| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2001 Dave Engebretsen, IBM Corporation |
| * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM |
| * |
| * RTAS specific routines for PCI. |
| * |
| * Based on code from pci.c, chrp_pci.c and pSeries_pci.c |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/threads.h> |
| #include <linux/pci.h> |
| #include <linux/string.h> |
| #include <linux/init.h> |
| #include <linux/pgtable.h> |
| #include <linux/of_address.h> |
| #include <linux/of_fdt.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| #include <asm/machdep.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/iommu.h> |
| #include <asm/rtas.h> |
| #include <asm/mpic.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/eeh.h> |
| |
| /* RTAS tokens */ |
| static int read_pci_config; |
| static int write_pci_config; |
| static int ibm_read_pci_config; |
| static int ibm_write_pci_config; |
| |
| static inline int config_access_valid(struct pci_dn *dn, int where) |
| { |
| if (where < 256) |
| return 1; |
| if (where < 4096 && dn->pci_ext_config_space) |
| return 1; |
| |
| return 0; |
| } |
| |
| int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val) |
| { |
| int returnval = -1; |
| unsigned long buid, addr; |
| int ret; |
| |
| if (!pdn) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| if (!config_access_valid(pdn, where)) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| #ifdef CONFIG_EEH |
| if (pdn->edev && pdn->edev->pe && |
| (pdn->edev->pe->state & EEH_PE_CFG_BLOCKED)) |
| return PCIBIOS_SET_FAILED; |
| #endif |
| |
| addr = rtas_config_addr(pdn->busno, pdn->devfn, where); |
| buid = pdn->phb->buid; |
| if (buid) { |
| ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, |
| addr, BUID_HI(buid), BUID_LO(buid), size); |
| } else { |
| ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); |
| } |
| *val = returnval; |
| |
| if (ret) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int rtas_pci_read_config(struct pci_bus *bus, |
| unsigned int devfn, |
| int where, int size, u32 *val) |
| { |
| struct pci_dn *pdn; |
| int ret; |
| |
| *val = 0xFFFFFFFF; |
| |
| pdn = pci_get_pdn_by_devfn(bus, devfn); |
| |
| /* Validity of pdn is checked in here */ |
| ret = rtas_read_config(pdn, where, size, val); |
| if (*val == EEH_IO_ERROR_VALUE(size) && |
| eeh_dev_check_failure(pdn_to_eeh_dev(pdn))) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| return ret; |
| } |
| |
| int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val) |
| { |
| unsigned long buid, addr; |
| int ret; |
| |
| if (!pdn) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| if (!config_access_valid(pdn, where)) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| #ifdef CONFIG_EEH |
| if (pdn->edev && pdn->edev->pe && |
| (pdn->edev->pe->state & EEH_PE_CFG_BLOCKED)) |
| return PCIBIOS_SET_FAILED; |
| #endif |
| |
| addr = rtas_config_addr(pdn->busno, pdn->devfn, where); |
| buid = pdn->phb->buid; |
| if (buid) { |
| ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, |
| BUID_HI(buid), BUID_LO(buid), size, (ulong) val); |
| } else { |
| ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); |
| } |
| |
| if (ret) |
| return PCIBIOS_DEVICE_NOT_FOUND; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int rtas_pci_write_config(struct pci_bus *bus, |
| unsigned int devfn, |
| int where, int size, u32 val) |
| { |
| struct pci_dn *pdn; |
| |
| pdn = pci_get_pdn_by_devfn(bus, devfn); |
| |
| /* Validity of pdn is checked in here. */ |
| return rtas_write_config(pdn, where, size, val); |
| } |
| |
| static struct pci_ops rtas_pci_ops = { |
| .read = rtas_pci_read_config, |
| .write = rtas_pci_write_config, |
| }; |
| |
| static int is_python(struct device_node *dev) |
| { |
| const char *model = of_get_property(dev, "model", NULL); |
| |
| if (model && strstr(model, "Python")) |
| return 1; |
| |
| return 0; |
| } |
| |
| static void python_countermeasures(struct device_node *dev) |
| { |
| struct resource registers; |
| void __iomem *chip_regs; |
| volatile u32 val; |
| |
| if (of_address_to_resource(dev, 0, ®isters)) { |
| printk(KERN_ERR "Can't get address for Python workarounds !\n"); |
| return; |
| } |
| |
| /* Python's register file is 1 MB in size. */ |
| chip_regs = ioremap(registers.start & ~(0xfffffUL), 0x100000); |
| |
| /* |
| * Firmware doesn't always clear this bit which is critical |
| * for good performance - Anton |
| */ |
| |
| #define PRG_CL_RESET_VALID 0x00010000 |
| |
| val = in_be32(chip_regs + 0xf6030); |
| if (val & PRG_CL_RESET_VALID) { |
| printk(KERN_INFO "Python workaround: "); |
| val &= ~PRG_CL_RESET_VALID; |
| out_be32(chip_regs + 0xf6030, val); |
| /* |
| * We must read it back for changes to |
| * take effect |
| */ |
| val = in_be32(chip_regs + 0xf6030); |
| printk("reg0: %x\n", val); |
| } |
| |
| iounmap(chip_regs); |
| } |
| |
| void __init init_pci_config_tokens(void) |
| { |
| read_pci_config = rtas_token("read-pci-config"); |
| write_pci_config = rtas_token("write-pci-config"); |
| ibm_read_pci_config = rtas_token("ibm,read-pci-config"); |
| ibm_write_pci_config = rtas_token("ibm,write-pci-config"); |
| } |
| |
| unsigned long get_phb_buid(struct device_node *phb) |
| { |
| struct resource r; |
| |
| if (ibm_read_pci_config == -1) |
| return 0; |
| if (of_address_to_resource(phb, 0, &r)) |
| return 0; |
| return r.start; |
| } |
| |
| static int phb_set_bus_ranges(struct device_node *dev, |
| struct pci_controller *phb) |
| { |
| const __be32 *bus_range; |
| unsigned int len; |
| |
| bus_range = of_get_property(dev, "bus-range", &len); |
| if (bus_range == NULL || len < 2 * sizeof(int)) { |
| return 1; |
| } |
| |
| phb->first_busno = be32_to_cpu(bus_range[0]); |
| phb->last_busno = be32_to_cpu(bus_range[1]); |
| |
| return 0; |
| } |
| |
| int rtas_setup_phb(struct pci_controller *phb) |
| { |
| struct device_node *dev = phb->dn; |
| |
| if (is_python(dev)) |
| python_countermeasures(dev); |
| |
| if (phb_set_bus_ranges(dev, phb)) |
| return 1; |
| |
| phb->ops = &rtas_pci_ops; |
| phb->buid = get_phb_buid(dev); |
| |
| return 0; |
| } |