| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Actions Semi Owl SoCs Ethernet MAC driver |
| * |
| * Copyright (c) 2012 Actions Semi Inc. |
| * Copyright (c) 2021 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> |
| */ |
| |
| #include <linux/circ_buf.h> |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/etherdevice.h> |
| #include <linux/of_mdio.h> |
| #include <linux/of_net.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| #include <linux/reset.h> |
| |
| #include "owl-emac.h" |
| |
| #define OWL_EMAC_DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | \ |
| NETIF_MSG_PROBE | \ |
| NETIF_MSG_LINK) |
| |
| static u32 owl_emac_reg_read(struct owl_emac_priv *priv, u32 reg) |
| { |
| return readl(priv->base + reg); |
| } |
| |
| static void owl_emac_reg_write(struct owl_emac_priv *priv, u32 reg, u32 data) |
| { |
| writel(data, priv->base + reg); |
| } |
| |
| static u32 owl_emac_reg_update(struct owl_emac_priv *priv, |
| u32 reg, u32 mask, u32 val) |
| { |
| u32 data, old_val; |
| |
| data = owl_emac_reg_read(priv, reg); |
| old_val = data & mask; |
| |
| data &= ~mask; |
| data |= val & mask; |
| |
| owl_emac_reg_write(priv, reg, data); |
| |
| return old_val; |
| } |
| |
| static void owl_emac_reg_set(struct owl_emac_priv *priv, u32 reg, u32 bits) |
| { |
| owl_emac_reg_update(priv, reg, bits, bits); |
| } |
| |
| static void owl_emac_reg_clear(struct owl_emac_priv *priv, u32 reg, u32 bits) |
| { |
| owl_emac_reg_update(priv, reg, bits, 0); |
| } |
| |
| static struct device *owl_emac_get_dev(struct owl_emac_priv *priv) |
| { |
| return priv->netdev->dev.parent; |
| } |
| |
| static void owl_emac_irq_enable(struct owl_emac_priv *priv) |
| { |
| /* Enable all interrupts except TU. |
| * |
| * Note the NIE and AIE bits shall also be set in order to actually |
| * enable the selected interrupts. |
| */ |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR7, |
| OWL_EMAC_BIT_MAC_CSR7_NIE | |
| OWL_EMAC_BIT_MAC_CSR7_AIE | |
| OWL_EMAC_BIT_MAC_CSR7_ALL_NOT_TUE); |
| } |
| |
| static void owl_emac_irq_disable(struct owl_emac_priv *priv) |
| { |
| /* Disable all interrupts. |
| * |
| * WARNING: Unset only the NIE and AIE bits in CSR7 to workaround an |
| * unexpected side effect (MAC hardware bug?!) where some bits in the |
| * status register (CSR5) are cleared automatically before being able |
| * to read them via owl_emac_irq_clear(). |
| */ |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR7, |
| OWL_EMAC_BIT_MAC_CSR7_ALL_NOT_TUE); |
| } |
| |
| static u32 owl_emac_irq_status(struct owl_emac_priv *priv) |
| { |
| return owl_emac_reg_read(priv, OWL_EMAC_REG_MAC_CSR5); |
| } |
| |
| static u32 owl_emac_irq_clear(struct owl_emac_priv *priv) |
| { |
| u32 val = owl_emac_irq_status(priv); |
| |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR5, val); |
| |
| return val; |
| } |
| |
| static dma_addr_t owl_emac_dma_map_rx(struct owl_emac_priv *priv, |
| struct sk_buff *skb) |
| { |
| struct device *dev = owl_emac_get_dev(priv); |
| |
| /* Buffer pointer for the RX DMA descriptor must be word aligned. */ |
| return dma_map_single(dev, skb_tail_pointer(skb), |
| skb_tailroom(skb), DMA_FROM_DEVICE); |
| } |
| |
| static void owl_emac_dma_unmap_rx(struct owl_emac_priv *priv, |
| struct sk_buff *skb, dma_addr_t dma_addr) |
| { |
| struct device *dev = owl_emac_get_dev(priv); |
| |
| dma_unmap_single(dev, dma_addr, skb_tailroom(skb), DMA_FROM_DEVICE); |
| } |
| |
| static dma_addr_t owl_emac_dma_map_tx(struct owl_emac_priv *priv, |
| struct sk_buff *skb) |
| { |
| struct device *dev = owl_emac_get_dev(priv); |
| |
| return dma_map_single(dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE); |
| } |
| |
| static void owl_emac_dma_unmap_tx(struct owl_emac_priv *priv, |
| struct sk_buff *skb, dma_addr_t dma_addr) |
| { |
| struct device *dev = owl_emac_get_dev(priv); |
| |
| dma_unmap_single(dev, dma_addr, skb_headlen(skb), DMA_TO_DEVICE); |
| } |
| |
| static unsigned int owl_emac_ring_num_unused(struct owl_emac_ring *ring) |
| { |
| return CIRC_SPACE(ring->head, ring->tail, ring->size); |
| } |
| |
| static unsigned int owl_emac_ring_get_next(struct owl_emac_ring *ring, |
| unsigned int cur) |
| { |
| return (cur + 1) & (ring->size - 1); |
| } |
| |
| static void owl_emac_ring_push_head(struct owl_emac_ring *ring) |
| { |
| ring->head = owl_emac_ring_get_next(ring, ring->head); |
| } |
| |
| static void owl_emac_ring_pop_tail(struct owl_emac_ring *ring) |
| { |
| ring->tail = owl_emac_ring_get_next(ring, ring->tail); |
| } |
| |
| static struct sk_buff *owl_emac_alloc_skb(struct net_device *netdev) |
| { |
| struct sk_buff *skb; |
| int offset; |
| |
| skb = netdev_alloc_skb(netdev, OWL_EMAC_RX_FRAME_MAX_LEN + |
| OWL_EMAC_SKB_RESERVE); |
| if (unlikely(!skb)) |
| return NULL; |
| |
| /* Ensure 4 bytes DMA alignment. */ |
| offset = ((uintptr_t)skb->data) & (OWL_EMAC_SKB_ALIGN - 1); |
| if (unlikely(offset)) |
| skb_reserve(skb, OWL_EMAC_SKB_ALIGN - offset); |
| |
| return skb; |
| } |
| |
| static int owl_emac_ring_prepare_rx(struct owl_emac_priv *priv) |
| { |
| struct owl_emac_ring *ring = &priv->rx_ring; |
| struct device *dev = owl_emac_get_dev(priv); |
| struct net_device *netdev = priv->netdev; |
| struct owl_emac_ring_desc *desc; |
| struct sk_buff *skb; |
| dma_addr_t dma_addr; |
| int i; |
| |
| for (i = 0; i < ring->size; i++) { |
| skb = owl_emac_alloc_skb(netdev); |
| if (!skb) |
| return -ENOMEM; |
| |
| dma_addr = owl_emac_dma_map_rx(priv, skb); |
| if (dma_mapping_error(dev, dma_addr)) { |
| dev_kfree_skb(skb); |
| return -ENOMEM; |
| } |
| |
| desc = &ring->descs[i]; |
| desc->status = OWL_EMAC_BIT_RDES0_OWN; |
| desc->control = skb_tailroom(skb) & OWL_EMAC_MSK_RDES1_RBS1; |
| desc->buf_addr = dma_addr; |
| desc->reserved = 0; |
| |
| ring->skbs[i] = skb; |
| ring->skbs_dma[i] = dma_addr; |
| } |
| |
| desc->control |= OWL_EMAC_BIT_RDES1_RER; |
| |
| ring->head = 0; |
| ring->tail = 0; |
| |
| return 0; |
| } |
| |
| static void owl_emac_ring_prepare_tx(struct owl_emac_priv *priv) |
| { |
| struct owl_emac_ring *ring = &priv->tx_ring; |
| struct owl_emac_ring_desc *desc; |
| int i; |
| |
| for (i = 0; i < ring->size; i++) { |
| desc = &ring->descs[i]; |
| |
| desc->status = 0; |
| desc->control = OWL_EMAC_BIT_TDES1_IC; |
| desc->buf_addr = 0; |
| desc->reserved = 0; |
| } |
| |
| desc->control |= OWL_EMAC_BIT_TDES1_TER; |
| |
| memset(ring->skbs_dma, 0, sizeof(dma_addr_t) * ring->size); |
| |
| ring->head = 0; |
| ring->tail = 0; |
| } |
| |
| static void owl_emac_ring_unprepare_rx(struct owl_emac_priv *priv) |
| { |
| struct owl_emac_ring *ring = &priv->rx_ring; |
| int i; |
| |
| for (i = 0; i < ring->size; i++) { |
| ring->descs[i].status = 0; |
| |
| if (!ring->skbs_dma[i]) |
| continue; |
| |
| owl_emac_dma_unmap_rx(priv, ring->skbs[i], ring->skbs_dma[i]); |
| ring->skbs_dma[i] = 0; |
| |
| dev_kfree_skb(ring->skbs[i]); |
| ring->skbs[i] = NULL; |
| } |
| } |
| |
| static void owl_emac_ring_unprepare_tx(struct owl_emac_priv *priv) |
| { |
| struct owl_emac_ring *ring = &priv->tx_ring; |
| int i; |
| |
| for (i = 0; i < ring->size; i++) { |
| ring->descs[i].status = 0; |
| |
| if (!ring->skbs_dma[i]) |
| continue; |
| |
| owl_emac_dma_unmap_tx(priv, ring->skbs[i], ring->skbs_dma[i]); |
| ring->skbs_dma[i] = 0; |
| |
| dev_kfree_skb(ring->skbs[i]); |
| ring->skbs[i] = NULL; |
| } |
| } |
| |
| static int owl_emac_ring_alloc(struct device *dev, struct owl_emac_ring *ring, |
| unsigned int size) |
| { |
| ring->descs = dmam_alloc_coherent(dev, |
| sizeof(struct owl_emac_ring_desc) * size, |
| &ring->descs_dma, GFP_KERNEL); |
| if (!ring->descs) |
| return -ENOMEM; |
| |
| ring->skbs = devm_kcalloc(dev, size, sizeof(struct sk_buff *), |
| GFP_KERNEL); |
| if (!ring->skbs) |
| return -ENOMEM; |
| |
| ring->skbs_dma = devm_kcalloc(dev, size, sizeof(dma_addr_t), |
| GFP_KERNEL); |
| if (!ring->skbs_dma) |
| return -ENOMEM; |
| |
| ring->size = size; |
| |
| return 0; |
| } |
| |
| static void owl_emac_dma_cmd_resume_rx(struct owl_emac_priv *priv) |
| { |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR2, |
| OWL_EMAC_VAL_MAC_CSR2_RPD); |
| } |
| |
| static void owl_emac_dma_cmd_resume_tx(struct owl_emac_priv *priv) |
| { |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR1, |
| OWL_EMAC_VAL_MAC_CSR1_TPD); |
| } |
| |
| static u32 owl_emac_dma_cmd_set_tx(struct owl_emac_priv *priv, u32 status) |
| { |
| return owl_emac_reg_update(priv, OWL_EMAC_REG_MAC_CSR6, |
| OWL_EMAC_BIT_MAC_CSR6_ST, status); |
| } |
| |
| static u32 owl_emac_dma_cmd_start_tx(struct owl_emac_priv *priv) |
| { |
| return owl_emac_dma_cmd_set_tx(priv, ~0); |
| } |
| |
| static u32 owl_emac_dma_cmd_set(struct owl_emac_priv *priv, u32 status) |
| { |
| return owl_emac_reg_update(priv, OWL_EMAC_REG_MAC_CSR6, |
| OWL_EMAC_MSK_MAC_CSR6_STSR, status); |
| } |
| |
| static u32 owl_emac_dma_cmd_start(struct owl_emac_priv *priv) |
| { |
| return owl_emac_dma_cmd_set(priv, ~0); |
| } |
| |
| static u32 owl_emac_dma_cmd_stop(struct owl_emac_priv *priv) |
| { |
| return owl_emac_dma_cmd_set(priv, 0); |
| } |
| |
| static void owl_emac_set_hw_mac_addr(struct net_device *netdev) |
| { |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| u8 *mac_addr = netdev->dev_addr; |
| u32 addr_high, addr_low; |
| |
| addr_high = mac_addr[0] << 8 | mac_addr[1]; |
| addr_low = mac_addr[2] << 24 | mac_addr[3] << 16 | |
| mac_addr[4] << 8 | mac_addr[5]; |
| |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR17, addr_high); |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR16, addr_low); |
| } |
| |
| static void owl_emac_update_link_state(struct owl_emac_priv *priv) |
| { |
| u32 val, status; |
| |
| if (priv->pause) { |
| val = OWL_EMAC_BIT_MAC_CSR20_FCE | OWL_EMAC_BIT_MAC_CSR20_TUE; |
| val |= OWL_EMAC_BIT_MAC_CSR20_TPE | OWL_EMAC_BIT_MAC_CSR20_RPE; |
| val |= OWL_EMAC_BIT_MAC_CSR20_BPE; |
| } else { |
| val = 0; |
| } |
| |
| /* Update flow control. */ |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR20, val); |
| |
| val = (priv->speed == SPEED_100) ? OWL_EMAC_VAL_MAC_CSR6_SPEED_100M : |
| OWL_EMAC_VAL_MAC_CSR6_SPEED_10M; |
| val <<= OWL_EMAC_OFF_MAC_CSR6_SPEED; |
| |
| if (priv->duplex == DUPLEX_FULL) |
| val |= OWL_EMAC_BIT_MAC_CSR6_FD; |
| |
| spin_lock_bh(&priv->lock); |
| |
| /* Temporarily stop DMA TX & RX. */ |
| status = owl_emac_dma_cmd_stop(priv); |
| |
| /* Update operation modes. */ |
| owl_emac_reg_update(priv, OWL_EMAC_REG_MAC_CSR6, |
| OWL_EMAC_MSK_MAC_CSR6_SPEED | |
| OWL_EMAC_BIT_MAC_CSR6_FD, val); |
| |
| /* Restore DMA TX & RX status. */ |
| owl_emac_dma_cmd_set(priv, status); |
| |
| spin_unlock_bh(&priv->lock); |
| } |
| |
| static void owl_emac_adjust_link(struct net_device *netdev) |
| { |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| struct phy_device *phydev = netdev->phydev; |
| bool state_changed = false; |
| |
| if (phydev->link) { |
| if (!priv->link) { |
| priv->link = phydev->link; |
| state_changed = true; |
| } |
| |
| if (priv->speed != phydev->speed) { |
| priv->speed = phydev->speed; |
| state_changed = true; |
| } |
| |
| if (priv->duplex != phydev->duplex) { |
| priv->duplex = phydev->duplex; |
| state_changed = true; |
| } |
| |
| if (priv->pause != phydev->pause) { |
| priv->pause = phydev->pause; |
| state_changed = true; |
| } |
| } else { |
| if (priv->link) { |
| priv->link = phydev->link; |
| state_changed = true; |
| } |
| } |
| |
| if (state_changed) { |
| if (phydev->link) |
| owl_emac_update_link_state(priv); |
| |
| if (netif_msg_link(priv)) |
| phy_print_status(phydev); |
| } |
| } |
| |
| static irqreturn_t owl_emac_handle_irq(int irq, void *data) |
| { |
| struct net_device *netdev = data; |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| |
| if (netif_running(netdev)) { |
| owl_emac_irq_disable(priv); |
| napi_schedule(&priv->napi); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void owl_emac_ether_addr_push(u8 **dst, const u8 *src) |
| { |
| u32 *a = (u32 *)(*dst); |
| const u16 *b = (const u16 *)src; |
| |
| a[0] = b[0]; |
| a[1] = b[1]; |
| a[2] = b[2]; |
| |
| *dst += 12; |
| } |
| |
| static void |
| owl_emac_setup_frame_prepare(struct owl_emac_priv *priv, struct sk_buff *skb) |
| { |
| const u8 bcast_addr[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; |
| const u8 *mac_addr = priv->netdev->dev_addr; |
| u8 *frame; |
| int i; |
| |
| skb_put(skb, OWL_EMAC_SETUP_FRAME_LEN); |
| |
| frame = skb->data; |
| memset(frame, 0, skb->len); |
| |
| owl_emac_ether_addr_push(&frame, mac_addr); |
| owl_emac_ether_addr_push(&frame, bcast_addr); |
| |
| /* Fill multicast addresses. */ |
| WARN_ON(priv->mcaddr_list.count >= OWL_EMAC_MAX_MULTICAST_ADDRS); |
| for (i = 0; i < priv->mcaddr_list.count; i++) { |
| mac_addr = priv->mcaddr_list.addrs[i]; |
| owl_emac_ether_addr_push(&frame, mac_addr); |
| } |
| } |
| |
| /* The setup frame is a special descriptor which is used to provide physical |
| * addresses (i.e. mac, broadcast and multicast) to the MAC hardware for |
| * filtering purposes. To be recognized as a setup frame, the TDES1_SET bit |
| * must be set in the TX descriptor control field. |
| */ |
| static int owl_emac_setup_frame_xmit(struct owl_emac_priv *priv) |
| { |
| struct owl_emac_ring *ring = &priv->tx_ring; |
| struct net_device *netdev = priv->netdev; |
| struct owl_emac_ring_desc *desc; |
| struct sk_buff *skb; |
| unsigned int tx_head; |
| u32 status, control; |
| dma_addr_t dma_addr; |
| int ret; |
| |
| skb = owl_emac_alloc_skb(netdev); |
| if (!skb) |
| return -ENOMEM; |
| |
| owl_emac_setup_frame_prepare(priv, skb); |
| |
| dma_addr = owl_emac_dma_map_tx(priv, skb); |
| if (dma_mapping_error(owl_emac_get_dev(priv), dma_addr)) { |
| ret = -ENOMEM; |
| goto err_free_skb; |
| } |
| |
| spin_lock_bh(&priv->lock); |
| |
| tx_head = ring->head; |
| desc = &ring->descs[tx_head]; |
| |
| status = READ_ONCE(desc->status); |
| control = READ_ONCE(desc->control); |
| dma_rmb(); /* Ensure data has been read before used. */ |
| |
| if (unlikely(status & OWL_EMAC_BIT_TDES0_OWN) || |
| !owl_emac_ring_num_unused(ring)) { |
| spin_unlock_bh(&priv->lock); |
| owl_emac_dma_unmap_tx(priv, skb, dma_addr); |
| ret = -EBUSY; |
| goto err_free_skb; |
| } |
| |
| ring->skbs[tx_head] = skb; |
| ring->skbs_dma[tx_head] = dma_addr; |
| |
| control &= OWL_EMAC_BIT_TDES1_IC | OWL_EMAC_BIT_TDES1_TER; /* Maintain bits */ |
| control |= OWL_EMAC_BIT_TDES1_SET; |
| control |= OWL_EMAC_MSK_TDES1_TBS1 & skb->len; |
| |
| WRITE_ONCE(desc->control, control); |
| WRITE_ONCE(desc->buf_addr, dma_addr); |
| dma_wmb(); /* Flush descriptor before changing ownership. */ |
| WRITE_ONCE(desc->status, OWL_EMAC_BIT_TDES0_OWN); |
| |
| owl_emac_ring_push_head(ring); |
| |
| /* Temporarily enable DMA TX. */ |
| status = owl_emac_dma_cmd_start_tx(priv); |
| |
| /* Trigger setup frame processing. */ |
| owl_emac_dma_cmd_resume_tx(priv); |
| |
| /* Restore DMA TX status. */ |
| owl_emac_dma_cmd_set_tx(priv, status); |
| |
| /* Stop regular TX until setup frame is processed. */ |
| netif_stop_queue(netdev); |
| |
| spin_unlock_bh(&priv->lock); |
| |
| return 0; |
| |
| err_free_skb: |
| dev_kfree_skb(skb); |
| return ret; |
| } |
| |
| static netdev_tx_t owl_emac_ndo_start_xmit(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| struct device *dev = owl_emac_get_dev(priv); |
| struct owl_emac_ring *ring = &priv->tx_ring; |
| struct owl_emac_ring_desc *desc; |
| unsigned int tx_head; |
| u32 status, control; |
| dma_addr_t dma_addr; |
| |
| dma_addr = owl_emac_dma_map_tx(priv, skb); |
| if (dma_mapping_error(dev, dma_addr)) { |
| dev_err_ratelimited(&netdev->dev, "TX DMA mapping failed\n"); |
| dev_kfree_skb(skb); |
| netdev->stats.tx_dropped++; |
| return NETDEV_TX_OK; |
| } |
| |
| spin_lock_bh(&priv->lock); |
| |
| tx_head = ring->head; |
| desc = &ring->descs[tx_head]; |
| |
| status = READ_ONCE(desc->status); |
| control = READ_ONCE(desc->control); |
| dma_rmb(); /* Ensure data has been read before used. */ |
| |
| if (!owl_emac_ring_num_unused(ring) || |
| unlikely(status & OWL_EMAC_BIT_TDES0_OWN)) { |
| netif_stop_queue(netdev); |
| spin_unlock_bh(&priv->lock); |
| |
| dev_dbg_ratelimited(&netdev->dev, "TX buffer full, status=0x%08x\n", |
| owl_emac_irq_status(priv)); |
| owl_emac_dma_unmap_tx(priv, skb, dma_addr); |
| netdev->stats.tx_dropped++; |
| return NETDEV_TX_BUSY; |
| } |
| |
| ring->skbs[tx_head] = skb; |
| ring->skbs_dma[tx_head] = dma_addr; |
| |
| control &= OWL_EMAC_BIT_TDES1_IC | OWL_EMAC_BIT_TDES1_TER; /* Maintain bits */ |
| control |= OWL_EMAC_BIT_TDES1_FS | OWL_EMAC_BIT_TDES1_LS; |
| control |= OWL_EMAC_MSK_TDES1_TBS1 & skb->len; |
| |
| WRITE_ONCE(desc->control, control); |
| WRITE_ONCE(desc->buf_addr, dma_addr); |
| dma_wmb(); /* Flush descriptor before changing ownership. */ |
| WRITE_ONCE(desc->status, OWL_EMAC_BIT_TDES0_OWN); |
| |
| owl_emac_dma_cmd_resume_tx(priv); |
| owl_emac_ring_push_head(ring); |
| |
| /* FIXME: The transmission is currently restricted to a single frame |
| * at a time as a workaround for a MAC hardware bug that causes random |
| * freeze of the TX queue processor. |
| */ |
| netif_stop_queue(netdev); |
| |
| spin_unlock_bh(&priv->lock); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static bool owl_emac_tx_complete_tail(struct owl_emac_priv *priv) |
| { |
| struct owl_emac_ring *ring = &priv->tx_ring; |
| struct net_device *netdev = priv->netdev; |
| struct owl_emac_ring_desc *desc; |
| struct sk_buff *skb; |
| unsigned int tx_tail; |
| u32 status; |
| |
| tx_tail = ring->tail; |
| desc = &ring->descs[tx_tail]; |
| |
| status = READ_ONCE(desc->status); |
| dma_rmb(); /* Ensure data has been read before used. */ |
| |
| if (status & OWL_EMAC_BIT_TDES0_OWN) |
| return false; |
| |
| /* Check for errors. */ |
| if (status & OWL_EMAC_BIT_TDES0_ES) { |
| dev_dbg_ratelimited(&netdev->dev, |
| "TX complete error status: 0x%08x\n", |
| status); |
| |
| netdev->stats.tx_errors++; |
| |
| if (status & OWL_EMAC_BIT_TDES0_UF) |
| netdev->stats.tx_fifo_errors++; |
| |
| if (status & OWL_EMAC_BIT_TDES0_EC) |
| netdev->stats.tx_aborted_errors++; |
| |
| if (status & OWL_EMAC_BIT_TDES0_LC) |
| netdev->stats.tx_window_errors++; |
| |
| if (status & OWL_EMAC_BIT_TDES0_NC) |
| netdev->stats.tx_heartbeat_errors++; |
| |
| if (status & OWL_EMAC_BIT_TDES0_LO) |
| netdev->stats.tx_carrier_errors++; |
| } else { |
| netdev->stats.tx_packets++; |
| netdev->stats.tx_bytes += ring->skbs[tx_tail]->len; |
| } |
| |
| /* Some collisions occurred, but pkt has been transmitted. */ |
| if (status & OWL_EMAC_BIT_TDES0_DE) |
| netdev->stats.collisions++; |
| |
| skb = ring->skbs[tx_tail]; |
| owl_emac_dma_unmap_tx(priv, skb, ring->skbs_dma[tx_tail]); |
| dev_kfree_skb(skb); |
| |
| ring->skbs[tx_tail] = NULL; |
| ring->skbs_dma[tx_tail] = 0; |
| |
| owl_emac_ring_pop_tail(ring); |
| |
| if (unlikely(netif_queue_stopped(netdev))) |
| netif_wake_queue(netdev); |
| |
| return true; |
| } |
| |
| static void owl_emac_tx_complete(struct owl_emac_priv *priv) |
| { |
| struct owl_emac_ring *ring = &priv->tx_ring; |
| struct net_device *netdev = priv->netdev; |
| unsigned int tx_next; |
| u32 status; |
| |
| spin_lock(&priv->lock); |
| |
| while (ring->tail != ring->head) { |
| if (!owl_emac_tx_complete_tail(priv)) |
| break; |
| } |
| |
| /* FIXME: This is a workaround for a MAC hardware bug not clearing |
| * (sometimes) the OWN bit for a transmitted frame descriptor. |
| * |
| * At this point, when TX queue is full, the tail descriptor has the |
| * OWN bit set, which normally means the frame has not been processed |
| * or transmitted yet. But if there is at least one descriptor in the |
| * queue having the OWN bit cleared, we can safely assume the tail |
| * frame has been also processed by the MAC hardware. |
| * |
| * If that's the case, let's force the frame completion by manually |
| * clearing the OWN bit. |
| */ |
| if (unlikely(!owl_emac_ring_num_unused(ring))) { |
| tx_next = ring->tail; |
| |
| while ((tx_next = owl_emac_ring_get_next(ring, tx_next)) != ring->head) { |
| status = READ_ONCE(ring->descs[tx_next].status); |
| dma_rmb(); /* Ensure data has been read before used. */ |
| |
| if (status & OWL_EMAC_BIT_TDES0_OWN) |
| continue; |
| |
| netdev_dbg(netdev, "Found uncleared TX desc OWN bit\n"); |
| |
| status = READ_ONCE(ring->descs[ring->tail].status); |
| dma_rmb(); /* Ensure data has been read before used. */ |
| status &= ~OWL_EMAC_BIT_TDES0_OWN; |
| WRITE_ONCE(ring->descs[ring->tail].status, status); |
| |
| owl_emac_tx_complete_tail(priv); |
| break; |
| } |
| } |
| |
| spin_unlock(&priv->lock); |
| } |
| |
| static int owl_emac_rx_process(struct owl_emac_priv *priv, int budget) |
| { |
| struct owl_emac_ring *ring = &priv->rx_ring; |
| struct device *dev = owl_emac_get_dev(priv); |
| struct net_device *netdev = priv->netdev; |
| struct owl_emac_ring_desc *desc; |
| struct sk_buff *curr_skb, *new_skb; |
| dma_addr_t curr_dma, new_dma; |
| unsigned int rx_tail, len; |
| u32 status; |
| int recv = 0; |
| |
| while (recv < budget) { |
| spin_lock(&priv->lock); |
| |
| rx_tail = ring->tail; |
| desc = &ring->descs[rx_tail]; |
| |
| status = READ_ONCE(desc->status); |
| dma_rmb(); /* Ensure data has been read before used. */ |
| |
| if (status & OWL_EMAC_BIT_RDES0_OWN) { |
| spin_unlock(&priv->lock); |
| break; |
| } |
| |
| curr_skb = ring->skbs[rx_tail]; |
| curr_dma = ring->skbs_dma[rx_tail]; |
| owl_emac_ring_pop_tail(ring); |
| |
| spin_unlock(&priv->lock); |
| |
| if (status & (OWL_EMAC_BIT_RDES0_DE | OWL_EMAC_BIT_RDES0_RF | |
| OWL_EMAC_BIT_RDES0_TL | OWL_EMAC_BIT_RDES0_CS | |
| OWL_EMAC_BIT_RDES0_DB | OWL_EMAC_BIT_RDES0_CE | |
| OWL_EMAC_BIT_RDES0_ZERO)) { |
| dev_dbg_ratelimited(&netdev->dev, |
| "RX desc error status: 0x%08x\n", |
| status); |
| |
| if (status & OWL_EMAC_BIT_RDES0_DE) |
| netdev->stats.rx_over_errors++; |
| |
| if (status & (OWL_EMAC_BIT_RDES0_RF | OWL_EMAC_BIT_RDES0_DB)) |
| netdev->stats.rx_frame_errors++; |
| |
| if (status & OWL_EMAC_BIT_RDES0_TL) |
| netdev->stats.rx_length_errors++; |
| |
| if (status & OWL_EMAC_BIT_RDES0_CS) |
| netdev->stats.collisions++; |
| |
| if (status & OWL_EMAC_BIT_RDES0_CE) |
| netdev->stats.rx_crc_errors++; |
| |
| if (status & OWL_EMAC_BIT_RDES0_ZERO) |
| netdev->stats.rx_fifo_errors++; |
| |
| goto drop_skb; |
| } |
| |
| len = (status & OWL_EMAC_MSK_RDES0_FL) >> OWL_EMAC_OFF_RDES0_FL; |
| if (unlikely(len > OWL_EMAC_RX_FRAME_MAX_LEN)) { |
| netdev->stats.rx_length_errors++; |
| netdev_err(netdev, "invalid RX frame len: %u\n", len); |
| goto drop_skb; |
| } |
| |
| /* Prepare new skb before receiving the current one. */ |
| new_skb = owl_emac_alloc_skb(netdev); |
| if (unlikely(!new_skb)) |
| goto drop_skb; |
| |
| new_dma = owl_emac_dma_map_rx(priv, new_skb); |
| if (dma_mapping_error(dev, new_dma)) { |
| dev_kfree_skb(new_skb); |
| netdev_err(netdev, "RX DMA mapping failed\n"); |
| goto drop_skb; |
| } |
| |
| owl_emac_dma_unmap_rx(priv, curr_skb, curr_dma); |
| |
| skb_put(curr_skb, len - ETH_FCS_LEN); |
| curr_skb->ip_summed = CHECKSUM_NONE; |
| curr_skb->protocol = eth_type_trans(curr_skb, netdev); |
| curr_skb->dev = netdev; |
| |
| netif_receive_skb(curr_skb); |
| |
| netdev->stats.rx_packets++; |
| netdev->stats.rx_bytes += len; |
| recv++; |
| goto push_skb; |
| |
| drop_skb: |
| netdev->stats.rx_dropped++; |
| netdev->stats.rx_errors++; |
| /* Reuse the current skb. */ |
| new_skb = curr_skb; |
| new_dma = curr_dma; |
| |
| push_skb: |
| spin_lock(&priv->lock); |
| |
| ring->skbs[ring->head] = new_skb; |
| ring->skbs_dma[ring->head] = new_dma; |
| |
| WRITE_ONCE(desc->buf_addr, new_dma); |
| dma_wmb(); /* Flush descriptor before changing ownership. */ |
| WRITE_ONCE(desc->status, OWL_EMAC_BIT_RDES0_OWN); |
| |
| owl_emac_ring_push_head(ring); |
| |
| spin_unlock(&priv->lock); |
| } |
| |
| return recv; |
| } |
| |
| static int owl_emac_poll(struct napi_struct *napi, int budget) |
| { |
| int work_done = 0, ru_cnt = 0, recv; |
| static int tx_err_cnt, rx_err_cnt; |
| struct owl_emac_priv *priv; |
| u32 status, proc_status; |
| |
| priv = container_of(napi, struct owl_emac_priv, napi); |
| |
| while ((status = owl_emac_irq_clear(priv)) & |
| (OWL_EMAC_BIT_MAC_CSR5_NIS | OWL_EMAC_BIT_MAC_CSR5_AIS)) { |
| recv = 0; |
| |
| /* TX setup frame raises ETI instead of TI. */ |
| if (status & (OWL_EMAC_BIT_MAC_CSR5_TI | OWL_EMAC_BIT_MAC_CSR5_ETI)) { |
| owl_emac_tx_complete(priv); |
| tx_err_cnt = 0; |
| |
| /* Count MAC internal RX errors. */ |
| proc_status = status & OWL_EMAC_MSK_MAC_CSR5_RS; |
| proc_status >>= OWL_EMAC_OFF_MAC_CSR5_RS; |
| if (proc_status == OWL_EMAC_VAL_MAC_CSR5_RS_DATA || |
| proc_status == OWL_EMAC_VAL_MAC_CSR5_RS_CDES || |
| proc_status == OWL_EMAC_VAL_MAC_CSR5_RS_FDES) |
| rx_err_cnt++; |
| } |
| |
| if (status & OWL_EMAC_BIT_MAC_CSR5_RI) { |
| recv = owl_emac_rx_process(priv, budget - work_done); |
| rx_err_cnt = 0; |
| |
| /* Count MAC internal TX errors. */ |
| proc_status = status & OWL_EMAC_MSK_MAC_CSR5_TS; |
| proc_status >>= OWL_EMAC_OFF_MAC_CSR5_TS; |
| if (proc_status == OWL_EMAC_VAL_MAC_CSR5_TS_DATA || |
| proc_status == OWL_EMAC_VAL_MAC_CSR5_TS_CDES) |
| tx_err_cnt++; |
| } else if (status & OWL_EMAC_BIT_MAC_CSR5_RU) { |
| /* MAC AHB is in suspended state, will return to RX |
| * descriptor processing when the host changes ownership |
| * of the descriptor and either an RX poll demand CMD is |
| * issued or a new frame is recognized by the MAC AHB. |
| */ |
| if (++ru_cnt == 2) |
| owl_emac_dma_cmd_resume_rx(priv); |
| |
| recv = owl_emac_rx_process(priv, budget - work_done); |
| |
| /* Guard against too many RU interrupts. */ |
| if (ru_cnt > 3) |
| break; |
| } |
| |
| work_done += recv; |
| if (work_done >= budget) |
| break; |
| } |
| |
| if (work_done < budget) { |
| napi_complete_done(napi, work_done); |
| owl_emac_irq_enable(priv); |
| } |
| |
| /* Reset MAC when getting too many internal TX or RX errors. */ |
| if (tx_err_cnt > 10 || rx_err_cnt > 10) { |
| netdev_dbg(priv->netdev, "%s error status: 0x%08x\n", |
| tx_err_cnt > 10 ? "TX" : "RX", status); |
| rx_err_cnt = 0; |
| tx_err_cnt = 0; |
| schedule_work(&priv->mac_reset_task); |
| } |
| |
| return work_done; |
| } |
| |
| static void owl_emac_mdio_clock_enable(struct owl_emac_priv *priv) |
| { |
| u32 val; |
| |
| /* Enable MDC clock generation by adjusting CLKDIV according to |
| * the vendor implementation of the original driver. |
| */ |
| val = owl_emac_reg_read(priv, OWL_EMAC_REG_MAC_CSR10); |
| val &= OWL_EMAC_MSK_MAC_CSR10_CLKDIV; |
| val |= OWL_EMAC_VAL_MAC_CSR10_CLKDIV_128 << OWL_EMAC_OFF_MAC_CSR10_CLKDIV; |
| |
| val |= OWL_EMAC_BIT_MAC_CSR10_SB; |
| val |= OWL_EMAC_VAL_MAC_CSR10_OPCODE_CDS << OWL_EMAC_OFF_MAC_CSR10_OPCODE; |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR10, val); |
| } |
| |
| static void owl_emac_core_hw_reset(struct owl_emac_priv *priv) |
| { |
| /* Trigger hardware reset. */ |
| reset_control_assert(priv->reset); |
| usleep_range(10, 20); |
| reset_control_deassert(priv->reset); |
| usleep_range(100, 200); |
| } |
| |
| static int owl_emac_core_sw_reset(struct owl_emac_priv *priv) |
| { |
| u32 val; |
| int ret; |
| |
| /* Trigger software reset. */ |
| owl_emac_reg_set(priv, OWL_EMAC_REG_MAC_CSR0, OWL_EMAC_BIT_MAC_CSR0_SWR); |
| ret = readl_poll_timeout(priv->base + OWL_EMAC_REG_MAC_CSR0, |
| val, !(val & OWL_EMAC_BIT_MAC_CSR0_SWR), |
| OWL_EMAC_POLL_DELAY_USEC, |
| OWL_EMAC_RESET_POLL_TIMEOUT_USEC); |
| if (ret) |
| return ret; |
| |
| if (priv->phy_mode == PHY_INTERFACE_MODE_RMII) { |
| /* Enable RMII and use the 50MHz rmii clk as output to PHY. */ |
| val = 0; |
| } else { |
| /* Enable SMII and use the 125MHz rmii clk as output to PHY. |
| * Additionally set SMII SYNC delay to 4 half cycle. |
| */ |
| val = 0x04 << OWL_EMAC_OFF_MAC_CTRL_SSDC; |
| val |= OWL_EMAC_BIT_MAC_CTRL_RSIS; |
| } |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CTRL, val); |
| |
| /* MDC is disabled after reset. */ |
| owl_emac_mdio_clock_enable(priv); |
| |
| /* Set FIFO pause & restart threshold levels. */ |
| val = 0x40 << OWL_EMAC_OFF_MAC_CSR19_FPTL; |
| val |= 0x10 << OWL_EMAC_OFF_MAC_CSR19_FRTL; |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR19, val); |
| |
| /* Set flow control pause quanta time to ~100 ms. */ |
| val = 0x4FFF << OWL_EMAC_OFF_MAC_CSR18_PQT; |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR18, val); |
| |
| /* Setup interrupt mitigation. */ |
| val = 7 << OWL_EMAC_OFF_MAC_CSR11_NRP; |
| val |= 4 << OWL_EMAC_OFF_MAC_CSR11_RT; |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR11, val); |
| |
| /* Set RX/TX rings base addresses. */ |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR3, |
| (u32)(priv->rx_ring.descs_dma)); |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR4, |
| (u32)(priv->tx_ring.descs_dma)); |
| |
| /* Setup initial operation mode. */ |
| val = OWL_EMAC_VAL_MAC_CSR6_SPEED_100M << OWL_EMAC_OFF_MAC_CSR6_SPEED; |
| val |= OWL_EMAC_BIT_MAC_CSR6_FD; |
| owl_emac_reg_update(priv, OWL_EMAC_REG_MAC_CSR6, |
| OWL_EMAC_MSK_MAC_CSR6_SPEED | |
| OWL_EMAC_BIT_MAC_CSR6_FD, val); |
| owl_emac_reg_clear(priv, OWL_EMAC_REG_MAC_CSR6, |
| OWL_EMAC_BIT_MAC_CSR6_PR | OWL_EMAC_BIT_MAC_CSR6_PM); |
| |
| priv->link = 0; |
| priv->speed = SPEED_UNKNOWN; |
| priv->duplex = DUPLEX_UNKNOWN; |
| priv->pause = 0; |
| priv->mcaddr_list.count = 0; |
| |
| return 0; |
| } |
| |
| static int owl_emac_enable(struct net_device *netdev, bool start_phy) |
| { |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| int ret; |
| |
| owl_emac_dma_cmd_stop(priv); |
| owl_emac_irq_disable(priv); |
| owl_emac_irq_clear(priv); |
| |
| owl_emac_ring_prepare_tx(priv); |
| ret = owl_emac_ring_prepare_rx(priv); |
| if (ret) |
| goto err_unprep; |
| |
| ret = owl_emac_core_sw_reset(priv); |
| if (ret) { |
| netdev_err(netdev, "failed to soft reset MAC core: %d\n", ret); |
| goto err_unprep; |
| } |
| |
| owl_emac_set_hw_mac_addr(netdev); |
| owl_emac_setup_frame_xmit(priv); |
| |
| netdev_reset_queue(netdev); |
| napi_enable(&priv->napi); |
| |
| owl_emac_irq_enable(priv); |
| owl_emac_dma_cmd_start(priv); |
| |
| if (start_phy) |
| phy_start(netdev->phydev); |
| |
| netif_start_queue(netdev); |
| |
| return 0; |
| |
| err_unprep: |
| owl_emac_ring_unprepare_rx(priv); |
| owl_emac_ring_unprepare_tx(priv); |
| |
| return ret; |
| } |
| |
| static void owl_emac_disable(struct net_device *netdev, bool stop_phy) |
| { |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| |
| owl_emac_dma_cmd_stop(priv); |
| owl_emac_irq_disable(priv); |
| |
| netif_stop_queue(netdev); |
| napi_disable(&priv->napi); |
| |
| if (stop_phy) |
| phy_stop(netdev->phydev); |
| |
| owl_emac_ring_unprepare_rx(priv); |
| owl_emac_ring_unprepare_tx(priv); |
| } |
| |
| static int owl_emac_ndo_open(struct net_device *netdev) |
| { |
| return owl_emac_enable(netdev, true); |
| } |
| |
| static int owl_emac_ndo_stop(struct net_device *netdev) |
| { |
| owl_emac_disable(netdev, true); |
| |
| return 0; |
| } |
| |
| static void owl_emac_set_multicast(struct net_device *netdev, int count) |
| { |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| struct netdev_hw_addr *ha; |
| int index = 0; |
| |
| if (count <= 0) { |
| priv->mcaddr_list.count = 0; |
| return; |
| } |
| |
| netdev_for_each_mc_addr(ha, netdev) { |
| if (!is_multicast_ether_addr(ha->addr)) |
| continue; |
| |
| WARN_ON(index >= OWL_EMAC_MAX_MULTICAST_ADDRS); |
| ether_addr_copy(priv->mcaddr_list.addrs[index++], ha->addr); |
| } |
| |
| priv->mcaddr_list.count = index; |
| |
| owl_emac_setup_frame_xmit(priv); |
| } |
| |
| static void owl_emac_ndo_set_rx_mode(struct net_device *netdev) |
| { |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| u32 status, val = 0; |
| int mcast_count = 0; |
| |
| if (netdev->flags & IFF_PROMISC) { |
| val = OWL_EMAC_BIT_MAC_CSR6_PR; |
| } else if (netdev->flags & IFF_ALLMULTI) { |
| val = OWL_EMAC_BIT_MAC_CSR6_PM; |
| } else if (netdev->flags & IFF_MULTICAST) { |
| mcast_count = netdev_mc_count(netdev); |
| |
| if (mcast_count > OWL_EMAC_MAX_MULTICAST_ADDRS) { |
| val = OWL_EMAC_BIT_MAC_CSR6_PM; |
| mcast_count = 0; |
| } |
| } |
| |
| spin_lock_bh(&priv->lock); |
| |
| /* Temporarily stop DMA TX & RX. */ |
| status = owl_emac_dma_cmd_stop(priv); |
| |
| /* Update operation modes. */ |
| owl_emac_reg_update(priv, OWL_EMAC_REG_MAC_CSR6, |
| OWL_EMAC_BIT_MAC_CSR6_PR | OWL_EMAC_BIT_MAC_CSR6_PM, |
| val); |
| |
| /* Restore DMA TX & RX status. */ |
| owl_emac_dma_cmd_set(priv, status); |
| |
| spin_unlock_bh(&priv->lock); |
| |
| /* Set/reset multicast addr list. */ |
| owl_emac_set_multicast(netdev, mcast_count); |
| } |
| |
| static int owl_emac_ndo_set_mac_addr(struct net_device *netdev, void *addr) |
| { |
| struct sockaddr *skaddr = addr; |
| |
| if (!is_valid_ether_addr(skaddr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| if (netif_running(netdev)) |
| return -EBUSY; |
| |
| memcpy(netdev->dev_addr, skaddr->sa_data, netdev->addr_len); |
| owl_emac_set_hw_mac_addr(netdev); |
| |
| return owl_emac_setup_frame_xmit(netdev_priv(netdev)); |
| } |
| |
| static int owl_emac_ndo_do_ioctl(struct net_device *netdev, |
| struct ifreq *req, int cmd) |
| { |
| if (!netif_running(netdev)) |
| return -EINVAL; |
| |
| return phy_mii_ioctl(netdev->phydev, req, cmd); |
| } |
| |
| static void owl_emac_ndo_tx_timeout(struct net_device *netdev, |
| unsigned int txqueue) |
| { |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| |
| schedule_work(&priv->mac_reset_task); |
| } |
| |
| static void owl_emac_reset_task(struct work_struct *work) |
| { |
| struct owl_emac_priv *priv; |
| |
| priv = container_of(work, struct owl_emac_priv, mac_reset_task); |
| |
| netdev_dbg(priv->netdev, "resetting MAC\n"); |
| owl_emac_disable(priv->netdev, false); |
| owl_emac_enable(priv->netdev, false); |
| } |
| |
| static struct net_device_stats * |
| owl_emac_ndo_get_stats(struct net_device *netdev) |
| { |
| /* FIXME: If possible, try to get stats from MAC hardware registers |
| * instead of tracking them manually in the driver. |
| */ |
| |
| return &netdev->stats; |
| } |
| |
| static const struct net_device_ops owl_emac_netdev_ops = { |
| .ndo_open = owl_emac_ndo_open, |
| .ndo_stop = owl_emac_ndo_stop, |
| .ndo_start_xmit = owl_emac_ndo_start_xmit, |
| .ndo_set_rx_mode = owl_emac_ndo_set_rx_mode, |
| .ndo_set_mac_address = owl_emac_ndo_set_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_do_ioctl = owl_emac_ndo_do_ioctl, |
| .ndo_tx_timeout = owl_emac_ndo_tx_timeout, |
| .ndo_get_stats = owl_emac_ndo_get_stats, |
| }; |
| |
| static void owl_emac_ethtool_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *info) |
| { |
| strscpy(info->driver, OWL_EMAC_DRVNAME, sizeof(info->driver)); |
| } |
| |
| static u32 owl_emac_ethtool_get_msglevel(struct net_device *netdev) |
| { |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| |
| return priv->msg_enable; |
| } |
| |
| static void owl_emac_ethtool_set_msglevel(struct net_device *ndev, u32 val) |
| { |
| struct owl_emac_priv *priv = netdev_priv(ndev); |
| |
| priv->msg_enable = val; |
| } |
| |
| static const struct ethtool_ops owl_emac_ethtool_ops = { |
| .get_drvinfo = owl_emac_ethtool_get_drvinfo, |
| .get_link = ethtool_op_get_link, |
| .get_link_ksettings = phy_ethtool_get_link_ksettings, |
| .set_link_ksettings = phy_ethtool_set_link_ksettings, |
| .get_msglevel = owl_emac_ethtool_get_msglevel, |
| .set_msglevel = owl_emac_ethtool_set_msglevel, |
| }; |
| |
| static int owl_emac_mdio_wait(struct owl_emac_priv *priv) |
| { |
| u32 val; |
| |
| /* Wait while data transfer is in progress. */ |
| return readl_poll_timeout(priv->base + OWL_EMAC_REG_MAC_CSR10, |
| val, !(val & OWL_EMAC_BIT_MAC_CSR10_SB), |
| OWL_EMAC_POLL_DELAY_USEC, |
| OWL_EMAC_MDIO_POLL_TIMEOUT_USEC); |
| } |
| |
| static int owl_emac_mdio_read(struct mii_bus *bus, int addr, int regnum) |
| { |
| struct owl_emac_priv *priv = bus->priv; |
| u32 data, tmp; |
| int ret; |
| |
| if (regnum & MII_ADDR_C45) |
| return -EOPNOTSUPP; |
| |
| data = OWL_EMAC_BIT_MAC_CSR10_SB; |
| data |= OWL_EMAC_VAL_MAC_CSR10_OPCODE_RD << OWL_EMAC_OFF_MAC_CSR10_OPCODE; |
| |
| tmp = addr << OWL_EMAC_OFF_MAC_CSR10_PHYADD; |
| data |= tmp & OWL_EMAC_MSK_MAC_CSR10_PHYADD; |
| |
| tmp = regnum << OWL_EMAC_OFF_MAC_CSR10_REGADD; |
| data |= tmp & OWL_EMAC_MSK_MAC_CSR10_REGADD; |
| |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR10, data); |
| |
| ret = owl_emac_mdio_wait(priv); |
| if (ret) |
| return ret; |
| |
| data = owl_emac_reg_read(priv, OWL_EMAC_REG_MAC_CSR10); |
| data &= OWL_EMAC_MSK_MAC_CSR10_DATA; |
| |
| return data; |
| } |
| |
| static int |
| owl_emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val) |
| { |
| struct owl_emac_priv *priv = bus->priv; |
| u32 data, tmp; |
| |
| if (regnum & MII_ADDR_C45) |
| return -EOPNOTSUPP; |
| |
| data = OWL_EMAC_BIT_MAC_CSR10_SB; |
| data |= OWL_EMAC_VAL_MAC_CSR10_OPCODE_WR << OWL_EMAC_OFF_MAC_CSR10_OPCODE; |
| |
| tmp = addr << OWL_EMAC_OFF_MAC_CSR10_PHYADD; |
| data |= tmp & OWL_EMAC_MSK_MAC_CSR10_PHYADD; |
| |
| tmp = regnum << OWL_EMAC_OFF_MAC_CSR10_REGADD; |
| data |= tmp & OWL_EMAC_MSK_MAC_CSR10_REGADD; |
| |
| data |= val & OWL_EMAC_MSK_MAC_CSR10_DATA; |
| |
| owl_emac_reg_write(priv, OWL_EMAC_REG_MAC_CSR10, data); |
| |
| return owl_emac_mdio_wait(priv); |
| } |
| |
| static int owl_emac_mdio_init(struct net_device *netdev) |
| { |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| struct device *dev = owl_emac_get_dev(priv); |
| struct device_node *mdio_node; |
| int ret; |
| |
| mdio_node = of_get_child_by_name(dev->of_node, "mdio"); |
| if (!mdio_node) |
| return -ENODEV; |
| |
| if (!of_device_is_available(mdio_node)) { |
| ret = -ENODEV; |
| goto err_put_node; |
| } |
| |
| priv->mii = devm_mdiobus_alloc(dev); |
| if (!priv->mii) { |
| ret = -ENOMEM; |
| goto err_put_node; |
| } |
| |
| snprintf(priv->mii->id, MII_BUS_ID_SIZE, "%s", dev_name(dev)); |
| priv->mii->name = "owl-emac-mdio"; |
| priv->mii->parent = dev; |
| priv->mii->read = owl_emac_mdio_read; |
| priv->mii->write = owl_emac_mdio_write; |
| priv->mii->phy_mask = ~0; /* Mask out all PHYs from auto probing. */ |
| priv->mii->priv = priv; |
| |
| ret = devm_of_mdiobus_register(dev, priv->mii, mdio_node); |
| |
| err_put_node: |
| of_node_put(mdio_node); |
| return ret; |
| } |
| |
| static int owl_emac_phy_init(struct net_device *netdev) |
| { |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| struct device *dev = owl_emac_get_dev(priv); |
| struct phy_device *phy; |
| |
| phy = of_phy_get_and_connect(netdev, dev->of_node, |
| owl_emac_adjust_link); |
| if (!phy) |
| return -ENODEV; |
| |
| phy_set_sym_pause(phy, true, true, true); |
| |
| if (netif_msg_link(priv)) |
| phy_attached_info(phy); |
| |
| return 0; |
| } |
| |
| static void owl_emac_get_mac_addr(struct net_device *netdev) |
| { |
| struct device *dev = netdev->dev.parent; |
| int ret; |
| |
| ret = eth_platform_get_mac_address(dev, netdev->dev_addr); |
| if (!ret && is_valid_ether_addr(netdev->dev_addr)) |
| return; |
| |
| eth_hw_addr_random(netdev); |
| dev_warn(dev, "using random MAC address %pM\n", netdev->dev_addr); |
| } |
| |
| static __maybe_unused int owl_emac_suspend(struct device *dev) |
| { |
| struct net_device *netdev = dev_get_drvdata(dev); |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| |
| disable_irq(netdev->irq); |
| |
| if (netif_running(netdev)) { |
| owl_emac_disable(netdev, true); |
| netif_device_detach(netdev); |
| } |
| |
| clk_bulk_disable_unprepare(OWL_EMAC_NCLKS, priv->clks); |
| |
| return 0; |
| } |
| |
| static __maybe_unused int owl_emac_resume(struct device *dev) |
| { |
| struct net_device *netdev = dev_get_drvdata(dev); |
| struct owl_emac_priv *priv = netdev_priv(netdev); |
| int ret; |
| |
| ret = clk_bulk_prepare_enable(OWL_EMAC_NCLKS, priv->clks); |
| if (ret) |
| return ret; |
| |
| if (netif_running(netdev)) { |
| owl_emac_core_hw_reset(priv); |
| owl_emac_core_sw_reset(priv); |
| |
| ret = owl_emac_enable(netdev, true); |
| if (ret) { |
| clk_bulk_disable_unprepare(OWL_EMAC_NCLKS, priv->clks); |
| return ret; |
| } |
| |
| netif_device_attach(netdev); |
| } |
| |
| enable_irq(netdev->irq); |
| |
| return 0; |
| } |
| |
| static void owl_emac_clk_disable_unprepare(void *data) |
| { |
| struct owl_emac_priv *priv = data; |
| |
| clk_bulk_disable_unprepare(OWL_EMAC_NCLKS, priv->clks); |
| } |
| |
| static int owl_emac_clk_set_rate(struct owl_emac_priv *priv) |
| { |
| struct device *dev = owl_emac_get_dev(priv); |
| unsigned long rate; |
| int ret; |
| |
| switch (priv->phy_mode) { |
| case PHY_INTERFACE_MODE_RMII: |
| rate = 50000000; |
| break; |
| |
| case PHY_INTERFACE_MODE_SMII: |
| rate = 125000000; |
| break; |
| |
| default: |
| dev_err(dev, "unsupported phy interface mode %d\n", |
| priv->phy_mode); |
| return -EOPNOTSUPP; |
| } |
| |
| ret = clk_set_rate(priv->clks[OWL_EMAC_CLK_RMII].clk, rate); |
| if (ret) |
| dev_err(dev, "failed to set RMII clock rate: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int owl_emac_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct net_device *netdev; |
| struct owl_emac_priv *priv; |
| int ret, i; |
| |
| netdev = devm_alloc_etherdev(dev, sizeof(*priv)); |
| if (!netdev) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, netdev); |
| SET_NETDEV_DEV(netdev, dev); |
| |
| priv = netdev_priv(netdev); |
| priv->netdev = netdev; |
| priv->msg_enable = netif_msg_init(-1, OWL_EMAC_DEFAULT_MSG_ENABLE); |
| |
| ret = of_get_phy_mode(dev->of_node, &priv->phy_mode); |
| if (ret) { |
| dev_err(dev, "failed to get phy mode: %d\n", ret); |
| return ret; |
| } |
| |
| spin_lock_init(&priv->lock); |
| |
| ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); |
| if (ret) { |
| dev_err(dev, "unsupported DMA mask\n"); |
| return ret; |
| } |
| |
| ret = owl_emac_ring_alloc(dev, &priv->rx_ring, OWL_EMAC_RX_RING_SIZE); |
| if (ret) |
| return ret; |
| |
| ret = owl_emac_ring_alloc(dev, &priv->tx_ring, OWL_EMAC_TX_RING_SIZE); |
| if (ret) |
| return ret; |
| |
| priv->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(priv->base)) |
| return PTR_ERR(priv->base); |
| |
| netdev->irq = platform_get_irq(pdev, 0); |
| if (netdev->irq < 0) |
| return netdev->irq; |
| |
| ret = devm_request_irq(dev, netdev->irq, owl_emac_handle_irq, |
| IRQF_SHARED, netdev->name, netdev); |
| if (ret) { |
| dev_err(dev, "failed to request irq: %d\n", netdev->irq); |
| return ret; |
| } |
| |
| for (i = 0; i < OWL_EMAC_NCLKS; i++) |
| priv->clks[i].id = owl_emac_clk_names[i]; |
| |
| ret = devm_clk_bulk_get(dev, OWL_EMAC_NCLKS, priv->clks); |
| if (ret) |
| return ret; |
| |
| ret = clk_bulk_prepare_enable(OWL_EMAC_NCLKS, priv->clks); |
| if (ret) |
| return ret; |
| |
| ret = devm_add_action_or_reset(dev, owl_emac_clk_disable_unprepare, priv); |
| if (ret) |
| return ret; |
| |
| ret = owl_emac_clk_set_rate(priv); |
| if (ret) |
| return ret; |
| |
| priv->reset = devm_reset_control_get_exclusive(dev, NULL); |
| if (IS_ERR(priv->reset)) |
| return dev_err_probe(dev, PTR_ERR(priv->reset), |
| "failed to get reset control"); |
| |
| owl_emac_get_mac_addr(netdev); |
| |
| owl_emac_core_hw_reset(priv); |
| owl_emac_mdio_clock_enable(priv); |
| |
| ret = owl_emac_mdio_init(netdev); |
| if (ret) { |
| dev_err(dev, "failed to initialize MDIO bus\n"); |
| return ret; |
| } |
| |
| ret = owl_emac_phy_init(netdev); |
| if (ret) { |
| dev_err(dev, "failed to initialize PHY\n"); |
| return ret; |
| } |
| |
| INIT_WORK(&priv->mac_reset_task, owl_emac_reset_task); |
| |
| netdev->min_mtu = OWL_EMAC_MTU_MIN; |
| netdev->max_mtu = OWL_EMAC_MTU_MAX; |
| netdev->watchdog_timeo = OWL_EMAC_TX_TIMEOUT; |
| netdev->netdev_ops = &owl_emac_netdev_ops; |
| netdev->ethtool_ops = &owl_emac_ethtool_ops; |
| netif_napi_add(netdev, &priv->napi, owl_emac_poll, NAPI_POLL_WEIGHT); |
| |
| ret = devm_register_netdev(dev, netdev); |
| if (ret) { |
| netif_napi_del(&priv->napi); |
| phy_disconnect(netdev->phydev); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int owl_emac_remove(struct platform_device *pdev) |
| { |
| struct owl_emac_priv *priv = platform_get_drvdata(pdev); |
| |
| netif_napi_del(&priv->napi); |
| phy_disconnect(priv->netdev->phydev); |
| cancel_work_sync(&priv->mac_reset_task); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id owl_emac_of_match[] = { |
| { .compatible = "actions,owl-emac", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, owl_emac_of_match); |
| |
| static SIMPLE_DEV_PM_OPS(owl_emac_pm_ops, |
| owl_emac_suspend, owl_emac_resume); |
| |
| static struct platform_driver owl_emac_driver = { |
| .driver = { |
| .name = OWL_EMAC_DRVNAME, |
| .of_match_table = owl_emac_of_match, |
| .pm = &owl_emac_pm_ops, |
| }, |
| .probe = owl_emac_probe, |
| .remove = owl_emac_remove, |
| }; |
| module_platform_driver(owl_emac_driver); |
| |
| MODULE_DESCRIPTION("Actions Semi Owl SoCs Ethernet MAC Driver"); |
| MODULE_AUTHOR("Actions Semi Inc."); |
| MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>"); |
| MODULE_LICENSE("GPL"); |