| // SPDX-License-Identifier: GPL-2.0+ |
| /* Microchip Sparx5 Switch driver |
| * |
| * Copyright (c) 2021 Microchip Technology Inc. and its subsidiaries. |
| */ |
| |
| #include "sparx5_main_regs.h" |
| #include "sparx5_main.h" |
| #include "sparx5_port.h" |
| |
| /* The IFH bit position of the first VSTAX bit. This is because the |
| * VSTAX bit positions in Data sheet is starting from zero. |
| */ |
| #define VSTAX 73 |
| |
| static void ifh_encode_bitfield(void *ifh, u64 value, u32 pos, u32 width) |
| { |
| u8 *ifh_hdr = ifh; |
| /* Calculate the Start IFH byte position of this IFH bit position */ |
| u32 byte = (35 - (pos / 8)); |
| /* Calculate the Start bit position in the Start IFH byte */ |
| u32 bit = (pos % 8); |
| u64 encode = GENMASK(bit + width - 1, bit) & (value << bit); |
| |
| /* Max width is 5 bytes - 40 bits. In worst case this will |
| * spread over 6 bytes - 48 bits |
| */ |
| compiletime_assert(width <= 40, "Unsupported width, must be <= 40"); |
| |
| /* The b0-b7 goes into the start IFH byte */ |
| if (encode & 0xFF) |
| ifh_hdr[byte] |= (u8)((encode & 0xFF)); |
| /* The b8-b15 goes into the next IFH byte */ |
| if (encode & 0xFF00) |
| ifh_hdr[byte - 1] |= (u8)((encode & 0xFF00) >> 8); |
| /* The b16-b23 goes into the next IFH byte */ |
| if (encode & 0xFF0000) |
| ifh_hdr[byte - 2] |= (u8)((encode & 0xFF0000) >> 16); |
| /* The b24-b31 goes into the next IFH byte */ |
| if (encode & 0xFF000000) |
| ifh_hdr[byte - 3] |= (u8)((encode & 0xFF000000) >> 24); |
| /* The b32-b39 goes into the next IFH byte */ |
| if (encode & 0xFF00000000) |
| ifh_hdr[byte - 4] |= (u8)((encode & 0xFF00000000) >> 32); |
| /* The b40-b47 goes into the next IFH byte */ |
| if (encode & 0xFF0000000000) |
| ifh_hdr[byte - 5] |= (u8)((encode & 0xFF0000000000) >> 40); |
| } |
| |
| static void sparx5_set_port_ifh(void *ifh_hdr, u16 portno) |
| { |
| /* VSTAX.RSV = 1. MSBit must be 1 */ |
| ifh_encode_bitfield(ifh_hdr, 1, VSTAX + 79, 1); |
| /* VSTAX.INGR_DROP_MODE = Enable. Don't make head-of-line blocking */ |
| ifh_encode_bitfield(ifh_hdr, 1, VSTAX + 55, 1); |
| /* MISC.CPU_MASK/DPORT = Destination port */ |
| ifh_encode_bitfield(ifh_hdr, portno, 29, 8); |
| /* MISC.PIPELINE_PT */ |
| ifh_encode_bitfield(ifh_hdr, 16, 37, 5); |
| /* MISC.PIPELINE_ACT */ |
| ifh_encode_bitfield(ifh_hdr, 1, 42, 3); |
| /* FWD.SRC_PORT = CPU */ |
| ifh_encode_bitfield(ifh_hdr, SPX5_PORT_CPU, 46, 7); |
| /* FWD.SFLOW_ID (disable SFlow sampling) */ |
| ifh_encode_bitfield(ifh_hdr, 124, 57, 7); |
| /* FWD.UPDATE_FCS = Enable. Enforce update of FCS. */ |
| ifh_encode_bitfield(ifh_hdr, 1, 67, 1); |
| } |
| |
| static int sparx5_port_open(struct net_device *ndev) |
| { |
| struct sparx5_port *port = netdev_priv(ndev); |
| int err = 0; |
| |
| sparx5_port_enable(port, true); |
| err = phylink_of_phy_connect(port->phylink, port->of_node, 0); |
| if (err) { |
| netdev_err(ndev, "Could not attach to PHY\n"); |
| return err; |
| } |
| |
| phylink_start(port->phylink); |
| |
| if (!ndev->phydev) { |
| /* power up serdes */ |
| port->conf.power_down = false; |
| if (port->conf.serdes_reset) |
| err = sparx5_serdes_set(port->sparx5, port, &port->conf); |
| else |
| err = phy_power_on(port->serdes); |
| if (err) |
| netdev_err(ndev, "%s failed\n", __func__); |
| } |
| |
| return err; |
| } |
| |
| static int sparx5_port_stop(struct net_device *ndev) |
| { |
| struct sparx5_port *port = netdev_priv(ndev); |
| int err = 0; |
| |
| sparx5_port_enable(port, false); |
| phylink_stop(port->phylink); |
| phylink_disconnect_phy(port->phylink); |
| |
| if (!ndev->phydev) { |
| /* power down serdes */ |
| port->conf.power_down = true; |
| if (port->conf.serdes_reset) |
| err = sparx5_serdes_set(port->sparx5, port, &port->conf); |
| else |
| err = phy_power_off(port->serdes); |
| if (err) |
| netdev_err(ndev, "%s failed\n", __func__); |
| } |
| return 0; |
| } |
| |
| static void sparx5_set_rx_mode(struct net_device *dev) |
| { |
| struct sparx5_port *port = netdev_priv(dev); |
| struct sparx5 *sparx5 = port->sparx5; |
| |
| if (!test_bit(port->portno, sparx5->bridge_mask)) |
| __dev_mc_sync(dev, sparx5_mc_sync, sparx5_mc_unsync); |
| } |
| |
| static int sparx5_port_get_phys_port_name(struct net_device *dev, |
| char *buf, size_t len) |
| { |
| struct sparx5_port *port = netdev_priv(dev); |
| int ret; |
| |
| ret = snprintf(buf, len, "p%d", port->portno); |
| if (ret >= len) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int sparx5_set_mac_address(struct net_device *dev, void *p) |
| { |
| struct sparx5_port *port = netdev_priv(dev); |
| struct sparx5 *sparx5 = port->sparx5; |
| const struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| /* Remove current */ |
| sparx5_mact_forget(sparx5, dev->dev_addr, port->pvid); |
| |
| /* Add new */ |
| sparx5_mact_learn(sparx5, PGID_CPU, addr->sa_data, port->pvid); |
| |
| /* Record the address */ |
| ether_addr_copy(dev->dev_addr, addr->sa_data); |
| |
| return 0; |
| } |
| |
| static int sparx5_get_port_parent_id(struct net_device *dev, |
| struct netdev_phys_item_id *ppid) |
| { |
| struct sparx5_port *sparx5_port = netdev_priv(dev); |
| struct sparx5 *sparx5 = sparx5_port->sparx5; |
| |
| ppid->id_len = sizeof(sparx5->base_mac); |
| memcpy(&ppid->id, &sparx5->base_mac, ppid->id_len); |
| |
| return 0; |
| } |
| |
| static const struct net_device_ops sparx5_port_netdev_ops = { |
| .ndo_open = sparx5_port_open, |
| .ndo_stop = sparx5_port_stop, |
| .ndo_start_xmit = sparx5_port_xmit_impl, |
| .ndo_set_rx_mode = sparx5_set_rx_mode, |
| .ndo_get_phys_port_name = sparx5_port_get_phys_port_name, |
| .ndo_set_mac_address = sparx5_set_mac_address, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_get_stats64 = sparx5_get_stats64, |
| .ndo_get_port_parent_id = sparx5_get_port_parent_id, |
| }; |
| |
| bool sparx5_netdevice_check(const struct net_device *dev) |
| { |
| return dev && (dev->netdev_ops == &sparx5_port_netdev_ops); |
| } |
| |
| struct net_device *sparx5_create_netdev(struct sparx5 *sparx5, u32 portno) |
| { |
| struct sparx5_port *spx5_port; |
| struct net_device *ndev; |
| u64 val; |
| |
| ndev = devm_alloc_etherdev(sparx5->dev, sizeof(struct sparx5_port)); |
| if (!ndev) |
| return ERR_PTR(-ENOMEM); |
| |
| SET_NETDEV_DEV(ndev, sparx5->dev); |
| spx5_port = netdev_priv(ndev); |
| spx5_port->ndev = ndev; |
| spx5_port->sparx5 = sparx5; |
| spx5_port->portno = portno; |
| sparx5_set_port_ifh(spx5_port->ifh, portno); |
| |
| ndev->netdev_ops = &sparx5_port_netdev_ops; |
| ndev->ethtool_ops = &sparx5_ethtool_ops; |
| |
| val = ether_addr_to_u64(sparx5->base_mac) + portno + 1; |
| u64_to_ether_addr(val, ndev->dev_addr); |
| |
| return ndev; |
| } |
| |
| int sparx5_register_netdevs(struct sparx5 *sparx5) |
| { |
| int portno; |
| int err; |
| |
| for (portno = 0; portno < SPX5_PORTS; portno++) |
| if (sparx5->ports[portno]) { |
| err = register_netdev(sparx5->ports[portno]->ndev); |
| if (err) { |
| dev_err(sparx5->dev, |
| "port: %02u: netdev registration failed\n", |
| portno); |
| return err; |
| } |
| sparx5_port_inj_timer_setup(sparx5->ports[portno]); |
| } |
| return 0; |
| } |
| |
| void sparx5_destroy_netdevs(struct sparx5 *sparx5) |
| { |
| struct sparx5_port *port; |
| int portno; |
| |
| for (portno = 0; portno < SPX5_PORTS; portno++) { |
| port = sparx5->ports[portno]; |
| if (port && port->phylink) { |
| /* Disconnect the phy */ |
| rtnl_lock(); |
| sparx5_port_stop(port->ndev); |
| phylink_disconnect_phy(port->phylink); |
| rtnl_unlock(); |
| phylink_destroy(port->phylink); |
| port->phylink = NULL; |
| } |
| } |
| } |
| |
| void sparx5_unregister_netdevs(struct sparx5 *sparx5) |
| { |
| int portno; |
| |
| for (portno = 0; portno < SPX5_PORTS; portno++) |
| if (sparx5->ports[portno]) |
| unregister_netdev(sparx5->ports[portno]->ndev); |
| } |
| |