blob: 057579ae30138d343477e8cc4db5ccca46d3b128 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
*/
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include "sdm632.dtsi"
#include "pm8953.dtsi"
#include "pmi632.dtsi"
/ {
model = "Fairphone 3";
compatible = "fairphone,fp3", "qcom,sdm632";
chassis-type = "handset";
qcom,msm-id = <349 0>;
qcom,board-id = <8 0x10000>;
aliases {
mmc0 = &sdhc_1;
mmc1 = &sdhc_2;
serial0 = &uart_0;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
key-volume-up {
label = "volume_up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-always-on;
regulator-boot-on;
};
};
&hsusb_phy {
status = "okay";
vdd-supply = <&pm8953_l3>;
vdda-pll-supply = <&pm8953_l7>;
vdda-phy-dpdm-supply = <&pm8953_l13>;
};
&i2c_3 {
status = "okay";
touchscreen@48 {
compatible = "himax,hx83112b";
reg = <0x48>;
interrupt-parent = <&tlmm>;
interrupts = <65 IRQ_TYPE_LEVEL_LOW>;
touchscreen-size-x = <1080>;
touchscreen-size-y = <2160>;
reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
};
};
&i2c_5 {
status = "okay";
nfc@28 {
compatible = "nxp,nq310", "nxp,nxp-nci-i2c";
reg = <0x28>;
interrupt-parent = <&tlmm>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
};
};
&lpass {
status = "okay";
};
&pm8953_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&pmi632_lpg {
status = "okay";
multi-led {
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STATUS;
#address-cells = <1>;
#size-cells = <0>;
led@1 {
reg = <1>;
color = <LED_COLOR_ID_RED>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
};
led@3 {
reg = <3>;
color = <LED_COLOR_ID_BLUE>;
};
};
};
&sdhc_1 {
status = "okay";
vmmc-supply = <&pm8953_l8>;
vqmmc-supply = <&pm8953_l5>;
};
&sdhc_2 {
status = "okay";
vmmc-supply = <&pm8953_l11>;
vqmmc-supply = <&pm8953_l12>;
cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
};
&rpm_requests {
regulators {
compatible = "qcom,rpm-pm8953-regulators";
vdd_l1-supply = <&pm8953_s3>;
vdd_l2_l3-supply = <&pm8953_s3>;
vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
pm8953_s3: s3 {
regulator-min-microvolt = <984000>;
regulator-max-microvolt = <1240000>;
};
pm8953_s4: s4 {
regulator-min-microvolt = <1036000>;
regulator-max-microvolt = <2040000>;
};
pm8953_s5: s5 {
regulator-min-microvolt = <1036000>;
regulator-max-microvolt = <2040000>;
};
pm8953_l1: l1 {
regulator-min-microvolt = <975000>;
regulator-max-microvolt = <1050000>;
};
pm8953_l2: l2 {
regulator-min-microvolt = <975000>;
regulator-max-microvolt = <1175000>;
};
pm8953_l3: l3 {
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <925000>;
};
pm8953_l5: l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8953_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8953_l7: l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1900000>;
};
pm8953_l8: l8 {
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
};
pm8953_l9: l9 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
};
pm8953_l10: l10 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
};
pm8953_l11: l11 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
pm8953_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8953_l13: l13 {
regulator-min-microvolt = <3125000>;
regulator-max-microvolt = <3125000>;
};
pm8953_l16: l16 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8953_l17: l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
pm8953_l19: l19 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1350000>;
};
pm8953_l22: l22 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
pm8953_l23: l23 {
regulator-min-microvolt = <975000>;
regulator-max-microvolt = <1225000>;
};
};
};
&tlmm {
/*
* 0-3: unused but protected by TZ
* 135-138: fingerprint reader (SPI)
*/
gpio-reserved-ranges = <0 4>, <135 4>;
};
&uart_0 {
status = "okay";
};
&usb3 {
status = "okay";
};
&usb3_dwc3 {
dr_mode = "peripheral";
};
&wcnss {
status = "okay";
vddpx-supply = <&pm8953_l5>;
};
&wcnss_iris {
compatible = "qcom,wcn3680";
vddxo-supply = <&pm8953_l7>;
vddrfa-supply = <&pm8953_l19>;
vddpa-supply = <&pm8953_l9>;
vdddig-supply = <&pm8953_l5>;
};