| What: /sys/bus/iio/devices/iio:deviceX/out_currentY_toggle_en |
| KernelVersion: 5.18 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Toggle enable. Write 1 to enable toggle or 0 to disable it. This |
| is useful when one wants to change the DAC output codes. For |
| autonomous toggling, the way it should be done is: |
| |
| - disable toggle operation; |
| - change out_currentY_rawN, where N is the integer value of the symbol; |
| - enable toggle operation. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/out_currentY_rawN |
| KernelVersion: 5.18 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| This attribute has the same meaning as out_currentY_raw. It is |
| specific to toggle enabled channels and refers to the DAC output |
| code in INPUT_N (_rawN), where N is the integer value of the symbol. |
| The same scale and offset as in out_currentY_raw applies. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/out_currentY_symbol |
| KernelVersion: 5.18 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Performs a SW switch to a predefined output symbol. This attribute |
| is specific to toggle enabled channels and allows switching between |
| multiple predefined symbols. Each symbol corresponds to a different |
| output, denoted as out_currentY_rawN, where N is the integer value |
| of the symbol. Writing an integer value N will select out_currentY_rawN. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en |
| KernelVersion: 5.18 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Toggle enable. Write 1 to enable toggle or 0 to disable it. This |
| is useful when one wants to change the DAC output codes. For |
| autonomous toggling, the way it should be done is: |
| |
| - disable toggle operation; |
| - change out_voltageY_rawN, where N is the integer value of the symbol; |
| - enable toggle operation. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_rawN |
| KernelVersion: 5.18 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| This attribute has the same meaning as out_currentY_raw. It is |
| specific to toggle enabled channels and refers to the DAC output |
| code in INPUT_N (_rawN), where N is the integer value of the symbol. |
| The same scale and offset as in out_currentY_raw applies. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol |
| KernelVersion: 5.18 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Performs a SW switch to a predefined output symbol. This attribute |
| is specific to toggle enabled channels and allows switching between |
| multiple predefined symbols. Each symbol corresponds to a different |
| output, denoted as out_voltageY_rawN, where N is the integer value |
| of the symbol. Writing an integer value N will select out_voltageY_rawN. |
