| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (c) 2020 Caleb Connolly <caleb@connolly.tech> |
| * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree: |
| * Copyright (c) 2020, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/swab.h> |
| #include <linux/backlight.h> |
| |
| #include <video/mipi_display.h> |
| |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| |
| struct sofef00_panel { |
| struct drm_panel panel; |
| struct mipi_dsi_device *dsi; |
| struct regulator *supply; |
| struct gpio_desc *reset_gpio; |
| const struct drm_display_mode *mode; |
| bool prepared; |
| }; |
| |
| static inline |
| struct sofef00_panel *to_sofef00_panel(struct drm_panel *panel) |
| { |
| return container_of(panel, struct sofef00_panel, panel); |
| } |
| |
| #define dsi_dcs_write_seq(dsi, seq...) do { \ |
| static const u8 d[] = { seq }; \ |
| int ret; \ |
| ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \ |
| if (ret < 0) \ |
| return ret; \ |
| } while (0) |
| |
| static void sofef00_panel_reset(struct sofef00_panel *ctx) |
| { |
| gpiod_set_value_cansleep(ctx->reset_gpio, 0); |
| usleep_range(5000, 6000); |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); |
| usleep_range(2000, 3000); |
| gpiod_set_value_cansleep(ctx->reset_gpio, 0); |
| usleep_range(12000, 13000); |
| } |
| |
| static int sofef00_panel_on(struct sofef00_panel *ctx) |
| { |
| struct mipi_dsi_device *dsi = ctx->dsi; |
| struct device *dev = &dsi->dev; |
| int ret; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_exit_sleep_mode(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to exit sleep mode: %d\n", ret); |
| return ret; |
| } |
| usleep_range(10000, 11000); |
| |
| dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); |
| |
| ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set tear on: %d\n", ret); |
| return ret; |
| } |
| |
| dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); |
| dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); |
| dsi_dcs_write_seq(dsi, 0xb0, 0x07); |
| dsi_dcs_write_seq(dsi, 0xb6, 0x12); |
| dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); |
| dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20); |
| dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00); |
| |
| ret = mipi_dsi_dcs_set_display_on(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set display on: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int sofef00_panel_off(struct sofef00_panel *ctx) |
| { |
| struct mipi_dsi_device *dsi = ctx->dsi; |
| struct device *dev = &dsi->dev; |
| int ret; |
| |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_set_display_off(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set display off: %d\n", ret); |
| return ret; |
| } |
| msleep(40); |
| |
| ret = mipi_dsi_dcs_enter_sleep_mode(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to enter sleep mode: %d\n", ret); |
| return ret; |
| } |
| msleep(160); |
| |
| return 0; |
| } |
| |
| static int sofef00_panel_prepare(struct drm_panel *panel) |
| { |
| struct sofef00_panel *ctx = to_sofef00_panel(panel); |
| struct device *dev = &ctx->dsi->dev; |
| int ret; |
| |
| if (ctx->prepared) |
| return 0; |
| |
| ret = regulator_enable(ctx->supply); |
| if (ret < 0) { |
| dev_err(dev, "Failed to enable regulator: %d\n", ret); |
| return ret; |
| } |
| |
| sofef00_panel_reset(ctx); |
| |
| ret = sofef00_panel_on(ctx); |
| if (ret < 0) { |
| dev_err(dev, "Failed to initialize panel: %d\n", ret); |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); |
| return ret; |
| } |
| |
| ctx->prepared = true; |
| return 0; |
| } |
| |
| static int sofef00_panel_unprepare(struct drm_panel *panel) |
| { |
| struct sofef00_panel *ctx = to_sofef00_panel(panel); |
| struct device *dev = &ctx->dsi->dev; |
| int ret; |
| |
| if (!ctx->prepared) |
| return 0; |
| |
| ret = sofef00_panel_off(ctx); |
| if (ret < 0) |
| dev_err(dev, "Failed to un-initialize panel: %d\n", ret); |
| |
| regulator_disable(ctx->supply); |
| |
| ctx->prepared = false; |
| return 0; |
| } |
| |
| static const struct drm_display_mode enchilada_panel_mode = { |
| .clock = (1080 + 112 + 16 + 36) * (2280 + 36 + 8 + 12) * 60 / 1000, |
| .hdisplay = 1080, |
| .hsync_start = 1080 + 112, |
| .hsync_end = 1080 + 112 + 16, |
| .htotal = 1080 + 112 + 16 + 36, |
| .vdisplay = 2280, |
| .vsync_start = 2280 + 36, |
| .vsync_end = 2280 + 36 + 8, |
| .vtotal = 2280 + 36 + 8 + 12, |
| .width_mm = 68, |
| .height_mm = 145, |
| }; |
| |
| static const struct drm_display_mode fajita_panel_mode = { |
| .clock = (1080 + 72 + 16 + 36) * (2340 + 32 + 4 + 18) * 60 / 1000, |
| .hdisplay = 1080, |
| .hsync_start = 1080 + 72, |
| .hsync_end = 1080 + 72 + 16, |
| .htotal = 1080 + 72 + 16 + 36, |
| .vdisplay = 2340, |
| .vsync_start = 2340 + 32, |
| .vsync_end = 2340 + 32 + 4, |
| .vtotal = 2340 + 32 + 4 + 18, |
| .width_mm = 68, |
| .height_mm = 145, |
| }; |
| |
| static int sofef00_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector) |
| { |
| struct drm_display_mode *mode; |
| struct sofef00_panel *ctx = to_sofef00_panel(panel); |
| |
| mode = drm_mode_duplicate(connector->dev, ctx->mode); |
| if (!mode) |
| return -ENOMEM; |
| |
| drm_mode_set_name(mode); |
| |
| mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; |
| connector->display_info.width_mm = mode->width_mm; |
| connector->display_info.height_mm = mode->height_mm; |
| drm_mode_probed_add(connector, mode); |
| |
| return 1; |
| } |
| |
| static const struct drm_panel_funcs sofef00_panel_panel_funcs = { |
| .prepare = sofef00_panel_prepare, |
| .unprepare = sofef00_panel_unprepare, |
| .get_modes = sofef00_panel_get_modes, |
| }; |
| |
| static int sofef00_panel_bl_update_status(struct backlight_device *bl) |
| { |
| struct mipi_dsi_device *dsi = bl_get_data(bl); |
| int err; |
| u16 brightness; |
| |
| brightness = (u16)backlight_get_brightness(bl); |
| // This panel needs the high and low bytes swapped for the brightness value |
| brightness = __swab16(brightness); |
| |
| err = mipi_dsi_dcs_set_display_brightness(dsi, brightness); |
| if (err < 0) |
| return err; |
| |
| return 0; |
| } |
| |
| static const struct backlight_ops sofef00_panel_bl_ops = { |
| .update_status = sofef00_panel_bl_update_status, |
| }; |
| |
| static struct backlight_device * |
| sofef00_create_backlight(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| const struct backlight_properties props = { |
| .type = BACKLIGHT_PLATFORM, |
| .brightness = 1023, |
| .max_brightness = 1023, |
| }; |
| |
| return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, |
| &sofef00_panel_bl_ops, &props); |
| } |
| |
| static int sofef00_panel_probe(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| struct sofef00_panel *ctx; |
| int ret; |
| |
| ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| ctx->mode = of_device_get_match_data(dev); |
| |
| if (!ctx->mode) { |
| dev_err(dev, "Missing device mode\n"); |
| return -ENODEV; |
| } |
| |
| ctx->supply = devm_regulator_get(dev, "vddio"); |
| if (IS_ERR(ctx->supply)) { |
| ret = PTR_ERR(ctx->supply); |
| dev_err(dev, "Failed to get vddio regulator: %d\n", ret); |
| return ret; |
| } |
| |
| ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(ctx->reset_gpio)) { |
| ret = PTR_ERR(ctx->reset_gpio); |
| dev_warn(dev, "Failed to get reset-gpios: %d\n", ret); |
| return ret; |
| } |
| |
| ctx->dsi = dsi; |
| mipi_dsi_set_drvdata(dsi, ctx); |
| |
| dsi->lanes = 4; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| |
| drm_panel_init(&ctx->panel, dev, &sofef00_panel_panel_funcs, |
| DRM_MODE_CONNECTOR_DSI); |
| |
| ctx->panel.backlight = sofef00_create_backlight(dsi); |
| if (IS_ERR(ctx->panel.backlight)) |
| return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight), |
| "Failed to create backlight\n"); |
| |
| drm_panel_add(&ctx->panel); |
| |
| ret = mipi_dsi_attach(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to attach to DSI host: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int sofef00_panel_remove(struct mipi_dsi_device *dsi) |
| { |
| struct sofef00_panel *ctx = mipi_dsi_get_drvdata(dsi); |
| int ret; |
| |
| ret = mipi_dsi_detach(dsi); |
| if (ret < 0) |
| dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); |
| |
| drm_panel_remove(&ctx->panel); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id sofef00_panel_of_match[] = { |
| { // OnePlus 6 / enchilada |
| .compatible = "samsung,sofef00", |
| .data = &enchilada_panel_mode, |
| }, |
| { // OnePlus 6T / fajita |
| .compatible = "samsung,s6e3fc2x01", |
| .data = &fajita_panel_mode, |
| }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, sofef00_panel_of_match); |
| |
| static struct mipi_dsi_driver sofef00_panel_driver = { |
| .probe = sofef00_panel_probe, |
| .remove = sofef00_panel_remove, |
| .driver = { |
| .name = "panel-oneplus6", |
| .of_match_table = sofef00_panel_of_match, |
| }, |
| }; |
| |
| module_mipi_dsi_driver(sofef00_panel_driver); |
| |
| MODULE_AUTHOR("Caleb Connolly <caleb@connolly.tech>"); |
| MODULE_DESCRIPTION("DRM driver for Samsung AMOLED DSI panels found in OnePlus 6/6T phones"); |
| MODULE_LICENSE("GPL v2"); |