| // SPDX-License-Identifier: GPL-2.0 |
| // SPI driven IR LED device driver |
| // |
| // Copyright (c) 2016 Samsung Electronics Co., Ltd. |
| // Copyright (c) Andi Shyti <andi.shyti@samsung.com> |
| |
| #include <linux/delay.h> |
| #include <linux/fs.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/of_gpio.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/spi/spi.h> |
| #include <media/rc-core.h> |
| |
| #define IR_SPI_DRIVER_NAME "ir-spi" |
| |
| /* pulse value for different duty cycles */ |
| #define IR_SPI_PULSE_DC_50 0xff00 |
| #define IR_SPI_PULSE_DC_60 0xfc00 |
| #define IR_SPI_PULSE_DC_70 0xf800 |
| #define IR_SPI_PULSE_DC_75 0xf000 |
| #define IR_SPI_PULSE_DC_80 0xc000 |
| #define IR_SPI_PULSE_DC_90 0x8000 |
| |
| #define IR_SPI_DEFAULT_FREQUENCY 38000 |
| #define IR_SPI_BIT_PER_WORD 8 |
| #define IR_SPI_MAX_BUFSIZE 4096 |
| |
| struct ir_spi_data { |
| u32 freq; |
| u8 duty_cycle; |
| bool negated; |
| |
| u16 tx_buf[IR_SPI_MAX_BUFSIZE]; |
| u16 pulse; |
| u16 space; |
| |
| struct rc_dev *rc; |
| struct spi_device *spi; |
| struct regulator *regulator; |
| }; |
| |
| static int ir_spi_tx(struct rc_dev *dev, |
| unsigned int *buffer, unsigned int count) |
| { |
| int i; |
| int ret; |
| unsigned int len = 0; |
| struct ir_spi_data *idata = dev->priv; |
| struct spi_transfer xfer; |
| |
| /* convert the pulse/space signal to raw binary signal */ |
| for (i = 0; i < count; i++) { |
| unsigned int periods; |
| int j; |
| u16 val; |
| |
| periods = DIV_ROUND_CLOSEST(buffer[i] * idata->freq, 1000000); |
| |
| if (len + periods >= IR_SPI_MAX_BUFSIZE) |
| return -EINVAL; |
| |
| /* |
| * the first value in buffer is a pulse, so that 0, 2, 4, ... |
| * contain a pulse duration. On the contrary, 1, 3, 5, ... |
| * contain a space duration. |
| */ |
| val = (i % 2) ? idata->space : idata->pulse; |
| for (j = 0; j < periods; j++) |
| idata->tx_buf[len++] = val; |
| } |
| |
| memset(&xfer, 0, sizeof(xfer)); |
| |
| xfer.speed_hz = idata->freq * 16; |
| xfer.len = len * sizeof(*idata->tx_buf); |
| xfer.tx_buf = idata->tx_buf; |
| |
| ret = regulator_enable(idata->regulator); |
| if (ret) |
| return ret; |
| |
| ret = spi_sync_transfer(idata->spi, &xfer, 1); |
| if (ret) |
| dev_err(&idata->spi->dev, "unable to deliver the signal\n"); |
| |
| regulator_disable(idata->regulator); |
| |
| return ret ? ret : count; |
| } |
| |
| static int ir_spi_set_tx_carrier(struct rc_dev *dev, u32 carrier) |
| { |
| struct ir_spi_data *idata = dev->priv; |
| |
| if (!carrier) |
| return -EINVAL; |
| |
| idata->freq = carrier; |
| |
| return 0; |
| } |
| |
| static int ir_spi_set_duty_cycle(struct rc_dev *dev, u32 duty_cycle) |
| { |
| struct ir_spi_data *idata = dev->priv; |
| |
| if (duty_cycle >= 90) |
| idata->pulse = IR_SPI_PULSE_DC_90; |
| else if (duty_cycle >= 80) |
| idata->pulse = IR_SPI_PULSE_DC_80; |
| else if (duty_cycle >= 75) |
| idata->pulse = IR_SPI_PULSE_DC_75; |
| else if (duty_cycle >= 70) |
| idata->pulse = IR_SPI_PULSE_DC_70; |
| else if (duty_cycle >= 60) |
| idata->pulse = IR_SPI_PULSE_DC_60; |
| else |
| idata->pulse = IR_SPI_PULSE_DC_50; |
| |
| if (idata->negated) { |
| idata->pulse = ~idata->pulse; |
| idata->space = 0xffff; |
| } else { |
| idata->space = 0; |
| } |
| |
| return 0; |
| } |
| |
| static int ir_spi_probe(struct spi_device *spi) |
| { |
| int ret; |
| u8 dc; |
| struct ir_spi_data *idata; |
| |
| idata = devm_kzalloc(&spi->dev, sizeof(*idata), GFP_KERNEL); |
| if (!idata) |
| return -ENOMEM; |
| |
| idata->regulator = devm_regulator_get(&spi->dev, "irda_regulator"); |
| if (IS_ERR(idata->regulator)) |
| return PTR_ERR(idata->regulator); |
| |
| idata->rc = devm_rc_allocate_device(&spi->dev, RC_DRIVER_IR_RAW_TX); |
| if (!idata->rc) |
| return -ENOMEM; |
| |
| idata->rc->tx_ir = ir_spi_tx; |
| idata->rc->s_tx_carrier = ir_spi_set_tx_carrier; |
| idata->rc->s_tx_duty_cycle = ir_spi_set_duty_cycle; |
| idata->rc->device_name = "IR SPI"; |
| idata->rc->driver_name = IR_SPI_DRIVER_NAME; |
| idata->rc->priv = idata; |
| idata->spi = spi; |
| |
| idata->negated = of_property_read_bool(spi->dev.of_node, |
| "led-active-low"); |
| ret = of_property_read_u8(spi->dev.of_node, "duty-cycle", &dc); |
| if (ret) |
| dc = 50; |
| |
| /* ir_spi_set_duty_cycle cannot fail, |
| * it returns int to be compatible with the |
| * rc->s_tx_duty_cycle function |
| */ |
| ir_spi_set_duty_cycle(idata->rc, dc); |
| |
| idata->freq = IR_SPI_DEFAULT_FREQUENCY; |
| |
| return devm_rc_register_device(&spi->dev, idata->rc); |
| } |
| |
| static int ir_spi_remove(struct spi_device *spi) |
| { |
| return 0; |
| } |
| |
| static const struct of_device_id ir_spi_of_match[] = { |
| { .compatible = "ir-spi-led" }, |
| {}, |
| }; |
| |
| static struct spi_driver ir_spi_driver = { |
| .probe = ir_spi_probe, |
| .remove = ir_spi_remove, |
| .driver = { |
| .name = IR_SPI_DRIVER_NAME, |
| .of_match_table = ir_spi_of_match, |
| }, |
| }; |
| |
| module_spi_driver(ir_spi_driver); |
| |
| MODULE_AUTHOR("Andi Shyti <andi.shyti@samsung.com>"); |
| MODULE_DESCRIPTION("SPI IR LED"); |
| MODULE_LICENSE("GPL v2"); |