| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/mtd/mediatek,mtk-nfc.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: MediaTek(MTK) SoCs raw NAND FLASH controller (NFC) |
| |
| maintainers: |
| - Xiangsheng Hou <xiangsheng.hou@mediatek.com> |
| |
| properties: |
| compatible: |
| enum: |
| - mediatek,mt2701-nfc |
| - mediatek,mt2712-nfc |
| - mediatek,mt7622-nfc |
| |
| reg: |
| items: |
| - description: Base physical address and size of NFI. |
| |
| interrupts: |
| items: |
| - description: NFI interrupt |
| |
| clocks: |
| items: |
| - description: clock used for the controller |
| - description: clock used for the pad |
| |
| clock-names: |
| items: |
| - const: nfi_clk |
| - const: pad_clk |
| |
| ecc-engine: |
| description: device-tree node of the required ECC engine. |
| $ref: /schemas/types.yaml#/definitions/phandle |
| |
| patternProperties: |
| "^nand@[a-f0-9]$": |
| $ref: raw-nand-chip.yaml# |
| unevaluatedProperties: false |
| properties: |
| reg: |
| maximum: 1 |
| nand-ecc-mode: |
| const: hw |
| |
| allOf: |
| - $ref: nand-controller.yaml# |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: mediatek,mt2701-nfc |
| then: |
| patternProperties: |
| "^nand@[a-f0-9]$": |
| properties: |
| nand-ecc-step-size: |
| enum: [ 512, 1024 ] |
| nand-ecc-strength: |
| enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36, |
| 40, 44, 48, 52, 56, 60] |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: mediatek,mt2712-nfc |
| then: |
| patternProperties: |
| "^nand@[a-f0-9]$": |
| properties: |
| nand-ecc-step-size: |
| enum: [ 512, 1024 ] |
| nand-ecc-strength: |
| enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36, |
| 40, 44, 48, 52, 56, 60, 68, 72, 80] |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: mediatek,mt7622-nfc |
| then: |
| patternProperties: |
| "^nand@[a-f0-9]$": |
| properties: |
| nand-ecc-step-size: |
| const: 512 |
| nand-ecc-strength: |
| enum: [4, 6, 8, 10, 12] |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| - clocks |
| - clock-names |
| - ecc-engine |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/mt2701-clk.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| soc { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| nand-controller@1100d000 { |
| compatible = "mediatek,mt2701-nfc"; |
| reg = <0 0x1100d000 0 0x1000>; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&pericfg CLK_PERI_NFI>, |
| <&pericfg CLK_PERI_NFI_PAD>; |
| clock-names = "nfi_clk", "pad_clk"; |
| ecc-engine = <&bch>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| nand@0 { |
| reg = <0>; |
| |
| nand-on-flash-bbt; |
| nand-ecc-mode = "hw"; |
| nand-ecc-step-size = <1024>; |
| nand-ecc-strength = <24>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| preloader@0 { |
| label = "pl"; |
| read-only; |
| reg = <0x0 0x400000>; |
| }; |
| android@400000 { |
| label = "android"; |
| reg = <0x400000 0x12c00000>; |
| }; |
| }; |
| }; |
| }; |
| }; |