| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* include/asm-generic/tlb.h |
| * |
| * Generic TLB shootdown code |
| * |
| * Copyright 2001 Red Hat, Inc. |
| * Based on code from mm/memory.c Copyright Linus Torvalds and others. |
| * |
| * Copyright 2011 Red Hat, Inc., Peter Zijlstra |
| */ |
| #ifndef _ASM_GENERIC__TLB_H |
| #define _ASM_GENERIC__TLB_H |
| |
| #include <linux/mmu_notifier.h> |
| #include <linux/swap.h> |
| #include <linux/hugetlb_inline.h> |
| #include <asm/tlbflush.h> |
| #include <asm/cacheflush.h> |
| |
| /* |
| * Blindly accessing user memory from NMI context can be dangerous |
| * if we're in the middle of switching the current user task or switching |
| * the loaded mm. |
| */ |
| #ifndef nmi_uaccess_okay |
| # define nmi_uaccess_okay() true |
| #endif |
| |
| #ifdef CONFIG_MMU |
| |
| /* |
| * Generic MMU-gather implementation. |
| * |
| * The mmu_gather data structure is used by the mm code to implement the |
| * correct and efficient ordering of freeing pages and TLB invalidations. |
| * |
| * This correct ordering is: |
| * |
| * 1) unhook page |
| * 2) TLB invalidate page |
| * 3) free page |
| * |
| * That is, we must never free a page before we have ensured there are no live |
| * translations left to it. Otherwise it might be possible to observe (or |
| * worse, change) the page content after it has been reused. |
| * |
| * The mmu_gather API consists of: |
| * |
| * - tlb_gather_mmu() / tlb_gather_mmu_fullmm() / tlb_finish_mmu() |
| * |
| * start and finish a mmu_gather |
| * |
| * Finish in particular will issue a (final) TLB invalidate and free |
| * all (remaining) queued pages. |
| * |
| * - tlb_start_vma() / tlb_end_vma(); marks the start / end of a VMA |
| * |
| * Defaults to flushing at tlb_end_vma() to reset the range; helps when |
| * there's large holes between the VMAs. |
| * |
| * - tlb_remove_table() |
| * |
| * tlb_remove_table() is the basic primitive to free page-table directories |
| * (__p*_free_tlb()). In it's most primitive form it is an alias for |
| * tlb_remove_page() below, for when page directories are pages and have no |
| * additional constraints. |
| * |
| * See also MMU_GATHER_TABLE_FREE and MMU_GATHER_RCU_TABLE_FREE. |
| * |
| * - tlb_remove_page() / __tlb_remove_page() |
| * - tlb_remove_page_size() / __tlb_remove_page_size() |
| * |
| * __tlb_remove_page_size() is the basic primitive that queues a page for |
| * freeing. __tlb_remove_page() assumes PAGE_SIZE. Both will return a |
| * boolean indicating if the queue is (now) full and a call to |
| * tlb_flush_mmu() is required. |
| * |
| * tlb_remove_page() and tlb_remove_page_size() imply the call to |
| * tlb_flush_mmu() when required and has no return value. |
| * |
| * - tlb_change_page_size() |
| * |
| * call before __tlb_remove_page*() to set the current page-size; implies a |
| * possible tlb_flush_mmu() call. |
| * |
| * - tlb_flush_mmu() / tlb_flush_mmu_tlbonly() |
| * |
| * tlb_flush_mmu_tlbonly() - does the TLB invalidate (and resets |
| * related state, like the range) |
| * |
| * tlb_flush_mmu() - in addition to the above TLB invalidate, also frees |
| * whatever pages are still batched. |
| * |
| * - mmu_gather::fullmm |
| * |
| * A flag set by tlb_gather_mmu_fullmm() to indicate we're going to free |
| * the entire mm; this allows a number of optimizations. |
| * |
| * - We can ignore tlb_{start,end}_vma(); because we don't |
| * care about ranges. Everything will be shot down. |
| * |
| * - (RISC) architectures that use ASIDs can cycle to a new ASID |
| * and delay the invalidation until ASID space runs out. |
| * |
| * - mmu_gather::need_flush_all |
| * |
| * A flag that can be set by the arch code if it wants to force |
| * flush the entire TLB irrespective of the range. For instance |
| * x86-PAE needs this when changing top-level entries. |
| * |
| * And allows the architecture to provide and implement tlb_flush(): |
| * |
| * tlb_flush() may, in addition to the above mentioned mmu_gather fields, make |
| * use of: |
| * |
| * - mmu_gather::start / mmu_gather::end |
| * |
| * which provides the range that needs to be flushed to cover the pages to |
| * be freed. |
| * |
| * - mmu_gather::freed_tables |
| * |
| * set when we freed page table pages |
| * |
| * - tlb_get_unmap_shift() / tlb_get_unmap_size() |
| * |
| * returns the smallest TLB entry size unmapped in this range. |
| * |
| * If an architecture does not provide tlb_flush() a default implementation |
| * based on flush_tlb_range() will be used, unless MMU_GATHER_NO_RANGE is |
| * specified, in which case we'll default to flush_tlb_mm(). |
| * |
| * Additionally there are a few opt-in features: |
| * |
| * MMU_GATHER_PAGE_SIZE |
| * |
| * This ensures we call tlb_flush() every time tlb_change_page_size() actually |
| * changes the size and provides mmu_gather::page_size to tlb_flush(). |
| * |
| * This might be useful if your architecture has size specific TLB |
| * invalidation instructions. |
| * |
| * MMU_GATHER_TABLE_FREE |
| * |
| * This provides tlb_remove_table(), to be used instead of tlb_remove_page() |
| * for page directores (__p*_free_tlb()). |
| * |
| * Useful if your architecture has non-page page directories. |
| * |
| * When used, an architecture is expected to provide __tlb_remove_table() |
| * which does the actual freeing of these pages. |
| * |
| * MMU_GATHER_RCU_TABLE_FREE |
| * |
| * Like MMU_GATHER_TABLE_FREE, and adds semi-RCU semantics to the free (see |
| * comment below). |
| * |
| * Useful if your architecture doesn't use IPIs for remote TLB invalidates |
| * and therefore doesn't naturally serialize with software page-table walkers. |
| * |
| * MMU_GATHER_NO_FLUSH_CACHE |
| * |
| * Indicates the architecture has flush_cache_range() but it needs *NOT* be called |
| * before unmapping a VMA. |
| * |
| * NOTE: strictly speaking we shouldn't have this knob and instead rely on |
| * flush_cache_range() being a NOP, except Sparc64 seems to be |
| * different here. |
| * |
| * MMU_GATHER_MERGE_VMAS |
| * |
| * Indicates the architecture wants to merge ranges over VMAs; typical when |
| * multiple range invalidates are more expensive than a full invalidate. |
| * |
| * MMU_GATHER_NO_RANGE |
| * |
| * Use this if your architecture lacks an efficient flush_tlb_range(). This |
| * option implies MMU_GATHER_MERGE_VMAS above. |
| * |
| * MMU_GATHER_NO_GATHER |
| * |
| * If the option is set the mmu_gather will not track individual pages for |
| * delayed page free anymore. A platform that enables the option needs to |
| * provide its own implementation of the __tlb_remove_page_size() function to |
| * free pages. |
| * |
| * This is useful if your architecture already flushes TLB entries in the |
| * various ptep_get_and_clear() functions. |
| */ |
| |
| #ifdef CONFIG_MMU_GATHER_TABLE_FREE |
| |
| struct mmu_table_batch { |
| #ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE |
| struct rcu_head rcu; |
| #endif |
| unsigned int nr; |
| void *tables[]; |
| }; |
| |
| #define MAX_TABLE_BATCH \ |
| ((PAGE_SIZE - sizeof(struct mmu_table_batch)) / sizeof(void *)) |
| |
| extern void tlb_remove_table(struct mmu_gather *tlb, void *table); |
| |
| #else /* !CONFIG_MMU_GATHER_HAVE_TABLE_FREE */ |
| |
| /* |
| * Without MMU_GATHER_TABLE_FREE the architecture is assumed to have page based |
| * page directories and we can use the normal page batching to free them. |
| */ |
| #define tlb_remove_table(tlb, page) tlb_remove_page((tlb), (page)) |
| |
| #endif /* CONFIG_MMU_GATHER_TABLE_FREE */ |
| |
| #ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE |
| /* |
| * This allows an architecture that does not use the linux page-tables for |
| * hardware to skip the TLBI when freeing page tables. |
| */ |
| #ifndef tlb_needs_table_invalidate |
| #define tlb_needs_table_invalidate() (true) |
| #endif |
| |
| void tlb_remove_table_sync_one(void); |
| |
| #else |
| |
| #ifdef tlb_needs_table_invalidate |
| #error tlb_needs_table_invalidate() requires MMU_GATHER_RCU_TABLE_FREE |
| #endif |
| |
| static inline void tlb_remove_table_sync_one(void) { } |
| |
| #endif /* CONFIG_MMU_GATHER_RCU_TABLE_FREE */ |
| |
| |
| #ifndef CONFIG_MMU_GATHER_NO_GATHER |
| /* |
| * If we can't allocate a page to make a big batch of page pointers |
| * to work on, then just handle a few from the on-stack structure. |
| */ |
| #define MMU_GATHER_BUNDLE 8 |
| |
| struct mmu_gather_batch { |
| struct mmu_gather_batch *next; |
| unsigned int nr; |
| unsigned int max; |
| struct page *pages[]; |
| }; |
| |
| #define MAX_GATHER_BATCH \ |
| ((PAGE_SIZE - sizeof(struct mmu_gather_batch)) / sizeof(void *)) |
| |
| /* |
| * Limit the maximum number of mmu_gather batches to reduce a risk of soft |
| * lockups for non-preemptible kernels on huge machines when a lot of memory |
| * is zapped during unmapping. |
| * 10K pages freed at once should be safe even without a preemption point. |
| */ |
| #define MAX_GATHER_BATCH_COUNT (10000UL/MAX_GATHER_BATCH) |
| |
| extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page, |
| int page_size); |
| #endif |
| |
| /* |
| * struct mmu_gather is an opaque type used by the mm code for passing around |
| * any data needed by arch specific code for tlb_remove_page. |
| */ |
| struct mmu_gather { |
| struct mm_struct *mm; |
| |
| #ifdef CONFIG_MMU_GATHER_TABLE_FREE |
| struct mmu_table_batch *batch; |
| #endif |
| |
| unsigned long start; |
| unsigned long end; |
| /* |
| * we are in the middle of an operation to clear |
| * a full mm and can make some optimizations |
| */ |
| unsigned int fullmm : 1; |
| |
| /* |
| * we have performed an operation which |
| * requires a complete flush of the tlb |
| */ |
| unsigned int need_flush_all : 1; |
| |
| /* |
| * we have removed page directories |
| */ |
| unsigned int freed_tables : 1; |
| |
| /* |
| * at which levels have we cleared entries? |
| */ |
| unsigned int cleared_ptes : 1; |
| unsigned int cleared_pmds : 1; |
| unsigned int cleared_puds : 1; |
| unsigned int cleared_p4ds : 1; |
| |
| /* |
| * tracks VM_EXEC | VM_HUGETLB in tlb_start_vma |
| */ |
| unsigned int vma_exec : 1; |
| unsigned int vma_huge : 1; |
| unsigned int vma_pfn : 1; |
| |
| unsigned int batch_count; |
| |
| #ifndef CONFIG_MMU_GATHER_NO_GATHER |
| struct mmu_gather_batch *active; |
| struct mmu_gather_batch local; |
| struct page *__pages[MMU_GATHER_BUNDLE]; |
| |
| #ifdef CONFIG_MMU_GATHER_PAGE_SIZE |
| unsigned int page_size; |
| #endif |
| #endif |
| }; |
| |
| void tlb_flush_mmu(struct mmu_gather *tlb); |
| |
| static inline void __tlb_adjust_range(struct mmu_gather *tlb, |
| unsigned long address, |
| unsigned int range_size) |
| { |
| tlb->start = min(tlb->start, address); |
| tlb->end = max(tlb->end, address + range_size); |
| } |
| |
| static inline void __tlb_reset_range(struct mmu_gather *tlb) |
| { |
| if (tlb->fullmm) { |
| tlb->start = tlb->end = ~0; |
| } else { |
| tlb->start = TASK_SIZE; |
| tlb->end = 0; |
| } |
| tlb->freed_tables = 0; |
| tlb->cleared_ptes = 0; |
| tlb->cleared_pmds = 0; |
| tlb->cleared_puds = 0; |
| tlb->cleared_p4ds = 0; |
| /* |
| * Do not reset mmu_gather::vma_* fields here, we do not |
| * call into tlb_start_vma() again to set them if there is an |
| * intermediate flush. |
| */ |
| } |
| |
| #ifdef CONFIG_MMU_GATHER_NO_RANGE |
| |
| #if defined(tlb_flush) |
| #error MMU_GATHER_NO_RANGE relies on default tlb_flush() |
| #endif |
| |
| /* |
| * When an architecture does not have efficient means of range flushing TLBs |
| * there is no point in doing intermediate flushes on tlb_end_vma() to keep the |
| * range small. We equally don't have to worry about page granularity or other |
| * things. |
| * |
| * All we need to do is issue a full flush for any !0 range. |
| */ |
| static inline void tlb_flush(struct mmu_gather *tlb) |
| { |
| if (tlb->end) |
| flush_tlb_mm(tlb->mm); |
| } |
| |
| #else /* CONFIG_MMU_GATHER_NO_RANGE */ |
| |
| #ifndef tlb_flush |
| /* |
| * When an architecture does not provide its own tlb_flush() implementation |
| * but does have a reasonably efficient flush_vma_range() implementation |
| * use that. |
| */ |
| static inline void tlb_flush(struct mmu_gather *tlb) |
| { |
| if (tlb->fullmm || tlb->need_flush_all) { |
| flush_tlb_mm(tlb->mm); |
| } else if (tlb->end) { |
| struct vm_area_struct vma = { |
| .vm_mm = tlb->mm, |
| .vm_flags = (tlb->vma_exec ? VM_EXEC : 0) | |
| (tlb->vma_huge ? VM_HUGETLB : 0), |
| }; |
| |
| flush_tlb_range(&vma, tlb->start, tlb->end); |
| } |
| } |
| #endif |
| |
| #endif /* CONFIG_MMU_GATHER_NO_RANGE */ |
| |
| static inline void |
| tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma) |
| { |
| /* |
| * flush_tlb_range() implementations that look at VM_HUGETLB (tile, |
| * mips-4k) flush only large pages. |
| * |
| * flush_tlb_range() implementations that flush I-TLB also flush D-TLB |
| * (tile, xtensa, arm), so it's ok to just add VM_EXEC to an existing |
| * range. |
| * |
| * We rely on tlb_end_vma() to issue a flush, such that when we reset |
| * these values the batch is empty. |
| */ |
| tlb->vma_huge = is_vm_hugetlb_page(vma); |
| tlb->vma_exec = !!(vma->vm_flags & VM_EXEC); |
| tlb->vma_pfn = !!(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)); |
| } |
| |
| static inline void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb) |
| { |
| /* |
| * Anything calling __tlb_adjust_range() also sets at least one of |
| * these bits. |
| */ |
| if (!(tlb->freed_tables || tlb->cleared_ptes || tlb->cleared_pmds || |
| tlb->cleared_puds || tlb->cleared_p4ds)) |
| return; |
| |
| tlb_flush(tlb); |
| mmu_notifier_invalidate_range(tlb->mm, tlb->start, tlb->end); |
| __tlb_reset_range(tlb); |
| } |
| |
| static inline void tlb_remove_page_size(struct mmu_gather *tlb, |
| struct page *page, int page_size) |
| { |
| if (__tlb_remove_page_size(tlb, page, page_size)) |
| tlb_flush_mmu(tlb); |
| } |
| |
| static inline bool __tlb_remove_page(struct mmu_gather *tlb, struct page *page) |
| { |
| return __tlb_remove_page_size(tlb, page, PAGE_SIZE); |
| } |
| |
| /* tlb_remove_page |
| * Similar to __tlb_remove_page but will call tlb_flush_mmu() itself when |
| * required. |
| */ |
| static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) |
| { |
| return tlb_remove_page_size(tlb, page, PAGE_SIZE); |
| } |
| |
| static inline void tlb_change_page_size(struct mmu_gather *tlb, |
| unsigned int page_size) |
| { |
| #ifdef CONFIG_MMU_GATHER_PAGE_SIZE |
| if (tlb->page_size && tlb->page_size != page_size) { |
| if (!tlb->fullmm && !tlb->need_flush_all) |
| tlb_flush_mmu(tlb); |
| } |
| |
| tlb->page_size = page_size; |
| #endif |
| } |
| |
| static inline unsigned long tlb_get_unmap_shift(struct mmu_gather *tlb) |
| { |
| if (tlb->cleared_ptes) |
| return PAGE_SHIFT; |
| if (tlb->cleared_pmds) |
| return PMD_SHIFT; |
| if (tlb->cleared_puds) |
| return PUD_SHIFT; |
| if (tlb->cleared_p4ds) |
| return P4D_SHIFT; |
| |
| return PAGE_SHIFT; |
| } |
| |
| static inline unsigned long tlb_get_unmap_size(struct mmu_gather *tlb) |
| { |
| return 1UL << tlb_get_unmap_shift(tlb); |
| } |
| |
| /* |
| * In the case of tlb vma handling, we can optimise these away in the |
| * case where we're doing a full MM flush. When we're doing a munmap, |
| * the vmas are adjusted to only cover the region to be torn down. |
| */ |
| static inline void tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) |
| { |
| if (tlb->fullmm) |
| return; |
| |
| tlb_update_vma_flags(tlb, vma); |
| #ifndef CONFIG_MMU_GATHER_NO_FLUSH_CACHE |
| flush_cache_range(vma, vma->vm_start, vma->vm_end); |
| #endif |
| } |
| |
| static inline void tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) |
| { |
| if (tlb->fullmm) |
| return; |
| |
| /* |
| * VM_PFNMAP is more fragile because the core mm will not track the |
| * page mapcount -- there might not be page-frames for these PFNs after |
| * all. Force flush TLBs for such ranges to avoid munmap() vs |
| * unmap_mapping_range() races. |
| */ |
| if (tlb->vma_pfn || !IS_ENABLED(CONFIG_MMU_GATHER_MERGE_VMAS)) { |
| /* |
| * Do a TLB flush and reset the range at VMA boundaries; this avoids |
| * the ranges growing with the unused space between consecutive VMAs. |
| */ |
| tlb_flush_mmu_tlbonly(tlb); |
| } |
| } |
| |
| /* |
| * tlb_flush_{pte|pmd|pud|p4d}_range() adjust the tlb->start and tlb->end, |
| * and set corresponding cleared_*. |
| */ |
| static inline void tlb_flush_pte_range(struct mmu_gather *tlb, |
| unsigned long address, unsigned long size) |
| { |
| __tlb_adjust_range(tlb, address, size); |
| tlb->cleared_ptes = 1; |
| } |
| |
| static inline void tlb_flush_pmd_range(struct mmu_gather *tlb, |
| unsigned long address, unsigned long size) |
| { |
| __tlb_adjust_range(tlb, address, size); |
| tlb->cleared_pmds = 1; |
| } |
| |
| static inline void tlb_flush_pud_range(struct mmu_gather *tlb, |
| unsigned long address, unsigned long size) |
| { |
| __tlb_adjust_range(tlb, address, size); |
| tlb->cleared_puds = 1; |
| } |
| |
| static inline void tlb_flush_p4d_range(struct mmu_gather *tlb, |
| unsigned long address, unsigned long size) |
| { |
| __tlb_adjust_range(tlb, address, size); |
| tlb->cleared_p4ds = 1; |
| } |
| |
| #ifndef __tlb_remove_tlb_entry |
| #define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) |
| #endif |
| |
| /** |
| * tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation. |
| * |
| * Record the fact that pte's were really unmapped by updating the range, |
| * so we can later optimise away the tlb invalidate. This helps when |
| * userspace is unmapping already-unmapped pages, which happens quite a lot. |
| */ |
| #define tlb_remove_tlb_entry(tlb, ptep, address) \ |
| do { \ |
| tlb_flush_pte_range(tlb, address, PAGE_SIZE); \ |
| __tlb_remove_tlb_entry(tlb, ptep, address); \ |
| } while (0) |
| |
| #define tlb_remove_huge_tlb_entry(h, tlb, ptep, address) \ |
| do { \ |
| unsigned long _sz = huge_page_size(h); \ |
| if (_sz >= P4D_SIZE) \ |
| tlb_flush_p4d_range(tlb, address, _sz); \ |
| else if (_sz >= PUD_SIZE) \ |
| tlb_flush_pud_range(tlb, address, _sz); \ |
| else if (_sz >= PMD_SIZE) \ |
| tlb_flush_pmd_range(tlb, address, _sz); \ |
| else \ |
| tlb_flush_pte_range(tlb, address, _sz); \ |
| __tlb_remove_tlb_entry(tlb, ptep, address); \ |
| } while (0) |
| |
| /** |
| * tlb_remove_pmd_tlb_entry - remember a pmd mapping for later tlb invalidation |
| * This is a nop so far, because only x86 needs it. |
| */ |
| #ifndef __tlb_remove_pmd_tlb_entry |
| #define __tlb_remove_pmd_tlb_entry(tlb, pmdp, address) do {} while (0) |
| #endif |
| |
| #define tlb_remove_pmd_tlb_entry(tlb, pmdp, address) \ |
| do { \ |
| tlb_flush_pmd_range(tlb, address, HPAGE_PMD_SIZE); \ |
| __tlb_remove_pmd_tlb_entry(tlb, pmdp, address); \ |
| } while (0) |
| |
| /** |
| * tlb_remove_pud_tlb_entry - remember a pud mapping for later tlb |
| * invalidation. This is a nop so far, because only x86 needs it. |
| */ |
| #ifndef __tlb_remove_pud_tlb_entry |
| #define __tlb_remove_pud_tlb_entry(tlb, pudp, address) do {} while (0) |
| #endif |
| |
| #define tlb_remove_pud_tlb_entry(tlb, pudp, address) \ |
| do { \ |
| tlb_flush_pud_range(tlb, address, HPAGE_PUD_SIZE); \ |
| __tlb_remove_pud_tlb_entry(tlb, pudp, address); \ |
| } while (0) |
| |
| /* |
| * For things like page tables caches (ie caching addresses "inside" the |
| * page tables, like x86 does), for legacy reasons, flushing an |
| * individual page had better flush the page table caches behind it. This |
| * is definitely how x86 works, for example. And if you have an |
| * architected non-legacy page table cache (which I'm not aware of |
| * anybody actually doing), you're going to have some architecturally |
| * explicit flushing for that, likely *separate* from a regular TLB entry |
| * flush, and thus you'd need more than just some range expansion.. |
| * |
| * So if we ever find an architecture |
| * that would want something that odd, I think it is up to that |
| * architecture to do its own odd thing, not cause pain for others |
| * http://lkml.kernel.org/r/CA+55aFzBggoXtNXQeng5d_mRoDnaMBE5Y+URs+PHR67nUpMtaw@mail.gmail.com |
| * |
| * For now w.r.t page table cache, mark the range_size as PAGE_SIZE |
| */ |
| |
| #ifndef pte_free_tlb |
| #define pte_free_tlb(tlb, ptep, address) \ |
| do { \ |
| tlb_flush_pmd_range(tlb, address, PAGE_SIZE); \ |
| tlb->freed_tables = 1; \ |
| __pte_free_tlb(tlb, ptep, address); \ |
| } while (0) |
| #endif |
| |
| #ifndef pmd_free_tlb |
| #define pmd_free_tlb(tlb, pmdp, address) \ |
| do { \ |
| tlb_flush_pud_range(tlb, address, PAGE_SIZE); \ |
| tlb->freed_tables = 1; \ |
| __pmd_free_tlb(tlb, pmdp, address); \ |
| } while (0) |
| #endif |
| |
| #ifndef pud_free_tlb |
| #define pud_free_tlb(tlb, pudp, address) \ |
| do { \ |
| tlb_flush_p4d_range(tlb, address, PAGE_SIZE); \ |
| tlb->freed_tables = 1; \ |
| __pud_free_tlb(tlb, pudp, address); \ |
| } while (0) |
| #endif |
| |
| #ifndef p4d_free_tlb |
| #define p4d_free_tlb(tlb, pudp, address) \ |
| do { \ |
| __tlb_adjust_range(tlb, address, PAGE_SIZE); \ |
| tlb->freed_tables = 1; \ |
| __p4d_free_tlb(tlb, pudp, address); \ |
| } while (0) |
| #endif |
| |
| #ifndef pte_needs_flush |
| static inline bool pte_needs_flush(pte_t oldpte, pte_t newpte) |
| { |
| return true; |
| } |
| #endif |
| |
| #ifndef huge_pmd_needs_flush |
| static inline bool huge_pmd_needs_flush(pmd_t oldpmd, pmd_t newpmd) |
| { |
| return true; |
| } |
| #endif |
| |
| #endif /* CONFIG_MMU */ |
| |
| #endif /* _ASM_GENERIC__TLB_H */ |