blob: a5e974ea659e2eb274d5ee65ebbecc61300db164 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
model = "Radxa ROCK3 Model A";
compatible = "radxa,rock3a", "rockchip,rk3568";
aliases {
ethernet0 = &gmac1;
mmc0 = &sdhci;
mmc1 = &sdmmc0;
mmc2 = &sdmmc2;
};
chosen: chosen {
stdout-path = "serial2:1500000n8";
};
hdmi-con {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
gmac1_clkin: external-gmac1-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac1_clkin";
#clock-cells = <0>;
};
leds {
compatible = "gpio-leds";
led_user: led-0 {
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
function = LED_FUNCTION_HEARTBEAT;
color = <LED_COLOR_ID_BLUE>;
linux,default-trigger = "heartbeat";
pinctrl-names = "default";
pinctrl-0 = <&led_user_en>;
};
};
rk809-sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,name = "Analog RK809";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,cpu {
sound-dai = <&i2s1_8ch>;
};
simple-audio-card,codec {
sound-dai = <&rk809>;
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk809 1>;
clock-names = "ext_clock";
pinctrl-names = "default";
pinctrl-0 = <&wifi_enable>;
post-power-on-delay-ms = <100>;
power-off-delay-us = <5000000>;
reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
};
vcc12v_dcin: vcc12v-dcin-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
regulator-always-on;
regulator-boot-on;
};
pcie30_avdd0v9: pcie30-avdd0v9-regulator {
compatible = "regulator-fixed";
regulator-name = "pcie30_avdd0v9";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
vin-supply = <&vcc3v3_sys>;
};
pcie30_avdd1v8: pcie30-avdd1v8-regulator {
compatible = "regulator-fixed";
regulator-name = "pcie30_avdd1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc3v3_sys>;
};
/* pi6c pcie clock generator */
vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_pi6c_03";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
vcc3v3_pcie: vcc3v3-pcie-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_enable_h>;
regulator-name = "vcc3v3_pcie";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
vcc3v3_sys: vcc3v3-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc12v_dcin>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc5v0_usb: vcc5v0-usb-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_usb";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc12v_dcin>;
};
vcc5v0_usb_host: vcc5v0-usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_host_en>;
regulator-name = "vcc5v0_usb_host";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
vcc5v0_usb_hub: vcc5v0-usb-hub-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_hub_en>;
regulator-name = "vcc5v0_usb_hub";
regulator-always-on;
vin-supply = <&vcc5v0_usb>;
};
vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb_otg_en>;
regulator-name = "vcc5v0_usb_otg";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_usb>;
};
vcc_cam: vcc-cam-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc_cam_en>;
regulator-name = "vcc_cam";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc3v3_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_mipi: vcc-mipi-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc_mipi_en>;
regulator-name = "vcc_mipi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc3v3_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&combphy0 {
status = "okay";
};
&combphy1 {
status = "okay";
};
&combphy2 {
status = "okay";
};
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
&cpu1 {
cpu-supply = <&vdd_cpu>;
};
&cpu2 {
cpu-supply = <&vdd_cpu>;
};
&cpu3 {
cpu-supply = <&vdd_cpu>;
};
&gmac1 {
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
clock_in_out = "input";
phy-handle = <&rgmii_phy1>;
phy-mode = "rgmii-id";
phy-supply = <&vcc_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&gmac1m1_miim
&gmac1m1_tx_bus2
&gmac1m1_rx_bus2
&gmac1m1_rgmii_clk
&gmac1m1_clkinout
&gmac1m1_rgmii_bus>;
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
avdd-0v9-supply = <&vdda0v9_image>;
avdd-1v8-supply = <&vcca1v8_image>;
pinctrl-names = "default";
pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm1_cec>;
status = "okay";
};
&hdmi_in {
hdmi_in_vp0: endpoint {
remote-endpoint = <&vp0_out_hdmi>;
};
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&hdmi_sound {
status = "okay";
};
&i2c0 {
status = "okay";
vdd_cpu: regulator@1c {
compatible = "tcs,tcs4525";
reg = <0x1c>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
rk809: pmic@20 {
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
#clock-cells = <1>;
clock-names = "mclk";
clocks = <&cru I2S1_MCLKOUT_TX>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
rockchip,system-power-controller;
#sound-dai-cells = <0>;
vcc1-supply = <&vcc3v3_sys>;
vcc2-supply = <&vcc3v3_sys>;
vcc3-supply = <&vcc3v3_sys>;
vcc4-supply = <&vcc3v3_sys>;
vcc5-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc3v3_sys>;
wakeup-source;
regulators {
vdd_logic: DCDC_REG1 {
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8: DCDC_REG5 {
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_image: LDO_REG1 {
regulator-name = "vdda0v9_image";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda_0v9: LDO_REG2 {
regulator-name = "vdda_0v9";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
regulator-name = "vdda0v9_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
regulator-name = "vccio_acodec";
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
regulator-name = "vcc3v3_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca_1v8: LDO_REG7 {
regulator-name = "vcca_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG8 {
regulator-name = "vcca1v8_pmu";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca1v8_image: LDO_REG9 {
regulator-name = "vcca1v8_image";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3: SWITCH_REG1 {
regulator-name = "vcc_3v3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_sd: SWITCH_REG2 {
regulator-name = "vcc3v3_sd";
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
codec {
mic-in-differential;
};
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3m1_xfer>;
status = "disabled";
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4m1_xfer>;
status = "disabled";
};
&i2c5 {
status = "okay";
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <0>;
clock-output-names = "rtcic_32kout";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
wakeup-source;
};
};
&i2s0_8ch {
status = "okay";
};
&i2s1_8ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
rockchip,trcm-sync-tx-only;
status = "okay";
};
&i2s2_2ch {
rockchip,trcm-sync-tx-only;
status = "okay";
};
&mdio1 {
rgmii_phy1: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0>;
pinctrl-names = "default";
pinctrl-0 = <&eth_phy_rst>;
reset-assert-us = <20000>;
reset-deassert-us = <100000>;
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
};
};
&pcie2x1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_reset_h>;
reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
&pcie30phy {
phy-supply = <&vcc3v3_pi6c_03>;
status = "okay";
};
&pcie3x2 {
pinctrl-names = "default";
pinctrl-0 = <&pcie30x2m1_pins>;
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie>;
status = "okay";
};
&pinctrl {
cam {
vcc_cam_en: vcc_cam_en {
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
display {
vcc_mipi_en: vcc_mipi_en {
rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
ethernet {
eth_phy_rst: eth_phy_rst {
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds {
led_user_en: led_user_en {
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie {
pcie_enable_h: pcie-enable-h {
rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie_reset_h: pcie-reset-h {
rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pmic {
pmic_int: pmic_int {
rockchip,pins =
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb {
vcc5v0_usb_host_en: vcc5v0_usb_host_en {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_usb_hub_en: vcc5v0_usb_hub_en {
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
bt {
bt_enable: bt-enable {
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_host_wake: bt-host-wake {
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
};
bt_wake: bt-wake {
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdio-pwrseq {
wifi_enable: wifi-enable {
rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pmu_io_domains {
pmuio1-supply = <&vcc3v3_pmu>;
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio2-supply = <&vcc_1v8>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_1v8>;
vccio7-supply = <&vcc_3v3>;
status = "okay";
};
&saradc {
vref-supply = <&vcca_1v8>;
status = "okay";
};
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc_1v8>;
status = "okay";
};
&sdmmc0 {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
sd-uhs-sdr50;
vmmc-supply = <&vcc3v3_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&sdmmc2 {
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
cap-sdio-irq;
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sys>;
vqmmc-supply = <&vcc_1v8>;
status = "okay";
};
&tsadc {
rockchip,hw-tshut-mode = <1>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
clocks = <&rk809 1>;
clock-names = "lpo";
device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>;
vbat-supply = <&vcc3v3_sys>;
vddio-supply = <&vcc_1v8>;
/* vddio comes from regulator on module, use IO bank voltage instead */
};
};
&uart2 {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host0_xhci {
extcon = <&usb2phy0>;
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};
&usb_host1_xhci {
status = "okay";
};
&usb2phy0 {
status = "okay";
};
&usb2phy0_host {
phy-supply = <&vcc5v0_usb_host>;
status = "okay";
};
&usb2phy0_otg {
phy-supply = <&vcc5v0_usb_otg>;
status = "okay";
};
&usb2phy1 {
status = "okay";
};
&usb2phy1_host {
phy-supply = <&vcc5v0_usb_host>;
status = "okay";
};
&usb2phy1_otg {
phy-supply = <&vcc5v0_usb_host>;
status = "okay";
};
&vop {
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
status = "okay";
};
&vop_mmu {
status = "okay";
};
&vp0 {
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
remote-endpoint = <&hdmi_in_vp0>;
};
};