| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * drivers/pwm/pwm-vt8500.c |
| * |
| * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> |
| * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/pwm.h> |
| #include <linux/delay.h> |
| #include <linux/clk.h> |
| |
| #include <asm/div64.h> |
| |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_address.h> |
| |
| /* |
| * SoC architecture allocates register space for 4 PWMs but only |
| * 2 are currently implemented. |
| */ |
| #define VT8500_NR_PWMS 2 |
| |
| #define REG_CTRL(pwm) (((pwm) << 4) + 0x00) |
| #define REG_SCALAR(pwm) (((pwm) << 4) + 0x04) |
| #define REG_PERIOD(pwm) (((pwm) << 4) + 0x08) |
| #define REG_DUTY(pwm) (((pwm) << 4) + 0x0C) |
| #define REG_STATUS 0x40 |
| |
| #define CTRL_ENABLE BIT(0) |
| #define CTRL_INVERT BIT(1) |
| #define CTRL_AUTOLOAD BIT(2) |
| #define CTRL_STOP_IMM BIT(3) |
| #define CTRL_LOAD_PRESCALE BIT(4) |
| #define CTRL_LOAD_PERIOD BIT(5) |
| |
| #define STATUS_CTRL_UPDATE BIT(0) |
| #define STATUS_SCALAR_UPDATE BIT(1) |
| #define STATUS_PERIOD_UPDATE BIT(2) |
| #define STATUS_DUTY_UPDATE BIT(3) |
| #define STATUS_ALL_UPDATE 0x0F |
| |
| struct vt8500_chip { |
| struct pwm_chip chip; |
| void __iomem *base; |
| struct clk *clk; |
| }; |
| |
| #define to_vt8500_chip(chip) container_of(chip, struct vt8500_chip, chip) |
| |
| #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) |
| static inline void pwm_busy_wait(struct vt8500_chip *vt8500, int nr, u8 bitmask) |
| { |
| int loops = msecs_to_loops(10); |
| u32 mask = bitmask << (nr << 8); |
| |
| while ((readl(vt8500->base + REG_STATUS) & mask) && --loops) |
| cpu_relax(); |
| |
| if (unlikely(!loops)) |
| dev_warn(vt8500->chip.dev, "Waiting for status bits 0x%x to clear timed out\n", |
| mask); |
| } |
| |
| static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| int duty_ns, int period_ns) |
| { |
| struct vt8500_chip *vt8500 = to_vt8500_chip(chip); |
| unsigned long long c; |
| unsigned long period_cycles, prescale, pv, dc; |
| int err; |
| u32 val; |
| |
| err = clk_enable(vt8500->clk); |
| if (err < 0) { |
| dev_err(chip->dev, "failed to enable clock\n"); |
| return err; |
| } |
| |
| c = clk_get_rate(vt8500->clk); |
| c = c * period_ns; |
| do_div(c, 1000000000); |
| period_cycles = c; |
| |
| if (period_cycles < 1) |
| period_cycles = 1; |
| prescale = (period_cycles - 1) / 4096; |
| pv = period_cycles / (prescale + 1) - 1; |
| if (pv > 4095) |
| pv = 4095; |
| |
| if (prescale > 1023) { |
| clk_disable(vt8500->clk); |
| return -EINVAL; |
| } |
| |
| c = (unsigned long long)pv * duty_ns; |
| do_div(c, period_ns); |
| dc = c; |
| |
| writel(prescale, vt8500->base + REG_SCALAR(pwm->hwpwm)); |
| pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_SCALAR_UPDATE); |
| |
| writel(pv, vt8500->base + REG_PERIOD(pwm->hwpwm)); |
| pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_PERIOD_UPDATE); |
| |
| writel(dc, vt8500->base + REG_DUTY(pwm->hwpwm)); |
| pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_DUTY_UPDATE); |
| |
| val = readl(vt8500->base + REG_CTRL(pwm->hwpwm)); |
| val |= CTRL_AUTOLOAD; |
| writel(val, vt8500->base + REG_CTRL(pwm->hwpwm)); |
| pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE); |
| |
| clk_disable(vt8500->clk); |
| return 0; |
| } |
| |
| static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct vt8500_chip *vt8500 = to_vt8500_chip(chip); |
| int err; |
| u32 val; |
| |
| err = clk_enable(vt8500->clk); |
| if (err < 0) { |
| dev_err(chip->dev, "failed to enable clock\n"); |
| return err; |
| } |
| |
| val = readl(vt8500->base + REG_CTRL(pwm->hwpwm)); |
| val |= CTRL_ENABLE; |
| writel(val, vt8500->base + REG_CTRL(pwm->hwpwm)); |
| pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE); |
| |
| return 0; |
| } |
| |
| static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct vt8500_chip *vt8500 = to_vt8500_chip(chip); |
| u32 val; |
| |
| val = readl(vt8500->base + REG_CTRL(pwm->hwpwm)); |
| val &= ~CTRL_ENABLE; |
| writel(val, vt8500->base + REG_CTRL(pwm->hwpwm)); |
| pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE); |
| |
| clk_disable(vt8500->clk); |
| } |
| |
| static int vt8500_pwm_set_polarity(struct pwm_chip *chip, |
| struct pwm_device *pwm, |
| enum pwm_polarity polarity) |
| { |
| struct vt8500_chip *vt8500 = to_vt8500_chip(chip); |
| u32 val; |
| |
| val = readl(vt8500->base + REG_CTRL(pwm->hwpwm)); |
| |
| if (polarity == PWM_POLARITY_INVERSED) |
| val |= CTRL_INVERT; |
| else |
| val &= ~CTRL_INVERT; |
| |
| writel(val, vt8500->base + REG_CTRL(pwm->hwpwm)); |
| pwm_busy_wait(vt8500, pwm->hwpwm, STATUS_CTRL_UPDATE); |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops vt8500_pwm_ops = { |
| .enable = vt8500_pwm_enable, |
| .disable = vt8500_pwm_disable, |
| .config = vt8500_pwm_config, |
| .set_polarity = vt8500_pwm_set_polarity, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct of_device_id vt8500_pwm_dt_ids[] = { |
| { .compatible = "via,vt8500-pwm", }, |
| { /* Sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids); |
| |
| static int vt8500_pwm_probe(struct platform_device *pdev) |
| { |
| struct vt8500_chip *chip; |
| struct device_node *np = pdev->dev.of_node; |
| int ret; |
| |
| if (!np) { |
| dev_err(&pdev->dev, "invalid devicetree node\n"); |
| return -EINVAL; |
| } |
| |
| chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); |
| if (chip == NULL) |
| return -ENOMEM; |
| |
| chip->chip.dev = &pdev->dev; |
| chip->chip.ops = &vt8500_pwm_ops; |
| chip->chip.npwm = VT8500_NR_PWMS; |
| |
| chip->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(chip->clk)) { |
| dev_err(&pdev->dev, "clock source not specified\n"); |
| return PTR_ERR(chip->clk); |
| } |
| |
| chip->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(chip->base)) |
| return PTR_ERR(chip->base); |
| |
| ret = clk_prepare(chip->clk); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to prepare clock\n"); |
| return ret; |
| } |
| |
| ret = pwmchip_add(&chip->chip); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to add PWM chip\n"); |
| clk_unprepare(chip->clk); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, chip); |
| return ret; |
| } |
| |
| static int vt8500_pwm_remove(struct platform_device *pdev) |
| { |
| struct vt8500_chip *chip = platform_get_drvdata(pdev); |
| |
| pwmchip_remove(&chip->chip); |
| |
| clk_unprepare(chip->clk); |
| |
| return 0; |
| } |
| |
| static struct platform_driver vt8500_pwm_driver = { |
| .probe = vt8500_pwm_probe, |
| .remove = vt8500_pwm_remove, |
| .driver = { |
| .name = "vt8500-pwm", |
| .of_match_table = vt8500_pwm_dt_ids, |
| }, |
| }; |
| module_platform_driver(vt8500_pwm_driver); |
| |
| MODULE_DESCRIPTION("VT8500 PWM Driver"); |
| MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); |
| MODULE_LICENSE("GPL v2"); |