blob: d401d63e5c4d2aff90a9845efa757ce584aae538 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023 Linaro Limited
*/
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8550.dtsi"
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
#define PMK8550VE_SID 5
#include "pm8550ve.dtsi"
#include "pm8550vs.dtsi"
#include "pmk8550.dtsi"
#include "pmr735d_a.dtsi"
#include "pmr735d_b.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SM8550 QRD";
compatible = "qcom,sm8550-qrd", "qcom,sm8550";
chassis-type = "handset";
aliases {
serial0 = &uart7;
serial1 = &uart14;
};
wcd938x: audio-codec {
compatible = "qcom,wcd9385-codec";
pinctrl-names = "default";
pinctrl-0 = <&wcd_default>;
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
qcom,micbias4-microvolt = <1800000>;
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
qcom,rx-device = <&wcd_rx>;
qcom,tx-device = <&wcd_tx>;
reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
vdd-buck-supply = <&vreg_l15b_1p8>;
vdd-rxtx-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l15b_1p8>;
vdd-mic-bias-supply = <&vreg_bob1>;
#sound-dai-cells = <1>;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&volume_up_n>;
pinctrl-names = "default";
key-volume-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
linux,can-disable;
wakeup-source;
};
};
pmic-glink {
compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_hs_in: endpoint {
remote-endpoint = <&usb_1_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss_in: endpoint {
remote-endpoint = <&redriver_ss_out>;
};
};
port@2 {
reg = <2>;
pmic_glink_sbu: endpoint {
remote-endpoint = <&fsa4480_sbu_mux>;
};
};
};
};
};
sound {
compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
model = "SM8550-QRD";
audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
"SpkrRight IN", "WSA_SPK2 OUT",
"IN1_HPHL", "HPHL_OUT",
"IN2_HPHR", "HPHR_OUT",
"AMIC2", "MIC BIAS2",
"VA DMIC0", "MIC BIAS1",
"VA DMIC1", "MIC BIAS1",
"VA DMIC2", "MIC BIAS3",
"TX DMIC0", "MIC BIAS1",
"TX DMIC1", "MIC BIAS2",
"TX DMIC2", "MIC BIAS3",
"TX SWR_ADC1", "ADC2_OUTPUT";
wcd-playback-dai-link {
link-name = "WCD Playback";
cpu {
sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
};
codec {
sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
wcd-capture-dai-link {
link-name = "WCD Capture";
cpu {
sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
};
codec {
sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
wsa-dai-link {
link-name = "WSA Playback";
cpu {
sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
};
codec {
sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
va-dai-link {
link-name = "VA Capture";
cpu {
sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
};
codec {
sound-dai = <&lpass_vamacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-boot-on;
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8550-rpmh-regulators";
qcom,pmic-id = "b";
vdd-bob1-supply = <&vph_pwr>;
vdd-bob2-supply = <&vph_pwr>;
vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
vdd-l2-l13-l14-supply = <&vreg_bob1>;
vdd-l3-supply = <&vreg_s4g_1p25>;
vdd-l5-l16-supply = <&vreg_bob1>;
vdd-l6-l7-supply = <&vreg_bob1>;
vdd-l8-l9-supply = <&vreg_bob1>;
vdd-l11-supply = <&vreg_s4g_1p25>;
vdd-l12-supply = <&vreg_s6g_1p86>;
vdd-l15-supply = <&vreg_s6g_1p86>;
vdd-l17-supply = <&vreg_bob2>;
vreg_bob1: bob1 {
regulator-name = "vreg_bob1";
regulator-min-microvolt = <3296000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob2: bob2 {
regulator-name = "vreg_bob2";
regulator-min-microvolt = <2720000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1b_1p8: ldo1 {
regulator-name = "vreg_l1b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b_3p0: ldo2 {
regulator-name = "vreg_l2b_3p0";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5b_3p1: ldo5 {
regulator-name = "vreg_l5b_3p1";
regulator-min-microvolt = <3104000>;
regulator-max-microvolt = <3104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b_1p8: ldo6 {
regulator-name = "vreg_l6b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_1p8: ldo7 {
regulator-name = "vreg_l7b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8b_1p8: ldo8 {
regulator-name = "vreg_l8b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b_2p9: ldo9 {
regulator-name = "vreg_l9b_2p9";
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11b_1p2: ldo11 {
regulator-name = "vreg_l11b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12b_1p8: ldo12 {
regulator-name = "vreg_l12b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13b_3p0: ldo13 {
regulator-name = "vreg_l13b_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b_3p2: ldo14 {
regulator-name = "vreg_l14b_3p2";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15b_1p8: ldo15 {
regulator-name = "vreg_l15b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16b_2p8: ldo16 {
regulator-name = "vreg_l16b_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17b_2p5: ldo17 {
regulator-name = "vreg_l17b_2p5";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8550vs-rpmh-regulators";
qcom,pmic-id = "c";
vdd-l1-supply = <&vreg_s4g_1p25>;
vdd-l2-supply = <&vreg_s4e_0p95>;
vdd-l3-supply = <&vreg_s4e_0p95>;
vreg_l3c_0p9: ldo3 {
regulator-name = "vreg_l3c_0p9";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-2 {
compatible = "qcom,pm8550vs-rpmh-regulators";
qcom,pmic-id = "d";
vdd-l1-supply = <&vreg_s4e_0p95>;
vdd-l2-supply = <&vreg_s4e_0p95>;
vdd-l3-supply = <&vreg_s4e_0p95>;
vreg_l1d_0p88: ldo1 {
regulator-name = "vreg_l1d_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
/* ldo2 supplies SM8550 VDD_LPI_MX */
};
regulators-3 {
compatible = "qcom,pm8550vs-rpmh-regulators";
qcom,pmic-id = "e";
vdd-l1-supply = <&vreg_s4e_0p95>;
vdd-l2-supply = <&vreg_s4e_0p95>;
vdd-l3-supply = <&vreg_s4g_1p25>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vreg_s4e_0p95: smps4 {
regulator-name = "vreg_s4e_0p95";
regulator-min-microvolt = <904000>;
regulator-max-microvolt = <984000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s5e_1p08: smps5 {
regulator-name = "vreg_s5e_1p08";
regulator-min-microvolt = <1080000>;
regulator-max-microvolt = <1120000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1e_0p88: ldo1 {
regulator-name = "vreg_l1e_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2e_0p9: ldo2 {
regulator-name = "vreg_l2e_0p9";
regulator-min-microvolt = <904000>;
regulator-max-microvolt = <970000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3e_1p2: ldo3 {
regulator-name = "vreg_l3e_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-4 {
compatible = "qcom,pm8550ve-rpmh-regulators";
qcom,pmic-id = "f";
vdd-l1-supply = <&vreg_s4e_0p95>;
vdd-l2-supply = <&vreg_s4e_0p95>;
vdd-l3-supply = <&vreg_s4e_0p95>;
vdd-s4-supply = <&vph_pwr>;
vreg_s4f_0p5: smps4 {
regulator-name = "vreg_s4f_0p5";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <700000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1f_0p9: ldo1 {
regulator-name = "vreg_l1f_0p9";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2f_0p88: ldo2 {
regulator-name = "vreg_l2f_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3f_0p88: ldo3 {
regulator-name = "vreg_l3f_0p88";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-5 {
compatible = "qcom,pm8550vs-rpmh-regulators";
qcom,pmic-id = "g";
vdd-l1-supply = <&vreg_s4g_1p25>;
vdd-l2-supply = <&vreg_s4g_1p25>;
vdd-l3-supply = <&vreg_s4g_1p25>;
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vreg_s1g_1p25: smps1 {
regulator-name = "vreg_s1g_1p25";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s2g_0p85: smps2 {
regulator-name = "vreg_s2g_0p85";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s3g_0p8: smps3 {
regulator-name = "vreg_s3g_0p8";
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1004000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s4g_1p25: smps4 {
regulator-name = "vreg_s4g_1p25";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1352000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s5g_0p85: smps5 {
regulator-name = "vreg_s5g_0p85";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1004000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s6g_1p86: smps6 {
regulator-name = "vreg_s6g_1p86";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1g_1p2: ldo1 {
regulator-name = "vreg_l1g_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3g_1p2: ldo3 {
regulator-name = "vreg_l3g_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-6 {
compatible = "qcom,pm8010-rpmh-regulators";
qcom,pmic-id = "m";
vdd-l1-l2-supply = <&vreg_s4g_1p25>;
vdd-l3-l4-supply = <&vreg_bob2>;
vdd-l5-supply = <&vreg_s6g_1p86>;
vdd-l6-supply = <&vreg_s6g_1p86>;
vdd-l7-supply = <&vreg_bob1>;
vreg_l1m_1p056: ldo1 {
regulator-name = "vreg_l1m_1p056";
regulator-min-microvolt = <1056000>;
regulator-max-microvolt = <1056000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2m_1p056: ldo2 {
regulator-name = "vreg_l2m_1p056";
regulator-min-microvolt = <1056000>;
regulator-max-microvolt = <1056000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3m_2p8: ldo3 {
regulator-name = "vreg_l3m_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4m_2p8: ldo4 {
regulator-name = "vreg_l4m_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5m_1p8: ldo5 {
regulator-name = "vreg_l5m_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6m_1p8: ldo6 {
regulator-name = "vreg_l6m_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7m_2p9: ldo7 {
regulator-name = "vreg_l7m_2p9";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-7 {
compatible = "qcom,pm8010-rpmh-regulators";
qcom,pmic-id = "n";
vdd-l1-l2-supply = <&vreg_s4g_1p25>;
vdd-l3-l4-supply = <&vreg_bob2>;
vdd-l5-supply = <&vreg_s6g_1p86>;
vdd-l6-supply = <&vreg_bob1>;
vdd-l7-supply = <&vreg_bob1>;
vreg_l1n_1p1: ldo1 {
regulator-name = "vreg_l1n_1p1";
regulator-min-microvolt = <1104000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2n_1p1: ldo2 {
regulator-name = "vreg_l2n_1p1";
regulator-min-microvolt = <1104000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3n_2p8: ldo3 {
regulator-name = "vreg_l3n_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4n_2p8: ldo4 {
regulator-name = "vreg_l4n_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3300000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5n_1p8: ldo5 {
regulator-name = "vreg_l5n_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6n_3p3: ldo6 {
regulator-name = "vreg_l6n_3p3";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7n_2p96: ldo7 {
regulator-name = "vreg_l7n_2p96";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&i2c_master_hub_0 {
status = "okay";
};
&i2c_hub_2 {
status = "okay";
typec-retimer@1c {
compatible = "onnn,nb7vpq904m";
reg = <0x1c>;
vcc-supply = <&vreg_l15b_1p8>;
retimer-switch;
orientation-switch;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
redriver_ss_out: endpoint {
remote-endpoint = <&pmic_glink_ss_in>;
};
};
port@1 {
reg = <1>;
redriver_ss_in: endpoint {
data-lanes = <3 2 1 0>;
remote-endpoint = <&usb_dp_qmpphy_out>;
};
};
};
};
typec-mux@42 {
compatible = "fcs,fsa4480";
reg = <0x42>;
vcc-supply = <&vreg_bob1>;
mode-switch;
orientation-switch;
port {
fsa4480_sbu_mux: endpoint {
remote-endpoint = <&pmic_glink_sbu>;
};
};
};
};
&ipa {
qcom,gsi-loader = "self";
memory-region = <&ipa_fw_mem>;
firmware-name = "qcom/sm8550/ipa_fws.mbn";
status = "okay";
};
&gcc {
clocks = <&bi_tcxo_div2>, <&sleep_clk>,
<&pcie0_phy>,
<&pcie1_phy>,
<0>,
<&ufs_mem_phy 0>,
<&ufs_mem_phy 1>,
<&ufs_mem_phy 2>,
<&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
};
&gpu {
status = "okay";
zap-shader {
firmware-name = "qcom/sm8550/a740_zap.mbn";
};
};
&lpass_tlmm {
spkr_1_sd_n_active: spkr-1-sd-n-active-state {
pins = "gpio17";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-low;
};
spkr_2_sd_n_active: spkr-2-sd-n-active-state {
pins = "gpio18";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-low;
};
};
&mdss {
status = "okay";
};
&mdss_dsi0 {
vdda-supply = <&vreg_l3e_1p2>;
status = "okay";
panel@0 {
compatible = "visionox,vtdr6130";
reg = <0>;
pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
pinctrl-names = "default", "sleep";
vci-supply = <&vreg_l13b_3p0>;
vdd-supply = <&vreg_l11b_1p2>;
vddio-supply = <&vreg_l12b_1p8>;
reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
port {
panel0_in: endpoint {
remote-endpoint = <&mdss_dsi0_out>;
};
};
};
};
&mdss_dsi0_out {
remote-endpoint = <&panel0_in>;
data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
vdds-supply = <&vreg_l1e_0p88>;
status = "okay";
};
&mdss_dp0 {
status = "okay";
};
&mdss_dp0_out {
data-lanes = <0 1>;
remote-endpoint = <&usb_dp_qmpphy_dp_in>;
};
&pcie_1_phy_aux_clk {
status = "disabled";
};
&pcie0 {
wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_default_state>;
pinctrl-names = "default";
status = "okay";
};
&pcie0_phy {
vdda-phy-supply = <&vreg_l1e_0p88>;
vdda-pll-supply = <&vreg_l3e_1p2>;
status = "okay";
};
&pm8550_flash {
status = "okay";
led-0 {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_YELLOW>;
led-sources = <1>, <4>;
led-max-microamp = <500000>;
flash-max-microamp = <2000000>;
flash-max-timeout-us = <1280000>;
function-enumerator = <0>;
};
led-1 {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_WHITE>;
led-sources = <2>, <3>;
led-max-microamp = <500000>;
flash-max-microamp = <2000000>;
flash-max-timeout-us = <1280000>;
function-enumerator = <1>;
};
};
&pm8550_gpios {
volume_up_n: volume-up-n-state {
pins = "gpio6";
function = "normal";
power-source = <1>;
bias-pull-up;
input-enable;
};
};
&pm8550_pwm {
status = "okay";
multi-led {
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STATUS;
#address-cells = <1>;
#size-cells = <0>;
led@1 {
reg = <1>;
color = <LED_COLOR_ID_RED>;
};
led@2 {
reg = <2>;
color = <LED_COLOR_ID_GREEN>;
};
led@3 {
reg = <3>;
color = <LED_COLOR_ID_BLUE>;
};
};
};
&pm8550b_eusb2_repeater {
vdd18-supply = <&vreg_l15b_1p8>;
vdd3-supply = <&vreg_l5b_3p1>;
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&pcie_1_phy_aux_clk {
clock-frequency = <1000>;
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/sm8550/adsp.mbn",
"qcom/sm8550/adsp_dtb.mbn";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/sm8550/cdsp.mbn",
"qcom/sm8550/cdsp_dtb.mbn";
status = "okay";
};
&remoteproc_mpss {
firmware-name = "qcom/sm8550/modem.mbn",
"qcom/sm8550/modem_dtb.mbn";
status = "okay";
};
&sleep_clk {
clock-frequency = <32000>;
};
&swr0 {
status = "okay";
/* WSA8845, Speaker North */
north_spkr: speaker@0,0 {
compatible = "sdw20217020400";
reg = <0 0>;
pinctrl-names = "default";
pinctrl-0 = <&spkr_1_sd_n_active>;
powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "SpkrLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l3g_1p2>;
};
/* WSA8845, Speaker South */
south_spkr: speaker@0,1 {
compatible = "sdw20217020400";
reg = <0 1>;
pinctrl-names = "default";
pinctrl-0 = <&spkr_2_sd_n_active>;
powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "SpkrRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l3g_1p2>;
};
};
&swr1 {
status = "okay";
/* WCD9385 RX */
wcd_rx: codec@0,4 {
compatible = "sdw20217010d00";
reg = <0 4>;
qcom,rx-port-mapping = <1 2 3 4 5>;
};
};
&swr2 {
status = "okay";
/* WCD9385 TX */
wcd_tx: codec@0,3 {
compatible = "sdw20217010d00";
reg = <0 3>;
qcom,tx-port-mapping = <1 1 2 3>;
};
};
&tlmm {
gpio-reserved-ranges = <32 8>;
bt_default: bt-default-state {
bt-en-pins {
pins = "gpio81";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
sw-ctrl-pins {
pins = "gpio82";
function = "gpio";
bias-pull-down;
};
};
sde_dsi_active: sde-dsi-active-state {
pins = "gpio133";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
sde_dsi_suspend: sde-dsi-suspend-state {
pins = "gpio133";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
sde_te_active: sde-te-active-state {
pins = "gpio86";
function = "mdp_vsync";
drive-strength = <2>;
bias-pull-down;
};
sde_te_suspend: sde-te-suspend-state {
pins = "gpio86";
function = "mdp_vsync";
drive-strength = <2>;
bias-pull-down;
};
wcd_default: wcd-reset-n-active-state {
pins = "gpio108";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-low;
};
};
&uart7 {
status = "okay";
};
&uart14 {
status = "okay";
bluetooth {
compatible = "qcom,wcn7850-bt";
vddio-supply = <&vreg_l15b_1p8>;
vddaon-supply = <&vreg_s4e_0p95>;
vdddig-supply = <&vreg_s4e_0p95>;
vddrfa0p8-supply = <&vreg_s4e_0p95>;
vddrfa1p2-supply = <&vreg_s4g_1p25>;
vddrfa1p9-supply = <&vreg_s6g_1p86>;
max-speed = <3200000>;
enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&bt_default>;
pinctrl-names = "default";
};
};
&ufs_mem_hc {
reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l17b_2p5>;
vcc-max-microamp = <1300000>;
vccq-supply = <&vreg_l1g_1p2>;
vccq-max-microamp = <1200000>;
vdd-hba-supply = <&vreg_l3g_1p2>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vreg_l1d_0p88>;
vdda-pll-supply = <&vreg_l3e_1p2>;
status = "okay";
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "otg";
usb-role-switch;
};
&usb_1_dwc3_hs {
remote-endpoint = <&pmic_glink_hs_in>;
};
&usb_1_dwc3_ss {
remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
};
&usb_1_hsphy {
vdd-supply = <&vreg_l1e_0p88>;
vdda12-supply = <&vreg_l3e_1p2>;
phys = <&pm8550b_eusb2_repeater>;
status = "okay";
};
&usb_dp_qmpphy {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l3f_0p88>;
orientation-switch;
status = "okay";
};
&usb_dp_qmpphy_dp_in {
remote-endpoint = <&mdss_dp0_out>;
};
&usb_dp_qmpphy_out {
remote-endpoint = <&redriver_ss_in>;
};
&usb_dp_qmpphy_usb_ss_in {
remote-endpoint = <&usb_1_dwc3_ss>;
};
&xo_board {
clock-frequency = <76800000>;
};