| # |
| # arch/arm/Makefile |
| # |
| # This file is included by the global makefile so that you can add your own |
| # architecture-specific flags and dependencies. |
| # |
| # This file is subject to the terms and conditions of the GNU General Public |
| # License. See the file "COPYING" in the main directory of this archive |
| # for more details. |
| # |
| # Copyright (C) 1995-2001 by Russell King |
| |
| # Ensure linker flags are correct |
| LDFLAGS := |
| |
| LDFLAGS_vmlinux :=-p --no-undefined -X --pic-veneer |
| ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) |
| LDFLAGS_vmlinux += --be8 |
| KBUILD_LDFLAGS_MODULE += --be8 |
| endif |
| |
| ifeq ($(CONFIG_ARM_MODULE_PLTS),y) |
| KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/arm/kernel/module.lds |
| endif |
| |
| GZFLAGS :=-9 |
| #KBUILD_CFLAGS +=-pipe |
| |
| # Never generate .eh_frame |
| KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) |
| |
| # This should work on most of the modern platforms |
| KBUILD_DEFCONFIG := multi_v7_defconfig |
| |
| # defines filename extension depending memory management type. |
| ifeq ($(CONFIG_MMU),) |
| MMUEXT := -nommu |
| KBUILD_CFLAGS += $(call cc-option,-mno-unaligned-access) |
| endif |
| |
| ifeq ($(CONFIG_FRAME_POINTER),y) |
| KBUILD_CFLAGS +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog |
| endif |
| |
| ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) |
| KBUILD_CPPFLAGS += -mbig-endian |
| CHECKFLAGS += -D__ARMEB__ |
| AS += -EB |
| LD += -EB |
| else |
| KBUILD_CPPFLAGS += -mlittle-endian |
| CHECKFLAGS += -D__ARMEL__ |
| AS += -EL |
| LD += -EL |
| endif |
| |
| # |
| # The Scalar Replacement of Aggregates (SRA) optimization pass in GCC 4.9 and |
| # later may result in code being generated that handles signed short and signed |
| # char struct members incorrectly. So disable it. |
| # (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65932) |
| # |
| KBUILD_CFLAGS += $(call cc-option,-fno-ipa-sra) |
| |
| # This selects which instruction set is used. |
| # Note that GCC does not numerically define an architecture version |
| # macro, but instead defines a whole series of macros which makes |
| # testing for a specific architecture or later rather impossible. |
| arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m |
| arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) |
| arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) |
| # Only override the compiler option if ARMv6. The ARMv6K extensions are |
| # always available in ARMv7 |
| ifeq ($(CONFIG_CPU_32v6),y) |
| arch-$(CONFIG_CPU_32v6K) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k) |
| endif |
| arch-$(CONFIG_CPU_32v5) =-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t) |
| arch-$(CONFIG_CPU_32v4T) =-D__LINUX_ARM_ARCH__=4 -march=armv4t |
| arch-$(CONFIG_CPU_32v4) =-D__LINUX_ARM_ARCH__=4 -march=armv4 |
| arch-$(CONFIG_CPU_32v3) =-D__LINUX_ARM_ARCH__=3 -march=armv3 |
| |
| # Evaluate arch cc-option calls now |
| arch-y := $(arch-y) |
| |
| # This selects how we optimise for the processor. |
| tune-$(CONFIG_CPU_ARM7TDMI) =-mtune=arm7tdmi |
| tune-$(CONFIG_CPU_ARM720T) =-mtune=arm7tdmi |
| tune-$(CONFIG_CPU_ARM740T) =-mtune=arm7tdmi |
| tune-$(CONFIG_CPU_ARM9TDMI) =-mtune=arm9tdmi |
| tune-$(CONFIG_CPU_ARM940T) =-mtune=arm9tdmi |
| tune-$(CONFIG_CPU_ARM946E) =$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) |
| tune-$(CONFIG_CPU_ARM920T) =-mtune=arm9tdmi |
| tune-$(CONFIG_CPU_ARM922T) =-mtune=arm9tdmi |
| tune-$(CONFIG_CPU_ARM925T) =-mtune=arm9tdmi |
| tune-$(CONFIG_CPU_ARM926T) =-mtune=arm9tdmi |
| tune-$(CONFIG_CPU_FA526) =-mtune=arm9tdmi |
| tune-$(CONFIG_CPU_SA110) =-mtune=strongarm110 |
| tune-$(CONFIG_CPU_SA1100) =-mtune=strongarm1100 |
| tune-$(CONFIG_CPU_XSCALE) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale |
| tune-$(CONFIG_CPU_XSC3) =$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale |
| tune-$(CONFIG_CPU_FEROCEON) =$(call cc-option,-mtune=marvell-f,-mtune=xscale) |
| tune-$(CONFIG_CPU_V6) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) |
| tune-$(CONFIG_CPU_V6K) =$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) |
| |
| # Evaluate tune cc-option calls now |
| tune-y := $(tune-y) |
| |
| ifeq ($(CONFIG_AEABI),y) |
| CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork -mfpu=vfp |
| else |
| CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) |
| endif |
| |
| ifeq ($(CONFIG_ARM_UNWIND),y) |
| CFLAGS_ABI +=-funwind-tables |
| endif |
| |
| # Accept old syntax despite ".syntax unified" |
| AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) |
| |
| ifeq ($(CONFIG_THUMB2_KERNEL),y) |
| AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it) |
| CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) |
| AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb |
| # Work around buggy relocation from gas if requested: |
| ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) |
| KBUILD_CFLAGS_MODULE +=-fno-optimize-sibling-calls |
| endif |
| else |
| CFLAGS_ISA :=$(call cc-option,-marm,) $(AFLAGS_NOWARN) |
| AFLAGS_ISA :=$(CFLAGS_ISA) |
| endif |
| |
| # Need -Uarm for gcc < 3.x |
| KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm |
| KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float |
| |
| CHECKFLAGS += -D__arm__ -m32 |
| |
| #Default value |
| head-y := arch/arm/kernel/head$(MMUEXT).o |
| |
| # Text offset. This list is sorted numerically by address in order to |
| # provide a means to avoid/resolve conflicts in multi-arch kernels. |
| textofs-y := 0x00008000 |
| # We don't want the htc bootloader to corrupt kernel during resume |
| textofs-$(CONFIG_PM_H1940) := 0x00108000 |
| # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory |
| ifeq ($(CONFIG_ARCH_SA1100),y) |
| textofs-$(CONFIG_SA1111) := 0x00208000 |
| endif |
| textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 |
| textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 |
| textofs-$(CONFIG_ARCH_MESON) := 0x00208000 |
| textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 |
| |
| # Machine directory name. This list is sorted alphanumerically |
| # by CONFIG_* macro name. |
| machine-$(CONFIG_ARCH_ACTIONS) += actions |
| machine-$(CONFIG_ARCH_ALPINE) += alpine |
| machine-$(CONFIG_ARCH_ARTPEC) += artpec |
| machine-$(CONFIG_ARCH_AT91) += at91 |
| machine-$(CONFIG_ARCH_AXXIA) += axxia |
| machine-$(CONFIG_ARCH_BCM) += bcm |
| machine-$(CONFIG_ARCH_BERLIN) += berlin |
| machine-$(CONFIG_ARCH_CLPS711X) += clps711x |
| machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx |
| machine-$(CONFIG_ARCH_DAVINCI) += davinci |
| machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor |
| machine-$(CONFIG_ARCH_DOVE) += dove |
| machine-$(CONFIG_ARCH_EBSA110) += ebsa110 |
| machine-$(CONFIG_ARCH_EFM32) += efm32 |
| machine-$(CONFIG_ARCH_EP93XX) += ep93xx |
| machine-$(CONFIG_ARCH_EXYNOS) += exynos |
| machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge |
| machine-$(CONFIG_ARCH_GEMINI) += gemini |
| machine-$(CONFIG_ARCH_HIGHBANK) += highbank |
| machine-$(CONFIG_ARCH_HISI) += hisi |
| machine-$(CONFIG_ARCH_INTEGRATOR) += integrator |
| machine-$(CONFIG_ARCH_IOP13XX) += iop13xx |
| machine-$(CONFIG_ARCH_IOP32X) += iop32x |
| machine-$(CONFIG_ARCH_IOP33X) += iop33x |
| machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx |
| machine-$(CONFIG_ARCH_KEYSTONE) += keystone |
| machine-$(CONFIG_ARCH_KS8695) += ks8695 |
| machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx |
| machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx |
| machine-$(CONFIG_ARCH_MESON) += meson |
| machine-$(CONFIG_ARCH_MMP) += mmp |
| machine-$(CONFIG_ARCH_MPS2) += vexpress |
| machine-$(CONFIG_ARCH_MOXART) += moxart |
| machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 |
| machine-$(CONFIG_ARCH_MVEBU) += mvebu |
| machine-$(CONFIG_ARCH_MXC) += imx |
| machine-$(CONFIG_ARCH_MEDIATEK) += mediatek |
| machine-$(CONFIG_ARCH_MXS) += mxs |
| machine-$(CONFIG_ARCH_NETX) += netx |
| machine-$(CONFIG_ARCH_NOMADIK) += nomadik |
| machine-$(CONFIG_ARCH_NSPIRE) += nspire |
| machine-$(CONFIG_ARCH_OXNAS) += oxnas |
| machine-$(CONFIG_ARCH_OMAP1) += omap1 |
| machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 |
| machine-$(CONFIG_ARCH_ORION5X) += orion5x |
| machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell |
| machine-$(CONFIG_ARCH_PXA) += pxa |
| machine-$(CONFIG_ARCH_QCOM) += qcom |
| machine-$(CONFIG_ARCH_REALVIEW) += realview |
| machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip |
| machine-$(CONFIG_ARCH_RPC) += rpc |
| machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx |
| machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx |
| machine-$(CONFIG_ARCH_S5PV210) += s5pv210 |
| machine-$(CONFIG_ARCH_SA1100) += sa1100 |
| machine-$(CONFIG_ARCH_SHMOBILE) += shmobile |
| machine-$(CONFIG_ARCH_SIRF) += prima2 |
| machine-$(CONFIG_ARCH_SOCFPGA) += socfpga |
| machine-$(CONFIG_ARCH_STI) += sti |
| machine-$(CONFIG_ARCH_STM32) += stm32 |
| machine-$(CONFIG_ARCH_SUNXI) += sunxi |
| machine-$(CONFIG_ARCH_TANGO) += tango |
| machine-$(CONFIG_ARCH_TEGRA) += tegra |
| machine-$(CONFIG_ARCH_U300) += u300 |
| machine-$(CONFIG_ARCH_U8500) += ux500 |
| machine-$(CONFIG_ARCH_UNIPHIER) += uniphier |
| machine-$(CONFIG_ARCH_VERSATILE) += versatile |
| machine-$(CONFIG_ARCH_VEXPRESS) += vexpress |
| machine-$(CONFIG_ARCH_VT8500) += vt8500 |
| machine-$(CONFIG_ARCH_W90X900) += w90x900 |
| machine-$(CONFIG_ARCH_ZX) += zx |
| machine-$(CONFIG_ARCH_ZYNQ) += zynq |
| machine-$(CONFIG_PLAT_SPEAR) += spear |
| |
| # Platform directory name. This list is sorted alphanumerically |
| # by CONFIG_* macro name. |
| plat-$(CONFIG_ARCH_EXYNOS) += samsung |
| plat-$(CONFIG_ARCH_OMAP) += omap |
| plat-$(CONFIG_ARCH_S3C64XX) += samsung |
| plat-$(CONFIG_ARCH_S5PV210) += samsung |
| plat-$(CONFIG_PLAT_IOP) += iop |
| plat-$(CONFIG_PLAT_ORION) += orion |
| plat-$(CONFIG_PLAT_PXA) += pxa |
| plat-$(CONFIG_PLAT_S3C24XX) += samsung |
| plat-$(CONFIG_PLAT_VERSATILE) += versatile |
| |
| ifeq ($(CONFIG_ARCH_EBSA110),y) |
| # This is what happens if you forget the IOCS16 line. |
| # PCMCIA cards stop working. |
| CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL |
| export CFLAGS_3c589_cs.o |
| endif |
| |
| # The byte offset of the kernel image in RAM from the start of RAM. |
| TEXT_OFFSET := $(textofs-y) |
| |
| # The first directory contains additional information for the boot setup code |
| ifneq ($(machine-y),) |
| MACHINE := arch/arm/mach-$(word 1,$(machine-y))/ |
| else |
| MACHINE := |
| endif |
| ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y) |
| MACHINE := |
| endif |
| |
| machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) |
| platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y))) |
| |
| ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y) |
| ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y) |
| ifeq ($(KBUILD_SRC),) |
| KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs)) |
| else |
| KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs)) |
| endif |
| endif |
| endif |
| |
| export TEXT_OFFSET GZFLAGS MMUEXT |
| |
| # Do we have FASTFPE? |
| FASTFPE :=arch/arm/fastfpe |
| ifeq ($(FASTFPE),$(wildcard $(FASTFPE))) |
| FASTFPE_OBJ :=$(FASTFPE)/ |
| endif |
| |
| core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ |
| core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) |
| core-$(CONFIG_VFP) += arch/arm/vfp/ |
| core-$(CONFIG_XEN) += arch/arm/xen/ |
| core-$(CONFIG_KVM_ARM_HOST) += arch/arm/kvm/ |
| core-$(CONFIG_VDSO) += arch/arm/vdso/ |
| |
| # If we have a machine-specific directory, then include it in the build. |
| core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ |
| core-y += arch/arm/probes/ |
| core-y += arch/arm/net/ |
| core-y += arch/arm/crypto/ |
| core-y += arch/arm/firmware/ |
| core-y += $(machdirs) $(platdirs) |
| |
| drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ |
| |
| libs-y := arch/arm/lib/ $(libs-y) |
| |
| # Default target when executing plain make |
| boot := arch/arm/boot |
| ifeq ($(CONFIG_XIP_KERNEL),y) |
| KBUILD_IMAGE := $(boot)/xipImage |
| else |
| KBUILD_IMAGE := $(boot)/zImage |
| endif |
| |
| # Build the DT binary blobs if we have OF configured |
| ifeq ($(CONFIG_USE_OF),y) |
| KBUILD_DTBS := dtbs |
| endif |
| |
| all: $(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS) |
| |
| |
| archheaders: |
| $(Q)$(MAKE) $(build)=arch/arm/tools uapi |
| |
| archprepare: |
| $(Q)$(MAKE) $(build)=arch/arm/tools kapi |
| |
| # Convert bzImage to zImage |
| bzImage: zImage |
| |
| BOOT_TARGETS = zImage Image xipImage bootpImage uImage |
| INSTALL_TARGETS = zinstall uinstall install |
| |
| PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS) |
| |
| bootpImage uImage: zImage |
| zImage: Image |
| |
| $(BOOT_TARGETS): vmlinux |
| $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ |
| @$(kecho) ' Kernel: $(boot)/$@ is ready' |
| |
| $(INSTALL_TARGETS): |
| $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ |
| |
| %.dtb: | scripts |
| $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@ |
| |
| PHONY += dtbs dtbs_install |
| |
| dtbs: prepare scripts |
| $(Q)$(MAKE) $(build)=$(boot)/dts |
| |
| dtbs_install: |
| $(Q)$(MAKE) $(dtbinst)=$(boot)/dts |
| |
| PHONY += vdso_install |
| vdso_install: |
| ifeq ($(CONFIG_VDSO),y) |
| $(Q)$(MAKE) $(build)=arch/arm/vdso $@ |
| endif |
| |
| # We use MRPROPER_FILES and CLEAN_FILES now |
| archclean: |
| $(Q)$(MAKE) $(clean)=$(boot) |
| |
| # My testing targets (bypasses dependencies) |
| bp:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage |
| |
| |
| define archhelp |
| echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' |
| echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' |
| echo '* xipImage - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)' |
| echo ' uImage - U-Boot wrapped zImage' |
| echo ' bootpImage - Combined zImage and initial RAM disk' |
| echo ' (supply initrd image via make variable INITRD=<path>)' |
| echo '* dtbs - Build device tree blobs for enabled boards' |
| echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)' |
| echo ' install - Install uncompressed kernel' |
| echo ' zinstall - Install compressed kernel' |
| echo ' uinstall - Install U-Boot wrapped compressed kernel' |
| echo ' Install using (your) ~/bin/$(INSTALLKERNEL) or' |
| echo ' (distribution) /sbin/$(INSTALLKERNEL) or' |
| echo ' install to $$(INSTALL_PATH) and run lilo' |
| echo ' vdso_install - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso' |
| endef |
