blob: b492c95e5d301d25d6e9446081940bcb52a94569 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
*/
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,gcc-msm8974.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
chosen { };
memory@0 {
device_type = "memory";
reg = <0x0 0x0>;
};
clocks {
xo_board: xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
firmware {
scm {
compatible = "qcom,scm-msm8226", "qcom,scm";
clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
clock-names = "core", "bus", "iface";
};
};
pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
IRQ_TYPE_LEVEL_HIGH)>;
};
rpm: remoteproc {
compatible = "qcom,msm8226-rpm-proc", "qcom,rpm-proc";
master-stats {
compatible = "qcom,rpm-master-stats";
qcom,rpm-msg-ram = <&apss_master_stats>,
<&mpss_master_stats>,
<&lpss_master_stats>,
<&pronto_master_stats>;
qcom,master-names = "APSS",
"MPSS",
"LPSS",
"PRONTO";
};
smd-edge {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8226";
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-msm8226", "qcom,rpmcc";
#clock-cells = <1>;
clocks = <&xo_board>;
clock-names = "xo";
};
rpmpd: power-controller {
compatible = "qcom,msm8226-rpmpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmpd_opp_table>;
rpmpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmpd_opp_ret: opp1 {
opp-level = <1>;
};
rpmpd_opp_svs_krait: opp2 {
opp-level = <2>;
};
rpmpd_opp_svs_soc: opp3 {
opp-level = <3>;
};
rpmpd_opp_nom: opp4 {
opp-level = <4>;
};
rpmpd_opp_turbo: opp5 {
opp-level = <5>;
};
rpmpd_opp_super_turbo: opp6 {
opp-level = <6>;
};
};
};
};
};
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
smem_region: smem@3000000 {
reg = <0x3000000 0x100000>;
no-map;
};
adsp_region: adsp@dc00000 {
reg = <0x0dc00000 0x1900000>;
no-map;
};
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
hwlocks = <&tcsr_mutex 3>;
};
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
intc: interrupt-controller@f9000000 {
compatible = "qcom,msm-qgic2";
reg = <0xf9000000 0x1000>,
<0xf9002000 0x1000>;
interrupt-controller;
#interrupt-cells = <3>;
};
apcs: syscon@f9011000 {
compatible = "syscon";
reg = <0xf9011000 0x1000>;
};
sdhc_1: mmc@f9824900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
pinctrl-names = "default";
pinctrl-0 = <&sdhc1_default_state>;
status = "disabled";
};
sdhc_2: mmc@f98a4900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
pinctrl-names = "default";
pinctrl-0 = <&sdhc2_default_state>;
status = "disabled";
};
sdhc_3: mmc@f9864900 {
compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC3_AHB_CLK>,
<&gcc GCC_SDCC3_APPS_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface", "core", "xo";
pinctrl-names = "default";
pinctrl-0 = <&sdhc3_default_state>;
status = "disabled";
};
blsp1_uart1: serial@f991d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991d000 0x1000>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core",
"iface";
status = "disabled";
};
blsp1_uart3: serial@f991f000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991f000 0x1000>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart4: serial@f9920000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf9920000 0x1000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_i2c1: i2c@f9923000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9923000 0x1000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c1_pins>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c2: i2c@f9924000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9924000 0x1000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c2_pins>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c3: i2c@f9925000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9925000 0x1000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c3_pins>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c4: i2c@f9926000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9926000 0x1000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c4_pins>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c5: i2c@f9927000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9927000 0x1000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c5_pins>;
#address-cells = <1>;
#size-cells = <0>;
};
blsp1_i2c6: i2c@f9928000 {
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9928000 0x1000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core",
"iface";
pinctrl-0 = <&blsp1_i2c6_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
cci: cci@fda0c000 {
compatible = "qcom,msm8226-cci";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xfda0c000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
<&mmcc CAMSS_CCI_CCI_AHB_CLK>,
<&mmcc CAMSS_CCI_CCI_CLK>;
clock-names = "camss_top_ahb",
"cci_ahb",
"cci";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cci_default>;
pinctrl-1 = <&cci_sleep>;
status = "disabled";
cci_i2c0: i2c-bus@0 {
reg = <0>;
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
usb: usb@f9a55000 {
compatible = "qcom,ci-hdrc";
reg = <0xf9a55000 0x200>,
<0xf9a55200 0x200>;
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
<&gcc GCC_USB_HS_SYSTEM_CLK>;
clock-names = "iface", "core";
assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
assigned-clock-rates = <75000000>;
resets = <&gcc GCC_USB_HS_BCR>;
reset-names = "core";
phy_type = "ulpi";
dr_mode = "otg";
hnp-disable;
srp-disable;
adp-disable;
ahb-burst-config = <0>;
phy-names = "usb-phy";
phys = <&usb_hs_phy>;
status = "disabled";
#reset-cells = <1>;
ulpi {
usb_hs_phy: phy {
compatible = "qcom,usb-hs-phy-msm8226",
"qcom,usb-hs-phy";
#phy-cells = <0>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&gcc GCC_USB2A_PHY_SLEEP_CLK>;
clock-names = "ref", "sleep";
resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
reset-names = "phy", "por";
qcom,init-seq = /bits/ 8 <0x0 0x44
0x1 0x68 0x2 0x24 0x3 0x13>;
};
};
};
gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8226";
reg = <0xfc400000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&sleep_clk>;
clock-names = "xo",
"sleep_clk";
};
mmcc: clock-controller@fd8c0000 {
compatible = "qcom,mmcc-msm8226";
reg = <0xfd8c0000 0x6000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&gcc GCC_MMSS_GPLL0_CLK_SRC>,
<&gcc GPLL0_VOTE>,
<&gcc GPLL1_VOTE>,
<&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
<&mdss_dsi0_phy 1>,
<&mdss_dsi0_phy 0>;
clock-names = "xo",
"mmss_gpll0_vote",
"gpll0_vote",
"gpll1_vote",
"gfx3d_clk_src",
"dsi0pll",
"dsi0pllbyte";
};
tlmm: pinctrl@fd510000 {
compatible = "qcom,msm8226-pinctrl";
reg = <0xfd510000 0x4000>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&tlmm 0 0 117>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
blsp1_i2c1_pins: blsp1-i2c1-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c2_pins: blsp1-i2c2-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c3_pins: blsp1-i2c3-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c4_pins: blsp1-i2c4-state {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c5_pins: blsp1-i2c5-state {
pins = "gpio18", "gpio19";
function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
blsp1_i2c6_pins: blsp1-i2c6-state {
pins = "gpio22", "gpio23";
function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
cci_default: cci-default-state {
pins = "gpio29", "gpio30";
function = "cci_i2c0";
drive-strength = <2>;
bias-disable;
};
cci_sleep: cci-sleep-state {
pins = "gpio29", "gpio30";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sdhc1_default_state: sdhc1-default-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <10>;
bias-disable;
};
cmd-data-pins {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdhc2_default_state: sdhc2-default-state {
clk-pins {
pins = "sdc2_clk";
drive-strength = <10>;
bias-disable;
};
cmd-data-pins {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <10>;
bias-pull-up;
};
};
sdhc3_default_state: sdhc3-default-state {
clk-pins {
pins = "gpio44";
function = "sdc3";
drive-strength = <8>;
bias-disable;
};
cmd-pins {
pins = "gpio43";
function = "sdc3";
drive-strength = <8>;
bias-pull-up;
};
data-pins {
pins = "gpio39", "gpio40", "gpio41", "gpio42";
function = "sdc3";
drive-strength = <8>;
bias-pull-up;
};
};
};
tsens: thermal-sensor@fc4a9000 {
compatible = "qcom,msm8226-tsens", "qcom,tsens-v0_1";
reg = <0xfc4a9000 0x1000>, /* TM */
<0xfc4a8000 0x1000>; /* SROT */
nvmem-cells = <&tsens_mode>,
<&tsens_base1>, <&tsens_base2>,
<&tsens_s0_p1>, <&tsens_s0_p2>,
<&tsens_s1_p1>, <&tsens_s1_p2>,
<&tsens_s2_p1>, <&tsens_s2_p2>,
<&tsens_s3_p1>, <&tsens_s3_p2>,
<&tsens_s4_p1>, <&tsens_s4_p2>,
<&tsens_s5_p1>, <&tsens_s5_p2>,
<&tsens_s6_p1>, <&tsens_s6_p2>;
nvmem-cell-names = "mode",
"base1", "base2",
"s0_p1", "s0_p2",
"s1_p1", "s1_p2",
"s2_p1", "s2_p2",
"s3_p1", "s3_p2",
"s4_p1", "s4_p2",
"s5_p1", "s5_p2",
"s6_p1", "s6_p2";
#qcom,sensors = <6>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
};
qfprom: qfprom@fc4bc000 {
compatible = "qcom,msm8226-qfprom", "qcom,qfprom";
reg = <0xfc4bc000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
tsens_base1: base1@1c1 {
reg = <0x1c1 0x2>;
bits = <5 8>;
};
tsens_s0_p1: s0-p1@1c2 {
reg = <0x1c2 0x2>;
bits = <5 6>;
};
tsens_s1_p1: s1-p1@1c4 {
reg = <0x1c4 0x1>;
bits = <0 6>;
};
tsens_s2_p1: s2-p1@1c4 {
reg = <0x1c4 0x2>;
bits = <6 6>;
};
tsens_s3_p1: s3-p1@1c5 {
reg = <0x1c5 0x2>;
bits = <4 6>;
};
tsens_s4_p1: s4-p1@1c6 {
reg = <0x1c6 0x1>;
bits = <2 6>;
};
tsens_s5_p1: s5-p1@1c7 {
reg = <0x1c7 0x1>;
bits = <0 6>;
};
tsens_s6_p1: s6-p1@1ca {
reg = <0x1ca 0x2>;
bits = <4 6>;
};
tsens_base2: base2@1cc {
reg = <0x1cc 0x1>;
bits = <0 8>;
};
tsens_s0_p2: s0-p2@1cd {
reg = <0x1cd 0x1>;
bits = <0 6>;
};
tsens_s1_p2: s1-p2@1cd {
reg = <0x1cd 0x2>;
bits = <6 6>;
};
tsens_s2_p2: s2-p2@1ce {
reg = <0x1ce 0x2>;
bits = <4 6>;
};
tsens_s3_p2: s3-p2@1cf {
reg = <0x1cf 0x1>;
bits = <2 6>;
};
tsens_s4_p2: s4-p2@446 {
reg = <0x446 0x2>;
bits = <4 6>;
};
tsens_s5_p2: s5-p2@447 {
reg = <0x447 0x1>;
bits = <2 6>;
};
tsens_s6_p2: s6-p2@44e {
reg = <0x44e 0x1>;
bits = <1 6>;
};
tsens_mode: mode@44f {
reg = <0x44f 0x1>;
bits = <5 3>;
};
};
spmi_bus: spmi@fc4cf000 {
compatible = "qcom,spmi-pmic-arb";
reg-names = "core", "intr", "cnfg";
reg = <0xfc4cf000 0x1000>,
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
rng@f9bff000 {
compatible = "qcom,prng";
reg = <0xf9bff000 0x200>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
timer@f9020000 {
compatible = "arm,armv7-timer-mem";
reg = <0xf9020000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
frame@f9021000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
};
sram@fc190000 {
compatible = "qcom,msm8226-rpm-stats";
reg = <0xfc190000 0x10000>;
};
rpm_msg_ram: sram@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xfc428000 0x4000>;
apss_master_stats: sram@150 {
reg = <0x150 0x14>;
};
mpss_master_stats: sram@b50 {
reg = <0xb50 0x14>;
};
lpss_master_stats: sram@1550 {
reg = <0x1550 0x14>;
};
pronto_master_stats: sram@1f50 {
reg = <0x1f50 0x14>;
};
};
tcsr_mutex: hwlock@fd484000 {
compatible = "qcom,msm8226-tcsr-mutex", "qcom,tcsr-mutex";
reg = <0xfd484000 0x1000>;
#hwlock-cells = <1>;
};
adsp: remoteproc@fe200000 {
compatible = "qcom,msm8226-adsp-pil";
reg = <0xfe200000 0x100>;
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
power-domains = <&rpmpd MSM8226_VDDCX>;
power-domain-names = "cx";
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "xo";
memory-region = <&adsp_region>;
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
status = "disabled";
smd-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 8>;
qcom,smd-edge = <1>;
label = "lpass";
};
};
sram@fdd00000 {
compatible = "qcom,msm8226-ocmem";
reg = <0xfdd00000 0x2000>,
<0xfec00000 0x20000>;
reg-names = "ctrl", "mem";
ranges = <0 0xfec00000 0x20000>;
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>;
clock-names = "core";
#address-cells = <1>;
#size-cells = <1>;
gmu_sram: gmu-sram@0 {
reg = <0x0 0x20000>;
};
};
sram@fe805000 {
compatible = "qcom,msm8226-imem", "syscon", "simple-mfd";
reg = <0xfe805000 0x1000>;
reboot-mode {
compatible = "syscon-reboot-mode";
offset = <0x65c>;
mode-bootloader = <0x77665500>;
mode-normal = <0x77665501>;
mode-recovery = <0x77665502>;
};
};
mdss: display-subsystem@fd900000 {
compatible = "qcom,mdss";
reg = <0xfd900000 0x100>, <0xfd924000 0x1000>;
reg-names = "mdss_phys", "vbif_phys";
power-domains = <&mmcc MDSS_GDSC>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
clock-names = "iface",
"bus",
"vsync";
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
status = "disabled";
mdss_mdp: display-controller@fd900000 {
compatible = "qcom,msm8226-mdp5", "qcom,mdp5";
reg = <0xfd900100 0x22000>;
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
interrupts = <0>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
clock-names = "iface",
"bus",
"core",
"vsync";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_mdp_intf1_out: endpoint {
remote-endpoint = <&mdss_dsi0_in>;
};
};
};
};
mdss_dsi0: dsi@fd922800 {
compatible = "qcom,msm8226-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0xfd922800 0x1f8>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <4>;
assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
<&mmcc PCLK0_CLK_SRC>;
assigned-clock-parents = <&mdss_dsi0_phy 0>,
<&mdss_dsi0_phy 1>;
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
<&mmcc MDSS_PCLK0_CLK>,
<&mmcc MDSS_ESC0_CLK>,
<&mmcc MMSS_MISC_AHB_CLK>;
clock-names = "mdp_core",
"iface",
"bus",
"byte",
"pixel",
"core",
"core_mmss";
phys = <&mdss_dsi0_phy>;
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
mdss_dsi0_in: endpoint {
remote-endpoint = <&mdss_mdp_intf1_out>;
};
};
port@1 {
reg = <1>;
mdss_dsi0_out: endpoint {
};
};
};
};
mdss_dsi0_phy: phy@fd922a00 {
compatible = "qcom,dsi-phy-28nm-8226";
reg = <0xfd922a00 0xd4>,
<0xfd922b00 0x280>,
<0xfd922d80 0x30>;
reg-names = "dsi_pll",
"dsi_phy",
"dsi_phy_regulator";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&rpmcc RPM_SMD_XO_CLK_SRC>;
clock-names = "iface",
"ref";
};
};
gpu: adreno@fdb00000 {
compatible = "qcom,adreno-305.18", "qcom,adreno";
reg = <0xfdb00000 0x10000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "kgsl_3d0_irq";
clocks = <&mmcc OXILI_GFX3D_CLK>,
<&mmcc OXILICX_AHB_CLK>,
<&mmcc OXILICX_AXI_CLK>;
clock-names = "core", "iface", "mem_iface";
sram = <&gmu_sram>;
power-domains = <&mmcc OXILICX_GDSC>;
operating-points-v2 = <&gpu_opp_table>;
status = "disabled";
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
};
opp-320000000 {
opp-hz = /bits/ 64 <320000000>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
};
opp-19000000 {
opp-hz = /bits/ 64 <19000000>;
};
};
};
};
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 5>;
trips {
cpu_alert0: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit0: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 2>;
trips {
cpu_alert1: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit1: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 2
(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3
(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4
(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1
(GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
};
};