| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Remote Processor Framework |
| * |
| * Copyright (C) 2011 Texas Instruments, Inc. |
| * Copyright (C) 2011 Google, Inc. |
| * |
| * Ohad Ben-Cohen <ohad@wizery.com> |
| * Brian Swetland <swetland@google.com> |
| * Mark Grosen <mgrosen@ti.com> |
| * Fernando Guzman Lugo <fernando.lugo@ti.com> |
| * Suman Anna <s-anna@ti.com> |
| * Robert Tivy <rtivy@ti.com> |
| * Armando Uribe De Leon <x0095078@ti.com> |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/slab.h> |
| #include <linux/mutex.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/firmware.h> |
| #include <linux/string.h> |
| #include <linux/debugfs.h> |
| #include <linux/devcoredump.h> |
| #include <linux/remoteproc.h> |
| #include <linux/iommu.h> |
| #include <linux/idr.h> |
| #include <linux/elf.h> |
| #include <linux/crc32.h> |
| #include <linux/of_reserved_mem.h> |
| #include <linux/virtio_ids.h> |
| #include <linux/virtio_ring.h> |
| #include <asm/byteorder.h> |
| #include <linux/platform_device.h> |
| |
| #include "remoteproc_internal.h" |
| |
| #define HIGH_BITS_MASK 0xFFFFFFFF00000000ULL |
| |
| static DEFINE_MUTEX(rproc_list_mutex); |
| static LIST_HEAD(rproc_list); |
| |
| typedef int (*rproc_handle_resource_t)(struct rproc *rproc, |
| void *, int offset, int avail); |
| |
| static int rproc_alloc_carveout(struct rproc *rproc, |
| struct rproc_mem_entry *mem); |
| static int rproc_release_carveout(struct rproc *rproc, |
| struct rproc_mem_entry *mem); |
| |
| /* Unique indices for remoteproc devices */ |
| static DEFINE_IDA(rproc_dev_index); |
| |
| static const char * const rproc_crash_names[] = { |
| [RPROC_MMUFAULT] = "mmufault", |
| [RPROC_WATCHDOG] = "watchdog", |
| [RPROC_FATAL_ERROR] = "fatal error", |
| }; |
| |
| /* translate rproc_crash_type to string */ |
| static const char *rproc_crash_to_string(enum rproc_crash_type type) |
| { |
| if (type < ARRAY_SIZE(rproc_crash_names)) |
| return rproc_crash_names[type]; |
| return "unknown"; |
| } |
| |
| /* |
| * This is the IOMMU fault handler we register with the IOMMU API |
| * (when relevant; not all remote processors access memory through |
| * an IOMMU). |
| * |
| * IOMMU core will invoke this handler whenever the remote processor |
| * will try to access an unmapped device address. |
| */ |
| static int rproc_iommu_fault(struct iommu_domain *domain, struct device *dev, |
| unsigned long iova, int flags, void *token) |
| { |
| struct rproc *rproc = token; |
| |
| dev_err(dev, "iommu fault: da 0x%lx flags 0x%x\n", iova, flags); |
| |
| rproc_report_crash(rproc, RPROC_MMUFAULT); |
| |
| /* |
| * Let the iommu core know we're not really handling this fault; |
| * we just used it as a recovery trigger. |
| */ |
| return -ENOSYS; |
| } |
| |
| static int rproc_enable_iommu(struct rproc *rproc) |
| { |
| struct iommu_domain *domain; |
| struct device *dev = rproc->dev.parent; |
| int ret; |
| |
| if (!rproc->has_iommu) { |
| dev_dbg(dev, "iommu not present\n"); |
| return 0; |
| } |
| |
| domain = iommu_domain_alloc(dev->bus); |
| if (!domain) { |
| dev_err(dev, "can't alloc iommu domain\n"); |
| return -ENOMEM; |
| } |
| |
| iommu_set_fault_handler(domain, rproc_iommu_fault, rproc); |
| |
| ret = iommu_attach_device(domain, dev); |
| if (ret) { |
| dev_err(dev, "can't attach iommu device: %d\n", ret); |
| goto free_domain; |
| } |
| |
| rproc->domain = domain; |
| |
| return 0; |
| |
| free_domain: |
| iommu_domain_free(domain); |
| return ret; |
| } |
| |
| static void rproc_disable_iommu(struct rproc *rproc) |
| { |
| struct iommu_domain *domain = rproc->domain; |
| struct device *dev = rproc->dev.parent; |
| |
| if (!domain) |
| return; |
| |
| iommu_detach_device(domain, dev); |
| iommu_domain_free(domain); |
| } |
| |
| phys_addr_t rproc_va_to_pa(void *cpu_addr) |
| { |
| /* |
| * Return physical address according to virtual address location |
| * - in vmalloc: if region ioremapped or defined as dma_alloc_coherent |
| * - in kernel: if region allocated in generic dma memory pool |
| */ |
| if (is_vmalloc_addr(cpu_addr)) { |
| return page_to_phys(vmalloc_to_page(cpu_addr)) + |
| offset_in_page(cpu_addr); |
| } |
| |
| WARN_ON(!virt_addr_valid(cpu_addr)); |
| return virt_to_phys(cpu_addr); |
| } |
| EXPORT_SYMBOL(rproc_va_to_pa); |
| |
| /** |
| * rproc_da_to_va() - lookup the kernel virtual address for a remoteproc address |
| * @rproc: handle of a remote processor |
| * @da: remoteproc device address to translate |
| * @len: length of the memory region @da is pointing to |
| * |
| * Some remote processors will ask us to allocate them physically contiguous |
| * memory regions (which we call "carveouts"), and map them to specific |
| * device addresses (which are hardcoded in the firmware). They may also have |
| * dedicated memory regions internal to the processors, and use them either |
| * exclusively or alongside carveouts. |
| * |
| * They may then ask us to copy objects into specific device addresses (e.g. |
| * code/data sections) or expose us certain symbols in other device address |
| * (e.g. their trace buffer). |
| * |
| * This function is a helper function with which we can go over the allocated |
| * carveouts and translate specific device addresses to kernel virtual addresses |
| * so we can access the referenced memory. This function also allows to perform |
| * translations on the internal remoteproc memory regions through a platform |
| * implementation specific da_to_va ops, if present. |
| * |
| * The function returns a valid kernel address on success or NULL on failure. |
| * |
| * Note: phys_to_virt(iommu_iova_to_phys(rproc->domain, da)) will work too, |
| * but only on kernel direct mapped RAM memory. Instead, we're just using |
| * here the output of the DMA API for the carveouts, which should be more |
| * correct. |
| */ |
| void *rproc_da_to_va(struct rproc *rproc, u64 da, int len) |
| { |
| struct rproc_mem_entry *carveout; |
| void *ptr = NULL; |
| |
| if (rproc->ops->da_to_va) { |
| ptr = rproc->ops->da_to_va(rproc, da, len); |
| if (ptr) |
| goto out; |
| } |
| |
| list_for_each_entry(carveout, &rproc->carveouts, node) { |
| int offset = da - carveout->da; |
| |
| /* Verify that carveout is allocated */ |
| if (!carveout->va) |
| continue; |
| |
| /* try next carveout if da is too small */ |
| if (offset < 0) |
| continue; |
| |
| /* try next carveout if da is too large */ |
| if (offset + len > carveout->len) |
| continue; |
| |
| ptr = carveout->va + offset; |
| |
| break; |
| } |
| |
| out: |
| return ptr; |
| } |
| EXPORT_SYMBOL(rproc_da_to_va); |
| |
| /** |
| * rproc_find_carveout_by_name() - lookup the carveout region by a name |
| * @rproc: handle of a remote processor |
| * @name,..: carveout name to find (standard printf format) |
| * |
| * Platform driver has the capability to register some pre-allacoted carveout |
| * (physically contiguous memory regions) before rproc firmware loading and |
| * associated resource table analysis. These regions may be dedicated memory |
| * regions internal to the coprocessor or specified DDR region with specific |
| * attributes |
| * |
| * This function is a helper function with which we can go over the |
| * allocated carveouts and return associated region characteristics like |
| * coprocessor address, length or processor virtual address. |
| * |
| * Return: a valid pointer on carveout entry on success or NULL on failure. |
| */ |
| struct rproc_mem_entry * |
| rproc_find_carveout_by_name(struct rproc *rproc, const char *name, ...) |
| { |
| va_list args; |
| char _name[32]; |
| struct rproc_mem_entry *carveout, *mem = NULL; |
| |
| if (!name) |
| return NULL; |
| |
| va_start(args, name); |
| vsnprintf(_name, sizeof(_name), name, args); |
| va_end(args); |
| |
| list_for_each_entry(carveout, &rproc->carveouts, node) { |
| /* Compare carveout and requested names */ |
| if (!strcmp(carveout->name, _name)) { |
| mem = carveout; |
| break; |
| } |
| } |
| |
| return mem; |
| } |
| |
| /** |
| * rproc_check_carveout_da() - Check specified carveout da configuration |
| * @rproc: handle of a remote processor |
| * @mem: pointer on carveout to check |
| * @da: area device address |
| * @len: associated area size |
| * |
| * This function is a helper function to verify requested device area (couple |
| * da, len) is part of specified carveout. |
| * If da is not set (defined as FW_RSC_ADDR_ANY), only requested length is |
| * checked. |
| * |
| * Return: 0 if carveout matches request else error |
| */ |
| static int rproc_check_carveout_da(struct rproc *rproc, |
| struct rproc_mem_entry *mem, u32 da, u32 len) |
| { |
| struct device *dev = &rproc->dev; |
| int delta; |
| |
| /* Check requested resource length */ |
| if (len > mem->len) { |
| dev_err(dev, "Registered carveout doesn't fit len request\n"); |
| return -EINVAL; |
| } |
| |
| if (da != FW_RSC_ADDR_ANY && mem->da == FW_RSC_ADDR_ANY) { |
| /* Address doesn't match registered carveout configuration */ |
| return -EINVAL; |
| } else if (da != FW_RSC_ADDR_ANY && mem->da != FW_RSC_ADDR_ANY) { |
| delta = da - mem->da; |
| |
| /* Check requested resource belongs to registered carveout */ |
| if (delta < 0) { |
| dev_err(dev, |
| "Registered carveout doesn't fit da request\n"); |
| return -EINVAL; |
| } |
| |
| if (delta + len > mem->len) { |
| dev_err(dev, |
| "Registered carveout doesn't fit len request\n"); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int rproc_alloc_vring(struct rproc_vdev *rvdev, int i) |
| { |
| struct rproc *rproc = rvdev->rproc; |
| struct device *dev = &rproc->dev; |
| struct rproc_vring *rvring = &rvdev->vring[i]; |
| struct fw_rsc_vdev *rsc; |
| int ret, size, notifyid; |
| struct rproc_mem_entry *mem; |
| |
| /* actual size of vring (in bytes) */ |
| size = PAGE_ALIGN(vring_size(rvring->len, rvring->align)); |
| |
| rsc = (void *)rproc->table_ptr + rvdev->rsc_offset; |
| |
| /* Search for pre-registered carveout */ |
| mem = rproc_find_carveout_by_name(rproc, "vdev%dvring%d", rvdev->index, |
| i); |
| if (mem) { |
| if (rproc_check_carveout_da(rproc, mem, rsc->vring[i].da, size)) |
| return -ENOMEM; |
| } else { |
| /* Register carveout in in list */ |
| mem = rproc_mem_entry_init(dev, NULL, 0, |
| size, rsc->vring[i].da, |
| rproc_alloc_carveout, |
| rproc_release_carveout, |
| "vdev%dvring%d", |
| rvdev->index, i); |
| if (!mem) { |
| dev_err(dev, "Can't allocate memory entry structure\n"); |
| return -ENOMEM; |
| } |
| |
| rproc_add_carveout(rproc, mem); |
| } |
| |
| /* |
| * Assign an rproc-wide unique index for this vring |
| * TODO: assign a notifyid for rvdev updates as well |
| * TODO: support predefined notifyids (via resource table) |
| */ |
| ret = idr_alloc(&rproc->notifyids, rvring, 0, 0, GFP_KERNEL); |
| if (ret < 0) { |
| dev_err(dev, "idr_alloc failed: %d\n", ret); |
| return ret; |
| } |
| notifyid = ret; |
| |
| /* Potentially bump max_notifyid */ |
| if (notifyid > rproc->max_notifyid) |
| rproc->max_notifyid = notifyid; |
| |
| rvring->notifyid = notifyid; |
| |
| /* Let the rproc know the notifyid of this vring.*/ |
| rsc->vring[i].notifyid = notifyid; |
| return 0; |
| } |
| |
| static int |
| rproc_parse_vring(struct rproc_vdev *rvdev, struct fw_rsc_vdev *rsc, int i) |
| { |
| struct rproc *rproc = rvdev->rproc; |
| struct device *dev = &rproc->dev; |
| struct fw_rsc_vdev_vring *vring = &rsc->vring[i]; |
| struct rproc_vring *rvring = &rvdev->vring[i]; |
| |
| dev_dbg(dev, "vdev rsc: vring%d: da 0x%x, qsz %d, align %d\n", |
| i, vring->da, vring->num, vring->align); |
| |
| /* verify queue size and vring alignment are sane */ |
| if (!vring->num || !vring->align) { |
| dev_err(dev, "invalid qsz (%d) or alignment (%d)\n", |
| vring->num, vring->align); |
| return -EINVAL; |
| } |
| |
| rvring->len = vring->num; |
| rvring->align = vring->align; |
| rvring->rvdev = rvdev; |
| |
| return 0; |
| } |
| |
| void rproc_free_vring(struct rproc_vring *rvring) |
| { |
| struct rproc *rproc = rvring->rvdev->rproc; |
| int idx = rvring - rvring->rvdev->vring; |
| struct fw_rsc_vdev *rsc; |
| |
| idr_remove(&rproc->notifyids, rvring->notifyid); |
| |
| /* reset resource entry info */ |
| rsc = (void *)rproc->table_ptr + rvring->rvdev->rsc_offset; |
| rsc->vring[idx].da = 0; |
| rsc->vring[idx].notifyid = -1; |
| } |
| |
| static int rproc_vdev_do_start(struct rproc_subdev *subdev) |
| { |
| struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev); |
| |
| return rproc_add_virtio_dev(rvdev, rvdev->id); |
| } |
| |
| static void rproc_vdev_do_stop(struct rproc_subdev *subdev, bool crashed) |
| { |
| struct rproc_vdev *rvdev = container_of(subdev, struct rproc_vdev, subdev); |
| int ret; |
| |
| ret = device_for_each_child(&rvdev->dev, NULL, rproc_remove_virtio_dev); |
| if (ret) |
| dev_warn(&rvdev->dev, "can't remove vdev child device: %d\n", ret); |
| } |
| |
| /** |
| * rproc_rvdev_release() - release the existence of a rvdev |
| * |
| * @dev: the subdevice's dev |
| */ |
| static void rproc_rvdev_release(struct device *dev) |
| { |
| struct rproc_vdev *rvdev = container_of(dev, struct rproc_vdev, dev); |
| |
| of_reserved_mem_device_release(dev); |
| |
| kfree(rvdev); |
| } |
| |
| /** |
| * rproc_handle_vdev() - handle a vdev fw resource |
| * @rproc: the remote processor |
| * @rsc: the vring resource descriptor |
| * @avail: size of available data (for sanity checking the image) |
| * |
| * This resource entry requests the host to statically register a virtio |
| * device (vdev), and setup everything needed to support it. It contains |
| * everything needed to make it possible: the virtio device id, virtio |
| * device features, vrings information, virtio config space, etc... |
| * |
| * Before registering the vdev, the vrings are allocated from non-cacheable |
| * physically contiguous memory. Currently we only support two vrings per |
| * remote processor (temporary limitation). We might also want to consider |
| * doing the vring allocation only later when ->find_vqs() is invoked, and |
| * then release them upon ->del_vqs(). |
| * |
| * Note: @da is currently not really handled correctly: we dynamically |
| * allocate it using the DMA API, ignoring requested hard coded addresses, |
| * and we don't take care of any required IOMMU programming. This is all |
| * going to be taken care of when the generic iommu-based DMA API will be |
| * merged. Meanwhile, statically-addressed iommu-based firmware images should |
| * use RSC_DEVMEM resource entries to map their required @da to the physical |
| * address of their base CMA region (ouch, hacky!). |
| * |
| * Returns 0 on success, or an appropriate error code otherwise |
| */ |
| static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc, |
| int offset, int avail) |
| { |
| struct device *dev = &rproc->dev; |
| struct rproc_vdev *rvdev; |
| int i, ret; |
| char name[16]; |
| |
| /* make sure resource isn't truncated */ |
| if (sizeof(*rsc) + rsc->num_of_vrings * sizeof(struct fw_rsc_vdev_vring) |
| + rsc->config_len > avail) { |
| dev_err(dev, "vdev rsc is truncated\n"); |
| return -EINVAL; |
| } |
| |
| /* make sure reserved bytes are zeroes */ |
| if (rsc->reserved[0] || rsc->reserved[1]) { |
| dev_err(dev, "vdev rsc has non zero reserved bytes\n"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, "vdev rsc: id %d, dfeatures 0x%x, cfg len %d, %d vrings\n", |
| rsc->id, rsc->dfeatures, rsc->config_len, rsc->num_of_vrings); |
| |
| /* we currently support only two vrings per rvdev */ |
| if (rsc->num_of_vrings > ARRAY_SIZE(rvdev->vring)) { |
| dev_err(dev, "too many vrings: %d\n", rsc->num_of_vrings); |
| return -EINVAL; |
| } |
| |
| rvdev = kzalloc(sizeof(*rvdev), GFP_KERNEL); |
| if (!rvdev) |
| return -ENOMEM; |
| |
| kref_init(&rvdev->refcount); |
| |
| rvdev->id = rsc->id; |
| rvdev->rproc = rproc; |
| rvdev->index = rproc->nb_vdev++; |
| |
| /* Initialise vdev subdevice */ |
| snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index); |
| rvdev->dev.parent = rproc->dev.parent; |
| rvdev->dev.dma_pfn_offset = rproc->dev.parent->dma_pfn_offset; |
| rvdev->dev.release = rproc_rvdev_release; |
| dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name); |
| dev_set_drvdata(&rvdev->dev, rvdev); |
| |
| ret = device_register(&rvdev->dev); |
| if (ret) { |
| put_device(&rvdev->dev); |
| return ret; |
| } |
| /* Make device dma capable by inheriting from parent's capabilities */ |
| set_dma_ops(&rvdev->dev, get_dma_ops(rproc->dev.parent)); |
| |
| ret = dma_coerce_mask_and_coherent(&rvdev->dev, |
| dma_get_mask(rproc->dev.parent)); |
| if (ret) { |
| dev_warn(dev, |
| "Failed to set DMA mask %llx. Trying to continue... %x\n", |
| dma_get_mask(rproc->dev.parent), ret); |
| } |
| |
| /* parse the vrings */ |
| for (i = 0; i < rsc->num_of_vrings; i++) { |
| ret = rproc_parse_vring(rvdev, rsc, i); |
| if (ret) |
| goto free_rvdev; |
| } |
| |
| /* remember the resource offset*/ |
| rvdev->rsc_offset = offset; |
| |
| /* allocate the vring resources */ |
| for (i = 0; i < rsc->num_of_vrings; i++) { |
| ret = rproc_alloc_vring(rvdev, i); |
| if (ret) |
| goto unwind_vring_allocations; |
| } |
| |
| list_add_tail(&rvdev->node, &rproc->rvdevs); |
| |
| rvdev->subdev.start = rproc_vdev_do_start; |
| rvdev->subdev.stop = rproc_vdev_do_stop; |
| |
| rproc_add_subdev(rproc, &rvdev->subdev); |
| |
| return 0; |
| |
| unwind_vring_allocations: |
| for (i--; i >= 0; i--) |
| rproc_free_vring(&rvdev->vring[i]); |
| free_rvdev: |
| device_unregister(&rvdev->dev); |
| return ret; |
| } |
| |
| void rproc_vdev_release(struct kref *ref) |
| { |
| struct rproc_vdev *rvdev = container_of(ref, struct rproc_vdev, refcount); |
| struct rproc_vring *rvring; |
| struct rproc *rproc = rvdev->rproc; |
| int id; |
| |
| for (id = 0; id < ARRAY_SIZE(rvdev->vring); id++) { |
| rvring = &rvdev->vring[id]; |
| rproc_free_vring(rvring); |
| } |
| |
| rproc_remove_subdev(rproc, &rvdev->subdev); |
| list_del(&rvdev->node); |
| device_unregister(&rvdev->dev); |
| } |
| |
| /** |
| * rproc_handle_trace() - handle a shared trace buffer resource |
| * @rproc: the remote processor |
| * @rsc: the trace resource descriptor |
| * @avail: size of available data (for sanity checking the image) |
| * |
| * In case the remote processor dumps trace logs into memory, |
| * export it via debugfs. |
| * |
| * Currently, the 'da' member of @rsc should contain the device address |
| * where the remote processor is dumping the traces. Later we could also |
| * support dynamically allocating this address using the generic |
| * DMA API (but currently there isn't a use case for that). |
| * |
| * Returns 0 on success, or an appropriate error code otherwise |
| */ |
| static int rproc_handle_trace(struct rproc *rproc, struct fw_rsc_trace *rsc, |
| int offset, int avail) |
| { |
| struct rproc_debug_trace *trace; |
| struct device *dev = &rproc->dev; |
| char name[15]; |
| |
| if (sizeof(*rsc) > avail) { |
| dev_err(dev, "trace rsc is truncated\n"); |
| return -EINVAL; |
| } |
| |
| /* make sure reserved bytes are zeroes */ |
| if (rsc->reserved) { |
| dev_err(dev, "trace rsc has non zero reserved bytes\n"); |
| return -EINVAL; |
| } |
| |
| trace = kzalloc(sizeof(*trace), GFP_KERNEL); |
| if (!trace) |
| return -ENOMEM; |
| |
| /* set the trace buffer dma properties */ |
| trace->trace_mem.len = rsc->len; |
| trace->trace_mem.da = rsc->da; |
| |
| /* set pointer on rproc device */ |
| trace->rproc = rproc; |
| |
| /* make sure snprintf always null terminates, even if truncating */ |
| snprintf(name, sizeof(name), "trace%d", rproc->num_traces); |
| |
| /* create the debugfs entry */ |
| trace->tfile = rproc_create_trace_file(name, rproc, trace); |
| if (!trace->tfile) { |
| kfree(trace); |
| return -EINVAL; |
| } |
| |
| list_add_tail(&trace->node, &rproc->traces); |
| |
| rproc->num_traces++; |
| |
| dev_dbg(dev, "%s added: da 0x%x, len 0x%x\n", |
| name, rsc->da, rsc->len); |
| |
| return 0; |
| } |
| |
| /** |
| * rproc_handle_devmem() - handle devmem resource entry |
| * @rproc: remote processor handle |
| * @rsc: the devmem resource entry |
| * @avail: size of available data (for sanity checking the image) |
| * |
| * Remote processors commonly need to access certain on-chip peripherals. |
| * |
| * Some of these remote processors access memory via an iommu device, |
| * and might require us to configure their iommu before they can access |
| * the on-chip peripherals they need. |
| * |
| * This resource entry is a request to map such a peripheral device. |
| * |
| * These devmem entries will contain the physical address of the device in |
| * the 'pa' member. If a specific device address is expected, then 'da' will |
| * contain it (currently this is the only use case supported). 'len' will |
| * contain the size of the physical region we need to map. |
| * |
| * Currently we just "trust" those devmem entries to contain valid physical |
| * addresses, but this is going to change: we want the implementations to |
| * tell us ranges of physical addresses the firmware is allowed to request, |
| * and not allow firmwares to request access to physical addresses that |
| * are outside those ranges. |
| */ |
| static int rproc_handle_devmem(struct rproc *rproc, struct fw_rsc_devmem *rsc, |
| int offset, int avail) |
| { |
| struct rproc_mem_entry *mapping; |
| struct device *dev = &rproc->dev; |
| int ret; |
| |
| /* no point in handling this resource without a valid iommu domain */ |
| if (!rproc->domain) |
| return -EINVAL; |
| |
| if (sizeof(*rsc) > avail) { |
| dev_err(dev, "devmem rsc is truncated\n"); |
| return -EINVAL; |
| } |
| |
| /* make sure reserved bytes are zeroes */ |
| if (rsc->reserved) { |
| dev_err(dev, "devmem rsc has non zero reserved bytes\n"); |
| return -EINVAL; |
| } |
| |
| mapping = kzalloc(sizeof(*mapping), GFP_KERNEL); |
| if (!mapping) |
| return -ENOMEM; |
| |
| ret = iommu_map(rproc->domain, rsc->da, rsc->pa, rsc->len, rsc->flags); |
| if (ret) { |
| dev_err(dev, "failed to map devmem: %d\n", ret); |
| goto out; |
| } |
| |
| /* |
| * We'll need this info later when we'll want to unmap everything |
| * (e.g. on shutdown). |
| * |
| * We can't trust the remote processor not to change the resource |
| * table, so we must maintain this info independently. |
| */ |
| mapping->da = rsc->da; |
| mapping->len = rsc->len; |
| list_add_tail(&mapping->node, &rproc->mappings); |
| |
| dev_dbg(dev, "mapped devmem pa 0x%x, da 0x%x, len 0x%x\n", |
| rsc->pa, rsc->da, rsc->len); |
| |
| return 0; |
| |
| out: |
| kfree(mapping); |
| return ret; |
| } |
| |
| /** |
| * rproc_alloc_carveout() - allocated specified carveout |
| * @rproc: rproc handle |
| * @mem: the memory entry to allocate |
| * |
| * This function allocate specified memory entry @mem using |
| * dma_alloc_coherent() as default allocator |
| */ |
| static int rproc_alloc_carveout(struct rproc *rproc, |
| struct rproc_mem_entry *mem) |
| { |
| struct rproc_mem_entry *mapping = NULL; |
| struct device *dev = &rproc->dev; |
| dma_addr_t dma; |
| void *va; |
| int ret; |
| |
| va = dma_alloc_coherent(dev->parent, mem->len, &dma, GFP_KERNEL); |
| if (!va) { |
| dev_err(dev->parent, |
| "failed to allocate dma memory: len 0x%x\n", mem->len); |
| return -ENOMEM; |
| } |
| |
| dev_dbg(dev, "carveout va %pK, dma %pad, len 0x%x\n", |
| va, &dma, mem->len); |
| |
| if (mem->da != FW_RSC_ADDR_ANY && !rproc->domain) { |
| /* |
| * Check requested da is equal to dma address |
| * and print a warn message in case of missalignment. |
| * Don't stop rproc_start sequence as coprocessor may |
| * build pa to da translation on its side. |
| */ |
| if (mem->da != (u32)dma) |
| dev_warn(dev->parent, |
| "Allocated carveout doesn't fit device address request\n"); |
| } |
| |
| /* |
| * Ok, this is non-standard. |
| * |
| * Sometimes we can't rely on the generic iommu-based DMA API |
| * to dynamically allocate the device address and then set the IOMMU |
| * tables accordingly, because some remote processors might |
| * _require_ us to use hard coded device addresses that their |
| * firmware was compiled with. |
| * |
| * In this case, we must use the IOMMU API directly and map |
| * the memory to the device address as expected by the remote |
| * processor. |
| * |
| * Obviously such remote processor devices should not be configured |
| * to use the iommu-based DMA API: we expect 'dma' to contain the |
| * physical address in this case. |
| */ |
| if (mem->da != FW_RSC_ADDR_ANY && rproc->domain) { |
| mapping = kzalloc(sizeof(*mapping), GFP_KERNEL); |
| if (!mapping) { |
| ret = -ENOMEM; |
| goto dma_free; |
| } |
| |
| ret = iommu_map(rproc->domain, mem->da, dma, mem->len, |
| mem->flags); |
| if (ret) { |
| dev_err(dev, "iommu_map failed: %d\n", ret); |
| goto free_mapping; |
| } |
| |
| /* |
| * We'll need this info later when we'll want to unmap |
| * everything (e.g. on shutdown). |
| * |
| * We can't trust the remote processor not to change the |
| * resource table, so we must maintain this info independently. |
| */ |
| mapping->da = mem->da; |
| mapping->len = mem->len; |
| list_add_tail(&mapping->node, &rproc->mappings); |
| |
| dev_dbg(dev, "carveout mapped 0x%x to %pad\n", |
| mem->da, &dma); |
| } |
| |
| if (mem->da == FW_RSC_ADDR_ANY) { |
| /* Update device address as undefined by requester */ |
| if ((u64)dma & HIGH_BITS_MASK) |
| dev_warn(dev, "DMA address cast in 32bit to fit resource table format\n"); |
| |
| mem->da = (u32)dma; |
| } |
| |
| mem->dma = dma; |
| mem->va = va; |
| |
| return 0; |
| |
| free_mapping: |
| kfree(mapping); |
| dma_free: |
| dma_free_coherent(dev->parent, mem->len, va, dma); |
| return ret; |
| } |
| |
| /** |
| * rproc_release_carveout() - release acquired carveout |
| * @rproc: rproc handle |
| * @mem: the memory entry to release |
| * |
| * This function releases specified memory entry @mem allocated via |
| * rproc_alloc_carveout() function by @rproc. |
| */ |
| static int rproc_release_carveout(struct rproc *rproc, |
| struct rproc_mem_entry *mem) |
| { |
| struct device *dev = &rproc->dev; |
| |
| /* clean up carveout allocations */ |
| dma_free_coherent(dev->parent, mem->len, mem->va, mem->dma); |
| return 0; |
| } |
| |
| /** |
| * rproc_handle_carveout() - handle phys contig memory allocation requests |
| * @rproc: rproc handle |
| * @rsc: the resource entry |
| * @avail: size of available data (for image validation) |
| * |
| * This function will handle firmware requests for allocation of physically |
| * contiguous memory regions. |
| * |
| * These request entries should come first in the firmware's resource table, |
| * as other firmware entries might request placing other data objects inside |
| * these memory regions (e.g. data/code segments, trace resource entries, ...). |
| * |
| * Allocating memory this way helps utilizing the reserved physical memory |
| * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries |
| * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB |
| * pressure is important; it may have a substantial impact on performance. |
| */ |
| static int rproc_handle_carveout(struct rproc *rproc, |
| struct fw_rsc_carveout *rsc, |
| int offset, int avail) |
| { |
| struct rproc_mem_entry *carveout; |
| struct device *dev = &rproc->dev; |
| |
| if (sizeof(*rsc) > avail) { |
| dev_err(dev, "carveout rsc is truncated\n"); |
| return -EINVAL; |
| } |
| |
| /* make sure reserved bytes are zeroes */ |
| if (rsc->reserved) { |
| dev_err(dev, "carveout rsc has non zero reserved bytes\n"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, "carveout rsc: name: %s, da 0x%x, pa 0x%x, len 0x%x, flags 0x%x\n", |
| rsc->name, rsc->da, rsc->pa, rsc->len, rsc->flags); |
| |
| /* |
| * Check carveout rsc already part of a registered carveout, |
| * Search by name, then check the da and length |
| */ |
| carveout = rproc_find_carveout_by_name(rproc, rsc->name); |
| |
| if (carveout) { |
| if (carveout->rsc_offset != FW_RSC_ADDR_ANY) { |
| dev_err(dev, |
| "Carveout already associated to resource table\n"); |
| return -ENOMEM; |
| } |
| |
| if (rproc_check_carveout_da(rproc, carveout, rsc->da, rsc->len)) |
| return -ENOMEM; |
| |
| /* Update memory carveout with resource table info */ |
| carveout->rsc_offset = offset; |
| carveout->flags = rsc->flags; |
| |
| return 0; |
| } |
| |
| /* Register carveout in in list */ |
| carveout = rproc_mem_entry_init(dev, NULL, 0, rsc->len, rsc->da, |
| rproc_alloc_carveout, |
| rproc_release_carveout, rsc->name); |
| if (!carveout) { |
| dev_err(dev, "Can't allocate memory entry structure\n"); |
| return -ENOMEM; |
| } |
| |
| carveout->flags = rsc->flags; |
| carveout->rsc_offset = offset; |
| rproc_add_carveout(rproc, carveout); |
| |
| return 0; |
| } |
| |
| /** |
| * rproc_add_carveout() - register an allocated carveout region |
| * @rproc: rproc handle |
| * @mem: memory entry to register |
| * |
| * This function registers specified memory entry in @rproc carveouts list. |
| * Specified carveout should have been allocated before registering. |
| */ |
| void rproc_add_carveout(struct rproc *rproc, struct rproc_mem_entry *mem) |
| { |
| list_add_tail(&mem->node, &rproc->carveouts); |
| } |
| EXPORT_SYMBOL(rproc_add_carveout); |
| |
| /** |
| * rproc_mem_entry_init() - allocate and initialize rproc_mem_entry struct |
| * @dev: pointer on device struct |
| * @va: virtual address |
| * @dma: dma address |
| * @len: memory carveout length |
| * @da: device address |
| * @alloc: memory carveout allocation function |
| * @release: memory carveout release function |
| * @name: carveout name |
| * |
| * This function allocates a rproc_mem_entry struct and fill it with parameters |
| * provided by client. |
| */ |
| struct rproc_mem_entry * |
| rproc_mem_entry_init(struct device *dev, |
| void *va, dma_addr_t dma, int len, u32 da, |
| int (*alloc)(struct rproc *, struct rproc_mem_entry *), |
| int (*release)(struct rproc *, struct rproc_mem_entry *), |
| const char *name, ...) |
| { |
| struct rproc_mem_entry *mem; |
| va_list args; |
| |
| mem = kzalloc(sizeof(*mem), GFP_KERNEL); |
| if (!mem) |
| return mem; |
| |
| mem->va = va; |
| mem->dma = dma; |
| mem->da = da; |
| mem->len = len; |
| mem->alloc = alloc; |
| mem->release = release; |
| mem->rsc_offset = FW_RSC_ADDR_ANY; |
| mem->of_resm_idx = -1; |
| |
| va_start(args, name); |
| vsnprintf(mem->name, sizeof(mem->name), name, args); |
| va_end(args); |
| |
| return mem; |
| } |
| EXPORT_SYMBOL(rproc_mem_entry_init); |
| |
| /** |
| * rproc_of_resm_mem_entry_init() - allocate and initialize rproc_mem_entry struct |
| * from a reserved memory phandle |
| * @dev: pointer on device struct |
| * @of_resm_idx: reserved memory phandle index in "memory-region" |
| * @len: memory carveout length |
| * @da: device address |
| * @name: carveout name |
| * |
| * This function allocates a rproc_mem_entry struct and fill it with parameters |
| * provided by client. |
| */ |
| struct rproc_mem_entry * |
| rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, int len, |
| u32 da, const char *name, ...) |
| { |
| struct rproc_mem_entry *mem; |
| va_list args; |
| |
| mem = kzalloc(sizeof(*mem), GFP_KERNEL); |
| if (!mem) |
| return mem; |
| |
| mem->da = da; |
| mem->len = len; |
| mem->rsc_offset = FW_RSC_ADDR_ANY; |
| mem->of_resm_idx = of_resm_idx; |
| |
| va_start(args, name); |
| vsnprintf(mem->name, sizeof(mem->name), name, args); |
| va_end(args); |
| |
| return mem; |
| } |
| EXPORT_SYMBOL(rproc_of_resm_mem_entry_init); |
| |
| /** |
| * A lookup table for resource handlers. The indices are defined in |
| * enum fw_resource_type. |
| */ |
| static rproc_handle_resource_t rproc_loading_handlers[RSC_LAST] = { |
| [RSC_CARVEOUT] = (rproc_handle_resource_t)rproc_handle_carveout, |
| [RSC_DEVMEM] = (rproc_handle_resource_t)rproc_handle_devmem, |
| [RSC_TRACE] = (rproc_handle_resource_t)rproc_handle_trace, |
| [RSC_VDEV] = (rproc_handle_resource_t)rproc_handle_vdev, |
| }; |
| |
| /* handle firmware resource entries before booting the remote processor */ |
| static int rproc_handle_resources(struct rproc *rproc, |
| rproc_handle_resource_t handlers[RSC_LAST]) |
| { |
| struct device *dev = &rproc->dev; |
| rproc_handle_resource_t handler; |
| int ret = 0, i; |
| |
| if (!rproc->table_ptr) |
| return 0; |
| |
| for (i = 0; i < rproc->table_ptr->num; i++) { |
| int offset = rproc->table_ptr->offset[i]; |
| struct fw_rsc_hdr *hdr = (void *)rproc->table_ptr + offset; |
| int avail = rproc->table_sz - offset - sizeof(*hdr); |
| void *rsc = (void *)hdr + sizeof(*hdr); |
| |
| /* make sure table isn't truncated */ |
| if (avail < 0) { |
| dev_err(dev, "rsc table is truncated\n"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, "rsc: type %d\n", hdr->type); |
| |
| if (hdr->type >= RSC_VENDOR_START && |
| hdr->type <= RSC_VENDOR_END) { |
| ret = rproc_handle_rsc(rproc, hdr->type, rsc, |
| offset + sizeof(*hdr), avail); |
| if (ret == RSC_HANDLED) |
| continue; |
| else if (ret < 0) |
| break; |
| |
| dev_warn(dev, "unsupported vendor resource %d\n", |
| hdr->type); |
| continue; |
| } |
| |
| if (hdr->type >= RSC_LAST) { |
| dev_warn(dev, "unsupported resource %d\n", hdr->type); |
| continue; |
| } |
| |
| handler = handlers[hdr->type]; |
| if (!handler) |
| continue; |
| |
| ret = handler(rproc, rsc, offset + sizeof(*hdr), avail); |
| if (ret) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int rproc_prepare_subdevices(struct rproc *rproc) |
| { |
| struct rproc_subdev *subdev; |
| int ret; |
| |
| list_for_each_entry(subdev, &rproc->subdevs, node) { |
| if (subdev->prepare) { |
| ret = subdev->prepare(subdev); |
| if (ret) |
| goto unroll_preparation; |
| } |
| } |
| |
| return 0; |
| |
| unroll_preparation: |
| list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) { |
| if (subdev->unprepare) |
| subdev->unprepare(subdev); |
| } |
| |
| return ret; |
| } |
| |
| static int rproc_start_subdevices(struct rproc *rproc) |
| { |
| struct rproc_subdev *subdev; |
| int ret; |
| |
| list_for_each_entry(subdev, &rproc->subdevs, node) { |
| if (subdev->start) { |
| ret = subdev->start(subdev); |
| if (ret) |
| goto unroll_registration; |
| } |
| } |
| |
| return 0; |
| |
| unroll_registration: |
| list_for_each_entry_continue_reverse(subdev, &rproc->subdevs, node) { |
| if (subdev->stop) |
| subdev->stop(subdev, true); |
| } |
| |
| return ret; |
| } |
| |
| static void rproc_stop_subdevices(struct rproc *rproc, bool crashed) |
| { |
| struct rproc_subdev *subdev; |
| |
| list_for_each_entry_reverse(subdev, &rproc->subdevs, node) { |
| if (subdev->stop) |
| subdev->stop(subdev, crashed); |
| } |
| } |
| |
| static void rproc_unprepare_subdevices(struct rproc *rproc) |
| { |
| struct rproc_subdev *subdev; |
| |
| list_for_each_entry_reverse(subdev, &rproc->subdevs, node) { |
| if (subdev->unprepare) |
| subdev->unprepare(subdev); |
| } |
| } |
| |
| /** |
| * rproc_alloc_registered_carveouts() - allocate all carveouts registered |
| * in the list |
| * @rproc: the remote processor handle |
| * |
| * This function parses registered carveout list, performs allocation |
| * if alloc() ops registered and updates resource table information |
| * if rsc_offset set. |
| * |
| * Return: 0 on success |
| */ |
| static int rproc_alloc_registered_carveouts(struct rproc *rproc) |
| { |
| struct rproc_mem_entry *entry, *tmp; |
| struct fw_rsc_carveout *rsc; |
| struct device *dev = &rproc->dev; |
| u64 pa; |
| int ret; |
| |
| list_for_each_entry_safe(entry, tmp, &rproc->carveouts, node) { |
| if (entry->alloc) { |
| ret = entry->alloc(rproc, entry); |
| if (ret) { |
| dev_err(dev, "Unable to allocate carveout %s: %d\n", |
| entry->name, ret); |
| return -ENOMEM; |
| } |
| } |
| |
| if (entry->rsc_offset != FW_RSC_ADDR_ANY) { |
| /* update resource table */ |
| rsc = (void *)rproc->table_ptr + entry->rsc_offset; |
| |
| /* |
| * Some remote processors might need to know the pa |
| * even though they are behind an IOMMU. E.g., OMAP4's |
| * remote M3 processor needs this so it can control |
| * on-chip hardware accelerators that are not behind |
| * the IOMMU, and therefor must know the pa. |
| * |
| * Generally we don't want to expose physical addresses |
| * if we don't have to (remote processors are generally |
| * _not_ trusted), so we might want to do this only for |
| * remote processor that _must_ have this (e.g. OMAP4's |
| * dual M3 subsystem). |
| * |
| * Non-IOMMU processors might also want to have this info. |
| * In this case, the device address and the physical address |
| * are the same. |
| */ |
| |
| /* Use va if defined else dma to generate pa */ |
| if (entry->va) |
| pa = (u64)rproc_va_to_pa(entry->va); |
| else |
| pa = (u64)entry->dma; |
| |
| if (((u64)pa) & HIGH_BITS_MASK) |
| dev_warn(dev, |
| "Physical address cast in 32bit to fit resource table format\n"); |
| |
| rsc->pa = (u32)pa; |
| rsc->da = entry->da; |
| rsc->len = entry->len; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * rproc_coredump_cleanup() - clean up dump_segments list |
| * @rproc: the remote processor handle |
| */ |
| static void rproc_coredump_cleanup(struct rproc *rproc) |
| { |
| struct rproc_dump_segment *entry, *tmp; |
| |
| list_for_each_entry_safe(entry, tmp, &rproc->dump_segments, node) { |
| list_del(&entry->node); |
| kfree(entry); |
| } |
| } |
| |
| /** |
| * rproc_resource_cleanup() - clean up and free all acquired resources |
| * @rproc: rproc handle |
| * |
| * This function will free all resources acquired for @rproc, and it |
| * is called whenever @rproc either shuts down or fails to boot. |
| */ |
| static void rproc_resource_cleanup(struct rproc *rproc) |
| { |
| struct rproc_mem_entry *entry, *tmp; |
| struct rproc_debug_trace *trace, *ttmp; |
| struct rproc_vdev *rvdev, *rvtmp; |
| struct device *dev = &rproc->dev; |
| |
| /* clean up debugfs trace entries */ |
| list_for_each_entry_safe(trace, ttmp, &rproc->traces, node) { |
| rproc_remove_trace_file(trace->tfile); |
| rproc->num_traces--; |
| list_del(&trace->node); |
| kfree(trace); |
| } |
| |
| /* clean up iommu mapping entries */ |
| list_for_each_entry_safe(entry, tmp, &rproc->mappings, node) { |
| size_t unmapped; |
| |
| unmapped = iommu_unmap(rproc->domain, entry->da, entry->len); |
| if (unmapped != entry->len) { |
| /* nothing much to do besides complaining */ |
| dev_err(dev, "failed to unmap %u/%zu\n", entry->len, |
| unmapped); |
| } |
| |
| list_del(&entry->node); |
| kfree(entry); |
| } |
| |
| /* clean up carveout allocations */ |
| list_for_each_entry_safe(entry, tmp, &rproc->carveouts, node) { |
| if (entry->release) |
| entry->release(rproc, entry); |
| list_del(&entry->node); |
| kfree(entry); |
| } |
| |
| /* clean up remote vdev entries */ |
| list_for_each_entry_safe(rvdev, rvtmp, &rproc->rvdevs, node) |
| kref_put(&rvdev->refcount, rproc_vdev_release); |
| |
| rproc_coredump_cleanup(rproc); |
| } |
| |
| static int rproc_start(struct rproc *rproc, const struct firmware *fw) |
| { |
| struct resource_table *loaded_table; |
| struct device *dev = &rproc->dev; |
| int ret; |
| |
| /* load the ELF segments to memory */ |
| ret = rproc_load_segments(rproc, fw); |
| if (ret) { |
| dev_err(dev, "Failed to load program segments: %d\n", ret); |
| return ret; |
| } |
| |
| /* |
| * The starting device has been given the rproc->cached_table as the |
| * resource table. The address of the vring along with the other |
| * allocated resources (carveouts etc) is stored in cached_table. |
| * In order to pass this information to the remote device we must copy |
| * this information to device memory. We also update the table_ptr so |
| * that any subsequent changes will be applied to the loaded version. |
| */ |
| loaded_table = rproc_find_loaded_rsc_table(rproc, fw); |
| if (loaded_table) { |
| memcpy(loaded_table, rproc->cached_table, rproc->table_sz); |
| rproc->table_ptr = loaded_table; |
| } |
| |
| ret = rproc_prepare_subdevices(rproc); |
| if (ret) { |
| dev_err(dev, "failed to prepare subdevices for %s: %d\n", |
| rproc->name, ret); |
| goto reset_table_ptr; |
| } |
| |
| /* power up the remote processor */ |
| ret = rproc->ops->start(rproc); |
| if (ret) { |
| dev_err(dev, "can't start rproc %s: %d\n", rproc->name, ret); |
| goto unprepare_subdevices; |
| } |
| |
| /* Start any subdevices for the remote processor */ |
| ret = rproc_start_subdevices(rproc); |
| if (ret) { |
| dev_err(dev, "failed to probe subdevices for %s: %d\n", |
| rproc->name, ret); |
| goto stop_rproc; |
| } |
| |
| rproc->state = RPROC_RUNNING; |
| |
| dev_info(dev, "remote processor %s is now up\n", rproc->name); |
| |
| return 0; |
| |
| stop_rproc: |
| rproc->ops->stop(rproc); |
| unprepare_subdevices: |
| rproc_unprepare_subdevices(rproc); |
| reset_table_ptr: |
| rproc->table_ptr = rproc->cached_table; |
| |
| return ret; |
| } |
| |
| /* |
| * take a firmware and boot a remote processor with it. |
| */ |
| static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw) |
| { |
| struct device *dev = &rproc->dev; |
| const char *name = rproc->firmware; |
| int ret; |
| |
| ret = rproc_fw_sanity_check(rproc, fw); |
| if (ret) |
| return ret; |
| |
| dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size); |
| |
| /* |
| * if enabling an IOMMU isn't relevant for this rproc, this is |
| * just a nop |
| */ |
| ret = rproc_enable_iommu(rproc); |
| if (ret) { |
| dev_err(dev, "can't enable iommu: %d\n", ret); |
| return ret; |
| } |
| |
| rproc->bootaddr = rproc_get_boot_addr(rproc, fw); |
| |
| /* Load resource table, core dump segment list etc from the firmware */ |
| ret = rproc_parse_fw(rproc, fw); |
| if (ret) |
| goto disable_iommu; |
| |
| /* reset max_notifyid */ |
| rproc->max_notifyid = -1; |
| |
| /* reset handled vdev */ |
| rproc->nb_vdev = 0; |
| |
| /* handle fw resources which are required to boot rproc */ |
| ret = rproc_handle_resources(rproc, rproc_loading_handlers); |
| if (ret) { |
| dev_err(dev, "Failed to process resources: %d\n", ret); |
| goto clean_up_resources; |
| } |
| |
| /* Allocate carveout resources associated to rproc */ |
| ret = rproc_alloc_registered_carveouts(rproc); |
| if (ret) { |
| dev_err(dev, "Failed to allocate associated carveouts: %d\n", |
| ret); |
| goto clean_up_resources; |
| } |
| |
| ret = rproc_start(rproc, fw); |
| if (ret) |
| goto clean_up_resources; |
| |
| return 0; |
| |
| clean_up_resources: |
| rproc_resource_cleanup(rproc); |
| kfree(rproc->cached_table); |
| rproc->cached_table = NULL; |
| rproc->table_ptr = NULL; |
| disable_iommu: |
| rproc_disable_iommu(rproc); |
| return ret; |
| } |
| |
| /* |
| * take a firmware and boot it up. |
| * |
| * Note: this function is called asynchronously upon registration of the |
| * remote processor (so we must wait until it completes before we try |
| * to unregister the device. one other option is just to use kref here, |
| * that might be cleaner). |
| */ |
| static void rproc_auto_boot_callback(const struct firmware *fw, void *context) |
| { |
| struct rproc *rproc = context; |
| |
| rproc_boot(rproc); |
| |
| release_firmware(fw); |
| } |
| |
| static int rproc_trigger_auto_boot(struct rproc *rproc) |
| { |
| int ret; |
| |
| /* |
| * We're initiating an asynchronous firmware loading, so we can |
| * be built-in kernel code, without hanging the boot process. |
| */ |
| ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, |
| rproc->firmware, &rproc->dev, GFP_KERNEL, |
| rproc, rproc_auto_boot_callback); |
| if (ret < 0) |
| dev_err(&rproc->dev, "request_firmware_nowait err: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int rproc_stop(struct rproc *rproc, bool crashed) |
| { |
| struct device *dev = &rproc->dev; |
| int ret; |
| |
| /* Stop any subdevices for the remote processor */ |
| rproc_stop_subdevices(rproc, crashed); |
| |
| /* the installed resource table is no longer accessible */ |
| rproc->table_ptr = rproc->cached_table; |
| |
| /* power off the remote processor */ |
| ret = rproc->ops->stop(rproc); |
| if (ret) { |
| dev_err(dev, "can't stop rproc: %d\n", ret); |
| return ret; |
| } |
| |
| rproc_unprepare_subdevices(rproc); |
| |
| rproc->state = RPROC_OFFLINE; |
| |
| dev_info(dev, "stopped remote processor %s\n", rproc->name); |
| |
| return 0; |
| } |
| |
| /** |
| * rproc_coredump_add_segment() - add segment of device memory to coredump |
| * @rproc: handle of a remote processor |
| * @da: device address |
| * @size: size of segment |
| * |
| * Add device memory to the list of segments to be included in a coredump for |
| * the remoteproc. |
| * |
| * Return: 0 on success, negative errno on error. |
| */ |
| int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size) |
| { |
| struct rproc_dump_segment *segment; |
| |
| segment = kzalloc(sizeof(*segment), GFP_KERNEL); |
| if (!segment) |
| return -ENOMEM; |
| |
| segment->da = da; |
| segment->size = size; |
| |
| list_add_tail(&segment->node, &rproc->dump_segments); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(rproc_coredump_add_segment); |
| |
| /** |
| * rproc_coredump_add_custom_segment() - add custom coredump segment |
| * @rproc: handle of a remote processor |
| * @da: device address |
| * @size: size of segment |
| * @dumpfn: custom dump function called for each segment during coredump |
| * @priv: private data |
| * |
| * Add device memory to the list of segments to be included in the coredump |
| * and associate the segment with the given custom dump function and private |
| * data. |
| * |
| * Return: 0 on success, negative errno on error. |
| */ |
| int rproc_coredump_add_custom_segment(struct rproc *rproc, |
| dma_addr_t da, size_t size, |
| void (*dumpfn)(struct rproc *rproc, |
| struct rproc_dump_segment *segment, |
| void *dest), |
| void *priv) |
| { |
| struct rproc_dump_segment *segment; |
| |
| segment = kzalloc(sizeof(*segment), GFP_KERNEL); |
| if (!segment) |
| return -ENOMEM; |
| |
| segment->da = da; |
| segment->size = size; |
| segment->priv = priv; |
| segment->dump = dumpfn; |
| |
| list_add_tail(&segment->node, &rproc->dump_segments); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(rproc_coredump_add_custom_segment); |
| |
| /** |
| * rproc_coredump() - perform coredump |
| * @rproc: rproc handle |
| * |
| * This function will generate an ELF header for the registered segments |
| * and create a devcoredump device associated with rproc. |
| */ |
| static void rproc_coredump(struct rproc *rproc) |
| { |
| struct rproc_dump_segment *segment; |
| struct elf32_phdr *phdr; |
| struct elf32_hdr *ehdr; |
| size_t data_size; |
| size_t offset; |
| void *data; |
| void *ptr; |
| int phnum = 0; |
| |
| if (list_empty(&rproc->dump_segments)) |
| return; |
| |
| data_size = sizeof(*ehdr); |
| list_for_each_entry(segment, &rproc->dump_segments, node) { |
| data_size += sizeof(*phdr) + segment->size; |
| |
| phnum++; |
| } |
| |
| data = vmalloc(data_size); |
| if (!data) |
| return; |
| |
| ehdr = data; |
| |
| memset(ehdr, 0, sizeof(*ehdr)); |
| memcpy(ehdr->e_ident, ELFMAG, SELFMAG); |
| ehdr->e_ident[EI_CLASS] = ELFCLASS32; |
| ehdr->e_ident[EI_DATA] = ELFDATA2LSB; |
| ehdr->e_ident[EI_VERSION] = EV_CURRENT; |
| ehdr->e_ident[EI_OSABI] = ELFOSABI_NONE; |
| ehdr->e_type = ET_CORE; |
| ehdr->e_machine = EM_NONE; |
| ehdr->e_version = EV_CURRENT; |
| ehdr->e_entry = rproc->bootaddr; |
| ehdr->e_phoff = sizeof(*ehdr); |
| ehdr->e_ehsize = sizeof(*ehdr); |
| ehdr->e_phentsize = sizeof(*phdr); |
| ehdr->e_phnum = phnum; |
| |
| phdr = data + ehdr->e_phoff; |
| offset = ehdr->e_phoff + sizeof(*phdr) * ehdr->e_phnum; |
| list_for_each_entry(segment, &rproc->dump_segments, node) { |
| memset(phdr, 0, sizeof(*phdr)); |
| phdr->p_type = PT_LOAD; |
| phdr->p_offset = offset; |
| phdr->p_vaddr = segment->da; |
| phdr->p_paddr = segment->da; |
| phdr->p_filesz = segment->size; |
| phdr->p_memsz = segment->size; |
| phdr->p_flags = PF_R | PF_W | PF_X; |
| phdr->p_align = 0; |
| |
| if (segment->dump) { |
| segment->dump(rproc, segment, data + offset); |
| } else { |
| ptr = rproc_da_to_va(rproc, segment->da, segment->size); |
| if (!ptr) { |
| dev_err(&rproc->dev, |
| "invalid coredump segment (%pad, %zu)\n", |
| &segment->da, segment->size); |
| memset(data + offset, 0xff, segment->size); |
| } else { |
| memcpy(data + offset, ptr, segment->size); |
| } |
| } |
| |
| offset += phdr->p_filesz; |
| phdr++; |
| } |
| |
| dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL); |
| } |
| |
| /** |
| * rproc_trigger_recovery() - recover a remoteproc |
| * @rproc: the remote processor |
| * |
| * The recovery is done by resetting all the virtio devices, that way all the |
| * rpmsg drivers will be reseted along with the remote processor making the |
| * remoteproc functional again. |
| * |
| * This function can sleep, so it cannot be called from atomic context. |
| */ |
| int rproc_trigger_recovery(struct rproc *rproc) |
| { |
| const struct firmware *firmware_p; |
| struct device *dev = &rproc->dev; |
| int ret; |
| |
| dev_err(dev, "recovering %s\n", rproc->name); |
| |
| ret = mutex_lock_interruptible(&rproc->lock); |
| if (ret) |
| return ret; |
| |
| ret = rproc_stop(rproc, true); |
| if (ret) |
| goto unlock_mutex; |
| |
| /* generate coredump */ |
| rproc_coredump(rproc); |
| |
| /* load firmware */ |
| ret = request_firmware(&firmware_p, rproc->firmware, dev); |
| if (ret < 0) { |
| dev_err(dev, "request_firmware failed: %d\n", ret); |
| goto unlock_mutex; |
| } |
| |
| /* boot the remote processor up again */ |
| ret = rproc_start(rproc, firmware_p); |
| |
| release_firmware(firmware_p); |
| |
| unlock_mutex: |
| mutex_unlock(&rproc->lock); |
| return ret; |
| } |
| |
| /** |
| * rproc_crash_handler_work() - handle a crash |
| * |
| * This function needs to handle everything related to a crash, like cpu |
| * registers and stack dump, information to help to debug the fatal error, etc. |
| */ |
| static void rproc_crash_handler_work(struct work_struct *work) |
| { |
| struct rproc *rproc = container_of(work, struct rproc, crash_handler); |
| struct device *dev = &rproc->dev; |
| |
| dev_dbg(dev, "enter %s\n", __func__); |
| |
| mutex_lock(&rproc->lock); |
| |
| if (rproc->state == RPROC_CRASHED || rproc->state == RPROC_OFFLINE) { |
| /* handle only the first crash detected */ |
| mutex_unlock(&rproc->lock); |
| return; |
| } |
| |
| rproc->state = RPROC_CRASHED; |
| dev_err(dev, "handling crash #%u in %s\n", ++rproc->crash_cnt, |
| rproc->name); |
| |
| mutex_unlock(&rproc->lock); |
| |
| if (!rproc->recovery_disabled) |
| rproc_trigger_recovery(rproc); |
| } |
| |
| /** |
| * rproc_boot() - boot a remote processor |
| * @rproc: handle of a remote processor |
| * |
| * Boot a remote processor (i.e. load its firmware, power it on, ...). |
| * |
| * If the remote processor is already powered on, this function immediately |
| * returns (successfully). |
| * |
| * Returns 0 on success, and an appropriate error value otherwise. |
| */ |
| int rproc_boot(struct rproc *rproc) |
| { |
| const struct firmware *firmware_p; |
| struct device *dev; |
| int ret; |
| |
| if (!rproc) { |
| pr_err("invalid rproc handle\n"); |
| return -EINVAL; |
| } |
| |
| dev = &rproc->dev; |
| |
| ret = mutex_lock_interruptible(&rproc->lock); |
| if (ret) { |
| dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, ret); |
| return ret; |
| } |
| |
| if (rproc->state == RPROC_DELETED) { |
| ret = -ENODEV; |
| dev_err(dev, "can't boot deleted rproc %s\n", rproc->name); |
| goto unlock_mutex; |
| } |
| |
| /* skip the boot process if rproc is already powered up */ |
| if (atomic_inc_return(&rproc->power) > 1) { |
| ret = 0; |
| goto unlock_mutex; |
| } |
| |
| dev_info(dev, "powering up %s\n", rproc->name); |
| |
| /* load firmware */ |
| ret = request_firmware(&firmware_p, rproc->firmware, dev); |
| if (ret < 0) { |
| dev_err(dev, "request_firmware failed: %d\n", ret); |
| goto downref_rproc; |
| } |
| |
| ret = rproc_fw_boot(rproc, firmware_p); |
| |
| release_firmware(firmware_p); |
| |
| downref_rproc: |
| if (ret) |
| atomic_dec(&rproc->power); |
| unlock_mutex: |
| mutex_unlock(&rproc->lock); |
| return ret; |
| } |
| EXPORT_SYMBOL(rproc_boot); |
| |
| /** |
| * rproc_shutdown() - power off the remote processor |
| * @rproc: the remote processor |
| * |
| * Power off a remote processor (previously booted with rproc_boot()). |
| * |
| * In case @rproc is still being used by an additional user(s), then |
| * this function will just decrement the power refcount and exit, |
| * without really powering off the device. |
| * |
| * Every call to rproc_boot() must (eventually) be accompanied by a call |
| * to rproc_shutdown(). Calling rproc_shutdown() redundantly is a bug. |
| * |
| * Notes: |
| * - we're not decrementing the rproc's refcount, only the power refcount. |
| * which means that the @rproc handle stays valid even after rproc_shutdown() |
| * returns, and users can still use it with a subsequent rproc_boot(), if |
| * needed. |
| */ |
| void rproc_shutdown(struct rproc *rproc) |
| { |
| struct device *dev = &rproc->dev; |
| int ret; |
| |
| ret = mutex_lock_interruptible(&rproc->lock); |
| if (ret) { |
| dev_err(dev, "can't lock rproc %s: %d\n", rproc->name, ret); |
| return; |
| } |
| |
| /* if the remote proc is still needed, bail out */ |
| if (!atomic_dec_and_test(&rproc->power)) |
| goto out; |
| |
| ret = rproc_stop(rproc, false); |
| if (ret) { |
| atomic_inc(&rproc->power); |
| goto out; |
| } |
| |
| /* clean up all acquired resources */ |
| rproc_resource_cleanup(rproc); |
| |
| rproc_disable_iommu(rproc); |
| |
| /* Free the copy of the resource table */ |
| kfree(rproc->cached_table); |
| rproc->cached_table = NULL; |
| rproc->table_ptr = NULL; |
| out: |
| mutex_unlock(&rproc->lock); |
| } |
| EXPORT_SYMBOL(rproc_shutdown); |
| |
| /** |
| * rproc_get_by_phandle() - find a remote processor by phandle |
| * @phandle: phandle to the rproc |
| * |
| * Finds an rproc handle using the remote processor's phandle, and then |
| * return a handle to the rproc. |
| * |
| * This function increments the remote processor's refcount, so always |
| * use rproc_put() to decrement it back once rproc isn't needed anymore. |
| * |
| * Returns the rproc handle on success, and NULL on failure. |
| */ |
| #ifdef CONFIG_OF |
| struct rproc *rproc_get_by_phandle(phandle phandle) |
| { |
| struct rproc *rproc = NULL, *r; |
| struct device_node *np; |
| |
| np = of_find_node_by_phandle(phandle); |
| if (!np) |
| return NULL; |
| |
| mutex_lock(&rproc_list_mutex); |
| list_for_each_entry(r, &rproc_list, node) { |
| if (r->dev.parent && r->dev.parent->of_node == np) { |
| /* prevent underlying implementation from being removed */ |
| if (!try_module_get(r->dev.parent->driver->owner)) { |
| dev_err(&r->dev, "can't get owner\n"); |
| break; |
| } |
| |
| rproc = r; |
| get_device(&rproc->dev); |
| break; |
| } |
| } |
| mutex_unlock(&rproc_list_mutex); |
| |
| of_node_put(np); |
| |
| return rproc; |
| } |
| #else |
| struct rproc *rproc_get_by_phandle(phandle phandle) |
| { |
| return NULL; |
| } |
| #endif |
| EXPORT_SYMBOL(rproc_get_by_phandle); |
| |
| /** |
| * rproc_add() - register a remote processor |
| * @rproc: the remote processor handle to register |
| * |
| * Registers @rproc with the remoteproc framework, after it has been |
| * allocated with rproc_alloc(). |
| * |
| * This is called by the platform-specific rproc implementation, whenever |
| * a new remote processor device is probed. |
| * |
| * Returns 0 on success and an appropriate error code otherwise. |
| * |
| * Note: this function initiates an asynchronous firmware loading |
| * context, which will look for virtio devices supported by the rproc's |
| * firmware. |
| * |
| * If found, those virtio devices will be created and added, so as a result |
| * of registering this remote processor, additional virtio drivers might be |
| * probed. |
| */ |
| int rproc_add(struct rproc *rproc) |
| { |
| struct device *dev = &rproc->dev; |
| int ret; |
| |
| ret = device_add(dev); |
| if (ret < 0) |
| return ret; |
| |
| dev_info(dev, "%s is available\n", rproc->name); |
| |
| /* create debugfs entries */ |
| rproc_create_debug_dir(rproc); |
| |
| /* if rproc is marked always-on, request it to boot */ |
| if (rproc->auto_boot) { |
| ret = rproc_trigger_auto_boot(rproc); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* expose to rproc_get_by_phandle users */ |
| mutex_lock(&rproc_list_mutex); |
| list_add(&rproc->node, &rproc_list); |
| mutex_unlock(&rproc_list_mutex); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(rproc_add); |
| |
| /** |
| * rproc_type_release() - release a remote processor instance |
| * @dev: the rproc's device |
| * |
| * This function should _never_ be called directly. |
| * |
| * It will be called by the driver core when no one holds a valid pointer |
| * to @dev anymore. |
| */ |
| static void rproc_type_release(struct device *dev) |
| { |
| struct rproc *rproc = container_of(dev, struct rproc, dev); |
| |
| dev_info(&rproc->dev, "releasing %s\n", rproc->name); |
| |
| idr_destroy(&rproc->notifyids); |
| |
| if (rproc->index >= 0) |
| ida_simple_remove(&rproc_dev_index, rproc->index); |
| |
| kfree(rproc->firmware); |
| kfree(rproc->ops); |
| kfree(rproc); |
| } |
| |
| static const struct device_type rproc_type = { |
| .name = "remoteproc", |
| .release = rproc_type_release, |
| }; |
| |
| /** |
| * rproc_alloc() - allocate a remote processor handle |
| * @dev: the underlying device |
| * @name: name of this remote processor |
| * @ops: platform-specific handlers (mainly start/stop) |
| * @firmware: name of firmware file to load, can be NULL |
| * @len: length of private data needed by the rproc driver (in bytes) |
| * |
| * Allocates a new remote processor handle, but does not register |
| * it yet. if @firmware is NULL, a default name is used. |
| * |
| * This function should be used by rproc implementations during initialization |
| * of the remote processor. |
| * |
| * After creating an rproc handle using this function, and when ready, |
| * implementations should then call rproc_add() to complete |
| * the registration of the remote processor. |
| * |
| * On success the new rproc is returned, and on failure, NULL. |
| * |
| * Note: _never_ directly deallocate @rproc, even if it was not registered |
| * yet. Instead, when you need to unroll rproc_alloc(), use rproc_free(). |
| */ |
| struct rproc *rproc_alloc(struct device *dev, const char *name, |
| const struct rproc_ops *ops, |
| const char *firmware, int len) |
| { |
| struct rproc *rproc; |
| char *p, *template = "rproc-%s-fw"; |
| int name_len; |
| |
| if (!dev || !name || !ops) |
| return NULL; |
| |
| if (!firmware) { |
| /* |
| * If the caller didn't pass in a firmware name then |
| * construct a default name. |
| */ |
| name_len = strlen(name) + strlen(template) - 2 + 1; |
| p = kmalloc(name_len, GFP_KERNEL); |
| if (!p) |
| return NULL; |
| snprintf(p, name_len, template, name); |
| } else { |
| p = kstrdup(firmware, GFP_KERNEL); |
| if (!p) |
| return NULL; |
| } |
| |
| rproc = kzalloc(sizeof(struct rproc) + len, GFP_KERNEL); |
| if (!rproc) { |
| kfree(p); |
| return NULL; |
| } |
| |
| rproc->ops = kmemdup(ops, sizeof(*ops), GFP_KERNEL); |
| if (!rproc->ops) { |
| kfree(p); |
| kfree(rproc); |
| return NULL; |
| } |
| |
| rproc->firmware = p; |
| rproc->name = name; |
| rproc->priv = &rproc[1]; |
| rproc->auto_boot = true; |
| |
| device_initialize(&rproc->dev); |
| rproc->dev.parent = dev; |
| rproc->dev.type = &rproc_type; |
| rproc->dev.class = &rproc_class; |
| rproc->dev.driver_data = rproc; |
| |
| /* Assign a unique device index and name */ |
| rproc->index = ida_simple_get(&rproc_dev_index, 0, 0, GFP_KERNEL); |
| if (rproc->index < 0) { |
| dev_err(dev, "ida_simple_get failed: %d\n", rproc->index); |
| put_device(&rproc->dev); |
| return NULL; |
| } |
| |
| dev_set_name(&rproc->dev, "remoteproc%d", rproc->index); |
| |
| atomic_set(&rproc->power, 0); |
| |
| /* Default to ELF loader if no load function is specified */ |
| if (!rproc->ops->load) { |
| rproc->ops->load = rproc_elf_load_segments; |
| rproc->ops->parse_fw = rproc_elf_load_rsc_table; |
| rproc->ops->find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table; |
| rproc->ops->sanity_check = rproc_elf_sanity_check; |
| rproc->ops->get_boot_addr = rproc_elf_get_boot_addr; |
| } |
| |
| mutex_init(&rproc->lock); |
| |
| idr_init(&rproc->notifyids); |
| |
| INIT_LIST_HEAD(&rproc->carveouts); |
| INIT_LIST_HEAD(&rproc->mappings); |
| INIT_LIST_HEAD(&rproc->traces); |
| INIT_LIST_HEAD(&rproc->rvdevs); |
| INIT_LIST_HEAD(&rproc->subdevs); |
| INIT_LIST_HEAD(&rproc->dump_segments); |
| |
| INIT_WORK(&rproc->crash_handler, rproc_crash_handler_work); |
| |
| rproc->state = RPROC_OFFLINE; |
| |
| return rproc; |
| } |
| EXPORT_SYMBOL(rproc_alloc); |
| |
| /** |
| * rproc_free() - unroll rproc_alloc() |
| * @rproc: the remote processor handle |
| * |
| * This function decrements the rproc dev refcount. |
| * |
| * If no one holds any reference to rproc anymore, then its refcount would |
| * now drop to zero, and it would be freed. |
| */ |
| void rproc_free(struct rproc *rproc) |
| { |
| put_device(&rproc->dev); |
| } |
| EXPORT_SYMBOL(rproc_free); |
| |
| /** |
| * rproc_put() - release rproc reference |
| * @rproc: the remote processor handle |
| * |
| * This function decrements the rproc dev refcount. |
| * |
| * If no one holds any reference to rproc anymore, then its refcount would |
| * now drop to zero, and it would be freed. |
| */ |
| void rproc_put(struct rproc *rproc) |
| { |
| module_put(rproc->dev.parent->driver->owner); |
| put_device(&rproc->dev); |
| } |
| EXPORT_SYMBOL(rproc_put); |
| |
| /** |
| * rproc_del() - unregister a remote processor |
| * @rproc: rproc handle to unregister |
| * |
| * This function should be called when the platform specific rproc |
| * implementation decides to remove the rproc device. it should |
| * _only_ be called if a previous invocation of rproc_add() |
| * has completed successfully. |
| * |
| * After rproc_del() returns, @rproc isn't freed yet, because |
| * of the outstanding reference created by rproc_alloc. To decrement that |
| * one last refcount, one still needs to call rproc_free(). |
| * |
| * Returns 0 on success and -EINVAL if @rproc isn't valid. |
| */ |
| int rproc_del(struct rproc *rproc) |
| { |
| if (!rproc) |
| return -EINVAL; |
| |
| /* if rproc is marked always-on, rproc_add() booted it */ |
| /* TODO: make sure this works with rproc->power > 1 */ |
| if (rproc->auto_boot) |
| rproc_shutdown(rproc); |
| |
| mutex_lock(&rproc->lock); |
| rproc->state = RPROC_DELETED; |
| mutex_unlock(&rproc->lock); |
| |
| rproc_delete_debug_dir(rproc); |
| |
| /* the rproc is downref'ed as soon as it's removed from the klist */ |
| mutex_lock(&rproc_list_mutex); |
| list_del(&rproc->node); |
| mutex_unlock(&rproc_list_mutex); |
| |
| device_del(&rproc->dev); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(rproc_del); |
| |
| /** |
| * rproc_add_subdev() - add a subdevice to a remoteproc |
| * @rproc: rproc handle to add the subdevice to |
| * @subdev: subdev handle to register |
| * |
| * Caller is responsible for populating optional subdevice function pointers. |
| */ |
| void rproc_add_subdev(struct rproc *rproc, struct rproc_subdev *subdev) |
| { |
| list_add_tail(&subdev->node, &rproc->subdevs); |
| } |
| EXPORT_SYMBOL(rproc_add_subdev); |
| |
| /** |
| * rproc_remove_subdev() - remove a subdevice from a remoteproc |
| * @rproc: rproc handle to remove the subdevice from |
| * @subdev: subdev handle, previously registered with rproc_add_subdev() |
| */ |
| void rproc_remove_subdev(struct rproc *rproc, struct rproc_subdev *subdev) |
| { |
| list_del(&subdev->node); |
| } |
| EXPORT_SYMBOL(rproc_remove_subdev); |
| |
| /** |
| * rproc_get_by_child() - acquire rproc handle of @dev's ancestor |
| * @dev: child device to find ancestor of |
| * |
| * Returns the ancestor rproc instance, or NULL if not found. |
| */ |
| struct rproc *rproc_get_by_child(struct device *dev) |
| { |
| for (dev = dev->parent; dev; dev = dev->parent) { |
| if (dev->type == &rproc_type) |
| return dev->driver_data; |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(rproc_get_by_child); |
| |
| /** |
| * rproc_report_crash() - rproc crash reporter function |
| * @rproc: remote processor |
| * @type: crash type |
| * |
| * This function must be called every time a crash is detected by the low-level |
| * drivers implementing a specific remoteproc. This should not be called from a |
| * non-remoteproc driver. |
| * |
| * This function can be called from atomic/interrupt context. |
| */ |
| void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type) |
| { |
| if (!rproc) { |
| pr_err("NULL rproc pointer\n"); |
| return; |
| } |
| |
| dev_err(&rproc->dev, "crash detected in %s: type %s\n", |
| rproc->name, rproc_crash_to_string(type)); |
| |
| /* create a new task to handle the error */ |
| schedule_work(&rproc->crash_handler); |
| } |
| EXPORT_SYMBOL(rproc_report_crash); |
| |
| static int __init remoteproc_init(void) |
| { |
| rproc_init_sysfs(); |
| rproc_init_debugfs(); |
| |
| return 0; |
| } |
| module_init(remoteproc_init); |
| |
| static void __exit remoteproc_exit(void) |
| { |
| ida_destroy(&rproc_dev_index); |
| |
| rproc_exit_debugfs(); |
| rproc_exit_sysfs(); |
| } |
| module_exit(remoteproc_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("Generic Remote Processor Framework"); |