| // SPDX-License-Identifier: GPL-2.0+ |
| |
| #include <linux/bits.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| #define RT5120_REG_PGSTAT 0x03 |
| #define RT5120_REG_CH1VID 0x06 |
| #define RT5120_REG_CH1SLPVID 0x07 |
| #define RT5120_REG_ENABLE 0x08 |
| #define RT5120_REG_MODECTL 0x09 |
| #define RT5120_REG_UVOVPROT 0x0A |
| #define RT5120_REG_SLPCTL 0x0C |
| #define RT5120_REG_INTSTAT 0x1E |
| #define RT5120_REG_DISCHG 0x1F |
| |
| #define RT5120_OUTPG_MASK(rid) BIT(rid + 1) |
| #define RT5120_OUTUV_MASK(rid) BIT(rid + 9) |
| #define RT5120_OUTOV_MASK(rid) BIT(rid + 16) |
| #define RT5120_CH1VID_MASK GENMASK(6, 0) |
| #define RT5120_RIDEN_MASK(rid) BIT(rid + 1) |
| #define RT5120_RADEN_MASK(rid) BIT(rid) |
| #define RT5120_FPWM_MASK(rid) BIT(rid + 1) |
| #define RT5120_UVHICCUP_MASK BIT(1) |
| #define RT5120_OVHICCUP_MASK BIT(0) |
| #define RT5120_HOTDIE_MASK BIT(1) |
| |
| #define RT5120_BUCK1_MINUV 600000 |
| #define RT5120_BUCK1_MAXUV 1393750 |
| #define RT5120_BUCK1_STEPUV 6250 |
| #define RT5120_BUCK1_NUM_VOLT 0x80 |
| |
| #define RT5120_AUTO_MODE 0 |
| #define RT5120_FPWM_MODE 1 |
| |
| enum { |
| RT5120_REGULATOR_BUCK1 = 0, |
| RT5120_REGULATOR_BUCK2, |
| RT5120_REGULATOR_BUCK3, |
| RT5120_REGULATOR_BUCK4, |
| RT5120_REGULATOR_LDO, |
| RT5120_REGULATOR_EXTEN, |
| RT5120_MAX_REGULATOR |
| }; |
| |
| struct rt5120_priv { |
| struct device *dev; |
| struct regmap *regmap; |
| struct regulator_desc rdesc[RT5120_MAX_REGULATOR]; |
| }; |
| |
| static int rt5120_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| struct regmap *regmap = rdev_get_regmap(rdev); |
| int rid = rdev_get_id(rdev); |
| unsigned int mask = RT5120_FPWM_MASK(rid), val; |
| |
| switch (mode) { |
| case REGULATOR_MODE_NORMAL: |
| val = 0; |
| break; |
| case REGULATOR_MODE_FAST: |
| val = RT5120_FPWM_MASK(rid); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return regmap_update_bits(regmap, RT5120_REG_MODECTL, mask, val); |
| } |
| |
| static unsigned int rt5120_buck_get_mode(struct regulator_dev *rdev) |
| { |
| struct regmap *regmap = rdev_get_regmap(rdev); |
| int ret, rid = rdev_get_id(rdev); |
| unsigned int val; |
| |
| ret = regmap_read(regmap, RT5120_REG_MODECTL, &val); |
| if (ret) |
| return REGULATOR_MODE_INVALID; |
| |
| if (val & RT5120_FPWM_MASK(rid)) |
| return REGULATOR_MODE_FAST; |
| |
| return REGULATOR_MODE_NORMAL; |
| } |
| |
| static int rt5120_regulator_get_error_flags(struct regulator_dev *rdev, |
| unsigned int *flags) |
| { |
| struct regmap *regmap = rdev_get_regmap(rdev); |
| unsigned int stat, hd_stat, cur_flags = 0; |
| int rid = rdev_get_id(rdev), ret; |
| |
| /* |
| * reg 0x03/0x04/0x05 to indicate PG/UV/OV |
| * use block read to descrease I/O xfer time |
| */ |
| ret = regmap_raw_read(regmap, RT5120_REG_PGSTAT, &stat, 3); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(regmap, RT5120_REG_INTSTAT, &hd_stat); |
| if (ret) |
| return ret; |
| |
| if (!(stat & RT5120_OUTPG_MASK(rid))) { |
| if (stat & RT5120_OUTUV_MASK(rid)) |
| cur_flags |= REGULATOR_ERROR_UNDER_VOLTAGE; |
| |
| if (stat & RT5120_OUTOV_MASK(rid)) |
| cur_flags |= REGULATOR_ERROR_REGULATION_OUT; |
| } |
| |
| if (hd_stat & RT5120_HOTDIE_MASK) |
| cur_flags |= REGULATOR_ERROR_OVER_TEMP; |
| |
| *flags = cur_flags; |
| return 0; |
| } |
| |
| static int rt5120_buck1_set_suspend_voltage(struct regulator_dev *rdev, int uV) |
| { |
| struct regmap *regmap = rdev_get_regmap(rdev); |
| int sel; |
| |
| if (uV < RT5120_BUCK1_MINUV || uV > RT5120_BUCK1_MAXUV) |
| return -EINVAL; |
| |
| sel = (uV - RT5120_BUCK1_MINUV) / RT5120_BUCK1_STEPUV; |
| return regmap_write(regmap, RT5120_REG_CH1SLPVID, sel); |
| } |
| |
| static int rt5120_regulator_set_suspend_enable(struct regulator_dev *rdev) |
| { |
| struct regmap *regmap = rdev_get_regmap(rdev); |
| int rid = rdev_get_id(rdev); |
| unsigned int mask = RT5120_RIDEN_MASK(rid); |
| |
| return regmap_update_bits(regmap, RT5120_REG_SLPCTL, mask, mask); |
| } |
| |
| static int rt5120_regulator_set_suspend_disable(struct regulator_dev *rdev) |
| { |
| struct regmap *regmap = rdev_get_regmap(rdev); |
| int rid = rdev_get_id(rdev); |
| unsigned int mask = RT5120_RIDEN_MASK(rid); |
| |
| return regmap_update_bits(regmap, RT5120_REG_SLPCTL, mask, 0); |
| } |
| |
| static const struct regulator_ops rt5120_buck1_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_active_discharge = regulator_set_active_discharge_regmap, |
| .set_mode = rt5120_buck_set_mode, |
| .get_mode = rt5120_buck_get_mode, |
| .get_error_flags = rt5120_regulator_get_error_flags, |
| .set_suspend_voltage = rt5120_buck1_set_suspend_voltage, |
| .set_suspend_enable = rt5120_regulator_set_suspend_enable, |
| .set_suspend_disable = rt5120_regulator_set_suspend_disable, |
| }; |
| |
| static const struct regulator_ops rt5120_buck234_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .set_active_discharge = regulator_set_active_discharge_regmap, |
| .set_mode = rt5120_buck_set_mode, |
| .get_mode = rt5120_buck_get_mode, |
| .get_error_flags = rt5120_regulator_get_error_flags, |
| .set_suspend_enable = rt5120_regulator_set_suspend_enable, |
| .set_suspend_disable = rt5120_regulator_set_suspend_disable, |
| }; |
| |
| static const struct regulator_ops rt5120_ldo_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .set_active_discharge = regulator_set_active_discharge_regmap, |
| .get_error_flags = rt5120_regulator_get_error_flags, |
| .set_suspend_enable = rt5120_regulator_set_suspend_enable, |
| .set_suspend_disable = rt5120_regulator_set_suspend_disable, |
| }; |
| |
| static const struct regulator_ops rt5120_exten_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .set_suspend_enable = rt5120_regulator_set_suspend_enable, |
| .set_suspend_disable = rt5120_regulator_set_suspend_disable, |
| }; |
| |
| static unsigned int rt5120_buck_of_map_mode(unsigned int mode) |
| { |
| switch (mode) { |
| case RT5120_AUTO_MODE: |
| return REGULATOR_MODE_NORMAL; |
| case RT5120_FPWM_MODE: |
| return REGULATOR_MODE_FAST; |
| default: |
| return REGULATOR_MODE_INVALID; |
| } |
| } |
| |
| static void rt5120_fillin_regulator_desc(struct regulator_desc *desc, int rid) |
| { |
| static const char * const name[] = { |
| "buck1", "buck2", "buck3", "buck4", "ldo", "exten" }; |
| static const char * const sname[] = { |
| "vin1", "vin2", "vin3", "vin4", "vinldo", NULL }; |
| |
| /* Common regulator property */ |
| desc->name = name[rid]; |
| desc->supply_name = sname[rid]; |
| desc->owner = THIS_MODULE; |
| desc->type = REGULATOR_VOLTAGE; |
| desc->id = rid; |
| desc->enable_reg = RT5120_REG_ENABLE; |
| desc->enable_mask = RT5120_RIDEN_MASK(rid); |
| desc->active_discharge_reg = RT5120_REG_DISCHG; |
| desc->active_discharge_mask = RT5120_RADEN_MASK(rid); |
| desc->active_discharge_on = RT5120_RADEN_MASK(rid); |
| /* Config n_voltages to 1 for all*/ |
| desc->n_voltages = 1; |
| |
| /* Only buck support mode change */ |
| if (rid >= RT5120_REGULATOR_BUCK1 && rid <= RT5120_REGULATOR_BUCK4) |
| desc->of_map_mode = rt5120_buck_of_map_mode; |
| |
| /* RID specific property init */ |
| switch (rid) { |
| case RT5120_REGULATOR_BUCK1: |
| /* Only buck1 support voltage change by I2C */ |
| desc->n_voltages = RT5120_BUCK1_NUM_VOLT; |
| desc->min_uV = RT5120_BUCK1_MINUV; |
| desc->uV_step = RT5120_BUCK1_STEPUV; |
| desc->vsel_reg = RT5120_REG_CH1VID, |
| desc->vsel_mask = RT5120_CH1VID_MASK, |
| desc->ops = &rt5120_buck1_ops; |
| break; |
| case RT5120_REGULATOR_BUCK2 ... RT5120_REGULATOR_BUCK4: |
| desc->ops = &rt5120_buck234_ops; |
| break; |
| case RT5120_REGULATOR_LDO: |
| desc->ops = &rt5120_ldo_ops; |
| break; |
| default: |
| desc->ops = &rt5120_exten_ops; |
| } |
| } |
| |
| static int rt5120_of_parse_cb(struct rt5120_priv *priv, int rid, |
| struct of_regulator_match *match) |
| { |
| struct regulator_desc *desc = priv->rdesc + rid; |
| struct regulator_init_data *init_data = match->init_data; |
| |
| if (!init_data || rid == RT5120_REGULATOR_BUCK1) |
| return 0; |
| |
| if (init_data->constraints.min_uV != init_data->constraints.max_uV) { |
| dev_err(priv->dev, "Variable voltage for fixed regulator\n"); |
| return -EINVAL; |
| } |
| |
| desc->fixed_uV = init_data->constraints.min_uV; |
| return 0; |
| } |
| |
| static struct of_regulator_match rt5120_regu_match[RT5120_MAX_REGULATOR] = { |
| [RT5120_REGULATOR_BUCK1] = { .name = "buck1", }, |
| [RT5120_REGULATOR_BUCK2] = { .name = "buck2", }, |
| [RT5120_REGULATOR_BUCK3] = { .name = "buck3", }, |
| [RT5120_REGULATOR_BUCK4] = { .name = "buck4", }, |
| [RT5120_REGULATOR_LDO] = { .name = "ldo", }, |
| [RT5120_REGULATOR_EXTEN] = { .name = "exten", } |
| }; |
| |
| static int rt5120_parse_regulator_dt_data(struct rt5120_priv *priv) |
| { |
| struct device *dev = priv->dev->parent; |
| struct device_node *reg_node; |
| int i, ret; |
| |
| for (i = 0; i < RT5120_MAX_REGULATOR; i++) { |
| rt5120_fillin_regulator_desc(priv->rdesc + i, i); |
| |
| rt5120_regu_match[i].desc = priv->rdesc + i; |
| } |
| |
| reg_node = of_get_child_by_name(dev->of_node, "regulators"); |
| if (!reg_node) { |
| dev_err(priv->dev, "Couldn't find 'regulators' node\n"); |
| return -ENODEV; |
| } |
| |
| ret = of_regulator_match(priv->dev, reg_node, rt5120_regu_match, |
| ARRAY_SIZE(rt5120_regu_match)); |
| |
| of_node_put(reg_node); |
| |
| if (ret < 0) { |
| dev_err(priv->dev, |
| "Error parsing regulator init data (%d)\n", ret); |
| return ret; |
| } |
| |
| for (i = 0; i < RT5120_MAX_REGULATOR; i++) { |
| ret = rt5120_of_parse_cb(priv, i, rt5120_regu_match + i); |
| if (ret) { |
| dev_err(priv->dev, "Failed in [%d] of_passe_cb\n", i); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int rt5120_device_property_init(struct rt5120_priv *priv) |
| { |
| struct device *dev = priv->dev->parent; |
| struct device_node *np = dev->of_node; |
| bool prot_enable; |
| unsigned int prot_enable_val = 0; |
| |
| /* Assign UV/OV HW protection behavior */ |
| prot_enable = of_property_read_bool(np, |
| "richtek,enable-undervolt-hiccup"); |
| if (prot_enable) |
| prot_enable_val |= RT5120_UVHICCUP_MASK; |
| |
| prot_enable = of_property_read_bool(np, |
| "richtek,enable-overvolt-hiccup"); |
| if (prot_enable) |
| prot_enable_val |= RT5120_OVHICCUP_MASK; |
| |
| return regmap_update_bits(priv->regmap, RT5120_REG_UVOVPROT, |
| RT5120_UVHICCUP_MASK | RT5120_OVHICCUP_MASK, |
| prot_enable_val); |
| } |
| |
| static int rt5120_regulator_probe(struct platform_device *pdev) |
| { |
| struct rt5120_priv *priv; |
| struct regulator_dev *rdev; |
| struct regulator_config config = {}; |
| int i, ret; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->dev = &pdev->dev; |
| |
| priv->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!priv->regmap) { |
| dev_err(&pdev->dev, "Failed to init regmap\n"); |
| return -ENODEV; |
| } |
| |
| ret = rt5120_device_property_init(priv); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to do property init\n"); |
| return ret; |
| } |
| |
| ret = rt5120_parse_regulator_dt_data(priv); |
| if (ret) { |
| dev_err(&pdev->dev, "Failed to parse dt data\n"); |
| return ret; |
| } |
| |
| config.dev = &pdev->dev; |
| config.regmap = priv->regmap; |
| |
| for (i = 0; i < RT5120_MAX_REGULATOR; i++) { |
| config.of_node = rt5120_regu_match[i].of_node; |
| config.init_data = rt5120_regu_match[i].init_data; |
| |
| rdev = devm_regulator_register(&pdev->dev, priv->rdesc + i, |
| &config); |
| if (IS_ERR(rdev)) { |
| dev_err(&pdev->dev, |
| "Failed to register regulator [%d]\n", i); |
| return PTR_ERR(rdev); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id rt5120_regulator_dev_table[] = { |
| { "rt5120-regulator", 0 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(platform, rt5120_regulator_dev_table); |
| |
| static struct platform_driver rt5120_regulator_driver = { |
| .driver = { |
| .name = "rt5120-regulator", |
| }, |
| .id_table = rt5120_regulator_dev_table, |
| .probe = rt5120_regulator_probe, |
| }; |
| module_platform_driver(rt5120_regulator_driver); |
| |
| MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); |
| MODULE_DESCRIPTION("Richtek RT5120 regulator driver"); |
| MODULE_LICENSE("GPL v2"); |