| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * STMicroelectronics hts221 sensor driver |
| * |
| * Copyright 2016 STMicroelectronics Inc. |
| * |
| * Lorenzo Bianconi <lorenzo.bianconi@st.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/regmap.h> |
| #include <linux/bitfield.h> |
| |
| #include "hts221.h" |
| |
| #define HTS221_REG_WHOAMI_ADDR 0x0f |
| #define HTS221_REG_WHOAMI_VAL 0xbc |
| |
| #define HTS221_REG_CNTRL1_ADDR 0x20 |
| #define HTS221_REG_CNTRL2_ADDR 0x21 |
| |
| #define HTS221_ODR_MASK 0x03 |
| #define HTS221_BDU_MASK BIT(2) |
| #define HTS221_ENABLE_MASK BIT(7) |
| |
| /* calibration registers */ |
| #define HTS221_REG_0RH_CAL_X_H 0x36 |
| #define HTS221_REG_1RH_CAL_X_H 0x3a |
| #define HTS221_REG_0RH_CAL_Y_H 0x30 |
| #define HTS221_REG_1RH_CAL_Y_H 0x31 |
| #define HTS221_REG_0T_CAL_X_L 0x3c |
| #define HTS221_REG_1T_CAL_X_L 0x3e |
| #define HTS221_REG_0T_CAL_Y_H 0x32 |
| #define HTS221_REG_1T_CAL_Y_H 0x33 |
| #define HTS221_REG_T1_T0_CAL_Y_H 0x35 |
| |
| struct hts221_odr { |
| u8 hz; |
| u8 val; |
| }; |
| |
| #define HTS221_AVG_DEPTH 8 |
| struct hts221_avg { |
| u8 addr; |
| u8 mask; |
| u16 avg_avl[HTS221_AVG_DEPTH]; |
| }; |
| |
| static const struct hts221_odr hts221_odr_table[] = { |
| { 1, 0x01 }, /* 1Hz */ |
| { 7, 0x02 }, /* 7Hz */ |
| { 13, 0x03 }, /* 12.5Hz */ |
| }; |
| |
| static const struct hts221_avg hts221_avg_list[] = { |
| { |
| .addr = 0x10, |
| .mask = 0x07, |
| .avg_avl = { |
| 4, /* 0.4 %RH */ |
| 8, /* 0.3 %RH */ |
| 16, /* 0.2 %RH */ |
| 32, /* 0.15 %RH */ |
| 64, /* 0.1 %RH */ |
| 128, /* 0.07 %RH */ |
| 256, /* 0.05 %RH */ |
| 512, /* 0.03 %RH */ |
| }, |
| }, |
| { |
| .addr = 0x10, |
| .mask = 0x38, |
| .avg_avl = { |
| 2, /* 0.08 degC */ |
| 4, /* 0.05 degC */ |
| 8, /* 0.04 degC */ |
| 16, /* 0.03 degC */ |
| 32, /* 0.02 degC */ |
| 64, /* 0.015 degC */ |
| 128, /* 0.01 degC */ |
| 256, /* 0.007 degC */ |
| }, |
| }, |
| }; |
| |
| static const struct iio_chan_spec hts221_channels[] = { |
| { |
| .type = IIO_HUMIDITYRELATIVE, |
| .address = 0x28, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_OFFSET) | |
| BIT(IIO_CHAN_INFO_SCALE) | |
| BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), |
| .scan_index = 0, |
| .scan_type = { |
| .sign = 's', |
| .realbits = 16, |
| .storagebits = 16, |
| .endianness = IIO_LE, |
| }, |
| }, |
| { |
| .type = IIO_TEMP, |
| .address = 0x2a, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_OFFSET) | |
| BIT(IIO_CHAN_INFO_SCALE) | |
| BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), |
| .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), |
| .scan_index = 1, |
| .scan_type = { |
| .sign = 's', |
| .realbits = 16, |
| .storagebits = 16, |
| .endianness = IIO_LE, |
| }, |
| }, |
| IIO_CHAN_SOFT_TIMESTAMP(2), |
| }; |
| |
| static int hts221_check_whoami(struct hts221_hw *hw) |
| { |
| int err, data; |
| |
| err = regmap_read(hw->regmap, HTS221_REG_WHOAMI_ADDR, &data); |
| if (err < 0) { |
| dev_err(hw->dev, "failed to read whoami register\n"); |
| return err; |
| } |
| |
| if (data != HTS221_REG_WHOAMI_VAL) { |
| dev_err(hw->dev, "wrong whoami {%02x vs %02x}\n", |
| data, HTS221_REG_WHOAMI_VAL); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int hts221_update_odr(struct hts221_hw *hw, u8 odr) |
| { |
| int i, err; |
| |
| for (i = 0; i < ARRAY_SIZE(hts221_odr_table); i++) |
| if (hts221_odr_table[i].hz == odr) |
| break; |
| |
| if (i == ARRAY_SIZE(hts221_odr_table)) |
| return -EINVAL; |
| |
| err = regmap_update_bits(hw->regmap, HTS221_REG_CNTRL1_ADDR, |
| HTS221_ODR_MASK, |
| FIELD_PREP(HTS221_ODR_MASK, |
| hts221_odr_table[i].val)); |
| if (err < 0) |
| return err; |
| |
| hw->odr = odr; |
| |
| return 0; |
| } |
| |
| static int hts221_update_avg(struct hts221_hw *hw, |
| enum hts221_sensor_type type, |
| u16 val) |
| { |
| const struct hts221_avg *avg = &hts221_avg_list[type]; |
| int i, err, data; |
| |
| for (i = 0; i < HTS221_AVG_DEPTH; i++) |
| if (avg->avg_avl[i] == val) |
| break; |
| |
| if (i == HTS221_AVG_DEPTH) |
| return -EINVAL; |
| |
| data = ((i << __ffs(avg->mask)) & avg->mask); |
| err = regmap_update_bits(hw->regmap, avg->addr, |
| avg->mask, data); |
| if (err < 0) |
| return err; |
| |
| hw->sensors[type].cur_avg_idx = i; |
| |
| return 0; |
| } |
| |
| static ssize_t hts221_sysfs_sampling_freq(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| int i; |
| ssize_t len = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(hts221_odr_table); i++) |
| len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", |
| hts221_odr_table[i].hz); |
| buf[len - 1] = '\n'; |
| |
| return len; |
| } |
| |
| static ssize_t |
| hts221_sysfs_rh_oversampling_avail(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| const struct hts221_avg *avg = &hts221_avg_list[HTS221_SENSOR_H]; |
| ssize_t len = 0; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(avg->avg_avl); i++) |
| len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", |
| avg->avg_avl[i]); |
| buf[len - 1] = '\n'; |
| |
| return len; |
| } |
| |
| static ssize_t |
| hts221_sysfs_temp_oversampling_avail(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| const struct hts221_avg *avg = &hts221_avg_list[HTS221_SENSOR_T]; |
| ssize_t len = 0; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(avg->avg_avl); i++) |
| len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", |
| avg->avg_avl[i]); |
| buf[len - 1] = '\n'; |
| |
| return len; |
| } |
| |
| int hts221_set_enable(struct hts221_hw *hw, bool enable) |
| { |
| int err; |
| |
| err = regmap_update_bits(hw->regmap, HTS221_REG_CNTRL1_ADDR, |
| HTS221_ENABLE_MASK, |
| FIELD_PREP(HTS221_ENABLE_MASK, enable)); |
| if (err < 0) |
| return err; |
| |
| hw->enabled = enable; |
| |
| return 0; |
| } |
| |
| static int hts221_parse_temp_caldata(struct hts221_hw *hw) |
| { |
| int err, *slope, *b_gen, cal0, cal1; |
| s16 cal_x0, cal_x1, cal_y0, cal_y1; |
| __le16 val; |
| |
| err = regmap_read(hw->regmap, HTS221_REG_0T_CAL_Y_H, &cal0); |
| if (err < 0) |
| return err; |
| |
| err = regmap_read(hw->regmap, HTS221_REG_T1_T0_CAL_Y_H, &cal1); |
| if (err < 0) |
| return err; |
| cal_y0 = ((cal1 & 0x3) << 8) | cal0; |
| |
| err = regmap_read(hw->regmap, HTS221_REG_1T_CAL_Y_H, &cal0); |
| if (err < 0) |
| return err; |
| cal_y1 = (((cal1 & 0xc) >> 2) << 8) | cal0; |
| |
| err = regmap_bulk_read(hw->regmap, HTS221_REG_0T_CAL_X_L, |
| &val, sizeof(val)); |
| if (err < 0) |
| return err; |
| cal_x0 = le16_to_cpu(val); |
| |
| err = regmap_bulk_read(hw->regmap, HTS221_REG_1T_CAL_X_L, |
| &val, sizeof(val)); |
| if (err < 0) |
| return err; |
| cal_x1 = le16_to_cpu(val); |
| |
| slope = &hw->sensors[HTS221_SENSOR_T].slope; |
| b_gen = &hw->sensors[HTS221_SENSOR_T].b_gen; |
| |
| *slope = ((cal_y1 - cal_y0) * 8000) / (cal_x1 - cal_x0); |
| *b_gen = (((s32)cal_x1 * cal_y0 - (s32)cal_x0 * cal_y1) * 1000) / |
| (cal_x1 - cal_x0); |
| *b_gen *= 8; |
| |
| return 0; |
| } |
| |
| static int hts221_parse_rh_caldata(struct hts221_hw *hw) |
| { |
| int err, *slope, *b_gen, data; |
| s16 cal_x0, cal_x1, cal_y0, cal_y1; |
| __le16 val; |
| |
| err = regmap_read(hw->regmap, HTS221_REG_0RH_CAL_Y_H, &data); |
| if (err < 0) |
| return err; |
| cal_y0 = data; |
| |
| err = regmap_read(hw->regmap, HTS221_REG_1RH_CAL_Y_H, &data); |
| if (err < 0) |
| return err; |
| cal_y1 = data; |
| |
| err = regmap_bulk_read(hw->regmap, HTS221_REG_0RH_CAL_X_H, |
| &val, sizeof(val)); |
| if (err < 0) |
| return err; |
| cal_x0 = le16_to_cpu(val); |
| |
| err = regmap_bulk_read(hw->regmap, HTS221_REG_1RH_CAL_X_H, |
| &val, sizeof(val)); |
| if (err < 0) |
| return err; |
| cal_x1 = le16_to_cpu(val); |
| |
| slope = &hw->sensors[HTS221_SENSOR_H].slope; |
| b_gen = &hw->sensors[HTS221_SENSOR_H].b_gen; |
| |
| *slope = ((cal_y1 - cal_y0) * 8000) / (cal_x1 - cal_x0); |
| *b_gen = (((s32)cal_x1 * cal_y0 - (s32)cal_x0 * cal_y1) * 1000) / |
| (cal_x1 - cal_x0); |
| *b_gen *= 8; |
| |
| return 0; |
| } |
| |
| static int hts221_get_sensor_scale(struct hts221_hw *hw, |
| enum iio_chan_type ch_type, |
| int *val, int *val2) |
| { |
| s64 tmp; |
| s32 rem, div, data; |
| |
| switch (ch_type) { |
| case IIO_HUMIDITYRELATIVE: |
| data = hw->sensors[HTS221_SENSOR_H].slope; |
| div = (1 << 4) * 1000; |
| break; |
| case IIO_TEMP: |
| data = hw->sensors[HTS221_SENSOR_T].slope; |
| div = (1 << 6) * 1000; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| tmp = div_s64(data * 1000000000LL, div); |
| tmp = div_s64_rem(tmp, 1000000000LL, &rem); |
| |
| *val = tmp; |
| *val2 = rem; |
| |
| return IIO_VAL_INT_PLUS_NANO; |
| } |
| |
| static int hts221_get_sensor_offset(struct hts221_hw *hw, |
| enum iio_chan_type ch_type, |
| int *val, int *val2) |
| { |
| s64 tmp; |
| s32 rem, div, data; |
| |
| switch (ch_type) { |
| case IIO_HUMIDITYRELATIVE: |
| data = hw->sensors[HTS221_SENSOR_H].b_gen; |
| div = hw->sensors[HTS221_SENSOR_H].slope; |
| break; |
| case IIO_TEMP: |
| data = hw->sensors[HTS221_SENSOR_T].b_gen; |
| div = hw->sensors[HTS221_SENSOR_T].slope; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| tmp = div_s64(data * 1000000000LL, div); |
| tmp = div_s64_rem(tmp, 1000000000LL, &rem); |
| |
| *val = tmp; |
| *val2 = rem; |
| |
| return IIO_VAL_INT_PLUS_NANO; |
| } |
| |
| static int hts221_read_oneshot(struct hts221_hw *hw, u8 addr, int *val) |
| { |
| __le16 data; |
| int err; |
| |
| err = hts221_set_enable(hw, true); |
| if (err < 0) |
| return err; |
| |
| msleep(50); |
| |
| err = regmap_bulk_read(hw->regmap, addr, &data, sizeof(data)); |
| if (err < 0) |
| return err; |
| |
| hts221_set_enable(hw, false); |
| |
| *val = (s16)le16_to_cpu(data); |
| |
| return IIO_VAL_INT; |
| } |
| |
| static int hts221_read_raw(struct iio_dev *iio_dev, |
| struct iio_chan_spec const *ch, |
| int *val, int *val2, long mask) |
| { |
| struct hts221_hw *hw = iio_priv(iio_dev); |
| int ret; |
| |
| ret = iio_device_claim_direct_mode(iio_dev); |
| if (ret) |
| return ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = hts221_read_oneshot(hw, ch->address, val); |
| break; |
| case IIO_CHAN_INFO_SCALE: |
| ret = hts221_get_sensor_scale(hw, ch->type, val, val2); |
| break; |
| case IIO_CHAN_INFO_OFFSET: |
| ret = hts221_get_sensor_offset(hw, ch->type, val, val2); |
| break; |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| *val = hw->odr; |
| ret = IIO_VAL_INT; |
| break; |
| case IIO_CHAN_INFO_OVERSAMPLING_RATIO: { |
| u8 idx; |
| const struct hts221_avg *avg; |
| |
| switch (ch->type) { |
| case IIO_HUMIDITYRELATIVE: |
| avg = &hts221_avg_list[HTS221_SENSOR_H]; |
| idx = hw->sensors[HTS221_SENSOR_H].cur_avg_idx; |
| *val = avg->avg_avl[idx]; |
| ret = IIO_VAL_INT; |
| break; |
| case IIO_TEMP: |
| avg = &hts221_avg_list[HTS221_SENSOR_T]; |
| idx = hw->sensors[HTS221_SENSOR_T].cur_avg_idx; |
| *val = avg->avg_avl[idx]; |
| ret = IIO_VAL_INT; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| break; |
| } |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| iio_device_release_direct_mode(iio_dev); |
| |
| return ret; |
| } |
| |
| static int hts221_write_raw(struct iio_dev *iio_dev, |
| struct iio_chan_spec const *chan, |
| int val, int val2, long mask) |
| { |
| struct hts221_hw *hw = iio_priv(iio_dev); |
| int ret; |
| |
| ret = iio_device_claim_direct_mode(iio_dev); |
| if (ret) |
| return ret; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_SAMP_FREQ: |
| ret = hts221_update_odr(hw, val); |
| break; |
| case IIO_CHAN_INFO_OVERSAMPLING_RATIO: |
| switch (chan->type) { |
| case IIO_HUMIDITYRELATIVE: |
| ret = hts221_update_avg(hw, HTS221_SENSOR_H, val); |
| break; |
| case IIO_TEMP: |
| ret = hts221_update_avg(hw, HTS221_SENSOR_T, val); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| iio_device_release_direct_mode(iio_dev); |
| |
| return ret; |
| } |
| |
| static int hts221_validate_trigger(struct iio_dev *iio_dev, |
| struct iio_trigger *trig) |
| { |
| struct hts221_hw *hw = iio_priv(iio_dev); |
| |
| return hw->trig == trig ? 0 : -EINVAL; |
| } |
| |
| static IIO_DEVICE_ATTR(in_humidity_oversampling_ratio_available, S_IRUGO, |
| hts221_sysfs_rh_oversampling_avail, NULL, 0); |
| static IIO_DEVICE_ATTR(in_temp_oversampling_ratio_available, S_IRUGO, |
| hts221_sysfs_temp_oversampling_avail, NULL, 0); |
| static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hts221_sysfs_sampling_freq); |
| |
| static struct attribute *hts221_attributes[] = { |
| &iio_dev_attr_sampling_frequency_available.dev_attr.attr, |
| &iio_dev_attr_in_humidity_oversampling_ratio_available.dev_attr.attr, |
| &iio_dev_attr_in_temp_oversampling_ratio_available.dev_attr.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group hts221_attribute_group = { |
| .attrs = hts221_attributes, |
| }; |
| |
| static const struct iio_info hts221_info = { |
| .attrs = &hts221_attribute_group, |
| .read_raw = hts221_read_raw, |
| .write_raw = hts221_write_raw, |
| .validate_trigger = hts221_validate_trigger, |
| }; |
| |
| static const unsigned long hts221_scan_masks[] = {0x3, 0x0}; |
| |
| static int hts221_init_regulators(struct device *dev) |
| { |
| struct iio_dev *iio_dev = dev_get_drvdata(dev); |
| struct hts221_hw *hw = iio_priv(iio_dev); |
| int err; |
| |
| hw->vdd = devm_regulator_get(dev, "vdd"); |
| if (IS_ERR(hw->vdd)) |
| return dev_err_probe(dev, PTR_ERR(hw->vdd), |
| "failed to get vdd regulator\n"); |
| |
| err = regulator_enable(hw->vdd); |
| if (err) { |
| dev_err(dev, "failed to enable vdd regulator: %d\n", err); |
| return err; |
| } |
| |
| msleep(50); |
| |
| return 0; |
| } |
| |
| static void hts221_chip_uninit(void *data) |
| { |
| struct hts221_hw *hw = data; |
| |
| regulator_disable(hw->vdd); |
| } |
| |
| int hts221_probe(struct device *dev, int irq, const char *name, |
| struct regmap *regmap) |
| { |
| struct iio_dev *iio_dev; |
| struct hts221_hw *hw; |
| int err; |
| u8 data; |
| |
| iio_dev = devm_iio_device_alloc(dev, sizeof(*hw)); |
| if (!iio_dev) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, (void *)iio_dev); |
| |
| hw = iio_priv(iio_dev); |
| hw->name = name; |
| hw->dev = dev; |
| hw->irq = irq; |
| hw->regmap = regmap; |
| |
| err = hts221_init_regulators(dev); |
| if (err) |
| return err; |
| |
| err = devm_add_action_or_reset(dev, hts221_chip_uninit, hw); |
| if (err) |
| return err; |
| |
| err = hts221_check_whoami(hw); |
| if (err < 0) |
| return err; |
| |
| iio_dev->modes = INDIO_DIRECT_MODE; |
| iio_dev->available_scan_masks = hts221_scan_masks; |
| iio_dev->channels = hts221_channels; |
| iio_dev->num_channels = ARRAY_SIZE(hts221_channels); |
| iio_dev->name = HTS221_DEV_NAME; |
| iio_dev->info = &hts221_info; |
| |
| /* enable Block Data Update */ |
| err = regmap_update_bits(hw->regmap, HTS221_REG_CNTRL1_ADDR, |
| HTS221_BDU_MASK, |
| FIELD_PREP(HTS221_BDU_MASK, 1)); |
| if (err < 0) |
| return err; |
| |
| err = hts221_update_odr(hw, hts221_odr_table[0].hz); |
| if (err < 0) |
| return err; |
| |
| /* configure humidity sensor */ |
| err = hts221_parse_rh_caldata(hw); |
| if (err < 0) { |
| dev_err(hw->dev, "failed to get rh calibration data\n"); |
| return err; |
| } |
| |
| data = hts221_avg_list[HTS221_SENSOR_H].avg_avl[3]; |
| err = hts221_update_avg(hw, HTS221_SENSOR_H, data); |
| if (err < 0) { |
| dev_err(hw->dev, "failed to set rh oversampling ratio\n"); |
| return err; |
| } |
| |
| /* configure temperature sensor */ |
| err = hts221_parse_temp_caldata(hw); |
| if (err < 0) { |
| dev_err(hw->dev, |
| "failed to get temperature calibration data\n"); |
| return err; |
| } |
| |
| data = hts221_avg_list[HTS221_SENSOR_T].avg_avl[3]; |
| err = hts221_update_avg(hw, HTS221_SENSOR_T, data); |
| if (err < 0) { |
| dev_err(hw->dev, |
| "failed to set temperature oversampling ratio\n"); |
| return err; |
| } |
| |
| if (hw->irq > 0) { |
| err = hts221_allocate_buffers(iio_dev); |
| if (err < 0) |
| return err; |
| |
| err = hts221_allocate_trigger(iio_dev); |
| if (err) |
| return err; |
| } |
| |
| return devm_iio_device_register(hw->dev, iio_dev); |
| } |
| EXPORT_SYMBOL(hts221_probe); |
| |
| static int __maybe_unused hts221_suspend(struct device *dev) |
| { |
| struct iio_dev *iio_dev = dev_get_drvdata(dev); |
| struct hts221_hw *hw = iio_priv(iio_dev); |
| |
| return regmap_update_bits(hw->regmap, HTS221_REG_CNTRL1_ADDR, |
| HTS221_ENABLE_MASK, |
| FIELD_PREP(HTS221_ENABLE_MASK, false)); |
| } |
| |
| static int __maybe_unused hts221_resume(struct device *dev) |
| { |
| struct iio_dev *iio_dev = dev_get_drvdata(dev); |
| struct hts221_hw *hw = iio_priv(iio_dev); |
| int err = 0; |
| |
| if (hw->enabled) |
| err = regmap_update_bits(hw->regmap, HTS221_REG_CNTRL1_ADDR, |
| HTS221_ENABLE_MASK, |
| FIELD_PREP(HTS221_ENABLE_MASK, |
| true)); |
| return err; |
| } |
| |
| const struct dev_pm_ops hts221_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(hts221_suspend, hts221_resume) |
| }; |
| EXPORT_SYMBOL(hts221_pm_ops); |
| |
| MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@st.com>"); |
| MODULE_DESCRIPTION("STMicroelectronics hts221 sensor driver"); |
| MODULE_LICENSE("GPL v2"); |