blob: dbdb79f8e959be71d34678370af02df0ca6b28a5 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Unisoc UMS512 SoC DTS file
*
* Copyright (C) 2021, Unisoc Inc.
*/
#include <dt-bindings/clock/sprd,ums512-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
core4 {
cpu = <&CPU4>;
};
core5 {
cpu = <&CPU5>;
};
core6 {
cpu = <&CPU6>;
};
core7 {
cpu = <&CPU7>;
};
};
};
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x0>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU1: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x100>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU2: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x200>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU3: cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x300>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU4: cpu@400 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x400>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU5: cpu@500 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x500>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU6: cpu@600 {
device_type = "cpu";
compatible = "arm,cortex-a75";
reg = <0x0 0x600>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU7: cpu@700 {
device_type = "cpu";
compatible = "arm,cortex-a75";
reg = <0x0 0x700>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
};
idle-states {
entry-method = "psci";
CORE_PD: cpu-pd {
compatible = "arm,idle-state";
entry-latency-us = <4000>;
exit-latency-us = <4000>;
min-residency-us = <10000>;
local-timer-stop;
arm,psci-suspend-param = <0x00010000>;
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
<GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
<GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
<GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
};
soc: soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gic: interrupt-controller@12000000 {
compatible = "arm,gic-v3";
reg = <0x0 0x12000000 0 0x20000>, /* GICD */
<0x0 0x12040000 0 0x100000>; /* GICR */
#interrupt-cells = <3>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
redistributor-stride = <0x0 0x20000>; /* 128KB stride */
#redistributor-regions = <1>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
ap_ahb_regs: syscon@20100000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x20100000 0 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x20100000 0x4000>;
apahb_gate: clock-controller@0 {
compatible = "sprd,ums512-apahb-gate";
reg = <0x0 0x3000>;
clocks = <&ext_26m>;
clock-names = "ext-26m";
#clock-cells = <1>;
};
};
pub_apb_regs: syscon@31050000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x31050000 0 0x9000>;
};
top_dvfs_apb_regs: syscon@322a0000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x322a0000 0 0x8000>;
};
ap_intc0_regs: syscon@32310000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x32310000 0 0x1000>;
};
ap_intc1_regs: syscon@32320000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x32320000 0 0x1000>;
};
ap_intc2_regs: syscon@32330000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x32330000 0 0x1000>;
};
ap_intc3_regs: syscon@32340000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x32340000 0 0x1000>;
};
ap_intc4_regs: syscon@32350000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x32350000 0 0x1000>;
};
ap_intc5_regs: syscon@32360000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x32360000 0 0x1000>;
};
anlg_phy_g0_regs: syscon@32390000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x32390000 0 0x3000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x32390000 0x3000>;
dpll0: clock-controller@0 {
compatible = "sprd,ums512-g0-pll";
reg = <0x0 0x100>;
#clock-cells = <1>;
};
};
anlg_phy_g2_regs: syscon@323b0000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x323b0000 0 0x3000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x323b0000 0x3000>;
mpll1: clock-controller@0 {
compatible = "sprd,ums512-g2-pll";
reg = <0x0 0x100>;
#clock-cells = <1>;
};
};
anlg_phy_g3_regs: syscon@323c0000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x323c0000 0 0x3000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x323c0000 0x3000>;
pll1: clock-controller@0 {
compatible = "sprd,ums512-g3-pll";
reg = <0x0 0x3000>;
clocks = <&ext_26m>;
clock-names = "ext-26m";
#clock-cells = <1>;
};
};
anlg_phy_gc_regs: syscon@323e0000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x323e0000 0 0x3000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x323e0000 0x3000>;
pll2: clock-controller@0 {
compatible = "sprd,ums512-gc-pll";
reg = <0x0 0x100>;
clocks = <&ext_26m>;
clock-names = "ext-26m";
#clock-cells = <1>;
};
};
anlg_phy_g10_regs: syscon@323f0000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x323f0000 0 0x3000>;
};
aon_apb_regs: syscon@327d0000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x327d0000 0 0x3000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x327d0000 0x3000>;
aonapb_gate: clock-controller@0 {
compatible = "sprd,ums512-aon-gate";
reg = <0x0 0x3000>;
clocks = <&ext_26m>;
clock-names = "ext-26m";
#clock-cells = <1>;
};
};
pmu_apb_regs: syscon@327e0000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x327e0000 0 0x3000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x327e0000 0x3000>;
pmu_gate: clock-controller@0 {
compatible = "sprd,ums512-pmu-gate";
reg = <0x0 0x3000>;
clocks = <&ext_26m>;
clock-names = "ext-26m";
#clock-cells = <1>;
};
};
audcp_apb_regs: syscon@3350d000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x3350d000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x3350d000 0x1000>;
audcpapb_gate: clock-controller@0 {
compatible = "sprd,ums512-audcpapb-gate";
reg = <0x0 0x300>;
#clock-cells = <1>;
};
};
audcp_ahb_regs: syscon@335e0000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x335e0000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x335e0000 0x1000>;
audcpahb_gate: clock-controller@0 {
compatible = "sprd,ums512-audcpahb-gate";
reg = <0x0 0x300>;
#clock-cells = <1>;
};
};
gpu_apb_regs: syscon@60100000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x60100000 0 0x3000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x60100000 0x3000>;
gpu_clk: clock-controller@0 {
compatible = "sprd,ums512-gpu-clk";
clocks = <&ext_26m>;
clock-names = "ext-26m";
reg = <0x0 0x100>;
#clock-cells = <1>;
};
};
gpu_dvfs_apb_regs: syscon@60110000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x60110000 0 0x3000>;
};
mm_ahb_regs: syscon@62200000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x62200000 0 0x3000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x62200000 0x3000>;
mm_gate: clock-controller@0 {
compatible = "sprd,ums512-mm-gate-clk";
reg = <0x0 0x3000>;
#clock-cells = <1>;
};
};
ap_apb_regs: syscon@71000000 {
compatible = "sprd,ums512-glbregs", "syscon",
"simple-mfd";
reg = <0 0x71000000 0 0x3000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0x71000000 0x3000>;
apapb_gate: clock-controller@0 {
compatible = "sprd,ums512-apapb-gate";
reg = <0x0 0x3000>;
#clock-cells = <1>;
};
};
ap_clk: clock-controller@20200000 {
compatible = "sprd,ums512-ap-clk";
reg = <0 0x20200000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "ext-26m";
#clock-cells = <1>;
};
aon_clk: clock-controller@32080000 {
compatible = "sprd,ums512-aonapb-clk";
reg = <0 0x32080000 0 0x1000>;
clocks = <&ext_26m>, <&ext_32k>,
<&ext_4m>, <&rco_100m>;
clock-names = "ext-26m", "ext-32k",
"ext-4m", "rco-100m";
#clock-cells = <1>;
};
mm_clk: clock-controller@62100000 {
compatible = "sprd,ums512-mm-clk";
reg = <0 0x62100000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "ext-26m";
#clock-cells = <1>;
};
/* SoC Funnel */
funnel@3c002000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x3c002000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_soc_out_port: endpoint {
remote-endpoint = <&etb_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
funnel_soc_in_port: endpoint {
remote-endpoint =
<&funnel_corinth_out_port>;
};
};
};
};
/* SoC ETF */
soc_etb: etb@3c003000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x3c003000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
in-ports {
port {
etb_in: endpoint {
remote-endpoint =
<&funnel_soc_out_port>;
};
};
};
};
/* AP-CPU Funnel for core3/4/5/7 */
funnel@3e001000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x3e001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_corinth_lit_out_port: endpoint {
remote-endpoint =
<&corinth_etf_lit_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel_core_in_port3: endpoint {
remote-endpoint = <&etm3_out>;
};
};
port@1 {
reg = <1>;
funnel_core_in_port4: endpoint {
remote-endpoint = <&etm4_out>;
};
};
port@2 {
reg = <2>;
funnel_core_in_port5: endpoint {
remote-endpoint = <&etm5_out>;
};
};
port@3 {
reg = <3>;
funnel_core_in_port7: endpoint {
remote-endpoint = <&etm7_out>;
};
};
};
};
/* AP-CPU ETF for little cores */
etf@3e002000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x3e002000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
corinth_etf_lit_out: endpoint {
remote-endpoint =
<&funnel_corinth_from_lit_in_port>;
};
};
};
in-ports {
port {
corinth_etf_lit_in: endpoint {
remote-endpoint =
<&funnel_corinth_lit_out_port>;
};
};
};
};
/* AP-CPU ETF for big cores */
etf@3e003000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x3e003000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
corinth_etf_big_out: endpoint {
remote-endpoint =
<&funnel_corinth_from_big_in_port>;
};
};
};
in-ports {
port {
corinth_etf_big_in: endpoint {
remote-endpoint =
<&funnel_corinth_big_out_port>;
};
};
};
};
/* Funnel to SoC */
funnel@3e004000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x3e004000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_corinth_out_port: endpoint {
remote-endpoint =
<&funnel_soc_in_port>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel_corinth_from_lit_in_port: endpoint {
remote-endpoint = <&corinth_etf_lit_out>;
};
};
port@1 {
reg = <1>;
funnel_corinth_from_big_in_port: endpoint {
remote-endpoint = <&corinth_etf_big_out>;
};
};
};
};
/* AP-CPU Funnel for core0/1/2/6 */
funnel@3e005000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x3e005000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_corinth_big_out_port: endpoint {
remote-endpoint = <&corinth_etf_big_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel_core_in_port0: endpoint {
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel_core_in_port1: endpoint {
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
funnel_core_in_port2: endpoint {
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
funnel_core_in_port6: endpoint {
remote-endpoint = <&etm6_out>;
};
};
};
};
etm0: etm@3f040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f040000 0 0x1000>;
cpu = <&CPU0>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm0_out: endpoint {
remote-endpoint =
<&funnel_core_in_port0>;
};
};
};
};
etm1: etm@3f140000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f140000 0 0x1000>;
cpu = <&CPU1>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm1_out: endpoint {
remote-endpoint =
<&funnel_core_in_port1>;
};
};
};
};
etm2: etm@3f240000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f240000 0 0x1000>;
cpu = <&CPU2>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm2_out: endpoint {
remote-endpoint =
<&funnel_core_in_port2>;
};
};
};
};
etm3: etm@3f340000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f340000 0 0x1000>;
cpu = <&CPU3>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm3_out: endpoint {
remote-endpoint =
<&funnel_core_in_port3>;
};
};
};
};
etm4: etm@3f440000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f440000 0 0x1000>;
cpu = <&CPU4>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm4_out: endpoint {
remote-endpoint =
<&funnel_core_in_port4>;
};
};
};
};
etm5: etm@3f540000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f540000 0 0x1000>;
cpu = <&CPU5>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm5_out: endpoint {
remote-endpoint =
<&funnel_core_in_port5>;
};
};
};
};
etm6: etm@3f640000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f640000 0 0x1000>;
cpu = <&CPU6>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm6_out: endpoint {
remote-endpoint =
<&funnel_core_in_port6>;
};
};
};
};
etm7: etm@3f740000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x3f740000 0 0x1000>;
cpu = <&CPU7>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm7_out: endpoint {
remote-endpoint =
<&funnel_core_in_port7>;
};
};
};
};
apb@70000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x70000000 0x10000000>;
uart0: serial@0 {
compatible = "sprd,ums512-uart",
"sprd,sc9836-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ext_26m>;
status = "disabled";
};
uart1: serial@100000 {
compatible = "sprd,ums512-uart",
"sprd,sc9836-uart";
reg = <0x100000 0x100>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ext_26m>;
status = "disabled";
};
sdio0: mmc@1100000 {
compatible = "sprd,sdhci-r11";
reg = <0x1100000 0x1000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sdio", "enable";
clocks = <&ap_clk CLK_SDIO0_2X>,
<&apapb_gate CLK_SDIO0_EB>;
assigned-clocks = <&ap_clk CLK_SDIO0_2X>;
assigned-clock-parents = <&pll1 CLK_RPLL>;
status = "disabled";
};
sdio3: mmc@1400000 {
compatible = "sprd,sdhci-r11";
reg = <0x1400000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sdio", "enable";
clocks = <&ap_clk CLK_EMMC_2X>,
<&apapb_gate CLK_EMMC_EB>;
assigned-clocks = <&ap_clk CLK_EMMC_2X>;
assigned-clock-parents = <&pll1 CLK_RPLL>;
status = "disabled";
};
};
aon: bus@32000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x32000000 0x1000000>;
adi_bus: spi@100000 {
compatible = "sprd,ums512-adi";
reg = <0x100000 0x100000>;
#address-cells = <1>;
#size-cells = <0>;
sprd,hw-channels = <2 0x18cc>, <3 0x18cc>, <13 0x1854>, <15 0x1874>,
<17 0x1844>,<19 0x1844>, <21 0x1864>, <30 0x1820>,
<35 0x19b8>, <39 0x19ac>;
};
};
};
ext_26m: clk-26m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
clock-output-names = "ext-26m";
};
ext_32k: clk-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "ext-32k";
};
ext_4m: clk-4m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <4000000>;
clock-output-names = "ext-4m";
};
rco_100m: clk-100m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "rco-100m";
};
};