blob: 2b1f9d0fb510aa002659624f9f853e6cd113cb7f [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-apq8084.h>
#include <dt-bindings/gpio/gpio.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "Qualcomm APQ 8084";
compatible = "qcom,apq8084";
interrupt-parent = <&intc>;
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
smem_mem: smem_region@fa00000 {
reg = <0xfa00000 0x200000>;
no-map;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "qcom,krait";
reg = <0>;
enable-method = "qcom,kpss-acc-v2";
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
cpu-idle-states = <&CPU_SPC>;
};
cpu@1 {
device_type = "cpu";
compatible = "qcom,krait";
reg = <1>;
enable-method = "qcom,kpss-acc-v2";
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
cpu-idle-states = <&CPU_SPC>;
};
cpu@2 {
device_type = "cpu";
compatible = "qcom,krait";
reg = <2>;
enable-method = "qcom,kpss-acc-v2";
next-level-cache = <&L2>;
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
cpu-idle-states = <&CPU_SPC>;
};
cpu@3 {
device_type = "cpu";
compatible = "qcom,krait";
reg = <3>;
enable-method = "qcom,kpss-acc-v2";
next-level-cache = <&L2>;
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
cpu-idle-states = <&CPU_SPC>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
qcom,saw = <&saw_l2>;
};
idle-states {
CPU_SPC: spc {
compatible = "qcom,idle-state-spc",
"arm,idle-state";
entry-latency-us = <150>;
exit-latency-us = <200>;
min-residency-us = <2000>;
};
};
};
memory {
device_type = "memory";
reg = <0x0 0x0>;
};
firmware {
scm {
compatible = "qcom,scm-apq8084", "qcom,scm";
clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
clock-names = "core", "bus", "iface";
};
};
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 5>;
trips {
cpu_alert0: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit0: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 6>;
trips {
cpu_alert1: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit1: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 7>;
trips {
cpu_alert2: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit2: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 8>;
trips {
cpu_alert3: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit3: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
cpu-pmu {
compatible = "qcom,krait-pmu";
interrupts = <GIC_PPI 7 0xf04>;
};
clocks {
xo_board: xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 2 0xf08>,
<GIC_PPI 3 0xf08>,
<GIC_PPI 4 0xf08>,
<GIC_PPI 1 0xf08>;
clock-frequency = <19200000>;
};
smem {
compatible = "qcom,smem";
qcom,rpm-msg-ram = <&rpm_msg_ram>;
memory-region = <&smem_mem>;
hwlocks = <&tcsr_mutex 3>;
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
intc: interrupt-controller@f9000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0xf9000000 0x1000>,
<0xf9002000 0x1000>;
};
apcs: syscon@f9011000 {
compatible = "syscon";
reg = <0xf9011000 0x1000>;
};
sram@fc190000 {
compatible = "qcom,apq8084-rpm-stats";
reg = <0xfc190000 0x10000>;
};
qfprom: qfprom@fc4bc000 {
compatible = "qcom,apq8084-qfprom", "qcom,qfprom";
reg = <0xfc4bc000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
tsens_base1: base1@d0 {
reg = <0xd0 0x1>;
bits = <0 8>;
};
tsens_s0_p1: s0-p1@d1 {
reg = <0xd1 0x1>;
bits = <0 6>;
};
tsens_s1_p1: s1-p1@d2 {
reg = <0xd1 0x2>;
bits = <6 6>;
};
tsens_s2_p1: s2-p1@d2 {
reg = <0xd2 0x2>;
bits = <4 6>;
};
tsens_s3_p1: s3-p1@d3 {
reg = <0xd3 0x1>;
bits = <2 6>;
};
tsens_s4_p1: s4-p1@d4 {
reg = <0xd4 0x1>;
bits = <0 6>;
};
tsens_s5_p1: s5-p1@d4 {
reg = <0xd4 0x2>;
bits = <6 6>;
};
tsens_s6_p1: s6-p1@d5 {
reg = <0xd5 0x2>;
bits = <4 6>;
};
tsens_s7_p1: s7-p1@d6 {
reg = <0xd6 0x1>;
bits = <2 6>;
};
tsens_s8_p1: s8-p1@d7 {
reg = <0xd7 0x1>;
bits = <0 6>;
};
tsens_mode: mode@d7 {
reg = <0xd7 0x1>;
bits = <6 2>;
};
tsens_s9_p1: s9-p1@d8 {
reg = <0xd8 0x1>;
bits = <0 6>;
};
tsens_s10_p1: s10_p1@d8 {
reg = <0xd8 0x2>;
bits = <6 6>;
};
tsens_base2: base2@d9 {
reg = <0xd9 0x2>;
bits = <4 8>;
};
tsens_s0_p2: s0-p2@da {
reg = <0xda 0x2>;
bits = <4 6>;
};
tsens_s1_p2: s1-p2@db {
reg = <0xdb 0x1>;
bits = <2 6>;
};
tsens_s2_p2: s2-p2@dc {
reg = <0xdc 0x1>;
bits = <0 6>;
};
tsens_s3_p2: s3-p2@dc {
reg = <0xdc 0x2>;
bits = <6 6>;
};
tsens_s4_p2: s4-p2@dd {
reg = <0xdd 0x2>;
bits = <4 6>;
};
tsens_s5_p2: s5-p2@de {
reg = <0xde 0x2>;
bits = <2 6>;
};
tsens_s6_p2: s6-p2@df {
reg = <0xdf 0x1>;
bits = <0 6>;
};
tsens_s7_p2: s7-p2@e0 {
reg = <0xe0 0x1>;
bits = <0 6>;
};
tsens_s8_p2: s8-p2@e0 {
reg = <0xe0 0x2>;
bits = <6 6>;
};
tsens_s9_p2: s9-p2@e1 {
reg = <0xe1 0x2>;
bits = <4 6>;
};
tsens_s10_p2: s10_p2@e2 {
reg = <0xe2 0x2>;
bits = <2 6>;
};
tsens_s5_p2_backup: s5-p2_backup@e3 {
reg = <0xe3 0x2>;
bits = <0 6>;
};
tsens_mode_backup: mode_backup@e3 {
reg = <0xe3 0x1>;
bits = <6 2>;
};
tsens_s6_p2_backup: s6-p2_backup@e4 {
reg = <0xe4 0x1>;
bits = <0 6>;
};
tsens_s7_p2_backup: s7-p2_backup@e4 {
reg = <0xe4 0x2>;
bits = <6 6>;
};
tsens_s8_p2_backup: s8-p2_backup@e5 {
reg = <0xe5 0x2>;
bits = <4 6>;
};
tsens_s9_p2_backup: s9-p2_backup@e6 {
reg = <0xe6 0x2>;
bits = <2 6>;
};
tsens_s10_p2_backup: s10_p2_backup@e7 {
reg = <0xe7 0x1>;
bits = <0 6>;
};
tsens_base1_backup: base1_backup@440 {
reg = <0x440 0x1>;
bits = <0 8>;
};
tsens_s0_p1_backup: s0-p1_backup@441 {
reg = <0x441 0x1>;
bits = <0 6>;
};
tsens_s1_p1_backup: s1-p1_backup@442 {
reg = <0x441 0x2>;
bits = <6 6>;
};
tsens_s2_p1_backup: s2-p1_backup@442 {
reg = <0x442 0x2>;
bits = <4 6>;
};
tsens_s3_p1_backup: s3-p1_backup@443 {
reg = <0x443 0x1>;
bits = <2 6>;
};
tsens_s4_p1_backup: s4-p1_backup@444 {
reg = <0x444 0x1>;
bits = <0 6>;
};
tsens_s5_p1_backup: s5-p1_backup@444 {
reg = <0x444 0x2>;
bits = <6 6>;
};
tsens_s6_p1_backup: s6-p1_backup@445 {
reg = <0x445 0x2>;
bits = <4 6>;
};
tsens_s7_p1_backup: s7-p1_backup@446 {
reg = <0x446 0x1>;
bits = <2 6>;
};
tsens_use_backup: use_backup@447 {
reg = <0x447 0x1>;
bits = <5 3>;
};
tsens_s8_p1_backup: s8-p1_backup@448 {
reg = <0x448 0x1>;
bits = <0 6>;
};
tsens_s9_p1_backup: s9-p1_backup@448 {
reg = <0x448 0x2>;
bits = <6 6>;
};
tsens_s10_p1_backup: s10_p1_backup@449 {
reg = <0x449 0x2>;
bits = <4 6>;
};
tsens_base2_backup: base2_backup@44a {
reg = <0x44a 0x2>;
bits = <2 8>;
};
tsens_s0_p2_backup: s0-p2_backup@44b {
reg = <0x44b 0x3>;
bits = <2 6>;
};
tsens_s1_p2_backup: s1-p2_backup@44c {
reg = <0x44c 0x1>;
bits = <0 6>;
};
tsens_s2_p2_backup: s2-p2_backup@44c {
reg = <0x44c 0x2>;
bits = <6 6>;
};
tsens_s3_p2_backup: s3-p2_backup@44d {
reg = <0x44d 0x2>;
bits = <4 6>;
};
tsens_s4_p2_backup: s4-p2_backup@44e {
reg = <0x44e 0x1>;
bits = <2 6>;
};
};
tsens: thermal-sensor@fc4a9000 {
compatible = "qcom,msm8974-tsens", "qcom,tsens-v0_1";
reg = <0xfc4a9000 0x1000>, /* TM */
<0xfc4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_mode>,
<&tsens_base1>, <&tsens_base2>,
<&tsens_use_backup>,
<&tsens_mode_backup>,
<&tsens_base1_backup>, <&tsens_base2_backup>,
<&tsens_s0_p1>, <&tsens_s0_p2>,
<&tsens_s1_p1>, <&tsens_s1_p2>,
<&tsens_s2_p1>, <&tsens_s2_p2>,
<&tsens_s3_p1>, <&tsens_s3_p2>,
<&tsens_s4_p1>, <&tsens_s4_p2>,
<&tsens_s5_p1>, <&tsens_s5_p2>,
<&tsens_s6_p1>, <&tsens_s6_p2>,
<&tsens_s7_p1>, <&tsens_s7_p2>,
<&tsens_s8_p1>, <&tsens_s8_p2>,
<&tsens_s9_p1>, <&tsens_s9_p2>,
<&tsens_s10_p1>, <&tsens_s10_p2>,
<&tsens_s0_p1_backup>, <&tsens_s0_p2_backup>,
<&tsens_s1_p1_backup>, <&tsens_s1_p2_backup>,
<&tsens_s2_p1_backup>, <&tsens_s2_p2_backup>,
<&tsens_s3_p1_backup>, <&tsens_s3_p2_backup>,
<&tsens_s4_p1_backup>, <&tsens_s4_p2_backup>,
<&tsens_s5_p1_backup>, <&tsens_s5_p2_backup>,
<&tsens_s6_p1_backup>, <&tsens_s6_p2_backup>,
<&tsens_s7_p1_backup>, <&tsens_s7_p2_backup>,
<&tsens_s8_p1_backup>, <&tsens_s8_p2_backup>,
<&tsens_s9_p1_backup>, <&tsens_s9_p2_backup>,
<&tsens_s10_p1_backup>, <&tsens_s10_p2_backup>;
nvmem-cell-names = "mode",
"base1", "base2",
"use_backup",
"mode_backup",
"base1_backup", "base2_backup",
"s0_p1", "s0_p2",
"s1_p1", "s1_p2",
"s2_p1", "s2_p2",
"s3_p1", "s3_p2",
"s4_p1", "s4_p2",
"s5_p1", "s5_p2",
"s6_p1", "s6_p2",
"s7_p1", "s7_p2",
"s8_p1", "s8_p2",
"s9_p1", "s9_p2",
"s10_p1", "s10_p2",
"s0_p1_backup", "s0_p2_backup",
"s1_p1_backup", "s1_p2_backup",
"s2_p1_backup", "s2_p2_backup",
"s3_p1_backup", "s3_p2_backup",
"s4_p1_backup", "s4_p2_backup",
"s5_p1_backup", "s5_p2_backup",
"s6_p1_backup", "s6_p2_backup",
"s7_p1_backup", "s7_p2_backup",
"s8_p1_backup", "s8_p2_backup",
"s9_p1_backup", "s9_p2_backup",
"s10_p1_backup", "s10_p2_backup";
#qcom,sensors = <11>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0xf9020000 0x1000>;
clock-frequency = <19200000>;
frame@f9021000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
};
saw0: power-controller@f9089000 {
compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
};
saw1: power-controller@f9099000 {
compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
};
saw2: power-controller@f90a9000 {
compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
};
saw3: power-controller@f90b9000 {
compatible = "qcom,apq8084-saw2-v2.1-cpu", "qcom,saw2";
reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
};
saw_l2: power-controller@f9012000 {
compatible = "qcom,saw2";
reg = <0xf9012000 0x1000>;
regulator;
};
acc0: power-manager@f9088000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf9088000 0x1000>,
<0xf9008000 0x1000>;
};
acc1: power-manager@f9098000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf9098000 0x1000>,
<0xf9008000 0x1000>;
};
acc2: power-manager@f90a8000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf90a8000 0x1000>,
<0xf9008000 0x1000>;
};
acc3: power-manager@f90b8000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf90b8000 0x1000>,
<0xf9008000 0x1000>;
};
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
};
gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-apq8084";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xfc400000 0x4000>;
clocks = <&xo_board>,
<&sleep_clk>,
<0>, /* ufs */
<0>,
<0>,
<0>,
<0>, /* sata */
<0>,
<0>; /* pcie */
clock-names = "xo",
"sleep_clk",
"ufs_rx_symbol_0_clk_src",
"ufs_rx_symbol_1_clk_src",
"ufs_tx_symbol_0_clk_src",
"ufs_tx_symbol_1_clk_src",
"sata_asic0_clk",
"sata_rx_clk",
"pcie_pipe";
};
tcsr_mutex: hwlock@fd484000 {
compatible = "qcom,apq8084-tcsr-mutex", "qcom,tcsr-mutex";
reg = <0xfd484000 0x1000>;
#hwlock-cells = <1>;
};
rpm_msg_ram: sram@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
};
tlmm: pinctrl@fd510000 {
compatible = "qcom,apq8084-pinctrl";
reg = <0xfd510000 0x4000>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 147>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
blsp2_uart2: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
sdhc_1: mmc@f9824900 {
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
status = "disabled";
};
sdhc_2: mmc@f98a4900 {
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&xo_board>;
clock-names = "iface", "core", "xo";
status = "disabled";
};
spmi_bus: spmi@fc4cf000 {
compatible = "qcom,spmi-pmic-arb";
reg-names = "core", "intr", "cnfg";
reg = <0xfc4cf000 0x1000>,
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
};
rpm: remoteproc {
compatible = "qcom,apq8084-rpm-proc", "qcom,rpm-proc";
smd-edge {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
rpm-requests {
compatible = "qcom,rpm-apq8084";
qcom,smd-channels = "rpm_requests";
regulators-0 {
compatible = "qcom,rpm-pma8084-regulators";
pma8084_s1: s1 {};
pma8084_s2: s2 {};
pma8084_s3: s3 {};
pma8084_s4: s4 {};
pma8084_s5: s5 {};
pma8084_s6: s6 {};
pma8084_s7: s7 {};
pma8084_s8: s8 {};
pma8084_s9: s9 {};
pma8084_s10: s10 {};
pma8084_s11: s11 {};
pma8084_s12: s12 {};
pma8084_l1: l1 {};
pma8084_l2: l2 {};
pma8084_l3: l3 {};
pma8084_l4: l4 {};
pma8084_l5: l5 {};
pma8084_l6: l6 {};
pma8084_l7: l7 {};
pma8084_l8: l8 {};
pma8084_l9: l9 {};
pma8084_l10: l10 {};
pma8084_l11: l11 {};
pma8084_l12: l12 {};
pma8084_l13: l13 {};
pma8084_l14: l14 {};
pma8084_l15: l15 {};
pma8084_l16: l16 {};
pma8084_l17: l17 {};
pma8084_l18: l18 {};
pma8084_l19: l19 {};
pma8084_l20: l20 {};
pma8084_l21: l21 {};
pma8084_l22: l22 {};
pma8084_l23: l23 {};
pma8084_l24: l24 {};
pma8084_l25: l25 {};
pma8084_l26: l26 {};
pma8084_l27: l27 {};
pma8084_lvs1: lvs1 {};
pma8084_lvs2: lvs2 {};
pma8084_lvs3: lvs3 {};
pma8084_lvs4: lvs4 {};
pma8084_5vs1: 5vs1 {};
};
};
};
};
};