| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2018 Oleksij Rempel <linux@rempel-privat.de> |
| * |
| * Driver for Alcor Micro AU6601 and AU6621 controllers |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/mfd/core.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| |
| #include <linux/alcor_pci.h> |
| |
| #define DRV_NAME_ALCOR_PCI "alcor_pci" |
| |
| static DEFINE_IDA(alcor_pci_idr); |
| |
| static struct mfd_cell alcor_pci_cells[] = { |
| [ALCOR_SD_CARD] = { |
| .name = DRV_NAME_ALCOR_PCI_SDMMC, |
| }, |
| [ALCOR_MS_CARD] = { |
| .name = DRV_NAME_ALCOR_PCI_MS, |
| }, |
| }; |
| |
| static const struct alcor_dev_cfg alcor_cfg = { |
| .dma = 0, |
| }; |
| |
| static const struct alcor_dev_cfg au6621_cfg = { |
| .dma = 1, |
| }; |
| |
| static const struct alcor_dev_cfg au6625_cfg = { |
| .dma = 0, |
| }; |
| |
| static const struct pci_device_id pci_ids[] = { |
| { PCI_DEVICE(PCI_ID_ALCOR_MICRO, PCI_ID_AU6601), |
| .driver_data = (kernel_ulong_t)&alcor_cfg }, |
| { PCI_DEVICE(PCI_ID_ALCOR_MICRO, PCI_ID_AU6621), |
| .driver_data = (kernel_ulong_t)&au6621_cfg }, |
| { PCI_DEVICE(PCI_ID_ALCOR_MICRO, PCI_ID_AU6625), |
| .driver_data = (kernel_ulong_t)&au6625_cfg }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(pci, pci_ids); |
| |
| void alcor_write8(struct alcor_pci_priv *priv, u8 val, unsigned int addr) |
| { |
| writeb(val, priv->iobase + addr); |
| } |
| EXPORT_SYMBOL_GPL(alcor_write8); |
| |
| void alcor_write16(struct alcor_pci_priv *priv, u16 val, unsigned int addr) |
| { |
| writew(val, priv->iobase + addr); |
| } |
| EXPORT_SYMBOL_GPL(alcor_write16); |
| |
| void alcor_write32(struct alcor_pci_priv *priv, u32 val, unsigned int addr) |
| { |
| writel(val, priv->iobase + addr); |
| } |
| EXPORT_SYMBOL_GPL(alcor_write32); |
| |
| void alcor_write32be(struct alcor_pci_priv *priv, u32 val, unsigned int addr) |
| { |
| iowrite32be(val, priv->iobase + addr); |
| } |
| EXPORT_SYMBOL_GPL(alcor_write32be); |
| |
| u8 alcor_read8(struct alcor_pci_priv *priv, unsigned int addr) |
| { |
| return readb(priv->iobase + addr); |
| } |
| EXPORT_SYMBOL_GPL(alcor_read8); |
| |
| u32 alcor_read32(struct alcor_pci_priv *priv, unsigned int addr) |
| { |
| return readl(priv->iobase + addr); |
| } |
| EXPORT_SYMBOL_GPL(alcor_read32); |
| |
| u32 alcor_read32be(struct alcor_pci_priv *priv, unsigned int addr) |
| { |
| return ioread32be(priv->iobase + addr); |
| } |
| EXPORT_SYMBOL_GPL(alcor_read32be); |
| |
| static int alcor_pci_find_cap_offset(struct alcor_pci_priv *priv, |
| struct pci_dev *pci) |
| { |
| int where; |
| u8 val8; |
| u32 val32; |
| |
| where = ALCOR_CAP_START_OFFSET; |
| pci_read_config_byte(pci, where, &val8); |
| if (!val8) |
| return 0; |
| |
| where = (int)val8; |
| while (1) { |
| pci_read_config_dword(pci, where, &val32); |
| if (val32 == 0xffffffff) { |
| dev_dbg(priv->dev, "find_cap_offset invalid value %x.\n", |
| val32); |
| return 0; |
| } |
| |
| if ((val32 & 0xff) == 0x10) { |
| dev_dbg(priv->dev, "pcie cap offset: %x\n", where); |
| return where; |
| } |
| |
| if ((val32 & 0xff00) == 0x00) { |
| dev_dbg(priv->dev, "pci_find_cap_offset invalid value %x.\n", |
| val32); |
| break; |
| } |
| where = (int)((val32 >> 8) & 0xff); |
| } |
| |
| return 0; |
| } |
| |
| static void alcor_pci_init_check_aspm(struct alcor_pci_priv *priv) |
| { |
| struct pci_dev *pci; |
| int where; |
| u32 val32; |
| |
| priv->pdev_cap_off = alcor_pci_find_cap_offset(priv, priv->pdev); |
| /* |
| * A device might be attached to root complex directly and |
| * priv->parent_pdev will be NULL. In this case we don't check its |
| * capability and disable ASPM completely. |
| */ |
| if (priv->parent_pdev) |
| priv->parent_cap_off = alcor_pci_find_cap_offset(priv, |
| priv->parent_pdev); |
| |
| if ((priv->pdev_cap_off == 0) || (priv->parent_cap_off == 0)) { |
| dev_dbg(priv->dev, "pci_cap_off: %x, parent_cap_off: %x\n", |
| priv->pdev_cap_off, priv->parent_cap_off); |
| return; |
| } |
| |
| /* link capability */ |
| pci = priv->pdev; |
| where = priv->pdev_cap_off + ALCOR_PCIE_LINK_CAP_OFFSET; |
| pci_read_config_dword(pci, where, &val32); |
| priv->pdev_aspm_cap = (u8)(val32 >> 10) & 0x03; |
| |
| pci = priv->parent_pdev; |
| where = priv->parent_cap_off + ALCOR_PCIE_LINK_CAP_OFFSET; |
| pci_read_config_dword(pci, where, &val32); |
| priv->parent_aspm_cap = (u8)(val32 >> 10) & 0x03; |
| |
| if (priv->pdev_aspm_cap != priv->parent_aspm_cap) { |
| u8 aspm_cap; |
| |
| dev_dbg(priv->dev, "pdev_aspm_cap: %x, parent_aspm_cap: %x\n", |
| priv->pdev_aspm_cap, priv->parent_aspm_cap); |
| aspm_cap = priv->pdev_aspm_cap & priv->parent_aspm_cap; |
| priv->pdev_aspm_cap = aspm_cap; |
| priv->parent_aspm_cap = aspm_cap; |
| } |
| |
| dev_dbg(priv->dev, "ext_config_dev_aspm: %x, pdev_aspm_cap: %x\n", |
| priv->ext_config_dev_aspm, priv->pdev_aspm_cap); |
| priv->ext_config_dev_aspm &= priv->pdev_aspm_cap; |
| } |
| |
| static void alcor_pci_aspm_ctrl(struct alcor_pci_priv *priv, u8 aspm_enable) |
| { |
| struct pci_dev *pci; |
| u8 aspm_ctrl, i; |
| int where; |
| u32 val32; |
| |
| if ((!priv->pdev_cap_off) || (!priv->parent_cap_off)) { |
| dev_dbg(priv->dev, "pci_cap_off: %x, parent_cap_off: %x\n", |
| priv->pdev_cap_off, priv->parent_cap_off); |
| return; |
| } |
| |
| if (!priv->pdev_aspm_cap) |
| return; |
| |
| aspm_ctrl = 0; |
| if (aspm_enable) { |
| aspm_ctrl = priv->ext_config_dev_aspm; |
| |
| if (!aspm_ctrl) { |
| dev_dbg(priv->dev, "aspm_ctrl == 0\n"); |
| return; |
| } |
| } |
| |
| for (i = 0; i < 2; i++) { |
| |
| if (i) { |
| pci = priv->parent_pdev; |
| where = priv->parent_cap_off |
| + ALCOR_PCIE_LINK_CTRL_OFFSET; |
| } else { |
| pci = priv->pdev; |
| where = priv->pdev_cap_off |
| + ALCOR_PCIE_LINK_CTRL_OFFSET; |
| } |
| |
| pci_read_config_dword(pci, where, &val32); |
| val32 &= (~0x03); |
| val32 |= (aspm_ctrl & priv->pdev_aspm_cap); |
| pci_write_config_byte(pci, where, (u8)val32); |
| } |
| |
| } |
| |
| static inline void alcor_mask_sd_irqs(struct alcor_pci_priv *priv) |
| { |
| alcor_write32(priv, 0, AU6601_REG_INT_ENABLE); |
| } |
| |
| static inline void alcor_unmask_sd_irqs(struct alcor_pci_priv *priv) |
| { |
| alcor_write32(priv, AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK | |
| AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE | |
| AU6601_INT_OVER_CURRENT_ERR, |
| AU6601_REG_INT_ENABLE); |
| } |
| |
| static inline void alcor_mask_ms_irqs(struct alcor_pci_priv *priv) |
| { |
| alcor_write32(priv, 0, AU6601_MS_INT_ENABLE); |
| } |
| |
| static inline void alcor_unmask_ms_irqs(struct alcor_pci_priv *priv) |
| { |
| alcor_write32(priv, 0x3d00fa, AU6601_MS_INT_ENABLE); |
| } |
| |
| static int alcor_pci_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct alcor_dev_cfg *cfg; |
| struct alcor_pci_priv *priv; |
| int ret, i, bar = 0; |
| |
| cfg = (void *)ent->driver_data; |
| |
| ret = pcim_enable_device(pdev); |
| if (ret) |
| return ret; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| ret = ida_alloc(&alcor_pci_idr, GFP_KERNEL); |
| if (ret < 0) |
| return ret; |
| priv->id = ret; |
| |
| priv->pdev = pdev; |
| priv->parent_pdev = pdev->bus->self; |
| priv->dev = &pdev->dev; |
| priv->cfg = cfg; |
| priv->irq = pdev->irq; |
| |
| ret = pci_request_regions(pdev, DRV_NAME_ALCOR_PCI); |
| if (ret) { |
| dev_err(&pdev->dev, "Cannot request region\n"); |
| ret = -ENOMEM; |
| goto error_free_ida; |
| } |
| |
| if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) { |
| dev_err(&pdev->dev, "BAR %d is not iomem. Aborting.\n", bar); |
| ret = -ENODEV; |
| goto error_release_regions; |
| } |
| |
| priv->iobase = pcim_iomap(pdev, bar, 0); |
| if (!priv->iobase) { |
| ret = -ENOMEM; |
| goto error_release_regions; |
| } |
| |
| /* make sure irqs are disabled */ |
| alcor_write32(priv, 0, AU6601_REG_INT_ENABLE); |
| alcor_write32(priv, 0, AU6601_MS_INT_ENABLE); |
| |
| ret = dma_set_mask_and_coherent(priv->dev, AU6601_SDMA_MASK); |
| if (ret) { |
| dev_err(priv->dev, "Failed to set DMA mask\n"); |
| goto error_release_regions; |
| } |
| |
| pci_set_master(pdev); |
| pci_set_drvdata(pdev, priv); |
| alcor_pci_init_check_aspm(priv); |
| |
| for (i = 0; i < ARRAY_SIZE(alcor_pci_cells); i++) { |
| alcor_pci_cells[i].platform_data = priv; |
| alcor_pci_cells[i].pdata_size = sizeof(*priv); |
| } |
| ret = mfd_add_devices(&pdev->dev, priv->id, alcor_pci_cells, |
| ARRAY_SIZE(alcor_pci_cells), NULL, 0, NULL); |
| if (ret < 0) |
| goto error_release_regions; |
| |
| alcor_pci_aspm_ctrl(priv, 0); |
| |
| return 0; |
| |
| error_release_regions: |
| pci_release_regions(pdev); |
| error_free_ida: |
| ida_free(&alcor_pci_idr, priv->id); |
| return ret; |
| } |
| |
| static void alcor_pci_remove(struct pci_dev *pdev) |
| { |
| struct alcor_pci_priv *priv; |
| |
| priv = pci_get_drvdata(pdev); |
| |
| alcor_pci_aspm_ctrl(priv, 1); |
| |
| mfd_remove_devices(&pdev->dev); |
| |
| ida_free(&alcor_pci_idr, priv->id); |
| |
| pci_release_regions(pdev); |
| pci_set_drvdata(pdev, NULL); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int alcor_suspend(struct device *dev) |
| { |
| struct alcor_pci_priv *priv = dev_get_drvdata(dev); |
| |
| alcor_pci_aspm_ctrl(priv, 1); |
| return 0; |
| } |
| |
| static int alcor_resume(struct device *dev) |
| { |
| |
| struct alcor_pci_priv *priv = dev_get_drvdata(dev); |
| |
| alcor_pci_aspm_ctrl(priv, 0); |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static SIMPLE_DEV_PM_OPS(alcor_pci_pm_ops, alcor_suspend, alcor_resume); |
| |
| static struct pci_driver alcor_driver = { |
| .name = DRV_NAME_ALCOR_PCI, |
| .id_table = pci_ids, |
| .probe = alcor_pci_probe, |
| .remove = alcor_pci_remove, |
| .driver = { |
| .pm = &alcor_pci_pm_ops |
| }, |
| }; |
| |
| module_pci_driver(alcor_driver); |
| |
| MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>"); |
| MODULE_DESCRIPTION("PCI driver for Alcor Micro AU6601 Secure Digital Host Controller Interface"); |
| MODULE_LICENSE("GPL"); |