| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Author: Xiang Gao <gaoxiang@loongson.cn> |
| * Huacai Chen <chenhuacai@loongson.cn> |
| * |
| * Copyright (C) 2020-2022 Loongson Technology Corporation Limited |
| */ |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/mmzone.h> |
| #include <linux/export.h> |
| #include <linux/nodemask.h> |
| #include <linux/swap.h> |
| #include <linux/memblock.h> |
| #include <linux/pfn.h> |
| #include <linux/acpi.h> |
| #include <linux/efi.h> |
| #include <linux/irq.h> |
| #include <linux/pci.h> |
| #include <asm/bootinfo.h> |
| #include <asm/loongson.h> |
| #include <asm/numa.h> |
| #include <asm/page.h> |
| #include <asm/pgalloc.h> |
| #include <asm/sections.h> |
| #include <asm/time.h> |
| |
| int numa_off; |
| struct pglist_data *node_data[MAX_NUMNODES]; |
| unsigned char node_distances[MAX_NUMNODES][MAX_NUMNODES]; |
| |
| EXPORT_SYMBOL(node_data); |
| EXPORT_SYMBOL(node_distances); |
| |
| static struct numa_meminfo numa_meminfo; |
| cpumask_t cpus_on_node[MAX_NUMNODES]; |
| cpumask_t phys_cpus_on_node[MAX_NUMNODES]; |
| EXPORT_SYMBOL(cpus_on_node); |
| |
| /* |
| * apicid, cpu, node mappings |
| */ |
| s16 __cpuid_to_node[CONFIG_NR_CPUS] = { |
| [0 ... CONFIG_NR_CPUS - 1] = NUMA_NO_NODE |
| }; |
| EXPORT_SYMBOL(__cpuid_to_node); |
| |
| nodemask_t numa_nodes_parsed __initdata; |
| |
| #ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA |
| unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; |
| EXPORT_SYMBOL(__per_cpu_offset); |
| |
| static int __init pcpu_cpu_to_node(int cpu) |
| { |
| return early_cpu_to_node(cpu); |
| } |
| |
| static int __init pcpu_cpu_distance(unsigned int from, unsigned int to) |
| { |
| if (early_cpu_to_node(from) == early_cpu_to_node(to)) |
| return LOCAL_DISTANCE; |
| else |
| return REMOTE_DISTANCE; |
| } |
| |
| void __init pcpu_populate_pte(unsigned long addr) |
| { |
| pgd_t *pgd = pgd_offset_k(addr); |
| p4d_t *p4d = p4d_offset(pgd, addr); |
| pud_t *pud; |
| pmd_t *pmd; |
| |
| if (p4d_none(*p4d)) { |
| pud_t *new; |
| |
| new = memblock_alloc(PAGE_SIZE, PAGE_SIZE); |
| pgd_populate(&init_mm, pgd, new); |
| #ifndef __PAGETABLE_PUD_FOLDED |
| pud_init((unsigned long)new, (unsigned long)invalid_pmd_table); |
| #endif |
| } |
| |
| pud = pud_offset(p4d, addr); |
| if (pud_none(*pud)) { |
| pmd_t *new; |
| |
| new = memblock_alloc(PAGE_SIZE, PAGE_SIZE); |
| pud_populate(&init_mm, pud, new); |
| #ifndef __PAGETABLE_PMD_FOLDED |
| pmd_init((unsigned long)new, (unsigned long)invalid_pte_table); |
| #endif |
| } |
| |
| pmd = pmd_offset(pud, addr); |
| if (!pmd_present(*pmd)) { |
| pte_t *new; |
| |
| new = memblock_alloc(PAGE_SIZE, PAGE_SIZE); |
| pmd_populate_kernel(&init_mm, pmd, new); |
| } |
| } |
| |
| void __init setup_per_cpu_areas(void) |
| { |
| unsigned long delta; |
| unsigned int cpu; |
| int rc = -EINVAL; |
| |
| if (pcpu_chosen_fc == PCPU_FC_AUTO) { |
| if (nr_node_ids >= 8) |
| pcpu_chosen_fc = PCPU_FC_PAGE; |
| else |
| pcpu_chosen_fc = PCPU_FC_EMBED; |
| } |
| |
| /* |
| * Always reserve area for module percpu variables. That's |
| * what the legacy allocator did. |
| */ |
| if (pcpu_chosen_fc != PCPU_FC_PAGE) { |
| rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE, |
| PERCPU_DYNAMIC_RESERVE, PMD_SIZE, |
| pcpu_cpu_distance, pcpu_cpu_to_node); |
| if (rc < 0) |
| pr_warn("%s allocator failed (%d), falling back to page size\n", |
| pcpu_fc_names[pcpu_chosen_fc], rc); |
| } |
| if (rc < 0) |
| rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE, pcpu_cpu_to_node); |
| if (rc < 0) |
| panic("cannot initialize percpu area (err=%d)", rc); |
| |
| delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; |
| for_each_possible_cpu(cpu) |
| __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu]; |
| } |
| #endif |
| |
| /* |
| * Get nodeid by logical cpu number. |
| * __cpuid_to_node maps phyical cpu id to node, so we |
| * should use cpu_logical_map(cpu) to index it. |
| * |
| * This routine is only used in early phase during |
| * booting, after setup_per_cpu_areas calling and numa_node |
| * initialization, cpu_to_node will be used instead. |
| */ |
| int early_cpu_to_node(int cpu) |
| { |
| int physid = cpu_logical_map(cpu); |
| |
| if (physid < 0) |
| return NUMA_NO_NODE; |
| |
| return __cpuid_to_node[physid]; |
| } |
| |
| void __init early_numa_add_cpu(int cpuid, s16 node) |
| { |
| int cpu = __cpu_number_map[cpuid]; |
| |
| if (cpu < 0) |
| return; |
| |
| cpumask_set_cpu(cpu, &cpus_on_node[node]); |
| cpumask_set_cpu(cpuid, &phys_cpus_on_node[node]); |
| } |
| |
| void numa_add_cpu(unsigned int cpu) |
| { |
| int nid = cpu_to_node(cpu); |
| cpumask_set_cpu(cpu, &cpus_on_node[nid]); |
| } |
| |
| void numa_remove_cpu(unsigned int cpu) |
| { |
| int nid = cpu_to_node(cpu); |
| cpumask_clear_cpu(cpu, &cpus_on_node[nid]); |
| } |
| |
| static int __init numa_add_memblk_to(int nid, u64 start, u64 end, |
| struct numa_meminfo *mi) |
| { |
| /* ignore zero length blks */ |
| if (start == end) |
| return 0; |
| |
| /* whine about and ignore invalid blks */ |
| if (start > end || nid < 0 || nid >= MAX_NUMNODES) { |
| pr_warn("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n", |
| nid, start, end - 1); |
| return 0; |
| } |
| |
| if (mi->nr_blks >= NR_NODE_MEMBLKS) { |
| pr_err("NUMA: too many memblk ranges\n"); |
| return -EINVAL; |
| } |
| |
| mi->blk[mi->nr_blks].start = PFN_ALIGN(start); |
| mi->blk[mi->nr_blks].end = PFN_ALIGN(end - PAGE_SIZE + 1); |
| mi->blk[mi->nr_blks].nid = nid; |
| mi->nr_blks++; |
| return 0; |
| } |
| |
| /** |
| * numa_add_memblk - Add one numa_memblk to numa_meminfo |
| * @nid: NUMA node ID of the new memblk |
| * @start: Start address of the new memblk |
| * @end: End address of the new memblk |
| * |
| * Add a new memblk to the default numa_meminfo. |
| * |
| * RETURNS: |
| * 0 on success, -errno on failure. |
| */ |
| int __init numa_add_memblk(int nid, u64 start, u64 end) |
| { |
| return numa_add_memblk_to(nid, start, end, &numa_meminfo); |
| } |
| |
| static void __init alloc_node_data(int nid) |
| { |
| void *nd; |
| unsigned long nd_pa; |
| size_t nd_sz = roundup(sizeof(pg_data_t), PAGE_SIZE); |
| |
| nd_pa = memblock_phys_alloc_try_nid(nd_sz, SMP_CACHE_BYTES, nid); |
| if (!nd_pa) { |
| pr_err("Cannot find %zu Byte for node_data (initial node: %d)\n", nd_sz, nid); |
| return; |
| } |
| |
| nd = __va(nd_pa); |
| |
| node_data[nid] = nd; |
| memset(nd, 0, sizeof(pg_data_t)); |
| } |
| |
| static void __init node_mem_init(unsigned int node) |
| { |
| unsigned long start_pfn, end_pfn; |
| unsigned long node_addrspace_offset; |
| |
| node_addrspace_offset = nid_to_addrbase(node); |
| pr_info("Node%d's addrspace_offset is 0x%lx\n", |
| node, node_addrspace_offset); |
| |
| get_pfn_range_for_nid(node, &start_pfn, &end_pfn); |
| pr_info("Node%d: start_pfn=0x%lx, end_pfn=0x%lx\n", |
| node, start_pfn, end_pfn); |
| |
| alloc_node_data(node); |
| } |
| |
| #ifdef CONFIG_ACPI_NUMA |
| |
| /* |
| * Sanity check to catch more bad NUMA configurations (they are amazingly |
| * common). Make sure the nodes cover all memory. |
| */ |
| static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi) |
| { |
| int i; |
| u64 numaram, biosram; |
| |
| numaram = 0; |
| for (i = 0; i < mi->nr_blks; i++) { |
| u64 s = mi->blk[i].start >> PAGE_SHIFT; |
| u64 e = mi->blk[i].end >> PAGE_SHIFT; |
| |
| numaram += e - s; |
| numaram -= __absent_pages_in_range(mi->blk[i].nid, s, e); |
| if ((s64)numaram < 0) |
| numaram = 0; |
| } |
| max_pfn = max_low_pfn; |
| biosram = max_pfn - absent_pages_in_range(0, max_pfn); |
| |
| BUG_ON((s64)(biosram - numaram) >= (1 << (20 - PAGE_SHIFT))); |
| return true; |
| } |
| |
| static void __init add_node_intersection(u32 node, u64 start, u64 size, u32 type) |
| { |
| static unsigned long num_physpages; |
| |
| num_physpages += (size >> PAGE_SHIFT); |
| pr_info("Node%d: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n", |
| node, type, start, size); |
| pr_info(" start_pfn:0x%llx, end_pfn:0x%llx, num_physpages:0x%lx\n", |
| start >> PAGE_SHIFT, (start + size) >> PAGE_SHIFT, num_physpages); |
| memblock_set_node(start, size, &memblock.memory, node); |
| } |
| |
| /* |
| * add_numamem_region |
| * |
| * Add a uasable memory region described by BIOS. The |
| * routine gets each intersection between BIOS's region |
| * and node's region, and adds them into node's memblock |
| * pool. |
| * |
| */ |
| static void __init add_numamem_region(u64 start, u64 end, u32 type) |
| { |
| u32 i; |
| u64 ofs = start; |
| |
| if (start >= end) { |
| pr_debug("Invalid region: %016llx-%016llx\n", start, end); |
| return; |
| } |
| |
| for (i = 0; i < numa_meminfo.nr_blks; i++) { |
| struct numa_memblk *mb = &numa_meminfo.blk[i]; |
| |
| if (ofs > mb->end) |
| continue; |
| |
| if (end > mb->end) { |
| add_node_intersection(mb->nid, ofs, mb->end - ofs, type); |
| ofs = mb->end; |
| } else { |
| add_node_intersection(mb->nid, ofs, end - ofs, type); |
| break; |
| } |
| } |
| } |
| |
| static void __init init_node_memblock(void) |
| { |
| u32 mem_type; |
| u64 mem_end, mem_start, mem_size; |
| efi_memory_desc_t *md; |
| |
| /* Parse memory information and activate */ |
| for_each_efi_memory_desc(md) { |
| mem_type = md->type; |
| mem_start = md->phys_addr; |
| mem_size = md->num_pages << EFI_PAGE_SHIFT; |
| mem_end = mem_start + mem_size; |
| |
| switch (mem_type) { |
| case EFI_LOADER_CODE: |
| case EFI_LOADER_DATA: |
| case EFI_BOOT_SERVICES_CODE: |
| case EFI_BOOT_SERVICES_DATA: |
| case EFI_PERSISTENT_MEMORY: |
| case EFI_CONVENTIONAL_MEMORY: |
| add_numamem_region(mem_start, mem_end, mem_type); |
| break; |
| case EFI_PAL_CODE: |
| case EFI_UNUSABLE_MEMORY: |
| case EFI_ACPI_RECLAIM_MEMORY: |
| add_numamem_region(mem_start, mem_end, mem_type); |
| fallthrough; |
| case EFI_RESERVED_TYPE: |
| case EFI_RUNTIME_SERVICES_CODE: |
| case EFI_RUNTIME_SERVICES_DATA: |
| case EFI_MEMORY_MAPPED_IO: |
| case EFI_MEMORY_MAPPED_IO_PORT_SPACE: |
| pr_info("Resvd: mem_type:%d, mem_start:0x%llx, mem_size:0x%llx Bytes\n", |
| mem_type, mem_start, mem_size); |
| break; |
| } |
| } |
| } |
| |
| static void __init numa_default_distance(void) |
| { |
| int row, col; |
| |
| for (row = 0; row < MAX_NUMNODES; row++) |
| for (col = 0; col < MAX_NUMNODES; col++) { |
| if (col == row) |
| node_distances[row][col] = LOCAL_DISTANCE; |
| else |
| /* We assume that one node per package here! |
| * |
| * A SLIT should be used for multiple nodes |
| * per package to override default setting. |
| */ |
| node_distances[row][col] = REMOTE_DISTANCE; |
| } |
| } |
| |
| int __init init_numa_memory(void) |
| { |
| int i; |
| int ret; |
| int node; |
| |
| for (i = 0; i < NR_CPUS; i++) |
| set_cpuid_to_node(i, NUMA_NO_NODE); |
| |
| numa_default_distance(); |
| nodes_clear(numa_nodes_parsed); |
| nodes_clear(node_possible_map); |
| nodes_clear(node_online_map); |
| memset(&numa_meminfo, 0, sizeof(numa_meminfo)); |
| |
| /* Parse SRAT and SLIT if provided by firmware. */ |
| ret = acpi_numa_init(); |
| if (ret < 0) |
| return ret; |
| |
| node_possible_map = numa_nodes_parsed; |
| if (WARN_ON(nodes_empty(node_possible_map))) |
| return -EINVAL; |
| |
| init_node_memblock(); |
| if (numa_meminfo_cover_memory(&numa_meminfo) == false) |
| return -EINVAL; |
| |
| for_each_node_mask(node, node_possible_map) { |
| node_mem_init(node); |
| node_set_online(node); |
| } |
| max_low_pfn = PHYS_PFN(memblock_end_of_DRAM()); |
| |
| setup_nr_node_ids(); |
| loongson_sysconf.nr_nodes = nr_node_ids; |
| loongson_sysconf.cores_per_node = cpumask_weight(&phys_cpus_on_node[0]); |
| |
| return 0; |
| } |
| |
| #endif |
| |
| void __init paging_init(void) |
| { |
| unsigned int node; |
| unsigned long zones_size[MAX_NR_ZONES] = {0, }; |
| |
| for_each_online_node(node) { |
| unsigned long start_pfn, end_pfn; |
| |
| get_pfn_range_for_nid(node, &start_pfn, &end_pfn); |
| |
| if (end_pfn > max_low_pfn) |
| max_low_pfn = end_pfn; |
| } |
| #ifdef CONFIG_ZONE_DMA32 |
| zones_size[ZONE_DMA32] = MAX_DMA32_PFN; |
| #endif |
| zones_size[ZONE_NORMAL] = max_low_pfn; |
| free_area_init(zones_size); |
| } |
| |
| void __init mem_init(void) |
| { |
| high_memory = (void *) __va(max_low_pfn << PAGE_SHIFT); |
| memblock_free_all(); |
| setup_zero_pages(); /* This comes from node 0 */ |
| } |
| |
| int pcibus_to_node(struct pci_bus *bus) |
| { |
| return dev_to_node(&bus->dev); |
| } |
| EXPORT_SYMBOL(pcibus_to_node); |