blob: 59b69c8ab5e1f5ef37d9953ca189110662bf2754 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0 */
/*
* S390 low-level entry points.
*
* Copyright IBM Corp. 1999, 2012
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
* Hartmut Penner (hp@de.ibm.com),
* Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/asm-extable.h>
#include <asm/alternative-asm.h>
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/dwarf.h>
#include <asm/errno.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
#include <asm/page.h>
#include <asm/sigp.h>
#include <asm/irq.h>
#include <asm/vx-insn.h>
#include <asm/setup.h>
#include <asm/nmi.h>
#include <asm/export.h>
#include <asm/nospec-insn.h>
__PT_R0 = __PT_GPRS
__PT_R1 = __PT_GPRS + 8
__PT_R2 = __PT_GPRS + 16
__PT_R3 = __PT_GPRS + 24
__PT_R4 = __PT_GPRS + 32
__PT_R5 = __PT_GPRS + 40
__PT_R6 = __PT_GPRS + 48
__PT_R7 = __PT_GPRS + 56
__PT_R8 = __PT_GPRS + 64
__PT_R9 = __PT_GPRS + 72
__PT_R10 = __PT_GPRS + 80
__PT_R11 = __PT_GPRS + 88
__PT_R12 = __PT_GPRS + 96
__PT_R13 = __PT_GPRS + 104
__PT_R14 = __PT_GPRS + 112
__PT_R15 = __PT_GPRS + 120
STACK_SHIFT = PAGE_SHIFT + THREAD_SIZE_ORDER
STACK_SIZE = 1 << STACK_SHIFT
STACK_INIT = STACK_SIZE - STACK_FRAME_OVERHEAD - __PT_SIZE
_LPP_OFFSET = __LC_LPP
.macro STBEAR address
ALTERNATIVE "", ".insn s,0xb2010000,\address", 193
.endm
.macro LBEAR address
ALTERNATIVE "", ".insn s,0xb2000000,\address", 193
.endm
.macro LPSWEY address,lpswe
ALTERNATIVE "b \lpswe", ".insn siy,0xeb0000000071,\address,0", 193
.endm
.macro MBEAR reg
ALTERNATIVE "", __stringify(mvc __PT_LAST_BREAK(8,\reg),__LC_LAST_BREAK), 193
.endm
.macro CHECK_STACK savearea
#ifdef CONFIG_CHECK_STACK
tml %r15,STACK_SIZE - CONFIG_STACK_GUARD
lghi %r14,\savearea
jz stack_overflow
#endif
.endm
.macro CHECK_VMAP_STACK savearea,oklabel
#ifdef CONFIG_VMAP_STACK
lgr %r14,%r15
nill %r14,0x10000 - STACK_SIZE
oill %r14,STACK_INIT
clg %r14,__LC_KERNEL_STACK
je \oklabel
clg %r14,__LC_ASYNC_STACK
je \oklabel
clg %r14,__LC_MCCK_STACK
je \oklabel
clg %r14,__LC_NODAT_STACK
je \oklabel
clg %r14,__LC_RESTART_STACK
je \oklabel
lghi %r14,\savearea
j stack_overflow
#else
j \oklabel
#endif
.endm
/*
* The TSTMSK macro generates a test-under-mask instruction by
* calculating the memory offset for the specified mask value.
* Mask value can be any constant. The macro shifts the mask
* value to calculate the memory offset for the test-under-mask
* instruction.
*/
.macro TSTMSK addr, mask, size=8, bytepos=0
.if (\bytepos < \size) && (\mask >> 8)
.if (\mask & 0xff)
.error "Mask exceeds byte boundary"
.endif
TSTMSK \addr, "(\mask >> 8)", \size, "(\bytepos + 1)"
.exitm
.endif
.ifeq \mask
.error "Mask must not be zero"
.endif
off = \size - \bytepos - 1
tm off+\addr, \mask
.endm
.macro BPOFF
ALTERNATIVE "", ".insn rrf,0xb2e80000,0,0,12,0", 82
.endm
.macro BPON
ALTERNATIVE "", ".insn rrf,0xb2e80000,0,0,13,0", 82
.endm
.macro BPENTER tif_ptr,tif_mask
ALTERNATIVE "TSTMSK \tif_ptr,\tif_mask; jz .+8; .insn rrf,0xb2e80000,0,0,13,0", \
"", 82
.endm
.macro BPEXIT tif_ptr,tif_mask
TSTMSK \tif_ptr,\tif_mask
ALTERNATIVE "jz .+8; .insn rrf,0xb2e80000,0,0,12,0", \
"jnz .+8; .insn rrf,0xb2e80000,0,0,13,0", 82
.endm
/*
* The CHKSTG macro jumps to the provided label in case the
* machine check interruption code reports one of unrecoverable
* storage errors:
* - Storage error uncorrected
* - Storage key error uncorrected
* - Storage degradation with Failing-storage-address validity
*/
.macro CHKSTG errlabel
TSTMSK __LC_MCCK_CODE,(MCCK_CODE_STG_ERROR|MCCK_CODE_STG_KEY_ERROR)
jnz \errlabel
TSTMSK __LC_MCCK_CODE,MCCK_CODE_STG_DEGRAD
jz .Loklabel\@
TSTMSK __LC_MCCK_CODE,MCCK_CODE_STG_FAIL_ADDR
jnz \errlabel
.Loklabel\@:
.endm
#if IS_ENABLED(CONFIG_KVM)
/*
* The OUTSIDE macro jumps to the provided label in case the value
* in the provided register is outside of the provided range. The
* macro is useful for checking whether a PSW stored in a register
* pair points inside or outside of a block of instructions.
* @reg: register to check
* @start: start of the range
* @end: end of the range
* @outside_label: jump here if @reg is outside of [@start..@end)
*/
.macro OUTSIDE reg,start,end,outside_label
lgr %r14,\reg
larl %r13,\start
slgr %r14,%r13
lghi %r13,\end - \start
clgr %r14,%r13
jhe \outside_label
.endm
.macro SIEEXIT
lg %r9,__SF_SIE_CONTROL(%r15) # get control block pointer
ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE
lctlg %c1,%c1,__LC_KERNEL_ASCE # load primary asce
larl %r9,sie_exit # skip forward to sie_exit
.endm
#endif
GEN_BR_THUNK %r14
.section .kprobes.text, "ax"
.Ldummy:
/*
* This nop exists only in order to avoid that __bpon starts at
* the beginning of the kprobes text section. In that case we would
* have several symbols at the same address. E.g. objdump would take
* an arbitrary symbol name when disassembling this code.
* With the added nop in between the __bpon symbol is unique
* again.
*/
nop 0
ENTRY(__bpon)
.globl __bpon
BPON
BR_EX %r14
ENDPROC(__bpon)
/*
* Scheduler resume function, called by switch_to
* gpr2 = (task_struct *) prev
* gpr3 = (task_struct *) next
* Returns:
* gpr2 = prev
*/
ENTRY(__switch_to)
stmg %r6,%r15,__SF_GPRS(%r15) # store gprs of prev task
lghi %r4,__TASK_stack
lghi %r1,__TASK_thread
llill %r5,STACK_INIT
stg %r15,__THREAD_ksp(%r1,%r2) # store kernel stack of prev
lg %r15,0(%r4,%r3) # start of kernel stack of next
agr %r15,%r5 # end of kernel stack of next
stg %r3,__LC_CURRENT # store task struct of next
stg %r15,__LC_KERNEL_STACK # store end of kernel stack
lg %r15,__THREAD_ksp(%r1,%r3) # load kernel stack of next
aghi %r3,__TASK_pid
mvc __LC_CURRENT_PID(4,%r0),0(%r3) # store pid of next
lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task
ALTERNATIVE "", "lpp _LPP_OFFSET", 40
BR_EX %r14
ENDPROC(__switch_to)
#if IS_ENABLED(CONFIG_KVM)
/*
* sie64a calling convention:
* %r2 pointer to sie control block
* %r3 guest register save area
*/
ENTRY(sie64a)
stmg %r6,%r14,__SF_GPRS(%r15) # save kernel registers
lg %r12,__LC_CURRENT
stg %r2,__SF_SIE_CONTROL(%r15) # save control block pointer
stg %r3,__SF_SIE_SAVEAREA(%r15) # save guest register save area
xc __SF_SIE_REASON(8,%r15),__SF_SIE_REASON(%r15) # reason code = 0
mvc __SF_SIE_FLAGS(8,%r15),__TI_flags(%r12) # copy thread flags
lmg %r0,%r13,0(%r3) # load guest gprs 0-13
lg %r14,__LC_GMAP # get gmap pointer
ltgr %r14,%r14
jz .Lsie_gmap
lctlg %c1,%c1,__GMAP_ASCE(%r14) # load primary asce
.Lsie_gmap:
lg %r14,__SF_SIE_CONTROL(%r15) # get control block pointer
oi __SIE_PROG0C+3(%r14),1 # we are going into SIE now
tm __SIE_PROG20+3(%r14),3 # last exit...
jnz .Lsie_skip
TSTMSK __LC_CPU_FLAGS,_CIF_FPU
jo .Lsie_skip # exit if fp/vx regs changed
BPEXIT __SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
.Lsie_entry:
sie 0(%r14)
BPOFF
BPENTER __SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
.Lsie_skip:
ni __SIE_PROG0C+3(%r14),0xfe # no longer in SIE
lctlg %c1,%c1,__LC_KERNEL_ASCE # load primary asce
.Lsie_done:
# some program checks are suppressing. C code (e.g. do_protection_exception)
# will rewind the PSW by the ILC, which is often 4 bytes in case of SIE. There
# are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable.
# Other instructions between sie64a and .Lsie_done should not cause program
# interrupts. So lets use 3 nops as a landing pad for all possible rewinds.
.Lrewind_pad6:
nopr 7
.Lrewind_pad4:
nopr 7
.Lrewind_pad2:
nopr 7
.globl sie_exit
sie_exit:
lg %r14,__SF_SIE_SAVEAREA(%r15) # load guest register save area
stmg %r0,%r13,0(%r14) # save guest gprs 0-13
xgr %r0,%r0 # clear guest registers to
xgr %r1,%r1 # prevent speculative use
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
lmg %r6,%r14,__SF_GPRS(%r15) # restore kernel registers
lg %r2,__SF_SIE_REASON(%r15) # return exit reason code
BR_EX %r14
.Lsie_fault:
lghi %r14,-EFAULT
stg %r14,__SF_SIE_REASON(%r15) # set exit reason code
j sie_exit
EX_TABLE(.Lrewind_pad6,.Lsie_fault)
EX_TABLE(.Lrewind_pad4,.Lsie_fault)
EX_TABLE(.Lrewind_pad2,.Lsie_fault)
EX_TABLE(sie_exit,.Lsie_fault)
ENDPROC(sie64a)
EXPORT_SYMBOL(sie64a)
EXPORT_SYMBOL(sie_exit)
#endif
/*
* SVC interrupt handler routine. System calls are synchronous events and
* are entered with interrupts disabled.
*/
ENTRY(system_call)
stpt __LC_SYS_ENTER_TIMER
stmg %r8,%r15,__LC_SAVE_AREA_SYNC
BPOFF
lghi %r14,0
.Lsysc_per:
STBEAR __LC_LAST_BREAK
lctlg %c1,%c1,__LC_KERNEL_ASCE
lg %r12,__LC_CURRENT
lg %r15,__LC_KERNEL_STACK
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
stmg %r0,%r7,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
# clear user controlled register to prevent speculative use
xgr %r0,%r0
xgr %r1,%r1
xgr %r4,%r4
xgr %r5,%r5
xgr %r6,%r6
xgr %r7,%r7
xgr %r8,%r8
xgr %r9,%r9
xgr %r10,%r10
xgr %r11,%r11
la %r2,STACK_FRAME_OVERHEAD(%r15) # pointer to pt_regs
mvc __PT_R8(64,%r2),__LC_SAVE_AREA_SYNC
MBEAR %r2
lgr %r3,%r14
brasl %r14,__do_syscall
lctlg %c1,%c1,__LC_USER_ASCE
mvc __LC_RETURN_PSW(16),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
BPEXIT __TI_flags(%r12),_TIF_ISOLATE_BP
LBEAR STACK_FRAME_OVERHEAD+__PT_LAST_BREAK(%r15)
lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
stpt __LC_EXIT_TIMER
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
ENDPROC(system_call)
#
# a new process exits the kernel with ret_from_fork
#
ENTRY(ret_from_fork)
lgr %r3,%r11
brasl %r14,__ret_from_fork
lctlg %c1,%c1,__LC_USER_ASCE
mvc __LC_RETURN_PSW(16),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
BPEXIT __TI_flags(%r12),_TIF_ISOLATE_BP
LBEAR STACK_FRAME_OVERHEAD+__PT_LAST_BREAK(%r15)
lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
stpt __LC_EXIT_TIMER
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
ENDPROC(ret_from_fork)
/*
* Program check handler routine
*/
ENTRY(pgm_check_handler)
stpt __LC_SYS_ENTER_TIMER
BPOFF
stmg %r8,%r15,__LC_SAVE_AREA_SYNC
lg %r12,__LC_CURRENT
lghi %r10,0
lmg %r8,%r9,__LC_PGM_OLD_PSW
tmhh %r8,0x0001 # coming from user space?
jno .Lpgm_skip_asce
lctlg %c1,%c1,__LC_KERNEL_ASCE
j 3f # -> fault in user space
.Lpgm_skip_asce:
#if IS_ENABLED(CONFIG_KVM)
# cleanup critical section for program checks in sie64a
OUTSIDE %r9,.Lsie_gmap,.Lsie_done,1f
SIEEXIT
lghi %r10,_PIF_GUEST_FAULT
#endif
1: tmhh %r8,0x4000 # PER bit set in old PSW ?
jnz 2f # -> enabled, can't be a double fault
tm __LC_PGM_ILC+3,0x80 # check for per exception
jnz .Lpgm_svcper # -> single stepped svc
2: CHECK_STACK __LC_SAVE_AREA_SYNC
aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
# CHECK_VMAP_STACK branches to stack_overflow or 4f
CHECK_VMAP_STACK __LC_SAVE_AREA_SYNC,4f
3: BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
lg %r15,__LC_KERNEL_STACK
4: la %r11,STACK_FRAME_OVERHEAD(%r15)
stg %r10,__PT_FLAGS(%r11)
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
stmg %r0,%r7,__PT_R0(%r11)
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
mvc __PT_LAST_BREAK(8,%r11),__LC_PGM_LAST_BREAK
stmg %r8,%r9,__PT_PSW(%r11)
# clear user controlled registers to prevent speculative use
xgr %r0,%r0
xgr %r1,%r1
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
xgr %r6,%r6
xgr %r7,%r7
lgr %r2,%r11
brasl %r14,__do_pgm_check
tmhh %r8,0x0001 # returning to user space?
jno .Lpgm_exit_kernel
lctlg %c1,%c1,__LC_USER_ASCE
BPEXIT __TI_flags(%r12),_TIF_ISOLATE_BP
stpt __LC_EXIT_TIMER
.Lpgm_exit_kernel:
mvc __LC_RETURN_PSW(16),STACK_FRAME_OVERHEAD+__PT_PSW(%r15)
LBEAR STACK_FRAME_OVERHEAD+__PT_LAST_BREAK(%r15)
lmg %r0,%r15,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
#
# single stepped system call
#
.Lpgm_svcper:
mvc __LC_RETURN_PSW(8),__LC_SVC_NEW_PSW
larl %r14,.Lsysc_per
stg %r14,__LC_RETURN_PSW+8
lghi %r14,1
LBEAR __LC_PGM_LAST_BREAK
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE # branch to .Lsysc_per
ENDPROC(pgm_check_handler)
/*
* Interrupt handler macro used for external and IO interrupts.
*/
.macro INT_HANDLER name,lc_old_psw,handler
ENTRY(\name)
stckf __LC_INT_CLOCK
stpt __LC_SYS_ENTER_TIMER
STBEAR __LC_LAST_BREAK
BPOFF
stmg %r8,%r15,__LC_SAVE_AREA_ASYNC
lg %r12,__LC_CURRENT
lmg %r8,%r9,\lc_old_psw
tmhh %r8,0x0001 # interrupting from user ?
jnz 1f
#if IS_ENABLED(CONFIG_KVM)
OUTSIDE %r9,.Lsie_gmap,.Lsie_done,0f
BPENTER __SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
SIEEXIT
#endif
0: CHECK_STACK __LC_SAVE_AREA_ASYNC
aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE)
j 2f
1: BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
lctlg %c1,%c1,__LC_KERNEL_ASCE
lg %r15,__LC_KERNEL_STACK
2: xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
la %r11,STACK_FRAME_OVERHEAD(%r15)
stmg %r0,%r7,__PT_R0(%r11)
# clear user controlled registers to prevent speculative use
xgr %r0,%r0
xgr %r1,%r1
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
xgr %r6,%r6
xgr %r7,%r7
xgr %r10,%r10
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC
MBEAR %r11
stmg %r8,%r9,__PT_PSW(%r11)
tm %r8,0x0001 # coming from user space?
jno 1f
lctlg %c1,%c1,__LC_KERNEL_ASCE
1: lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,\handler
mvc __LC_RETURN_PSW(16),__PT_PSW(%r11)
tmhh %r8,0x0001 # returning to user ?
jno 2f
lctlg %c1,%c1,__LC_USER_ASCE
BPEXIT __TI_flags(%r12),_TIF_ISOLATE_BP
stpt __LC_EXIT_TIMER
2: LBEAR __PT_LAST_BREAK(%r11)
lmg %r0,%r15,__PT_R0(%r11)
LPSWEY __LC_RETURN_PSW,__LC_RETURN_LPSWE
ENDPROC(\name)
.endm
INT_HANDLER ext_int_handler,__LC_EXT_OLD_PSW,do_ext_irq
INT_HANDLER io_int_handler,__LC_IO_OLD_PSW,do_io_irq
/*
* Load idle PSW.
*/
ENTRY(psw_idle)
stg %r14,(__SF_GPRS+8*8)(%r15)
stg %r3,__SF_EMPTY(%r15)
larl %r1,psw_idle_exit
stg %r1,__SF_EMPTY+8(%r15)
larl %r1,smp_cpu_mtid
llgf %r1,0(%r1)
ltgr %r1,%r1
jz .Lpsw_idle_stcctm
.insn rsy,0xeb0000000017,%r1,5,__MT_CYCLES_ENTER(%r2)
.Lpsw_idle_stcctm:
oi __LC_CPU_FLAGS+7,_CIF_ENABLED_WAIT
BPON
stckf __CLOCK_IDLE_ENTER(%r2)
stpt __TIMER_IDLE_ENTER(%r2)
lpswe __SF_EMPTY(%r15)
.globl psw_idle_exit
psw_idle_exit:
BR_EX %r14
ENDPROC(psw_idle)
/*
* Machine check handler routines
*/
ENTRY(mcck_int_handler)
stckf __LC_MCCK_CLOCK
BPOFF
la %r1,4095 # validate r1
spt __LC_CPU_TIMER_SAVE_AREA-4095(%r1) # validate cpu timer
LBEAR __LC_LAST_BREAK_SAVE_AREA-4095(%r1) # validate bear
lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# validate gprs
lg %r12,__LC_CURRENT
lmg %r8,%r9,__LC_MCK_OLD_PSW
TSTMSK __LC_MCCK_CODE,MCCK_CODE_SYSTEM_DAMAGE
jo .Lmcck_panic # yes -> rest of mcck code invalid
TSTMSK __LC_MCCK_CODE,MCCK_CODE_CR_VALID
jno .Lmcck_panic # control registers invalid -> panic
la %r14,4095
lctlg %c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r14) # validate ctl regs
ptlb
lghi %r14,__LC_CPU_TIMER_SAVE_AREA
mvc __LC_MCCK_ENTER_TIMER(8),0(%r14)
TSTMSK __LC_MCCK_CODE,MCCK_CODE_CPU_TIMER_VALID
jo 3f
la %r14,__LC_SYS_ENTER_TIMER
clc 0(8,%r14),__LC_EXIT_TIMER
jl 1f
la %r14,__LC_EXIT_TIMER
1: clc 0(8,%r14),__LC_LAST_UPDATE_TIMER
jl 2f
la %r14,__LC_LAST_UPDATE_TIMER
2: spt 0(%r14)
mvc __LC_MCCK_ENTER_TIMER(8),0(%r14)
3: TSTMSK __LC_MCCK_CODE,MCCK_CODE_PSW_MWP_VALID
jno .Lmcck_panic
tmhh %r8,0x0001 # interrupting from user ?
jnz 6f
TSTMSK __LC_MCCK_CODE,MCCK_CODE_PSW_IA_VALID
jno .Lmcck_panic
#if IS_ENABLED(CONFIG_KVM)
OUTSIDE %r9,.Lsie_gmap,.Lsie_done,6f
OUTSIDE %r9,.Lsie_entry,.Lsie_skip,4f
oi __LC_CPU_FLAGS+7, _CIF_MCCK_GUEST
j 5f
4: CHKSTG .Lmcck_panic
5: larl %r14,.Lstosm_tmp
stosm 0(%r14),0x04 # turn dat on, keep irqs off
BPENTER __SF_SIE_FLAGS(%r15),(_TIF_ISOLATE_BP|_TIF_ISOLATE_BP_GUEST)
SIEEXIT
j .Lmcck_stack
#endif
6: CHKSTG .Lmcck_panic
larl %r14,.Lstosm_tmp
stosm 0(%r14),0x04 # turn dat on, keep irqs off
tmhh %r8,0x0001 # interrupting from user ?
jz .Lmcck_stack
BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
.Lmcck_stack:
lg %r15,__LC_MCCK_STACK
la %r11,STACK_FRAME_OVERHEAD(%r15)
stctg %c1,%c1,__PT_CR1(%r11)
lctlg %c1,%c1,__LC_KERNEL_ASCE
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lghi %r14,__LC_GPREGS_SAVE_AREA+64
stmg %r0,%r7,__PT_R0(%r11)
# clear user controlled registers to prevent speculative use
xgr %r0,%r0
xgr %r1,%r1
xgr %r3,%r3
xgr %r4,%r4
xgr %r5,%r5
xgr %r6,%r6
xgr %r7,%r7
xgr %r10,%r10
mvc __PT_R8(64,%r11),0(%r14)
stmg %r8,%r9,__PT_PSW(%r11)
xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11)
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
brasl %r14,s390_do_machine_check
cghi %r2,0
je .Lmcck_return
lg %r1,__LC_KERNEL_STACK # switch to kernel stack
mvc STACK_FRAME_OVERHEAD(__PT_SIZE,%r1),0(%r11)
xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1)
la %r11,STACK_FRAME_OVERHEAD(%r1)
lgr %r15,%r1
brasl %r14,s390_handle_mcck
.Lmcck_return:
lctlg %c1,%c1,__PT_CR1(%r11)
lmg %r0,%r10,__PT_R0(%r11)
mvc __LC_RETURN_MCCK_PSW(16),__PT_PSW(%r11) # move return PSW
tm __LC_RETURN_MCCK_PSW+1,0x01 # returning to user ?
jno 0f
BPEXIT __TI_flags(%r12),_TIF_ISOLATE_BP
stpt __LC_EXIT_TIMER
0: ALTERNATIVE "", __stringify(lghi %r12,__LC_LAST_BREAK_SAVE_AREA),193
LBEAR 0(%r12)
lmg %r11,%r15,__PT_R11(%r11)
LPSWEY __LC_RETURN_MCCK_PSW,__LC_RETURN_MCCK_LPSWE
.Lmcck_panic:
/*
* Iterate over all possible CPU addresses in the range 0..0xffff
* and stop each CPU using signal processor. Use compare and swap
* to allow just one CPU-stopper and prevent concurrent CPUs from
* stopping each other while leaving the others running.
*/
lhi %r5,0
lhi %r6,1
larl %r7,.Lstop_lock
cs %r5,%r6,0(%r7) # single CPU-stopper only
jnz 4f
larl %r7,.Lthis_cpu
stap 0(%r7) # this CPU address
lh %r4,0(%r7)
nilh %r4,0
lhi %r0,1
sll %r0,16 # CPU counter
lhi %r3,0 # next CPU address
0: cr %r3,%r4
je 2f
1: sigp %r1,%r3,SIGP_STOP # stop next CPU
brc SIGP_CC_BUSY,1b
2: ahi %r3,1
brct %r0,0b
3: sigp %r1,%r4,SIGP_STOP # stop this CPU
brc SIGP_CC_BUSY,3b
4: j 4b
ENDPROC(mcck_int_handler)
ENTRY(restart_int_handler)
ALTERNATIVE "", "lpp _LPP_OFFSET", 40
stg %r15,__LC_SAVE_AREA_RESTART
TSTMSK __LC_RESTART_FLAGS,RESTART_FLAG_CTLREGS,4
jz 0f
la %r15,4095
lctlg %c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r15)
0: larl %r15,.Lstosm_tmp
stosm 0(%r15),0x04 # turn dat on, keep irqs off
lg %r15,__LC_RESTART_STACK
xc STACK_FRAME_OVERHEAD(__PT_SIZE,%r15),STACK_FRAME_OVERHEAD(%r15)
stmg %r0,%r14,STACK_FRAME_OVERHEAD+__PT_R0(%r15)
mvc STACK_FRAME_OVERHEAD+__PT_R15(8,%r15),__LC_SAVE_AREA_RESTART
mvc STACK_FRAME_OVERHEAD+__PT_PSW(16,%r15),__LC_RST_OLD_PSW
xc 0(STACK_FRAME_OVERHEAD,%r15),0(%r15)
lg %r1,__LC_RESTART_FN # load fn, parm & source cpu
lg %r2,__LC_RESTART_DATA
lgf %r3,__LC_RESTART_SOURCE
ltgr %r3,%r3 # test source cpu address
jm 1f # negative -> skip source stop
0: sigp %r4,%r3,SIGP_SENSE # sigp sense to source cpu
brc 10,0b # wait for status stored
1: basr %r14,%r1 # call function
stap __SF_EMPTY(%r15) # store cpu address
llgh %r3,__SF_EMPTY(%r15)
2: sigp %r4,%r3,SIGP_STOP # sigp stop to current cpu
brc 2,2b
3: j 3b
ENDPROC(restart_int_handler)
.section .kprobes.text, "ax"
#if defined(CONFIG_CHECK_STACK) || defined(CONFIG_VMAP_STACK)
/*
* The synchronous or the asynchronous stack overflowed. We are dead.
* No need to properly save the registers, we are going to panic anyway.
* Setup a pt_regs so that show_trace can provide a good call trace.
*/
ENTRY(stack_overflow)
lg %r15,__LC_NODAT_STACK # change to panic stack
la %r11,STACK_FRAME_OVERHEAD(%r15)
stmg %r0,%r7,__PT_R0(%r11)
stmg %r8,%r9,__PT_PSW(%r11)
mvc __PT_R8(64,%r11),0(%r14)
stg %r10,__PT_ORIG_GPR2(%r11) # store last break to orig_gpr2
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
jg kernel_stack_overflow
ENDPROC(stack_overflow)
#endif
.section .data, "aw"
.align 4
.Lstop_lock: .long 0
.Lthis_cpu: .short 0
.Lstosm_tmp: .byte 0
.section .rodata, "a"
#define SYSCALL(esame,emu) .quad __s390x_ ## esame
.globl sys_call_table
sys_call_table:
#include "asm/syscall_table.h"
#undef SYSCALL
#ifdef CONFIG_COMPAT
#define SYSCALL(esame,emu) .quad __s390_ ## emu
.globl sys_call_table_emu
sys_call_table_emu:
#include "asm/syscall_table.h"
#undef SYSCALL
#endif