blob: 2c3984a880af64ceaf3f7ec1a09ceee02f0dffeb [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
*/
/dts-v1/;
#include "rk3399-puma.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Theobroma Systems RK3399-Q7 SoM";
compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
aliases {
mmc1 = &sdmmc;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&haikou_keys_pin>;
pinctrl-names = "default";
button-batlow-n {
gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
label = "BATLOW#";
linux,code = <KEY_BATTERY>;
};
button-slp-btn-n {
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
label = "SLP_BTN#";
linux,code = <KEY_SLEEP>;
};
button-wake-n {
gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
label = "WAKE#";
linux,code = <KEY_WAKEUP>;
wakeup-source;
};
switch-lid-btn-n {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
label = "LID_BTN#";
linux,code = <SW_LID>;
linux,input-type = <EV_SW>;
};
};
leds {
pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
sd_card_led: led-1 {
label = "sd_card_led";
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
};
i2s0-sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,name = "Haikou,I2S-codec";
simple-audio-card,mclk-fs = <512>;
simple-audio-card,codec {
clocks = <&sgtl5000_clk>;
sound-dai = <&sgtl5000>;
};
simple-audio-card,cpu {
bitclock-master;
frame-master;
sound-dai = <&i2s0>;
};
};
sgtl5000_clk: sgtl5000-oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
dc_12v: dc-12v {
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc3v3_baseboard: vcc3v3-baseboard {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_baseboard";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_12v>;
};
vcc5v0_baseboard: vcc5v0-baseboard {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_baseboard";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
vcc5v0_otg: vcc5v0-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc5v0_otg";
regulator-always-on;
};
vdda_codec: vdda-codec {
compatible = "regulator-fixed";
regulator-name = "vdda_codec";
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_baseboard>;
};
vddd_codec: vddd-codec {
compatible = "regulator-fixed";
regulator-name = "vddd_codec";
regulator-boot-on;
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <1600000>;
vin-supply = <&vcc5v0_baseboard>;
};
};
&hdmi {
ddc-i2c-bus = <&i2c3>;
status = "okay";
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
};
&i2c2 {
status = "okay";
clock-frequency = <400000>;
};
&i2c3 {
i2c-scl-rising-time-ns = <450>;
i2c-scl-falling-time-ns = <15>;
status = "okay";
};
&i2c4 {
status = "okay";
clock-frequency = <400000>;
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&sgtl5000_clk>;
#sound-dai-cells = <0>;
VDDA-supply = <&vdda_codec>;
VDDIO-supply = <&vdda_codec>;
VDDD-supply = <&vddd_codec>;
status = "okay";
};
};
&i2c6 {
status = "okay";
clock-frequency = <400000>;
};
&pcie_phy {
status = "okay";
};
&pcie0 {
ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreqn_cpm>;
status = "okay";
};
&pinctrl {
buttons {
haikou_keys_pin: haikou-keys-pin {
rockchip,pins =
/* LID_BTN */
<0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
/* BATLOW# */
<0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
/* SLP_BTN# */
<0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
/* WAKE# */
<0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
sd_card_led_pin: sd-card-led-pin {
rockchip,pins =
<1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb2 {
otg_vbus_drv: otg-vbus-drv {
rockchip,pins =
<0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm0 {
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <40000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
vmmc-supply = <&vcc3v3_baseboard>;
status = "okay";
};
&spi5 {
status = "okay";
};
&tcphy0 {
status = "okay";
};
&u2phy0 {
status = "okay";
};
&usbdrd3_0 {
status = "okay";
};
&usbdrd_dwc3_0 {
dr_mode = "otg";
extcon = <&extcon_usb3>;
status = "okay";
};
&u2phy0_host {
phy-supply = <&vcc5v0_otg>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
status = "okay";
};
&uart2 {
rts-gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};