| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * RTC related functions |
| */ |
| #include <linux/platform_device.h> |
| #include <linux/mc146818rtc.h> |
| #include <linux/export.h> |
| #include <linux/pnp.h> |
| |
| #include <asm/vsyscall.h> |
| #include <asm/x86_init.h> |
| #include <asm/time.h> |
| #include <asm/intel-mid.h> |
| #include <asm/setup.h> |
| |
| #ifdef CONFIG_X86_32 |
| /* |
| * This is a special lock that is owned by the CPU and holds the index |
| * register we are working with. It is required for NMI access to the |
| * CMOS/RTC registers. See arch/x86/include/asm/mc146818rtc.h for details. |
| */ |
| volatile unsigned long cmos_lock; |
| EXPORT_SYMBOL(cmos_lock); |
| #endif /* CONFIG_X86_32 */ |
| |
| DEFINE_SPINLOCK(rtc_lock); |
| EXPORT_SYMBOL(rtc_lock); |
| |
| /* |
| * In order to set the CMOS clock precisely, mach_set_cmos_time has to be |
| * called 500 ms after the second nowtime has started, because when |
| * nowtime is written into the registers of the CMOS clock, it will |
| * jump to the next second precisely 500 ms later. Check the Motorola |
| * MC146818A or Dallas DS12887 data sheet for details. |
| */ |
| int mach_set_cmos_time(const struct timespec64 *now) |
| { |
| unsigned long long nowtime = now->tv_sec; |
| struct rtc_time tm; |
| int retval = 0; |
| |
| rtc_time64_to_tm(nowtime, &tm); |
| if (!rtc_valid_tm(&tm)) { |
| retval = mc146818_set_time(&tm); |
| if (retval) |
| printk(KERN_ERR "%s: RTC write failed with error %d\n", |
| __func__, retval); |
| } else { |
| printk(KERN_ERR |
| "%s: Invalid RTC value: write of %llx to RTC failed\n", |
| __func__, nowtime); |
| retval = -EINVAL; |
| } |
| return retval; |
| } |
| |
| void mach_get_cmos_time(struct timespec64 *now) |
| { |
| struct rtc_time tm; |
| |
| /* |
| * If pm_trace abused the RTC as storage, set the timespec to 0, |
| * which tells the caller that this RTC value is unusable. |
| */ |
| if (!pm_trace_rtc_valid()) { |
| now->tv_sec = now->tv_nsec = 0; |
| return; |
| } |
| |
| if (mc146818_get_time(&tm)) { |
| pr_err("Unable to read current time from RTC\n"); |
| now->tv_sec = now->tv_nsec = 0; |
| return; |
| } |
| |
| now->tv_sec = rtc_tm_to_time64(&tm); |
| now->tv_nsec = 0; |
| } |
| |
| /* Routines for accessing the CMOS RAM/RTC. */ |
| unsigned char rtc_cmos_read(unsigned char addr) |
| { |
| unsigned char val; |
| |
| lock_cmos_prefix(addr); |
| outb(addr, RTC_PORT(0)); |
| val = inb(RTC_PORT(1)); |
| lock_cmos_suffix(addr); |
| |
| return val; |
| } |
| EXPORT_SYMBOL(rtc_cmos_read); |
| |
| void rtc_cmos_write(unsigned char val, unsigned char addr) |
| { |
| lock_cmos_prefix(addr); |
| outb(addr, RTC_PORT(0)); |
| outb(val, RTC_PORT(1)); |
| lock_cmos_suffix(addr); |
| } |
| EXPORT_SYMBOL(rtc_cmos_write); |
| |
| int update_persistent_clock64(struct timespec64 now) |
| { |
| return x86_platform.set_wallclock(&now); |
| } |
| |
| /* not static: needed by APM */ |
| void read_persistent_clock64(struct timespec64 *ts) |
| { |
| x86_platform.get_wallclock(ts); |
| } |
| |
| |
| static struct resource rtc_resources[] = { |
| [0] = { |
| .start = RTC_PORT(0), |
| .end = RTC_PORT(1), |
| .flags = IORESOURCE_IO, |
| }, |
| [1] = { |
| .start = RTC_IRQ, |
| .end = RTC_IRQ, |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| static struct platform_device rtc_device = { |
| .name = "rtc_cmos", |
| .id = -1, |
| .resource = rtc_resources, |
| .num_resources = ARRAY_SIZE(rtc_resources), |
| }; |
| |
| static __init int add_rtc_cmos(void) |
| { |
| #ifdef CONFIG_PNP |
| static const char * const ids[] __initconst = |
| { "PNP0b00", "PNP0b01", "PNP0b02", }; |
| struct pnp_dev *dev; |
| struct pnp_id *id; |
| int i; |
| |
| pnp_for_each_dev(dev) { |
| for (id = dev->id; id; id = id->next) { |
| for (i = 0; i < ARRAY_SIZE(ids); i++) { |
| if (compare_pnp_id(id, ids[i]) != 0) |
| return 0; |
| } |
| } |
| } |
| #endif |
| if (!x86_platform.legacy.rtc) |
| return -ENODEV; |
| |
| platform_device_register(&rtc_device); |
| dev_info(&rtc_device.dev, |
| "registered platform RTC device (no PNP device found)\n"); |
| |
| return 0; |
| } |
| device_initcall(add_rtc_cmos); |