| # SPDX-License-Identifier: GPL-2.0-only |
| menuconfig ARCH_EP93XX |
| bool "EP93xx-based" |
| depends on ATAGS |
| depends on ARCH_MULTI_V4T |
| depends on CPU_LITTLE_ENDIAN |
| select ARCH_SPARSEMEM_ENABLE |
| select ARM_AMBA |
| select ARM_VIC |
| select CLKSRC_MMIO |
| select CPU_ARM920T |
| select GPIOLIB |
| help |
| This enables support for the Cirrus EP93xx series of CPUs. |
| |
| if ARCH_EP93XX |
| |
| menu "Cirrus EP93xx Implementation Options" |
| |
| config EP93XX_SOC_COMMON |
| bool |
| default y |
| select SOC_BUS |
| select LEDS_GPIO_REGISTER |
| |
| comment "EP93xx Platforms" |
| |
| config MACH_ADSSPHERE |
| bool "Support ADS Sphere" |
| depends on UNUSED_BOARD_FILES |
| help |
| Say 'Y' here if you want your kernel to support the ADS |
| Sphere board. |
| |
| config MACH_BK3 |
| bool "Support Liebherr BK3.1" |
| select MACH_TS72XX |
| help |
| Say 'Y' here if you want your kernel to support the |
| Liebherr controller BK3.1. |
| |
| config MACH_EDB93XX |
| bool |
| |
| config MACH_EDB9301 |
| bool "Support Cirrus Logic EDB9301" |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9301 Evaluation Board. |
| |
| config MACH_EDB9302 |
| bool "Support Cirrus Logic EDB9302" |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9302 Evaluation Board. |
| |
| config MACH_EDB9302A |
| bool "Support Cirrus Logic EDB9302A" |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9302A Evaluation Board. |
| |
| config MACH_EDB9307 |
| bool "Support Cirrus Logic EDB9307" |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9307 Evaluation Board. |
| |
| config MACH_EDB9307A |
| bool "Support Cirrus Logic EDB9307A" |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9307A Evaluation Board. |
| |
| config MACH_EDB9312 |
| bool "Support Cirrus Logic EDB9312" |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9312 Evaluation Board. |
| |
| config MACH_EDB9315 |
| bool "Support Cirrus Logic EDB9315" |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9315 Evaluation Board. |
| |
| config MACH_EDB9315A |
| bool "Support Cirrus Logic EDB9315A" |
| select MACH_EDB93XX |
| help |
| Say 'Y' here if you want your kernel to support the Cirrus |
| Logic EDB9315A Evaluation Board. |
| |
| config MACH_GESBC9312 |
| bool "Support Glomation GESBC-9312-sx" |
| depends on UNUSED_BOARD_FILES |
| help |
| Say 'Y' here if you want your kernel to support the Glomation |
| GESBC-9312-sx board. |
| |
| config MACH_MICRO9 |
| bool |
| |
| config MACH_MICRO9H |
| bool "Support Contec Micro9-High" |
| select MACH_MICRO9 |
| depends on UNUSED_BOARD_FILES |
| help |
| Say 'Y' here if you want your kernel to support the |
| Contec Micro9-High board. |
| |
| config MACH_MICRO9M |
| bool "Support Contec Micro9-Mid" |
| select MACH_MICRO9 |
| depends on UNUSED_BOARD_FILES |
| help |
| Say 'Y' here if you want your kernel to support the |
| Contec Micro9-Mid board. |
| |
| config MACH_MICRO9L |
| bool "Support Contec Micro9-Lite" |
| select MACH_MICRO9 |
| depends on UNUSED_BOARD_FILES |
| help |
| Say 'Y' here if you want your kernel to support the |
| Contec Micro9-Lite board. |
| |
| config MACH_MICRO9S |
| bool "Support Contec Micro9-Slim" |
| select MACH_MICRO9 |
| depends on UNUSED_BOARD_FILES |
| help |
| Say 'Y' here if you want your kernel to support the |
| Contec Micro9-Slim board. |
| |
| config MACH_SIM_ONE |
| bool "Support Simplemachines Sim.One board" |
| depends on UNUSED_BOARD_FILES |
| help |
| Say 'Y' here if you want your kernel to support the |
| Simplemachines Sim.One board. |
| |
| config MACH_SNAPPER_CL15 |
| bool "Support Bluewater Systems Snapper CL15 Module" |
| depends on UNUSED_BOARD_FILES |
| help |
| Say 'Y' here if you want your kernel to support the Bluewater |
| Systems Snapper CL15 Module. |
| |
| config MACH_TS72XX |
| bool "Support Technologic Systems TS-72xx SBC" |
| help |
| Say 'Y' here if you want your kernel to support the |
| Technologic Systems TS-72xx board. |
| |
| config MACH_VISION_EP9307 |
| bool "Support Vision Engraving Systems EP9307 SoM" |
| help |
| Say 'Y' here if you want your kernel to support the |
| Vision Engraving Systems EP9307 SoM. |
| |
| endmenu |
| |
| endif |
