blob: 98eb072fa912e4e2196a1a3f203835731ce68415 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
*/
/dts-v1/;
#include "sm6115.dtsi"
#include "pm6125.dtsi"
#include <dt-bindings/arm/qcom,ids.h>
/ {
model = "F(x)tec Pro1X (QX1050)";
compatible = "fxtec,pro1x", "qcom,sm6115";
chassis-type = "handset";
qcom,msm-id = <QCOM_ID_SM6115 0x10000>;
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
framebuffer0: framebuffer@5c000000 {
compatible = "simple-framebuffer";
reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>;
width = <1080>;
height = <2160>;
stride = <(1080 * 4)>;
format = "a8r8g8b8";
clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&vol_up_n>;
pinctrl-names = "default";
key-volume-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
};
};
&dispcc {
/* HACK: disable until a panel driver is ready to retain simplefb */
status = "disabled";
};
&pm6125_gpios {
vol_up_n: vol-up-n-state {
pins = "gpio5";
function = "normal";
power-source = <0>;
bias-pull-up;
input-enable;
};
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&rpm_requests {
regulators-0 {
compatible = "qcom,rpm-pm6125-regulators";
pm6125_s6a: s6 {
regulator-min-microvolt = <304000>;
regulator-max-microvolt = <1456000>;
};
pm6125_s7a: s7 {
regulator-min-microvolt = <1280000>;
regulator-max-microvolt = <2040000>;
};
pm6125_s8a: s8 {
regulator-min-microvolt = <1064000>;
regulator-max-microvolt = <1304000>;
};
pm6125_l1a: l1 {
regulator-min-microvolt = <952000>;
regulator-max-microvolt = <1152000>;
};
pm6125_l4a: l4 {
regulator-min-microvolt = <488000>;
regulator-max-microvolt = <1000000>;
};
pm6125_l5a: l5 {
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <3056000>;
};
pm6125_l6a: l6 {
regulator-min-microvolt = <576000>;
regulator-max-microvolt = <656000>;
};
pm6125_l7a: l7 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1304000>;
};
pm6125_l8a: l8 {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <728000>;
};
pm6125_l9a: l9 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
};
pm6125_l10a: l10 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1904000>;
};
pm6125_l11a: l11 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1952000>;
regulator-allow-set-load;
};
pm6125_l12a: l12 {
regulator-min-microvolt = <1624000>;
regulator-max-microvolt = <1984000>;
};
pm6125_l13a: l13 {
regulator-min-microvolt = <1504000>;
regulator-max-microvolt = <1952000>;
};
pm6125_l14a: l14 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1904000>;
};
pm6125_l15a: l15 {
regulator-min-microvolt = <2920000>;
regulator-max-microvolt = <3232000>;
};
pm6125_l16a: l16 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1904000>;
};
pm6125_l17a: l17 {
regulator-min-microvolt = <1152000>;
regulator-max-microvolt = <1384000>;
};
pm6125_l18a: l18 {
regulator-min-microvolt = <1104000>;
regulator-max-microvolt = <1312000>;
};
pm6125_l19a: l19 {
regulator-min-microvolt = <1624000>;
regulator-max-microvolt = <3304000>;
};
pm6125_l20a: l20 {
regulator-min-microvolt = <1624000>;
regulator-max-microvolt = <3304000>;
};
pm6125_l21a: l21 {
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3600000>;
};
pm6125_l22a: l22 {
regulator-min-microvolt = <2952000>;
regulator-max-microvolt = <3304000>;
};
pm6125_l23a: l23 {
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3400000>;
};
pm6125_l24a: l24 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <3600000>;
regulator-allow-set-load;
};
};
};
&sleep_clk {
clock-frequency = <32764>;
};
&tlmm {
gpio-reserved-ranges = <0 4>, <14 4>;
};
&ufs_mem_hc {
vcc-supply = <&pm6125_l24a>;
vcc-max-microamp = <600000>;
vccq2-supply = <&pm6125_l11a>;
vccq2-max-microamp = <600000>;
vdd-hba-supply = <&pm6125_l18a>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&pm6125_l4a>;
vdda-pll-supply = <&pm6125_l12a>;
status = "okay";
};
&usb {
status = "okay";
};
&usb_dwc3 {
maximum-speed = "high-speed";
dr_mode = "peripheral";
};
&usb_hsphy {
vdd-supply = <&pm6125_l4a>;
vdda-pll-supply = <&pm6125_l12a>;
vdda-phy-dpdm-supply = <&pm6125_l15a>;
status = "okay";
};
&xo_board {
clock-frequency = <19200000>;
};