| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 Oracle. All Rights Reserved. |
| * Author: Darrick J. Wong <darrick.wong@oracle.com> |
| */ |
| #include "xfs.h" |
| #include "xfs_fs.h" |
| #include "xfs_shared.h" |
| #include "xfs_format.h" |
| #include "xfs_btree.h" |
| #include "xfs_rmap.h" |
| #include "xfs_refcount.h" |
| #include "scrub/scrub.h" |
| #include "scrub/common.h" |
| #include "scrub/btree.h" |
| #include "xfs_ag.h" |
| |
| /* |
| * Set us up to scrub reference count btrees. |
| */ |
| int |
| xchk_setup_ag_refcountbt( |
| struct xfs_scrub *sc) |
| { |
| return xchk_setup_ag_btree(sc, false); |
| } |
| |
| /* Reference count btree scrubber. */ |
| |
| /* |
| * Confirming Reference Counts via Reverse Mappings |
| * |
| * We want to count the reverse mappings overlapping a refcount record |
| * (bno, len, refcount), allowing for the possibility that some of the |
| * overlap may come from smaller adjoining reverse mappings, while some |
| * comes from single extents which overlap the range entirely. The |
| * outer loop is as follows: |
| * |
| * 1. For all reverse mappings overlapping the refcount extent, |
| * a. If a given rmap completely overlaps, mark it as seen. |
| * b. Otherwise, record the fragment (in agbno order) for later |
| * processing. |
| * |
| * Once we've seen all the rmaps, we know that for all blocks in the |
| * refcount record we want to find $refcount owners and we've already |
| * visited $seen extents that overlap all the blocks. Therefore, we |
| * need to find ($refcount - $seen) owners for every block in the |
| * extent; call that quantity $target_nr. Proceed as follows: |
| * |
| * 2. Pull the first $target_nr fragments from the list; all of them |
| * should start at or before the start of the extent. |
| * Call this subset of fragments the working set. |
| * 3. Until there are no more unprocessed fragments, |
| * a. Find the shortest fragments in the set and remove them. |
| * b. Note the block number of the end of these fragments. |
| * c. Pull the same number of fragments from the list. All of these |
| * fragments should start at the block number recorded in the |
| * previous step. |
| * d. Put those fragments in the set. |
| * 4. Check that there are $target_nr fragments remaining in the list, |
| * and that they all end at or beyond the end of the refcount extent. |
| * |
| * If the refcount is correct, all the check conditions in the algorithm |
| * should always hold true. If not, the refcount is incorrect. |
| */ |
| struct xchk_refcnt_frag { |
| struct list_head list; |
| struct xfs_rmap_irec rm; |
| }; |
| |
| struct xchk_refcnt_check { |
| struct xfs_scrub *sc; |
| struct list_head fragments; |
| |
| /* refcount extent we're examining */ |
| xfs_agblock_t bno; |
| xfs_extlen_t len; |
| xfs_nlink_t refcount; |
| |
| /* number of owners seen */ |
| xfs_nlink_t seen; |
| }; |
| |
| /* |
| * Decide if the given rmap is large enough that we can redeem it |
| * towards refcount verification now, or if it's a fragment, in |
| * which case we'll hang onto it in the hopes that we'll later |
| * discover that we've collected exactly the correct number of |
| * fragments as the refcountbt says we should have. |
| */ |
| STATIC int |
| xchk_refcountbt_rmap_check( |
| struct xfs_btree_cur *cur, |
| struct xfs_rmap_irec *rec, |
| void *priv) |
| { |
| struct xchk_refcnt_check *refchk = priv; |
| struct xchk_refcnt_frag *frag; |
| xfs_agblock_t rm_last; |
| xfs_agblock_t rc_last; |
| int error = 0; |
| |
| if (xchk_should_terminate(refchk->sc, &error)) |
| return error; |
| |
| rm_last = rec->rm_startblock + rec->rm_blockcount - 1; |
| rc_last = refchk->bno + refchk->len - 1; |
| |
| /* Confirm that a single-owner refc extent is a CoW stage. */ |
| if (refchk->refcount == 1 && rec->rm_owner != XFS_RMAP_OWN_COW) { |
| xchk_btree_xref_set_corrupt(refchk->sc, cur, 0); |
| return 0; |
| } |
| |
| if (rec->rm_startblock <= refchk->bno && rm_last >= rc_last) { |
| /* |
| * The rmap overlaps the refcount record, so we can confirm |
| * one refcount owner seen. |
| */ |
| refchk->seen++; |
| } else { |
| /* |
| * This rmap covers only part of the refcount record, so |
| * save the fragment for later processing. If the rmapbt |
| * is healthy each rmap_irec we see will be in agbno order |
| * so we don't need insertion sort here. |
| */ |
| frag = kmem_alloc(sizeof(struct xchk_refcnt_frag), |
| KM_MAYFAIL); |
| if (!frag) |
| return -ENOMEM; |
| memcpy(&frag->rm, rec, sizeof(frag->rm)); |
| list_add_tail(&frag->list, &refchk->fragments); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Given a bunch of rmap fragments, iterate through them, keeping |
| * a running tally of the refcount. If this ever deviates from |
| * what we expect (which is the refcountbt's refcount minus the |
| * number of extents that totally covered the refcountbt extent), |
| * we have a refcountbt error. |
| */ |
| STATIC void |
| xchk_refcountbt_process_rmap_fragments( |
| struct xchk_refcnt_check *refchk) |
| { |
| struct list_head worklist; |
| struct xchk_refcnt_frag *frag; |
| struct xchk_refcnt_frag *n; |
| xfs_agblock_t bno; |
| xfs_agblock_t rbno; |
| xfs_agblock_t next_rbno; |
| xfs_nlink_t nr; |
| xfs_nlink_t target_nr; |
| |
| target_nr = refchk->refcount - refchk->seen; |
| if (target_nr == 0) |
| return; |
| |
| /* |
| * There are (refchk->rc.rc_refcount - refchk->nr refcount) |
| * references we haven't found yet. Pull that many off the |
| * fragment list and figure out where the smallest rmap ends |
| * (and therefore the next rmap should start). All the rmaps |
| * we pull off should start at or before the beginning of the |
| * refcount record's range. |
| */ |
| INIT_LIST_HEAD(&worklist); |
| rbno = NULLAGBLOCK; |
| |
| /* Make sure the fragments actually /are/ in agbno order. */ |
| bno = 0; |
| list_for_each_entry(frag, &refchk->fragments, list) { |
| if (frag->rm.rm_startblock < bno) |
| goto done; |
| bno = frag->rm.rm_startblock; |
| } |
| |
| /* |
| * Find all the rmaps that start at or before the refc extent, |
| * and put them on the worklist. |
| */ |
| nr = 0; |
| list_for_each_entry_safe(frag, n, &refchk->fragments, list) { |
| if (frag->rm.rm_startblock > refchk->bno || nr > target_nr) |
| break; |
| bno = frag->rm.rm_startblock + frag->rm.rm_blockcount; |
| if (bno < rbno) |
| rbno = bno; |
| list_move_tail(&frag->list, &worklist); |
| nr++; |
| } |
| |
| /* |
| * We should have found exactly $target_nr rmap fragments starting |
| * at or before the refcount extent. |
| */ |
| if (nr != target_nr) |
| goto done; |
| |
| while (!list_empty(&refchk->fragments)) { |
| /* Discard any fragments ending at rbno from the worklist. */ |
| nr = 0; |
| next_rbno = NULLAGBLOCK; |
| list_for_each_entry_safe(frag, n, &worklist, list) { |
| bno = frag->rm.rm_startblock + frag->rm.rm_blockcount; |
| if (bno != rbno) { |
| if (bno < next_rbno) |
| next_rbno = bno; |
| continue; |
| } |
| list_del(&frag->list); |
| kmem_free(frag); |
| nr++; |
| } |
| |
| /* Try to add nr rmaps starting at rbno to the worklist. */ |
| list_for_each_entry_safe(frag, n, &refchk->fragments, list) { |
| bno = frag->rm.rm_startblock + frag->rm.rm_blockcount; |
| if (frag->rm.rm_startblock != rbno) |
| goto done; |
| list_move_tail(&frag->list, &worklist); |
| if (next_rbno > bno) |
| next_rbno = bno; |
| nr--; |
| if (nr == 0) |
| break; |
| } |
| |
| /* |
| * If we get here and nr > 0, this means that we added fewer |
| * items to the worklist than we discarded because the fragment |
| * list ran out of items. Therefore, we cannot maintain the |
| * required refcount. Something is wrong, so we're done. |
| */ |
| if (nr) |
| goto done; |
| |
| rbno = next_rbno; |
| } |
| |
| /* |
| * Make sure the last extent we processed ends at or beyond |
| * the end of the refcount extent. |
| */ |
| if (rbno < refchk->bno + refchk->len) |
| goto done; |
| |
| /* Actually record us having seen the remaining refcount. */ |
| refchk->seen = refchk->refcount; |
| done: |
| /* Delete fragments and work list. */ |
| list_for_each_entry_safe(frag, n, &worklist, list) { |
| list_del(&frag->list); |
| kmem_free(frag); |
| } |
| list_for_each_entry_safe(frag, n, &refchk->fragments, list) { |
| list_del(&frag->list); |
| kmem_free(frag); |
| } |
| } |
| |
| /* Use the rmap entries covering this extent to verify the refcount. */ |
| STATIC void |
| xchk_refcountbt_xref_rmap( |
| struct xfs_scrub *sc, |
| xfs_agblock_t bno, |
| xfs_extlen_t len, |
| xfs_nlink_t refcount) |
| { |
| struct xchk_refcnt_check refchk = { |
| .sc = sc, |
| .bno = bno, |
| .len = len, |
| .refcount = refcount, |
| .seen = 0, |
| }; |
| struct xfs_rmap_irec low; |
| struct xfs_rmap_irec high; |
| struct xchk_refcnt_frag *frag; |
| struct xchk_refcnt_frag *n; |
| int error; |
| |
| if (!sc->sa.rmap_cur || xchk_skip_xref(sc->sm)) |
| return; |
| |
| /* Cross-reference with the rmapbt to confirm the refcount. */ |
| memset(&low, 0, sizeof(low)); |
| low.rm_startblock = bno; |
| memset(&high, 0xFF, sizeof(high)); |
| high.rm_startblock = bno + len - 1; |
| |
| INIT_LIST_HEAD(&refchk.fragments); |
| error = xfs_rmap_query_range(sc->sa.rmap_cur, &low, &high, |
| &xchk_refcountbt_rmap_check, &refchk); |
| if (!xchk_should_check_xref(sc, &error, &sc->sa.rmap_cur)) |
| goto out_free; |
| |
| xchk_refcountbt_process_rmap_fragments(&refchk); |
| if (refcount != refchk.seen) |
| xchk_btree_xref_set_corrupt(sc, sc->sa.rmap_cur, 0); |
| |
| out_free: |
| list_for_each_entry_safe(frag, n, &refchk.fragments, list) { |
| list_del(&frag->list); |
| kmem_free(frag); |
| } |
| } |
| |
| /* Cross-reference with the other btrees. */ |
| STATIC void |
| xchk_refcountbt_xref( |
| struct xfs_scrub *sc, |
| xfs_agblock_t agbno, |
| xfs_extlen_t len, |
| xfs_nlink_t refcount) |
| { |
| if (sc->sm->sm_flags & XFS_SCRUB_OFLAG_CORRUPT) |
| return; |
| |
| xchk_xref_is_used_space(sc, agbno, len); |
| xchk_xref_is_not_inode_chunk(sc, agbno, len); |
| xchk_refcountbt_xref_rmap(sc, agbno, len, refcount); |
| } |
| |
| /* Scrub a refcountbt record. */ |
| STATIC int |
| xchk_refcountbt_rec( |
| struct xchk_btree *bs, |
| union xfs_btree_rec *rec) |
| { |
| struct xfs_mount *mp = bs->cur->bc_mp; |
| xfs_agblock_t *cow_blocks = bs->private; |
| xfs_agnumber_t agno = bs->cur->bc_ag.pag->pag_agno; |
| xfs_agblock_t bno; |
| xfs_extlen_t len; |
| xfs_nlink_t refcount; |
| bool has_cowflag; |
| |
| bno = be32_to_cpu(rec->refc.rc_startblock); |
| len = be32_to_cpu(rec->refc.rc_blockcount); |
| refcount = be32_to_cpu(rec->refc.rc_refcount); |
| |
| /* Only CoW records can have refcount == 1. */ |
| has_cowflag = (bno & XFS_REFC_COW_START); |
| if ((refcount == 1 && !has_cowflag) || (refcount != 1 && has_cowflag)) |
| xchk_btree_set_corrupt(bs->sc, bs->cur, 0); |
| if (has_cowflag) |
| (*cow_blocks) += len; |
| |
| /* Check the extent. */ |
| bno &= ~XFS_REFC_COW_START; |
| if (bno + len <= bno || |
| !xfs_verify_agbno(mp, agno, bno) || |
| !xfs_verify_agbno(mp, agno, bno + len - 1)) |
| xchk_btree_set_corrupt(bs->sc, bs->cur, 0); |
| |
| if (refcount == 0) |
| xchk_btree_set_corrupt(bs->sc, bs->cur, 0); |
| |
| xchk_refcountbt_xref(bs->sc, bno, len, refcount); |
| |
| return 0; |
| } |
| |
| /* Make sure we have as many refc blocks as the rmap says. */ |
| STATIC void |
| xchk_refcount_xref_rmap( |
| struct xfs_scrub *sc, |
| xfs_filblks_t cow_blocks) |
| { |
| xfs_extlen_t refcbt_blocks = 0; |
| xfs_filblks_t blocks; |
| int error; |
| |
| if (!sc->sa.rmap_cur || xchk_skip_xref(sc->sm)) |
| return; |
| |
| /* Check that we saw as many refcbt blocks as the rmap knows about. */ |
| error = xfs_btree_count_blocks(sc->sa.refc_cur, &refcbt_blocks); |
| if (!xchk_btree_process_error(sc, sc->sa.refc_cur, 0, &error)) |
| return; |
| error = xchk_count_rmap_ownedby_ag(sc, sc->sa.rmap_cur, |
| &XFS_RMAP_OINFO_REFC, &blocks); |
| if (!xchk_should_check_xref(sc, &error, &sc->sa.rmap_cur)) |
| return; |
| if (blocks != refcbt_blocks) |
| xchk_btree_xref_set_corrupt(sc, sc->sa.rmap_cur, 0); |
| |
| /* Check that we saw as many cow blocks as the rmap knows about. */ |
| error = xchk_count_rmap_ownedby_ag(sc, sc->sa.rmap_cur, |
| &XFS_RMAP_OINFO_COW, &blocks); |
| if (!xchk_should_check_xref(sc, &error, &sc->sa.rmap_cur)) |
| return; |
| if (blocks != cow_blocks) |
| xchk_btree_xref_set_corrupt(sc, sc->sa.rmap_cur, 0); |
| } |
| |
| /* Scrub the refcount btree for some AG. */ |
| int |
| xchk_refcountbt( |
| struct xfs_scrub *sc) |
| { |
| xfs_agblock_t cow_blocks = 0; |
| int error; |
| |
| error = xchk_btree(sc, sc->sa.refc_cur, xchk_refcountbt_rec, |
| &XFS_RMAP_OINFO_REFC, &cow_blocks); |
| if (error) |
| return error; |
| |
| xchk_refcount_xref_rmap(sc, cow_blocks); |
| |
| return 0; |
| } |
| |
| /* xref check that a cow staging extent is marked in the refcountbt. */ |
| void |
| xchk_xref_is_cow_staging( |
| struct xfs_scrub *sc, |
| xfs_agblock_t agbno, |
| xfs_extlen_t len) |
| { |
| struct xfs_refcount_irec rc; |
| bool has_cowflag; |
| int has_refcount; |
| int error; |
| |
| if (!sc->sa.refc_cur || xchk_skip_xref(sc->sm)) |
| return; |
| |
| /* Find the CoW staging extent. */ |
| error = xfs_refcount_lookup_le(sc->sa.refc_cur, |
| agbno + XFS_REFC_COW_START, &has_refcount); |
| if (!xchk_should_check_xref(sc, &error, &sc->sa.refc_cur)) |
| return; |
| if (!has_refcount) { |
| xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0); |
| return; |
| } |
| |
| error = xfs_refcount_get_rec(sc->sa.refc_cur, &rc, &has_refcount); |
| if (!xchk_should_check_xref(sc, &error, &sc->sa.refc_cur)) |
| return; |
| if (!has_refcount) { |
| xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0); |
| return; |
| } |
| |
| /* CoW flag must be set, refcount must be 1. */ |
| has_cowflag = (rc.rc_startblock & XFS_REFC_COW_START); |
| if (!has_cowflag || rc.rc_refcount != 1) |
| xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0); |
| |
| /* Must be at least as long as what was passed in */ |
| if (rc.rc_blockcount < len) |
| xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0); |
| } |
| |
| /* |
| * xref check that the extent is not shared. Only file data blocks |
| * can have multiple owners. |
| */ |
| void |
| xchk_xref_is_not_shared( |
| struct xfs_scrub *sc, |
| xfs_agblock_t agbno, |
| xfs_extlen_t len) |
| { |
| bool shared; |
| int error; |
| |
| if (!sc->sa.refc_cur || xchk_skip_xref(sc->sm)) |
| return; |
| |
| error = xfs_refcount_has_record(sc->sa.refc_cur, agbno, len, &shared); |
| if (!xchk_should_check_xref(sc, &error, &sc->sa.refc_cur)) |
| return; |
| if (shared) |
| xchk_btree_xref_set_corrupt(sc, sc->sa.refc_cur, 0); |
| } |