| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * TI Camera Access Layer (CAL) - Driver |
| * |
| * Copyright (c) 2015-2020 Texas Instruments Inc. |
| * |
| * Authors: |
| * Benoit Parrot <bparrot@ti.com> |
| * Laurent Pinchart <laurent.pinchart@ideasonboard.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <linux/videodev2.h> |
| |
| #include <media/media-device.h> |
| #include <media/v4l2-async.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-device.h> |
| #include <media/videobuf2-core.h> |
| #include <media/videobuf2-dma-contig.h> |
| |
| #include "cal.h" |
| #include "cal_regs.h" |
| |
| MODULE_DESCRIPTION("TI CAL driver"); |
| MODULE_AUTHOR("Benoit Parrot, <bparrot@ti.com>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_VERSION("0.1.0"); |
| |
| int cal_video_nr = -1; |
| module_param_named(video_nr, cal_video_nr, uint, 0644); |
| MODULE_PARM_DESC(video_nr, "videoX start number, -1 is autodetect"); |
| |
| unsigned int cal_debug; |
| module_param_named(debug, cal_debug, uint, 0644); |
| MODULE_PARM_DESC(debug, "activates debug info"); |
| |
| #ifdef CONFIG_VIDEO_TI_CAL_MC |
| #define CAL_MC_API_DEFAULT 1 |
| #else |
| #define CAL_MC_API_DEFAULT 0 |
| #endif |
| |
| bool cal_mc_api = CAL_MC_API_DEFAULT; |
| module_param_named(mc_api, cal_mc_api, bool, 0444); |
| MODULE_PARM_DESC(mc_api, "activates the MC API"); |
| |
| /* ------------------------------------------------------------------ |
| * Format Handling |
| * ------------------------------------------------------------------ |
| */ |
| |
| const struct cal_format_info cal_formats[] = { |
| { |
| .fourcc = V4L2_PIX_FMT_YUYV, |
| .code = MEDIA_BUS_FMT_YUYV8_2X8, |
| .bpp = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_UYVY, |
| .code = MEDIA_BUS_FMT_UYVY8_2X8, |
| .bpp = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_YVYU, |
| .code = MEDIA_BUS_FMT_YVYU8_2X8, |
| .bpp = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_VYUY, |
| .code = MEDIA_BUS_FMT_VYUY8_2X8, |
| .bpp = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */ |
| .code = MEDIA_BUS_FMT_RGB565_2X8_LE, |
| .bpp = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */ |
| .code = MEDIA_BUS_FMT_RGB565_2X8_BE, |
| .bpp = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */ |
| .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE, |
| .bpp = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */ |
| .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE, |
| .bpp = 16, |
| }, { |
| .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */ |
| .code = MEDIA_BUS_FMT_RGB888_2X12_LE, |
| .bpp = 24, |
| }, { |
| .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */ |
| .code = MEDIA_BUS_FMT_RGB888_2X12_BE, |
| .bpp = 24, |
| }, { |
| .fourcc = V4L2_PIX_FMT_RGB32, /* argb */ |
| .code = MEDIA_BUS_FMT_ARGB8888_1X32, |
| .bpp = 32, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SBGGR8, |
| .code = MEDIA_BUS_FMT_SBGGR8_1X8, |
| .bpp = 8, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SGBRG8, |
| .code = MEDIA_BUS_FMT_SGBRG8_1X8, |
| .bpp = 8, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SGRBG8, |
| .code = MEDIA_BUS_FMT_SGRBG8_1X8, |
| .bpp = 8, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SRGGB8, |
| .code = MEDIA_BUS_FMT_SRGGB8_1X8, |
| .bpp = 8, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SBGGR10, |
| .code = MEDIA_BUS_FMT_SBGGR10_1X10, |
| .bpp = 10, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SGBRG10, |
| .code = MEDIA_BUS_FMT_SGBRG10_1X10, |
| .bpp = 10, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SGRBG10, |
| .code = MEDIA_BUS_FMT_SGRBG10_1X10, |
| .bpp = 10, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SRGGB10, |
| .code = MEDIA_BUS_FMT_SRGGB10_1X10, |
| .bpp = 10, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SBGGR12, |
| .code = MEDIA_BUS_FMT_SBGGR12_1X12, |
| .bpp = 12, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SGBRG12, |
| .code = MEDIA_BUS_FMT_SGBRG12_1X12, |
| .bpp = 12, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SGRBG12, |
| .code = MEDIA_BUS_FMT_SGRBG12_1X12, |
| .bpp = 12, |
| }, { |
| .fourcc = V4L2_PIX_FMT_SRGGB12, |
| .code = MEDIA_BUS_FMT_SRGGB12_1X12, |
| .bpp = 12, |
| }, |
| }; |
| |
| const unsigned int cal_num_formats = ARRAY_SIZE(cal_formats); |
| |
| const struct cal_format_info *cal_format_by_fourcc(u32 fourcc) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(cal_formats); ++i) { |
| if (cal_formats[i].fourcc == fourcc) |
| return &cal_formats[i]; |
| } |
| |
| return NULL; |
| } |
| |
| const struct cal_format_info *cal_format_by_code(u32 code) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(cal_formats); ++i) { |
| if (cal_formats[i].code == code) |
| return &cal_formats[i]; |
| } |
| |
| return NULL; |
| } |
| |
| /* ------------------------------------------------------------------ |
| * Platform Data |
| * ------------------------------------------------------------------ |
| */ |
| |
| static const struct cal_camerarx_data dra72x_cal_camerarx[] = { |
| { |
| .fields = { |
| [F_CTRLCLKEN] = { 10, 10 }, |
| [F_CAMMODE] = { 11, 12 }, |
| [F_LANEENABLE] = { 13, 16 }, |
| [F_CSI_MODE] = { 17, 17 }, |
| }, |
| .num_lanes = 4, |
| }, |
| { |
| .fields = { |
| [F_CTRLCLKEN] = { 0, 0 }, |
| [F_CAMMODE] = { 1, 2 }, |
| [F_LANEENABLE] = { 3, 4 }, |
| [F_CSI_MODE] = { 5, 5 }, |
| }, |
| .num_lanes = 2, |
| }, |
| }; |
| |
| static const struct cal_data dra72x_cal_data = { |
| .camerarx = dra72x_cal_camerarx, |
| .num_csi2_phy = ARRAY_SIZE(dra72x_cal_camerarx), |
| }; |
| |
| static const struct cal_data dra72x_es1_cal_data = { |
| .camerarx = dra72x_cal_camerarx, |
| .num_csi2_phy = ARRAY_SIZE(dra72x_cal_camerarx), |
| .flags = DRA72_CAL_PRE_ES2_LDO_DISABLE, |
| }; |
| |
| static const struct cal_camerarx_data dra76x_cal_csi_phy[] = { |
| { |
| .fields = { |
| [F_CTRLCLKEN] = { 8, 8 }, |
| [F_CAMMODE] = { 9, 10 }, |
| [F_CSI_MODE] = { 11, 11 }, |
| [F_LANEENABLE] = { 27, 31 }, |
| }, |
| .num_lanes = 5, |
| }, |
| { |
| .fields = { |
| [F_CTRLCLKEN] = { 0, 0 }, |
| [F_CAMMODE] = { 1, 2 }, |
| [F_CSI_MODE] = { 3, 3 }, |
| [F_LANEENABLE] = { 24, 26 }, |
| }, |
| .num_lanes = 3, |
| }, |
| }; |
| |
| static const struct cal_data dra76x_cal_data = { |
| .camerarx = dra76x_cal_csi_phy, |
| .num_csi2_phy = ARRAY_SIZE(dra76x_cal_csi_phy), |
| }; |
| |
| static const struct cal_camerarx_data am654_cal_csi_phy[] = { |
| { |
| .fields = { |
| [F_CTRLCLKEN] = { 15, 15 }, |
| [F_CAMMODE] = { 24, 25 }, |
| [F_LANEENABLE] = { 0, 4 }, |
| }, |
| .num_lanes = 5, |
| }, |
| }; |
| |
| static const struct cal_data am654_cal_data = { |
| .camerarx = am654_cal_csi_phy, |
| .num_csi2_phy = ARRAY_SIZE(am654_cal_csi_phy), |
| }; |
| |
| /* ------------------------------------------------------------------ |
| * I/O Register Accessors |
| * ------------------------------------------------------------------ |
| */ |
| |
| void cal_quickdump_regs(struct cal_dev *cal) |
| { |
| unsigned int i; |
| |
| cal_info(cal, "CAL Registers @ 0x%pa:\n", &cal->res->start); |
| print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4, |
| (__force const void *)cal->base, |
| resource_size(cal->res), false); |
| |
| for (i = 0; i < cal->data->num_csi2_phy; ++i) { |
| struct cal_camerarx *phy = cal->phy[i]; |
| |
| cal_info(cal, "CSI2 Core %u Registers @ %pa:\n", i, |
| &phy->res->start); |
| print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4, |
| (__force const void *)phy->base, |
| resource_size(phy->res), |
| false); |
| } |
| } |
| |
| /* ------------------------------------------------------------------ |
| * Context Management |
| * ------------------------------------------------------------------ |
| */ |
| |
| #define CAL_MAX_PIX_PROC 4 |
| |
| static int cal_reserve_pix_proc(struct cal_dev *cal) |
| { |
| unsigned long ret; |
| |
| spin_lock(&cal->v4l2_dev.lock); |
| |
| ret = find_first_zero_bit(&cal->reserved_pix_proc_mask, CAL_MAX_PIX_PROC); |
| |
| if (ret == CAL_MAX_PIX_PROC) { |
| spin_unlock(&cal->v4l2_dev.lock); |
| return -ENOSPC; |
| } |
| |
| cal->reserved_pix_proc_mask |= BIT(ret); |
| |
| spin_unlock(&cal->v4l2_dev.lock); |
| |
| return ret; |
| } |
| |
| static void cal_release_pix_proc(struct cal_dev *cal, unsigned int pix_proc_num) |
| { |
| spin_lock(&cal->v4l2_dev.lock); |
| |
| cal->reserved_pix_proc_mask &= ~BIT(pix_proc_num); |
| |
| spin_unlock(&cal->v4l2_dev.lock); |
| } |
| |
| static void cal_ctx_csi2_config(struct cal_ctx *ctx) |
| { |
| u32 val; |
| |
| val = cal_read(ctx->cal, CAL_CSI2_CTX(ctx->phy->instance, ctx->csi2_ctx)); |
| cal_set_field(&val, ctx->cport, CAL_CSI2_CTX_CPORT_MASK); |
| /* |
| * DT type: MIPI CSI-2 Specs |
| * 0x1: All - DT filter is disabled |
| * 0x24: RGB888 1 pixel = 3 bytes |
| * 0x2B: RAW10 4 pixels = 5 bytes |
| * 0x2A: RAW8 1 pixel = 1 byte |
| * 0x1E: YUV422 2 pixels = 4 bytes |
| */ |
| cal_set_field(&val, ctx->datatype, CAL_CSI2_CTX_DT_MASK); |
| cal_set_field(&val, ctx->vc, CAL_CSI2_CTX_VC_MASK); |
| cal_set_field(&val, ctx->v_fmt.fmt.pix.height, CAL_CSI2_CTX_LINES_MASK); |
| cal_set_field(&val, CAL_CSI2_CTX_ATT_PIX, CAL_CSI2_CTX_ATT_MASK); |
| cal_set_field(&val, CAL_CSI2_CTX_PACK_MODE_LINE, |
| CAL_CSI2_CTX_PACK_MODE_MASK); |
| cal_write(ctx->cal, CAL_CSI2_CTX(ctx->phy->instance, ctx->csi2_ctx), val); |
| ctx_dbg(3, ctx, "CAL_CSI2_CTX(%u, %u) = 0x%08x\n", |
| ctx->phy->instance, ctx->csi2_ctx, |
| cal_read(ctx->cal, CAL_CSI2_CTX(ctx->phy->instance, ctx->csi2_ctx))); |
| } |
| |
| static void cal_ctx_pix_proc_config(struct cal_ctx *ctx) |
| { |
| u32 val, extract, pack; |
| |
| switch (ctx->fmtinfo->bpp) { |
| case 8: |
| extract = CAL_PIX_PROC_EXTRACT_B8; |
| pack = CAL_PIX_PROC_PACK_B8; |
| break; |
| case 10: |
| extract = CAL_PIX_PROC_EXTRACT_B10_MIPI; |
| pack = CAL_PIX_PROC_PACK_B16; |
| break; |
| case 12: |
| extract = CAL_PIX_PROC_EXTRACT_B12_MIPI; |
| pack = CAL_PIX_PROC_PACK_B16; |
| break; |
| case 16: |
| extract = CAL_PIX_PROC_EXTRACT_B16_LE; |
| pack = CAL_PIX_PROC_PACK_B16; |
| break; |
| default: |
| /* |
| * If you see this warning then it means that you added |
| * some new entry in the cal_formats[] array with a different |
| * bit per pixel values then the one supported below. |
| * Either add support for the new bpp value below or adjust |
| * the new entry to use one of the value below. |
| * |
| * Instead of failing here just use 8 bpp as a default. |
| */ |
| dev_warn_once(ctx->cal->dev, |
| "%s:%d:%s: bpp:%d unsupported! Overwritten with 8.\n", |
| __FILE__, __LINE__, __func__, ctx->fmtinfo->bpp); |
| extract = CAL_PIX_PROC_EXTRACT_B8; |
| pack = CAL_PIX_PROC_PACK_B8; |
| break; |
| } |
| |
| val = cal_read(ctx->cal, CAL_PIX_PROC(ctx->pix_proc)); |
| cal_set_field(&val, extract, CAL_PIX_PROC_EXTRACT_MASK); |
| cal_set_field(&val, CAL_PIX_PROC_DPCMD_BYPASS, CAL_PIX_PROC_DPCMD_MASK); |
| cal_set_field(&val, CAL_PIX_PROC_DPCME_BYPASS, CAL_PIX_PROC_DPCME_MASK); |
| cal_set_field(&val, pack, CAL_PIX_PROC_PACK_MASK); |
| cal_set_field(&val, ctx->cport, CAL_PIX_PROC_CPORT_MASK); |
| cal_set_field(&val, 1, CAL_PIX_PROC_EN_MASK); |
| cal_write(ctx->cal, CAL_PIX_PROC(ctx->pix_proc), val); |
| ctx_dbg(3, ctx, "CAL_PIX_PROC(%u) = 0x%08x\n", ctx->pix_proc, |
| cal_read(ctx->cal, CAL_PIX_PROC(ctx->pix_proc))); |
| } |
| |
| static void cal_ctx_wr_dma_config(struct cal_ctx *ctx) |
| { |
| unsigned int stride = ctx->v_fmt.fmt.pix.bytesperline; |
| u32 val; |
| |
| val = cal_read(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx)); |
| cal_set_field(&val, ctx->cport, CAL_WR_DMA_CTRL_CPORT_MASK); |
| cal_set_field(&val, ctx->v_fmt.fmt.pix.height, |
| CAL_WR_DMA_CTRL_YSIZE_MASK); |
| cal_set_field(&val, CAL_WR_DMA_CTRL_DTAG_PIX_DAT, |
| CAL_WR_DMA_CTRL_DTAG_MASK); |
| cal_set_field(&val, CAL_WR_DMA_CTRL_PATTERN_LINEAR, |
| CAL_WR_DMA_CTRL_PATTERN_MASK); |
| cal_set_field(&val, 1, CAL_WR_DMA_CTRL_STALL_RD_MASK); |
| cal_write(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx), val); |
| ctx_dbg(3, ctx, "CAL_WR_DMA_CTRL(%d) = 0x%08x\n", ctx->dma_ctx, |
| cal_read(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx))); |
| |
| cal_write_field(ctx->cal, CAL_WR_DMA_OFST(ctx->dma_ctx), |
| stride / 16, CAL_WR_DMA_OFST_MASK); |
| ctx_dbg(3, ctx, "CAL_WR_DMA_OFST(%d) = 0x%08x\n", ctx->dma_ctx, |
| cal_read(ctx->cal, CAL_WR_DMA_OFST(ctx->dma_ctx))); |
| |
| val = cal_read(ctx->cal, CAL_WR_DMA_XSIZE(ctx->dma_ctx)); |
| /* 64 bit word means no skipping */ |
| cal_set_field(&val, 0, CAL_WR_DMA_XSIZE_XSKIP_MASK); |
| /* |
| * The XSIZE field is expressed in 64-bit units and prevents overflows |
| * in case of synchronization issues by limiting the number of bytes |
| * written per line. |
| */ |
| cal_set_field(&val, stride / 8, CAL_WR_DMA_XSIZE_MASK); |
| cal_write(ctx->cal, CAL_WR_DMA_XSIZE(ctx->dma_ctx), val); |
| ctx_dbg(3, ctx, "CAL_WR_DMA_XSIZE(%d) = 0x%08x\n", ctx->dma_ctx, |
| cal_read(ctx->cal, CAL_WR_DMA_XSIZE(ctx->dma_ctx))); |
| } |
| |
| void cal_ctx_set_dma_addr(struct cal_ctx *ctx, dma_addr_t addr) |
| { |
| cal_write(ctx->cal, CAL_WR_DMA_ADDR(ctx->dma_ctx), addr); |
| } |
| |
| static void cal_ctx_wr_dma_enable(struct cal_ctx *ctx) |
| { |
| u32 val = cal_read(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx)); |
| |
| cal_set_field(&val, CAL_WR_DMA_CTRL_MODE_CONST, |
| CAL_WR_DMA_CTRL_MODE_MASK); |
| cal_write(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx), val); |
| } |
| |
| static void cal_ctx_wr_dma_disable(struct cal_ctx *ctx) |
| { |
| u32 val = cal_read(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx)); |
| |
| cal_set_field(&val, CAL_WR_DMA_CTRL_MODE_DIS, |
| CAL_WR_DMA_CTRL_MODE_MASK); |
| cal_write(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx), val); |
| } |
| |
| static bool cal_ctx_wr_dma_stopped(struct cal_ctx *ctx) |
| { |
| bool stopped; |
| |
| spin_lock_irq(&ctx->dma.lock); |
| stopped = ctx->dma.state == CAL_DMA_STOPPED; |
| spin_unlock_irq(&ctx->dma.lock); |
| |
| return stopped; |
| } |
| |
| int cal_ctx_prepare(struct cal_ctx *ctx) |
| { |
| int ret; |
| |
| ctx->use_pix_proc = !ctx->fmtinfo->meta; |
| |
| if (ctx->use_pix_proc) { |
| ret = cal_reserve_pix_proc(ctx->cal); |
| if (ret < 0) { |
| ctx_err(ctx, "Failed to reserve pix proc: %d\n", ret); |
| return ret; |
| } |
| |
| ctx->pix_proc = ret; |
| } |
| |
| return 0; |
| } |
| |
| void cal_ctx_unprepare(struct cal_ctx *ctx) |
| { |
| if (ctx->use_pix_proc) |
| cal_release_pix_proc(ctx->cal, ctx->pix_proc); |
| } |
| |
| void cal_ctx_start(struct cal_ctx *ctx) |
| { |
| ctx->sequence = 0; |
| ctx->dma.state = CAL_DMA_RUNNING; |
| |
| /* Configure the CSI-2, pixel processing and write DMA contexts. */ |
| cal_ctx_csi2_config(ctx); |
| if (ctx->use_pix_proc) |
| cal_ctx_pix_proc_config(ctx); |
| cal_ctx_wr_dma_config(ctx); |
| |
| /* Enable IRQ_WDMA_END and IRQ_WDMA_START. */ |
| cal_write(ctx->cal, CAL_HL_IRQENABLE_SET(1), |
| CAL_HL_IRQ_WDMA_END_MASK(ctx->dma_ctx)); |
| cal_write(ctx->cal, CAL_HL_IRQENABLE_SET(2), |
| CAL_HL_IRQ_WDMA_START_MASK(ctx->dma_ctx)); |
| |
| cal_ctx_wr_dma_enable(ctx); |
| } |
| |
| void cal_ctx_stop(struct cal_ctx *ctx) |
| { |
| long timeout; |
| |
| /* |
| * Request DMA stop and wait until it completes. If completion times |
| * out, forcefully disable the DMA. |
| */ |
| spin_lock_irq(&ctx->dma.lock); |
| ctx->dma.state = CAL_DMA_STOP_REQUESTED; |
| spin_unlock_irq(&ctx->dma.lock); |
| |
| timeout = wait_event_timeout(ctx->dma.wait, cal_ctx_wr_dma_stopped(ctx), |
| msecs_to_jiffies(500)); |
| if (!timeout) { |
| ctx_err(ctx, "failed to disable dma cleanly\n"); |
| cal_ctx_wr_dma_disable(ctx); |
| } |
| |
| /* Disable IRQ_WDMA_END and IRQ_WDMA_START. */ |
| cal_write(ctx->cal, CAL_HL_IRQENABLE_CLR(1), |
| CAL_HL_IRQ_WDMA_END_MASK(ctx->dma_ctx)); |
| cal_write(ctx->cal, CAL_HL_IRQENABLE_CLR(2), |
| CAL_HL_IRQ_WDMA_START_MASK(ctx->dma_ctx)); |
| |
| ctx->dma.state = CAL_DMA_STOPPED; |
| |
| /* Disable CSI2 context */ |
| cal_write(ctx->cal, CAL_CSI2_CTX(ctx->phy->instance, ctx->csi2_ctx), 0); |
| |
| /* Disable pix proc */ |
| if (ctx->use_pix_proc) |
| cal_write(ctx->cal, CAL_PIX_PROC(ctx->pix_proc), 0); |
| } |
| |
| /* ------------------------------------------------------------------ |
| * IRQ Handling |
| * ------------------------------------------------------------------ |
| */ |
| |
| static inline void cal_irq_wdma_start(struct cal_ctx *ctx) |
| { |
| spin_lock(&ctx->dma.lock); |
| |
| if (ctx->dma.state == CAL_DMA_STOP_REQUESTED) { |
| /* |
| * If a stop is requested, disable the write DMA context |
| * immediately. The CAL_WR_DMA_CTRL_j.MODE field is shadowed, |
| * the current frame will complete and the DMA will then stop. |
| */ |
| cal_ctx_wr_dma_disable(ctx); |
| ctx->dma.state = CAL_DMA_STOP_PENDING; |
| } else if (!list_empty(&ctx->dma.queue) && !ctx->dma.pending) { |
| /* |
| * Otherwise, if a new buffer is available, queue it to the |
| * hardware. |
| */ |
| struct cal_buffer *buf; |
| dma_addr_t addr; |
| |
| buf = list_first_entry(&ctx->dma.queue, struct cal_buffer, |
| list); |
| addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); |
| cal_ctx_set_dma_addr(ctx, addr); |
| |
| ctx->dma.pending = buf; |
| list_del(&buf->list); |
| } |
| |
| spin_unlock(&ctx->dma.lock); |
| } |
| |
| static inline void cal_irq_wdma_end(struct cal_ctx *ctx) |
| { |
| struct cal_buffer *buf = NULL; |
| |
| spin_lock(&ctx->dma.lock); |
| |
| /* If the DMA context was stopping, it is now stopped. */ |
| if (ctx->dma.state == CAL_DMA_STOP_PENDING) { |
| ctx->dma.state = CAL_DMA_STOPPED; |
| wake_up(&ctx->dma.wait); |
| } |
| |
| /* If a new buffer was queued, complete the current buffer. */ |
| if (ctx->dma.pending) { |
| buf = ctx->dma.active; |
| ctx->dma.active = ctx->dma.pending; |
| ctx->dma.pending = NULL; |
| } |
| |
| spin_unlock(&ctx->dma.lock); |
| |
| if (buf) { |
| buf->vb.vb2_buf.timestamp = ktime_get_ns(); |
| buf->vb.field = ctx->v_fmt.fmt.pix.field; |
| buf->vb.sequence = ctx->sequence++; |
| vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE); |
| } |
| } |
| |
| static irqreturn_t cal_irq(int irq_cal, void *data) |
| { |
| struct cal_dev *cal = data; |
| u32 status; |
| |
| status = cal_read(cal, CAL_HL_IRQSTATUS(0)); |
| if (status) { |
| unsigned int i; |
| |
| cal_write(cal, CAL_HL_IRQSTATUS(0), status); |
| |
| if (status & CAL_HL_IRQ_OCPO_ERR_MASK) |
| dev_err_ratelimited(cal->dev, "OCPO ERROR\n"); |
| |
| for (i = 0; i < cal->data->num_csi2_phy; ++i) { |
| if (status & CAL_HL_IRQ_CIO_MASK(i)) { |
| u32 cio_stat = cal_read(cal, |
| CAL_CSI2_COMPLEXIO_IRQSTATUS(i)); |
| |
| dev_err_ratelimited(cal->dev, |
| "CIO%u error: %#08x\n", i, cio_stat); |
| |
| cal_write(cal, CAL_CSI2_COMPLEXIO_IRQSTATUS(i), |
| cio_stat); |
| } |
| |
| if (status & CAL_HL_IRQ_VC_MASK(i)) { |
| u32 vc_stat = cal_read(cal, CAL_CSI2_VC_IRQSTATUS(i)); |
| |
| dev_err_ratelimited(cal->dev, |
| "CIO%u VC error: %#08x\n", |
| i, vc_stat); |
| |
| cal_write(cal, CAL_CSI2_VC_IRQSTATUS(i), vc_stat); |
| } |
| } |
| } |
| |
| /* Check which DMA just finished */ |
| status = cal_read(cal, CAL_HL_IRQSTATUS(1)); |
| if (status) { |
| unsigned int i; |
| |
| /* Clear Interrupt status */ |
| cal_write(cal, CAL_HL_IRQSTATUS(1), status); |
| |
| for (i = 0; i < cal->num_contexts; ++i) { |
| if (status & CAL_HL_IRQ_WDMA_END_MASK(i)) |
| cal_irq_wdma_end(cal->ctx[i]); |
| } |
| } |
| |
| /* Check which DMA just started */ |
| status = cal_read(cal, CAL_HL_IRQSTATUS(2)); |
| if (status) { |
| unsigned int i; |
| |
| /* Clear Interrupt status */ |
| cal_write(cal, CAL_HL_IRQSTATUS(2), status); |
| |
| for (i = 0; i < cal->num_contexts; ++i) { |
| if (status & CAL_HL_IRQ_WDMA_START_MASK(i)) |
| cal_irq_wdma_start(cal->ctx[i]); |
| } |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* ------------------------------------------------------------------ |
| * Asynchronous V4L2 subdev binding |
| * ------------------------------------------------------------------ |
| */ |
| |
| struct cal_v4l2_async_subdev { |
| struct v4l2_async_subdev asd; /* Must be first */ |
| struct cal_camerarx *phy; |
| }; |
| |
| static inline struct cal_v4l2_async_subdev * |
| to_cal_asd(struct v4l2_async_subdev *asd) |
| { |
| return container_of(asd, struct cal_v4l2_async_subdev, asd); |
| } |
| |
| static int cal_async_notifier_bound(struct v4l2_async_notifier *notifier, |
| struct v4l2_subdev *subdev, |
| struct v4l2_async_subdev *asd) |
| { |
| struct cal_camerarx *phy = to_cal_asd(asd)->phy; |
| int pad; |
| int ret; |
| |
| if (phy->source) { |
| phy_info(phy, "Rejecting subdev %s (Already set!!)", |
| subdev->name); |
| return 0; |
| } |
| |
| phy->source = subdev; |
| phy_dbg(1, phy, "Using source %s for capture\n", subdev->name); |
| |
| pad = media_entity_get_fwnode_pad(&subdev->entity, |
| of_fwnode_handle(phy->source_ep_node), |
| MEDIA_PAD_FL_SOURCE); |
| if (pad < 0) { |
| phy_err(phy, "Source %s has no connected source pad\n", |
| subdev->name); |
| return pad; |
| } |
| |
| ret = media_create_pad_link(&subdev->entity, pad, |
| &phy->subdev.entity, CAL_CAMERARX_PAD_SINK, |
| MEDIA_LNK_FL_IMMUTABLE | |
| MEDIA_LNK_FL_ENABLED); |
| if (ret) { |
| phy_err(phy, "Failed to create media link for source %s\n", |
| subdev->name); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int cal_async_notifier_complete(struct v4l2_async_notifier *notifier) |
| { |
| struct cal_dev *cal = container_of(notifier, struct cal_dev, notifier); |
| unsigned int i; |
| int ret; |
| |
| for (i = 0; i < cal->num_contexts; ++i) { |
| ret = cal_ctx_v4l2_register(cal->ctx[i]); |
| if (ret) |
| goto err_ctx_unreg; |
| } |
| |
| if (!cal_mc_api) |
| return 0; |
| |
| ret = v4l2_device_register_subdev_nodes(&cal->v4l2_dev); |
| if (ret) |
| goto err_ctx_unreg; |
| |
| return 0; |
| |
| err_ctx_unreg: |
| for (; i > 0; --i) { |
| if (!cal->ctx[i - 1]) |
| continue; |
| |
| cal_ctx_v4l2_unregister(cal->ctx[i - 1]); |
| } |
| |
| return ret; |
| } |
| |
| static const struct v4l2_async_notifier_operations cal_async_notifier_ops = { |
| .bound = cal_async_notifier_bound, |
| .complete = cal_async_notifier_complete, |
| }; |
| |
| static int cal_async_notifier_register(struct cal_dev *cal) |
| { |
| unsigned int i; |
| int ret; |
| |
| v4l2_async_nf_init(&cal->notifier); |
| cal->notifier.ops = &cal_async_notifier_ops; |
| |
| for (i = 0; i < cal->data->num_csi2_phy; ++i) { |
| struct cal_camerarx *phy = cal->phy[i]; |
| struct cal_v4l2_async_subdev *casd; |
| struct fwnode_handle *fwnode; |
| |
| if (!phy->source_node) |
| continue; |
| |
| fwnode = of_fwnode_handle(phy->source_node); |
| casd = v4l2_async_nf_add_fwnode(&cal->notifier, |
| fwnode, |
| struct cal_v4l2_async_subdev); |
| if (IS_ERR(casd)) { |
| phy_err(phy, "Failed to add subdev to notifier\n"); |
| ret = PTR_ERR(casd); |
| goto error; |
| } |
| |
| casd->phy = phy; |
| } |
| |
| ret = v4l2_async_nf_register(&cal->v4l2_dev, &cal->notifier); |
| if (ret) { |
| cal_err(cal, "Error registering async notifier\n"); |
| goto error; |
| } |
| |
| return 0; |
| |
| error: |
| v4l2_async_nf_cleanup(&cal->notifier); |
| return ret; |
| } |
| |
| static void cal_async_notifier_unregister(struct cal_dev *cal) |
| { |
| v4l2_async_nf_unregister(&cal->notifier); |
| v4l2_async_nf_cleanup(&cal->notifier); |
| } |
| |
| /* ------------------------------------------------------------------ |
| * Media and V4L2 device handling |
| * ------------------------------------------------------------------ |
| */ |
| |
| /* |
| * Register user-facing devices. To be called at the end of the probe function |
| * when all resources are initialized and ready. |
| */ |
| static int cal_media_register(struct cal_dev *cal) |
| { |
| int ret; |
| |
| ret = media_device_register(&cal->mdev); |
| if (ret) { |
| cal_err(cal, "Failed to register media device\n"); |
| return ret; |
| } |
| |
| /* |
| * Register the async notifier. This may trigger registration of the |
| * V4L2 video devices if all subdevs are ready. |
| */ |
| ret = cal_async_notifier_register(cal); |
| if (ret) { |
| media_device_unregister(&cal->mdev); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Unregister the user-facing devices, but don't free memory yet. To be called |
| * at the beginning of the remove function, to disallow access from userspace. |
| */ |
| static void cal_media_unregister(struct cal_dev *cal) |
| { |
| unsigned int i; |
| |
| /* Unregister all the V4L2 video devices. */ |
| for (i = 0; i < cal->num_contexts; i++) |
| cal_ctx_v4l2_unregister(cal->ctx[i]); |
| |
| cal_async_notifier_unregister(cal); |
| media_device_unregister(&cal->mdev); |
| } |
| |
| /* |
| * Initialize the in-kernel objects. To be called at the beginning of the probe |
| * function, before the V4L2 device is used by the driver. |
| */ |
| static int cal_media_init(struct cal_dev *cal) |
| { |
| struct media_device *mdev = &cal->mdev; |
| int ret; |
| |
| mdev->dev = cal->dev; |
| mdev->hw_revision = cal->revision; |
| strscpy(mdev->model, "CAL", sizeof(mdev->model)); |
| snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s", |
| dev_name(mdev->dev)); |
| media_device_init(mdev); |
| |
| /* |
| * Initialize the V4L2 device (despite the function name, this performs |
| * initialization, not registration). |
| */ |
| cal->v4l2_dev.mdev = mdev; |
| ret = v4l2_device_register(cal->dev, &cal->v4l2_dev); |
| if (ret) { |
| cal_err(cal, "Failed to register V4L2 device\n"); |
| return ret; |
| } |
| |
| vb2_dma_contig_set_max_seg_size(cal->dev, DMA_BIT_MASK(32)); |
| |
| return 0; |
| } |
| |
| /* |
| * Cleanup the in-kernel objects, freeing memory. To be called at the very end |
| * of the remove sequence, when nothing (including userspace) can access the |
| * objects anymore. |
| */ |
| static void cal_media_cleanup(struct cal_dev *cal) |
| { |
| v4l2_device_unregister(&cal->v4l2_dev); |
| media_device_cleanup(&cal->mdev); |
| |
| vb2_dma_contig_clear_max_seg_size(cal->dev); |
| } |
| |
| /* ------------------------------------------------------------------ |
| * Initialization and module stuff |
| * ------------------------------------------------------------------ |
| */ |
| |
| static struct cal_ctx *cal_ctx_create(struct cal_dev *cal, int inst) |
| { |
| struct cal_ctx *ctx; |
| int ret; |
| |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return NULL; |
| |
| ctx->cal = cal; |
| ctx->phy = cal->phy[inst]; |
| ctx->dma_ctx = inst; |
| ctx->csi2_ctx = inst; |
| ctx->cport = inst; |
| ctx->vc = 0; |
| ctx->datatype = CAL_CSI2_CTX_DT_ANY; |
| |
| ret = cal_ctx_v4l2_init(ctx); |
| if (ret) |
| return NULL; |
| |
| return ctx; |
| } |
| |
| static void cal_ctx_destroy(struct cal_ctx *ctx) |
| { |
| cal_ctx_v4l2_cleanup(ctx); |
| |
| kfree(ctx); |
| } |
| |
| static const struct of_device_id cal_of_match[] = { |
| { |
| .compatible = "ti,dra72-cal", |
| .data = (void *)&dra72x_cal_data, |
| }, |
| { |
| .compatible = "ti,dra72-pre-es2-cal", |
| .data = (void *)&dra72x_es1_cal_data, |
| }, |
| { |
| .compatible = "ti,dra76-cal", |
| .data = (void *)&dra76x_cal_data, |
| }, |
| { |
| .compatible = "ti,am654-cal", |
| .data = (void *)&am654_cal_data, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, cal_of_match); |
| |
| /* Get hardware revision and info. */ |
| |
| #define CAL_HL_HWINFO_VALUE 0xa3c90469 |
| |
| static void cal_get_hwinfo(struct cal_dev *cal) |
| { |
| u32 hwinfo; |
| |
| cal->revision = cal_read(cal, CAL_HL_REVISION); |
| switch (FIELD_GET(CAL_HL_REVISION_SCHEME_MASK, cal->revision)) { |
| case CAL_HL_REVISION_SCHEME_H08: |
| cal_dbg(3, cal, "CAL HW revision %lu.%lu.%lu (0x%08x)\n", |
| FIELD_GET(CAL_HL_REVISION_MAJOR_MASK, cal->revision), |
| FIELD_GET(CAL_HL_REVISION_MINOR_MASK, cal->revision), |
| FIELD_GET(CAL_HL_REVISION_RTL_MASK, cal->revision), |
| cal->revision); |
| break; |
| |
| case CAL_HL_REVISION_SCHEME_LEGACY: |
| default: |
| cal_info(cal, "Unexpected CAL HW revision 0x%08x\n", |
| cal->revision); |
| break; |
| } |
| |
| hwinfo = cal_read(cal, CAL_HL_HWINFO); |
| if (hwinfo != CAL_HL_HWINFO_VALUE) |
| cal_info(cal, "CAL_HL_HWINFO = 0x%08x, expected 0x%08x\n", |
| hwinfo, CAL_HL_HWINFO_VALUE); |
| } |
| |
| static int cal_init_camerarx_regmap(struct cal_dev *cal) |
| { |
| struct platform_device *pdev = to_platform_device(cal->dev); |
| struct device_node *np = cal->dev->of_node; |
| struct regmap_config config = { }; |
| struct regmap *syscon; |
| struct resource *res; |
| unsigned int offset; |
| void __iomem *base; |
| |
| syscon = syscon_regmap_lookup_by_phandle_args(np, "ti,camerrx-control", |
| 1, &offset); |
| if (!IS_ERR(syscon)) { |
| cal->syscon_camerrx = syscon; |
| cal->syscon_camerrx_offset = offset; |
| return 0; |
| } |
| |
| dev_warn(cal->dev, "failed to get ti,camerrx-control: %ld\n", |
| PTR_ERR(syscon)); |
| |
| /* |
| * Backward DTS compatibility. If syscon entry is not present then |
| * check if the camerrx_control resource is present. |
| */ |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "camerrx_control"); |
| base = devm_ioremap_resource(cal->dev, res); |
| if (IS_ERR(base)) { |
| cal_err(cal, "failed to ioremap camerrx_control\n"); |
| return PTR_ERR(base); |
| } |
| |
| cal_dbg(1, cal, "ioresource %s at %pa - %pa\n", |
| res->name, &res->start, &res->end); |
| |
| config.reg_bits = 32; |
| config.reg_stride = 4; |
| config.val_bits = 32; |
| config.max_register = resource_size(res) - 4; |
| |
| syscon = regmap_init_mmio(NULL, base, &config); |
| if (IS_ERR(syscon)) { |
| pr_err("regmap init failed\n"); |
| return PTR_ERR(syscon); |
| } |
| |
| /* |
| * In this case the base already point to the direct CM register so no |
| * need for an offset. |
| */ |
| cal->syscon_camerrx = syscon; |
| cal->syscon_camerrx_offset = 0; |
| |
| return 0; |
| } |
| |
| static int cal_probe(struct platform_device *pdev) |
| { |
| struct cal_dev *cal; |
| bool connected = false; |
| unsigned int i; |
| int ret; |
| int irq; |
| |
| cal = devm_kzalloc(&pdev->dev, sizeof(*cal), GFP_KERNEL); |
| if (!cal) |
| return -ENOMEM; |
| |
| cal->data = of_device_get_match_data(&pdev->dev); |
| if (!cal->data) { |
| dev_err(&pdev->dev, "Could not get feature data based on compatible version\n"); |
| return -ENODEV; |
| } |
| |
| cal->dev = &pdev->dev; |
| platform_set_drvdata(pdev, cal); |
| |
| /* Acquire resources: clocks, CAMERARX regmap, I/O memory and IRQ. */ |
| cal->fclk = devm_clk_get(&pdev->dev, "fck"); |
| if (IS_ERR(cal->fclk)) { |
| dev_err(&pdev->dev, "cannot get CAL fclk\n"); |
| return PTR_ERR(cal->fclk); |
| } |
| |
| ret = cal_init_camerarx_regmap(cal); |
| if (ret < 0) |
| return ret; |
| |
| cal->res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "cal_top"); |
| cal->base = devm_ioremap_resource(&pdev->dev, cal->res); |
| if (IS_ERR(cal->base)) |
| return PTR_ERR(cal->base); |
| |
| cal_dbg(1, cal, "ioresource %s at %pa - %pa\n", |
| cal->res->name, &cal->res->start, &cal->res->end); |
| |
| irq = platform_get_irq(pdev, 0); |
| cal_dbg(1, cal, "got irq# %d\n", irq); |
| ret = devm_request_irq(&pdev->dev, irq, cal_irq, 0, CAL_MODULE_NAME, |
| cal); |
| if (ret) |
| return ret; |
| |
| /* Read the revision and hardware info to verify hardware access. */ |
| pm_runtime_enable(&pdev->dev); |
| ret = pm_runtime_resume_and_get(&pdev->dev); |
| if (ret) |
| goto error_pm_runtime; |
| |
| cal_get_hwinfo(cal); |
| pm_runtime_put_sync(&pdev->dev); |
| |
| /* Initialize the media device. */ |
| ret = cal_media_init(cal); |
| if (ret < 0) |
| goto error_pm_runtime; |
| |
| /* Create CAMERARX PHYs. */ |
| for (i = 0; i < cal->data->num_csi2_phy; ++i) { |
| cal->phy[i] = cal_camerarx_create(cal, i); |
| if (IS_ERR(cal->phy[i])) { |
| ret = PTR_ERR(cal->phy[i]); |
| cal->phy[i] = NULL; |
| goto error_camerarx; |
| } |
| |
| if (cal->phy[i]->source_node) |
| connected = true; |
| } |
| |
| if (!connected) { |
| cal_err(cal, "Neither port is configured, no point in staying up\n"); |
| ret = -ENODEV; |
| goto error_camerarx; |
| } |
| |
| /* Create contexts. */ |
| for (i = 0; i < cal->data->num_csi2_phy; ++i) { |
| if (!cal->phy[i]->source_node) |
| continue; |
| |
| cal->ctx[cal->num_contexts] = cal_ctx_create(cal, i); |
| if (!cal->ctx[cal->num_contexts]) { |
| cal_err(cal, "Failed to create context %u\n", cal->num_contexts); |
| ret = -ENODEV; |
| goto error_context; |
| } |
| |
| cal->num_contexts++; |
| } |
| |
| /* Register the media device. */ |
| ret = cal_media_register(cal); |
| if (ret) |
| goto error_context; |
| |
| return 0; |
| |
| error_context: |
| for (i = 0; i < cal->num_contexts; i++) |
| cal_ctx_destroy(cal->ctx[i]); |
| |
| error_camerarx: |
| for (i = 0; i < cal->data->num_csi2_phy; i++) |
| cal_camerarx_destroy(cal->phy[i]); |
| |
| cal_media_cleanup(cal); |
| |
| error_pm_runtime: |
| pm_runtime_disable(&pdev->dev); |
| |
| return ret; |
| } |
| |
| static int cal_remove(struct platform_device *pdev) |
| { |
| struct cal_dev *cal = platform_get_drvdata(pdev); |
| unsigned int i; |
| int ret; |
| |
| cal_dbg(1, cal, "Removing %s\n", CAL_MODULE_NAME); |
| |
| ret = pm_runtime_resume_and_get(&pdev->dev); |
| |
| cal_media_unregister(cal); |
| |
| for (i = 0; i < cal->data->num_csi2_phy; i++) |
| cal_camerarx_disable(cal->phy[i]); |
| |
| for (i = 0; i < cal->num_contexts; i++) |
| cal_ctx_destroy(cal->ctx[i]); |
| |
| for (i = 0; i < cal->data->num_csi2_phy; i++) |
| cal_camerarx_destroy(cal->phy[i]); |
| |
| cal_media_cleanup(cal); |
| |
| if (ret >= 0) |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static int cal_runtime_resume(struct device *dev) |
| { |
| struct cal_dev *cal = dev_get_drvdata(dev); |
| unsigned int i; |
| u32 val; |
| |
| if (cal->data->flags & DRA72_CAL_PRE_ES2_LDO_DISABLE) { |
| /* |
| * Apply errata on both port everytime we (re-)enable |
| * the clock |
| */ |
| for (i = 0; i < cal->data->num_csi2_phy; i++) |
| cal_camerarx_i913_errata(cal->phy[i]); |
| } |
| |
| /* |
| * Enable global interrupts that are not related to a particular |
| * CAMERARAX or context. |
| */ |
| cal_write(cal, CAL_HL_IRQENABLE_SET(0), CAL_HL_IRQ_OCPO_ERR_MASK); |
| |
| val = cal_read(cal, CAL_CTRL); |
| cal_set_field(&val, CAL_CTRL_BURSTSIZE_BURST128, |
| CAL_CTRL_BURSTSIZE_MASK); |
| cal_set_field(&val, 0xf, CAL_CTRL_TAGCNT_MASK); |
| cal_set_field(&val, CAL_CTRL_POSTED_WRITES_NONPOSTED, |
| CAL_CTRL_POSTED_WRITES_MASK); |
| cal_set_field(&val, 0xff, CAL_CTRL_MFLAGL_MASK); |
| cal_set_field(&val, 0xff, CAL_CTRL_MFLAGH_MASK); |
| cal_write(cal, CAL_CTRL, val); |
| cal_dbg(3, cal, "CAL_CTRL = 0x%08x\n", cal_read(cal, CAL_CTRL)); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops cal_pm_ops = { |
| .runtime_resume = cal_runtime_resume, |
| }; |
| |
| static struct platform_driver cal_pdrv = { |
| .probe = cal_probe, |
| .remove = cal_remove, |
| .driver = { |
| .name = CAL_MODULE_NAME, |
| .pm = &cal_pm_ops, |
| .of_match_table = cal_of_match, |
| }, |
| }; |
| |
| module_platform_driver(cal_pdrv); |