| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2015-2017 Broadcom |
| */ |
| |
| #include "bcm-phy-lib.h" |
| #include <linux/brcmphy.h> |
| #include <linux/export.h> |
| #include <linux/mdio.h> |
| #include <linux/module.h> |
| #include <linux/phy.h> |
| #include <linux/ethtool.h> |
| |
| #define MII_BCM_CHANNEL_WIDTH 0x2000 |
| #define BCM_CL45VEN_EEE_ADV 0x3c |
| |
| int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val) |
| { |
| int rc; |
| |
| rc = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); |
| if (rc < 0) |
| return rc; |
| |
| return phy_write(phydev, MII_BCM54XX_EXP_DATA, val); |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_write_exp); |
| |
| int bcm_phy_read_exp(struct phy_device *phydev, u16 reg) |
| { |
| int val; |
| |
| val = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); |
| if (val < 0) |
| return val; |
| |
| val = phy_read(phydev, MII_BCM54XX_EXP_DATA); |
| |
| /* Restore default value. It's O.K. if this write fails. */ |
| phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); |
| |
| return val; |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_read_exp); |
| |
| int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum) |
| { |
| /* The register must be written to both the Shadow Register Select and |
| * the Shadow Read Register Selector |
| */ |
| phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MASK | |
| regnum << MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT); |
| return phy_read(phydev, MII_BCM54XX_AUX_CTL); |
| } |
| EXPORT_SYMBOL_GPL(bcm54xx_auxctl_read); |
| |
| int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val) |
| { |
| return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val); |
| } |
| EXPORT_SYMBOL(bcm54xx_auxctl_write); |
| |
| int bcm_phy_write_misc(struct phy_device *phydev, |
| u16 reg, u16 chl, u16 val) |
| { |
| int rc; |
| int tmp; |
| |
| rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, |
| MII_BCM54XX_AUXCTL_SHDWSEL_MISC); |
| if (rc < 0) |
| return rc; |
| |
| tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL); |
| tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA; |
| rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp); |
| if (rc < 0) |
| return rc; |
| |
| tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg; |
| rc = bcm_phy_write_exp(phydev, tmp, val); |
| |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_write_misc); |
| |
| int bcm_phy_read_misc(struct phy_device *phydev, |
| u16 reg, u16 chl) |
| { |
| int rc; |
| int tmp; |
| |
| rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, |
| MII_BCM54XX_AUXCTL_SHDWSEL_MISC); |
| if (rc < 0) |
| return rc; |
| |
| tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL); |
| tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA; |
| rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp); |
| if (rc < 0) |
| return rc; |
| |
| tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg; |
| rc = bcm_phy_read_exp(phydev, tmp); |
| |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_read_misc); |
| |
| int bcm_phy_ack_intr(struct phy_device *phydev) |
| { |
| int reg; |
| |
| /* Clear pending interrupts. */ |
| reg = phy_read(phydev, MII_BCM54XX_ISR); |
| if (reg < 0) |
| return reg; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_ack_intr); |
| |
| int bcm_phy_config_intr(struct phy_device *phydev) |
| { |
| int reg; |
| |
| reg = phy_read(phydev, MII_BCM54XX_ECR); |
| if (reg < 0) |
| return reg; |
| |
| if (phydev->interrupts == PHY_INTERRUPT_ENABLED) |
| reg &= ~MII_BCM54XX_ECR_IM; |
| else |
| reg |= MII_BCM54XX_ECR_IM; |
| |
| return phy_write(phydev, MII_BCM54XX_ECR, reg); |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_config_intr); |
| |
| int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow) |
| { |
| phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow)); |
| return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD)); |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_read_shadow); |
| |
| int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow, |
| u16 val) |
| { |
| return phy_write(phydev, MII_BCM54XX_SHD, |
| MII_BCM54XX_SHD_WRITE | |
| MII_BCM54XX_SHD_VAL(shadow) | |
| MII_BCM54XX_SHD_DATA(val)); |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_write_shadow); |
| |
| int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down) |
| { |
| int val; |
| |
| if (dll_pwr_down) { |
| val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3); |
| if (val < 0) |
| return val; |
| |
| val |= BCM54XX_SHD_SCR3_DLLAPD_DIS; |
| bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val); |
| } |
| |
| val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD); |
| if (val < 0) |
| return val; |
| |
| /* Clear APD bits */ |
| val &= BCM_APD_CLR_MASK; |
| |
| if (phydev->autoneg == AUTONEG_ENABLE) |
| val |= BCM54XX_SHD_APD_EN; |
| else |
| val |= BCM_NO_ANEG_APD_EN; |
| |
| /* Enable energy detect single link pulse for easy wakeup */ |
| val |= BCM_APD_SINGLELP_EN; |
| |
| /* Enable Auto Power-Down (APD) for the PHY */ |
| return bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val); |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_enable_apd); |
| |
| int bcm_phy_set_eee(struct phy_device *phydev, bool enable) |
| { |
| int val; |
| |
| /* Enable EEE at PHY level */ |
| val = phy_read_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL); |
| if (val < 0) |
| return val; |
| |
| if (enable) |
| val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X; |
| else |
| val &= ~(LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X); |
| |
| phy_write_mmd(phydev, MDIO_MMD_AN, BRCM_CL45VEN_EEE_CONTROL, (u32)val); |
| |
| /* Advertise EEE */ |
| val = phy_read_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV); |
| if (val < 0) |
| return val; |
| |
| if (enable) |
| val |= (MDIO_EEE_100TX | MDIO_EEE_1000T); |
| else |
| val &= ~(MDIO_EEE_100TX | MDIO_EEE_1000T); |
| |
| phy_write_mmd(phydev, MDIO_MMD_AN, BCM_CL45VEN_EEE_ADV, (u32)val); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_set_eee); |
| |
| int bcm_phy_downshift_get(struct phy_device *phydev, u8 *count) |
| { |
| int val; |
| |
| val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC); |
| if (val < 0) |
| return val; |
| |
| /* Check if wirespeed is enabled or not */ |
| if (!(val & MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN)) { |
| *count = DOWNSHIFT_DEV_DISABLE; |
| return 0; |
| } |
| |
| val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR2); |
| if (val < 0) |
| return val; |
| |
| /* Downgrade after one link attempt */ |
| if (val & BCM54XX_SHD_SCR2_WSPD_RTRY_DIS) { |
| *count = 1; |
| } else { |
| /* Downgrade after configured retry count */ |
| val >>= BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT; |
| val &= BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK; |
| *count = val + BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_downshift_get); |
| |
| int bcm_phy_downshift_set(struct phy_device *phydev, u8 count) |
| { |
| int val = 0, ret = 0; |
| |
| /* Range check the number given */ |
| if (count - BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET > |
| BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK && |
| count != DOWNSHIFT_DEV_DEFAULT_COUNT) { |
| return -ERANGE; |
| } |
| |
| val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC); |
| if (val < 0) |
| return val; |
| |
| /* Se the write enable bit */ |
| val |= MII_BCM54XX_AUXCTL_MISC_WREN; |
| |
| if (count == DOWNSHIFT_DEV_DISABLE) { |
| val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN; |
| return bcm54xx_auxctl_write(phydev, |
| MII_BCM54XX_AUXCTL_SHDWSEL_MISC, |
| val); |
| } else { |
| val |= MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN; |
| ret = bcm54xx_auxctl_write(phydev, |
| MII_BCM54XX_AUXCTL_SHDWSEL_MISC, |
| val); |
| if (ret < 0) |
| return ret; |
| } |
| |
| val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR2); |
| val &= ~(BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK << |
| BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT | |
| BCM54XX_SHD_SCR2_WSPD_RTRY_DIS); |
| |
| switch (count) { |
| case 1: |
| val |= BCM54XX_SHD_SCR2_WSPD_RTRY_DIS; |
| break; |
| case DOWNSHIFT_DEV_DEFAULT_COUNT: |
| val |= 1 << BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT; |
| break; |
| default: |
| val |= (count - BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET) << |
| BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT; |
| break; |
| } |
| |
| return bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR2, val); |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_downshift_set); |
| |
| struct bcm_phy_hw_stat { |
| const char *string; |
| u8 reg; |
| u8 shift; |
| u8 bits; |
| }; |
| |
| /* Counters freeze at either 0xffff or 0xff, better than nothing */ |
| static const struct bcm_phy_hw_stat bcm_phy_hw_stats[] = { |
| { "phy_receive_errors", MII_BRCM_CORE_BASE12, 0, 16 }, |
| { "phy_serdes_ber_errors", MII_BRCM_CORE_BASE13, 8, 8 }, |
| { "phy_false_carrier_sense_errors", MII_BRCM_CORE_BASE13, 0, 8 }, |
| { "phy_local_rcvr_nok", MII_BRCM_CORE_BASE14, 8, 8 }, |
| { "phy_remote_rcv_nok", MII_BRCM_CORE_BASE14, 0, 8 }, |
| }; |
| |
| int bcm_phy_get_sset_count(struct phy_device *phydev) |
| { |
| return ARRAY_SIZE(bcm_phy_hw_stats); |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_get_sset_count); |
| |
| void bcm_phy_get_strings(struct phy_device *phydev, u8 *data) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(bcm_phy_hw_stats); i++) |
| strlcpy(data + i * ETH_GSTRING_LEN, |
| bcm_phy_hw_stats[i].string, ETH_GSTRING_LEN); |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_get_strings); |
| |
| /* Caller is supposed to provide appropriate storage for the library code to |
| * access the shadow copy |
| */ |
| static u64 bcm_phy_get_stat(struct phy_device *phydev, u64 *shadow, |
| unsigned int i) |
| { |
| struct bcm_phy_hw_stat stat = bcm_phy_hw_stats[i]; |
| int val; |
| u64 ret; |
| |
| val = phy_read(phydev, stat.reg); |
| if (val < 0) { |
| ret = U64_MAX; |
| } else { |
| val >>= stat.shift; |
| val = val & ((1 << stat.bits) - 1); |
| shadow[i] += val; |
| ret = shadow[i]; |
| } |
| |
| return ret; |
| } |
| |
| void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow, |
| struct ethtool_stats *stats, u64 *data) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(bcm_phy_hw_stats); i++) |
| data[i] = bcm_phy_get_stat(phydev, shadow, i); |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_get_stats); |
| |
| void bcm_phy_r_rc_cal_reset(struct phy_device *phydev) |
| { |
| /* Reset R_CAL/RC_CAL Engine */ |
| bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010); |
| |
| /* Disable Reset R_AL/RC_CAL Engine */ |
| bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000); |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_r_rc_cal_reset); |
| |
| int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev) |
| { |
| /* Increase VCO range to prevent unlocking problem of PLL at low |
| * temp |
| */ |
| bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048); |
| |
| /* Change Ki to 011 */ |
| bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b); |
| |
| /* Disable loading of TVCO buffer to bandgap, set bandgap trim |
| * to 111 |
| */ |
| bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20); |
| |
| /* Adjust bias current trim by -3 */ |
| bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b); |
| |
| /* Switch to CORE_BASE1E */ |
| phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd); |
| |
| bcm_phy_r_rc_cal_reset(phydev); |
| |
| /* write AFE_RXCONFIG_0 */ |
| bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19); |
| |
| /* write AFE_RXCONFIG_1 */ |
| bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f); |
| |
| /* write AFE_RX_LP_COUNTER */ |
| bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); |
| |
| /* write AFE_HPF_TRIM_OTHERS */ |
| bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b); |
| |
| /* write AFTE_TX_CONFIG */ |
| bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(bcm_phy_28nm_a0b0_afe_config_init); |
| |
| MODULE_DESCRIPTION("Broadcom PHY Library"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Broadcom Corporation"); |