND_MONA |
| tristate "(Echoaudio) Mona" |
| select FW_LOADER |
| select SND_RAWMIDI |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Mona. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-mona |
| |
| config SND_MIA |
| tristate "(Echoaudio) Mia" |
| select FW_LOADER |
| select SND_RAWMIDI |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Mia and Mia-midi. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-mia |
| |
| config SND_ECHO3G |
| tristate "(Echoaudio) 3G cards" |
| select FW_LOADER |
| select SND_RAWMIDI |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Gina3G and Layla3G. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-echo3g |
| |
| config SND_INDIGO |
| tristate "(Echoaudio) Indigo" |
| select FW_LOADER |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Indigo. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-indigo |
| |
| config SND_INDIGOIO |
| tristate "(Echoaudio) Indigo IO" |
| select FW_LOADER |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Indigo IO. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-indigoio |
| |
| config SND_INDIGODJ |
| tristate "(Echoaudio) Indigo DJ" |
| select FW_LOADER |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Indigo DJ. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-indigodj |
| |
| config SND_INDIGOIOX |
| tristate "(Echoaudio) Indigo IOx" |
| select FW_LOADER |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Indigo IOx. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-indigoiox |
| |
| config SND_INDIGODJX |
| tristate "(Echoaudio) Indigo DJx" |
| select FW_LOADER |
| select SND_PCM |
| help |
| Say 'Y' or 'M' to include support for Echoaudio Indigo DJx. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-indigodjx |
| |
| config SND_EMU10K1 |
| tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)" |
| select FW_LOADER |
| select SND_HWDEP |
| select SND_RAWMIDI |
| select SND_AC97_CODEC |
| select SND_TIMER |
| select SND_SEQ_DEVICE if SND_SEQUENCER != n |
| depends on ZONE_DMA |
| help |
| Say Y to include support for Sound Blaster PCI 512, Live!, |
| Audigy and E-mu APS (partially supported) soundcards. |
| |
| The confusing multitude of mixer controls is documented in |
| <file:Documentation/sound/cards/sb-live-mixer.rst> and |
| <file:Documentation/sound/cards/audigy-mixer.rst>. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-emu10k1. |
| |
| # select SEQ stuff to min(SND_SEQUENCER,SND_XXX) |
| config SND_EMU10K1_SEQ |
| def_tristate SND_SEQUENCER && SND_EMU10K1 |
| select SND_SEQ_MIDI_EMUL |
| select SND_SEQ_VIRMIDI |
| select SND_SYNTH_EMUX |
| |
| config SND_EMU10K1X |
| tristate "Emu10k1X (Dell OEM Version)" |
| select SND_AC97_CODEC |
| select SND_RAWMIDI |
| depends on ZONE_DMA |
| help |
| Say Y here to include support for the Dell OEM version of the |
| Sound Blaster Live!. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-emu10k1x. |
| |
| config SND_ENS1370 |
| tristate "(Creative) Ensoniq AudioPCI 1370" |
| select SND_RAWMIDI |
| select SND_PCM |
| help |
| Say Y here to include support for Ensoniq AudioPCI ES1370 chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-ens1370. |
| |
| config SND_ENS1371 |
| tristate "(Creative) Ensoniq AudioPCI 1371/1373" |
| select SND_RAWMIDI |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for Ensoniq AudioPCI ES1371 chips and |
| Sound Blaster PCI 64 or 128 soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-ens1371. |
| |
| config SND_ES1938 |
| tristate "ESS ES1938/1946/1969 (Solo-1)" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| depends on ZONE_DMA |
| help |
| Say Y here to include support for soundcards based on ESS Solo-1 |
| (ES1938, ES1946, ES1969) chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-es1938. |
| |
| config SND_ES1968 |
| tristate "ESS ES1968/1978 (Maestro-1/2/2E)" |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| depends on ZONE_DMA |
| help |
| Say Y here to include support for soundcards based on ESS Maestro |
| 1/2/2E chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-es1968. |
| |
| config SND_ES1968_INPUT |
| bool "Enable input device for es1968 volume buttons" |
| depends on SND_ES1968 |
| depends on INPUT=y || INPUT=SND_ES1968 |
| help |
| If you say Y here, you will get an input device which reports |
| keypresses for the volume buttons connected to the es1968 chip. |
| If you say N the buttons will directly control the master volume. |
| It is recommended to say Y. |
| |
| config SND_ES1968_RADIO |
| bool "Enable TEA5757 radio tuner support for es1968" |
| depends on SND_ES1968 |
| depends on MEDIA_RADIO_SUPPORT |
| depends on VIDEO_DEV=y || VIDEO_DEV=SND_ES1968 |
| select RADIO_ADAPTERS |
| select RADIO_TEA575X |
| |
| help |
| Say Y here to include support for TEA5757 radio tuner integrated on |
| some MediaForte cards (e.g. SF64-PCE2). |
| |
| config SND_FM801 |
| tristate "ForteMedia FM801" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for soundcards based on the ForteMedia |
| FM801 chip. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-fm801. |
| |
| config SND_FM801_TEA575X_BOOL |
| bool "ForteMedia FM801 + TEA5757 tuner" |
| depends on SND_FM801 |
| depends on MEDIA_RADIO_SUPPORT |
| depends on VIDEO_DEV=y || VIDEO_DEV=SND_FM801 |
| select RADIO_ADAPTERS |
| select RADIO_TEA575X |
| help |
| Say Y here to include support for soundcards based on the ForteMedia |
| FM801 chip with a TEA5757 tuner (MediaForte SF256-PCS, SF256-PCP and |
| SF64-PCR) into the snd-fm801 driver. |
| |
| config SND_HDSP |
| tristate "RME Hammerfall DSP Audio" |
| select FW_LOADER |
| select SND_HWDEP |
| select SND_RAWMIDI |
| select SND_PCM |
| help |
| Say Y here to include support for RME Hammerfall DSP Audio |
| soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-hdsp. |
| |
| comment "Don't forget to add built-in firmwares for HDSP driver" |
| depends on SND_HDSP=y |
| |
| config SND_HDSPM |
| tristate "RME Hammerfall DSP MADI/RayDAT/AIO" |
| select SND_HWDEP |
| select SND_RAWMIDI |
| select SND_PCM |
| help |
| Say Y here to include support for RME Hammerfall DSP MADI, |
| RayDAT and AIO soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-hdspm. |
| |
| config SND_ICE1712 |
| tristate "ICEnsemble ICE1712 (Envy24)" |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| select BITREVERSE |
| depends on ZONE_DMA |
| help |
| Say Y here to include support for soundcards based on the |
| ICE1712 (Envy24) chip. |
| |
| Currently supported hardware is: M-Audio Delta 1010(LT), |
| DiO 2496, 66, 44, 410, Audiophile 24/96; Digigram VX442; |
| TerraTec EWX 24/96, EWS 88MT/D, DMX 6Fire, Phase 88; |
| Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8; |
| Lionstracs Mediastation, Terrasoniq TS 88. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-ice1712. |
| |
| config SND_ICE1724 |
| tristate "ICE/VT1724/1720 (Envy24HT/PT)" |
| select SND_RAWMIDI |
| select SND_AC97_CODEC |
| select SND_VMASTER |
| help |
| Say Y here to include support for soundcards based on |
| ICE/VT1724/1720 (Envy24HT/PT) chips. |
| |
| Currently supported hardware is: AMP AUDIO2000; M-Audio |
| Revolution 5.1, 7.1, Audiophile 192; TerraTec Aureon 5.1 Sky, |
| 7.1 Space/Universe, Phase 22/28; Onkyo SE-90PCI, SE-200PCI; |
| AudioTrak Prodigy 192, 7.1 (HIFI/LT/XT), HD2; Hercules |
| Fortissimo IV; ESI Juli@; Pontis MS300; EGO-SYS WaveTerminal |
| 192M; Albatron K8X800 Pro II; Chaintech ZNF3-150/250, 9CJS, |
| AV-710; Shuttle SN25P; Philips PSC724 Ultimate Edge. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-ice1724. |
| |
| config SND_INTEL8X0 |
| tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller" |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for the integrated AC97 sound |
| device on motherboards with Intel/SiS/nVidia/AMD chipsets, or |
| ALi chipsets using the M5455 Audio Controller. (There is a |
| separate driver for ALi M5451 Audio Controllers.) |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-intel8x0. |
| |
| config SND_INTEL8X0M |
| tristate "Intel/SiS/nVidia/AMD MC97 Modem" |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for the integrated MC97 modem on |
| motherboards with Intel/SiS/nVidia/AMD chipsets. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-intel8x0m. |
| |
| config SND_KORG1212 |
| tristate "Korg 1212 IO" |
| select SND_PCM |
| help |
| Say Y here to include support for Korg 1212IO soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-korg1212. |
| |
| config SND_LOLA |
| tristate "Digigram Lola" |
| select SND_PCM |
| help |
| Say Y to include support for Digigram Lola boards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-lola. |
| |
| config SND_LX6464ES |
| tristate "Digigram LX6464ES" |
| depends on HAS_IOPORT_MAP |
| select SND_PCM |
| help |
| Say Y here to include support for Digigram LX6464ES boards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-lx6464es. |
| |
| |
| config SND_MAESTRO3 |
| tristate "ESS Allegro/Maestro3" |
| select SND_AC97_CODEC |
| depends on ZONE_DMA |
| help |
| Say Y here to include support for soundcards based on ESS Maestro 3 |
| (Allegro) chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-maestro3. |
| |
| config SND_MAESTRO3_INPUT |
| bool "Enable input device for maestro3 volume buttons" |
| depends on SND_MAESTRO3 |
| depends on INPUT=y || INPUT=SND_MAESTRO3 |
| help |
| If you say Y here, you will get an input device which reports |
| keypresses for the volume buttons connected to the maestro3 chip. |
| If you say N the buttons will directly control the master volume. |
| It is recommended to say Y. |
| |
| config SND_MIXART |
| tristate "Digigram miXart" |
| select FW_LOADER |
| select SND_HWDEP |
| select SND_PCM |
| help |
| If you want to use Digigram miXart soundcards, say Y here and |
| read <file:Documentation/sound/cards/mixart.rst>. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-mixart. |
| |
| config SND_NM256 |
| tristate "NeoMagic NM256AV/ZX" |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for NeoMagic NM256AV/ZX chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-nm256. |
| |
| config SND_PCXHR |
| tristate "Digigram PCXHR" |
| select FW_LOADER |
| select SND_PCM |
| select SND_HWDEP |
| help |
| Say Y here to include support for Digigram PCXHR boards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-pcxhr. |
| |
| config SND_RIPTIDE |
| tristate "Conexant Riptide" |
| select FW_LOADER |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| help |
| Say 'Y' or 'M' to include support for Conexant Riptide chip. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-riptide |
| |
| config SND_RME32 |
| tristate "RME Digi32, 32/8, 32 PRO" |
| select SND_PCM |
| help |
| Say Y to include support for RME Digi32, Digi32 PRO and |
| Digi32/8 (Sek'd Prodif32, Prodif96 and Prodif Gold) audio |
| devices. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-rme32. |
| |
| config SND_RME96 |
| tristate "RME Digi96, 96/8, 96/8 PRO" |
| select SND_PCM |
| help |
| Say Y here to include support for RME Digi96, Digi96/8 and |
| Digi96/8 PRO/PAD/PST soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-rme96. |
| |
| config SND_RME9652 |
| tristate "RME Digi9652 (Hammerfall)" |
| select SND_PCM |
| help |
| Say Y here to include support for RME Hammerfall (RME |
| Digi9652/Digi9636) soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-rme9652. |
| |
| config SND_SE6X |
| tristate "Studio Evolution SE6X" |
| depends on SND_OXYGEN=n && SND_VIRTUOSO=n # PCI ID conflict |
| select SND_OXYGEN_LIB |
| select SND_PCM |
| select SND_MPU401_UART |
| help |
| Say Y or M here only if you actually have this sound card. |
| |
| config SND_SIS7019 |
| tristate "SiS 7019 Audio Accelerator" |
| depends on X86_32 |
| select SND_AC97_CODEC |
| depends on ZONE_DMA |
| help |
| Say Y here to include support for the SiS 7019 Audio Accelerator. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-sis7019. |
| |
| config SND_SONICVIBES |
| tristate "S3 SonicVibes" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| depends on ZONE_DMA |
| help |
| Say Y here to include support for soundcards based on the S3 |
| SonicVibes chip. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-sonicvibes. |
| |
| config SND_TRIDENT |
| tristate "Trident 4D-Wave DX/NX; SiS 7018" |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| depends on ZONE_DMA |
| help |
| Say Y here to include support for soundcards based on Trident |
| 4D-Wave DX/NX or SiS 7018 chips. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-trident. |
| |
| config SND_VIA82XX |
| tristate "VIA 82C686A/B, 8233/8235 AC97 Controller" |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for the integrated AC97 sound |
| device on motherboards with VIA chipsets. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-via82xx. |
| |
| config SND_VIA82XX_MODEM |
| tristate "VIA 82C686A/B, 8233 based Modems" |
| select SND_AC97_CODEC |
| help |
| Say Y here to include support for the integrated MC97 modem on |
| motherboards with VIA chipsets. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-via82xx-modem. |
| |
| config SND_VIRTUOSO |
| tristate "Asus Virtuoso 66/100/200 (Xonar)" |
| select SND_OXYGEN_LIB |
| select SND_PCM |
| select SND_MPU401_UART |
| select SND_JACK |
| help |
| Say Y here to include support for sound cards based on the |
| Asus AV66/AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X, DS, DSX, |
| Essence ST (Deluxe), and Essence STX (II). |
| Support for the HDAV1.3 (Deluxe) and HDAV1.3 Slim is experimental; |
| for the Xense, missing. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-virtuoso. |
| |
| config SND_VX222 |
| tristate "Digigram VX222" |
| select SND_VX_LIB |
| help |
| Say Y here to include support for Digigram VX222 soundcards. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-vx222. |
| |
| config SND_YMFPCI |
| tristate "Yamaha YMF724/740/744/754" |
| select SND_OPL3_LIB |
| select SND_MPU401_UART |
| select SND_AC97_CODEC |
| select SND_TIMER |
| help |
| Say Y here to include support for Yamaha PCI audio chips - |
| YMF724, YMF724F, YMF740, YMF740C, YMF744, YMF754. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-ymfpci. |
| |
| endif # SND_PCI |
| |
| source "sound/pci/hda/Kconfig" |
