| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2023 LogicPD, Inc. dba Beacon EmbeddedWorks |
| */ |
| |
| / { |
| aliases { |
| rtc0 = &rtc; |
| rtc1 = &snvs_rtc; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0x0 0x40000000 0 0xc0000000>, |
| <0x1 0x00000000 0 0xc0000000>; |
| }; |
| |
| reg_wl_bt: regulator-wifi-bt { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_wl_bt>; |
| regulator-name = "wl-bt-pow-dwn"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 6 GPIO_ACTIVE_LOW>; |
| startup-delay-us = <70000>; |
| regulator-always-on; |
| }; |
| }; |
| |
| &A53_0 { |
| cpu-supply = <&buck2>; |
| }; |
| |
| &A53_1 { |
| cpu-supply = <&buck2>; |
| }; |
| |
| &A53_2 { |
| cpu-supply = <&buck2>; |
| }; |
| |
| &A53_3 { |
| cpu-supply = <&buck2>; |
| }; |
| |
| &eqos { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_eqos>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy0>; |
| snps,force_thresh_dma_mode; |
| snps,mtl-rx-config = <&mtl_rx_setup>; |
| snps,mtl-tx-config = <&mtl_tx_setup>; |
| status = "okay"; |
| |
| mdio { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@3 { |
| compatible = "ethernet-phy-id0022.1640", |
| "ethernet-phy-ieee802.3-c22"; |
| reg = <3>; |
| reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| |
| mtl_rx_setup: rx-queues-config { |
| snps,rx-queues-to-use = <5>; |
| snps,rx-sched-sp; |
| |
| queue0 { |
| snps,dcb-algorithm; |
| snps,priority = <0x1>; |
| snps,map-to-dma-channel = <0>; |
| }; |
| |
| queue1 { |
| snps,dcb-algorithm; |
| snps,priority = <0x2>; |
| snps,map-to-dma-channel = <1>; |
| }; |
| |
| queue2 { |
| snps,dcb-algorithm; |
| snps,priority = <0x4>; |
| snps,map-to-dma-channel = <2>; |
| }; |
| |
| queue3 { |
| snps,dcb-algorithm; |
| snps,priority = <0x8>; |
| snps,map-to-dma-channel = <3>; |
| }; |
| |
| queue4 { |
| snps,dcb-algorithm; |
| snps,priority = <0xf0>; |
| snps,map-to-dma-channel = <4>; |
| }; |
| }; |
| |
| mtl_tx_setup: tx-queues-config { |
| snps,tx-queues-to-use = <5>; |
| snps,tx-sched-sp; |
| |
| queue0 { |
| snps,dcb-algorithm; |
| snps,priority = <0x1>; |
| }; |
| |
| queue1 { |
| snps,dcb-algorithm; |
| snps,priority = <0x2>; |
| }; |
| |
| queue2 { |
| snps,dcb-algorithm; |
| snps,priority = <0x4>; |
| }; |
| |
| queue3 { |
| snps,dcb-algorithm; |
| snps,priority = <0x8>; |
| }; |
| |
| queue4 { |
| snps,dcb-algorithm; |
| snps,priority = <0xf0>; |
| }; |
| }; |
| }; |
| |
| &flexspi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexspi0>; |
| status = "okay"; |
| |
| flash0: flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <80000000>; |
| spi-tx-bus-width = <1>; |
| spi-rx-bus-width = <4>; |
| }; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| clock-frequency = <384000>; |
| status = "okay"; |
| |
| pmic@25 { |
| compatible = "nxp,pca9450c"; |
| reg = <0x25>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pmic>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <3 IRQ_TYPE_LEVEL_LOW>; |
| |
| regulators { |
| buck1: BUCK1 { |
| regulator-name = "BUCK1"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <2187500>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <3125>; |
| }; |
| |
| buck2: BUCK2 { |
| regulator-name = "BUCK2"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <2187500>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <3125>; |
| nxp,dvs-run-voltage = <950000>; |
| nxp,dvs-standby-voltage = <850000>; |
| }; |
| |
| buck4: BUCK4 { |
| regulator-name = "BUCK4"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buck5: BUCK5 { |
| regulator-name = "BUCK5"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buck6: BUCK6 { |
| regulator-name = "BUCK6"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <3400000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo1: LDO1 { |
| regulator-name = "LDO1"; |
| regulator-min-microvolt = <1600000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo3: LDO3 { |
| regulator-name = "LDO3"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo4: LDO4 { |
| regulator-name = "LDO4"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo5: LDO5 { |
| regulator-name = "LDO5"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| clock-frequency = <384000>; |
| status = "okay"; |
| |
| eeprom@50 { |
| compatible = "atmel,24c64"; |
| reg = <0x50>; |
| pagesize = <32>; |
| read-only; /* Manufacturing EEPROM programmed at factory */ |
| }; |
| |
| rtc: rtc@51 { |
| compatible = "nxp,pcf85263"; |
| reg = <0x51>; |
| }; |
| }; |
| |
| &snvs_pwrkey { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| assigned-clocks = <&clk IMX8MP_CLK_UART1>; |
| assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; |
| uart-has-rtscts; |
| status = "okay"; |
| |
| bluetooth { |
| compatible = "nxp,88w8997-bt"; |
| }; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| bus-width = <4>; |
| vmmc-supply = <®_wl_bt>; |
| cap-sd-highspeed; |
| sd-uhs-sdr50; |
| sd-uhs-sdr104; |
| keep-power-in-suspend; |
| wakeup-source; |
| non-removable; |
| cap-power-off-card; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "okay"; |
| |
| mwifiex: wifi@1 { |
| compatible = "marvell,sd8997"; |
| reg = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wlan>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <9 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| bus-width = <8>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_eqos: eqosgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 |
| MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 |
| MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 |
| MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 |
| MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 |
| MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 |
| MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 |
| MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 |
| MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 |
| MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 |
| MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 |
| MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 |
| MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 |
| MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 |
| MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x10 |
| MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x10 |
| >; |
| }; |
| |
| pinctrl_flexspi0: flexspi0grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2 |
| MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82 |
| MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82 |
| MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82 |
| MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82 |
| MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 |
| MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 |
| MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 |
| >; |
| }; |
| |
| pinctrl_pmic: pmicgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x1c0 |
| >; |
| }; |
| |
| pinctrl_reg_wl_bt: reg-wl-btgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x40 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 |
| MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 |
| MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS 0x140 |
| MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS 0x140 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 |
| MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 |
| MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 |
| MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 |
| MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 |
| MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194 |
| MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4 |
| MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4 |
| MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4 |
| MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4 |
| MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196 |
| MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6 |
| MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6 |
| MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6 |
| MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6 |
| MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 |
| MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 |
| MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 |
| MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 |
| MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 |
| MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 |
| MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 |
| MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 |
| MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 |
| MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 |
| MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 |
| MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 |
| MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 |
| MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 |
| MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 |
| MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 |
| MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 |
| MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 |
| MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 |
| MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 |
| MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 |
| MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 |
| MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 |
| MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 |
| MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 |
| MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 |
| MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 |
| MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 |
| MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 |
| MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 |
| MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 |
| >; |
| }; |
| |
| pinctrl_wlan: wlangrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x140 |
| >; |
| }; |
| }; |
