| // SPDX-License-Identifier: GPL-2.0+ |
| /* Microchip Sparx5 Switch driver |
| * |
| * Copyright (c) 2021 Microchip Technology Inc. and its subsidiaries. |
| * |
| * The Sparx5 Chip Register Model can be browsed at this location: |
| * https://github.com/microchip-ung/sparx-5_reginfo |
| */ |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/netdevice.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/of.h> |
| #include <linux/of_net.h> |
| #include <linux/of_mdio.h> |
| #include <net/switchdev.h> |
| #include <linux/etherdevice.h> |
| #include <linux/io.h> |
| #include <linux/printk.h> |
| #include <linux/iopoll.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/regmap.h> |
| #include <linux/types.h> |
| #include <linux/reset.h> |
| |
| #include "sparx5_main_regs.h" |
| #include "sparx5_main.h" |
| #include "sparx5_port.h" |
| #include "sparx5_qos.h" |
| |
| #define QLIM_WM(fraction) \ |
| ((SPX5_BUFFER_MEMORY / SPX5_BUFFER_CELL_SZ - 100) * (fraction) / 100) |
| #define IO_RANGES 3 |
| |
| struct initial_port_config { |
| u32 portno; |
| struct device_node *node; |
| struct sparx5_port_config conf; |
| struct phy *serdes; |
| }; |
| |
| struct sparx5_ram_config { |
| void __iomem *init_reg; |
| u32 init_val; |
| }; |
| |
| struct sparx5_main_io_resource { |
| enum sparx5_target id; |
| phys_addr_t offset; |
| int range; |
| }; |
| |
| static const struct sparx5_main_io_resource sparx5_main_iomap[] = { |
| { TARGET_CPU, 0, 0 }, /* 0x600000000 */ |
| { TARGET_FDMA, 0x80000, 0 }, /* 0x600080000 */ |
| { TARGET_PCEP, 0x400000, 0 }, /* 0x600400000 */ |
| { TARGET_DEV2G5, 0x10004000, 1 }, /* 0x610004000 */ |
| { TARGET_DEV5G, 0x10008000, 1 }, /* 0x610008000 */ |
| { TARGET_PCS5G_BR, 0x1000c000, 1 }, /* 0x61000c000 */ |
| { TARGET_DEV2G5 + 1, 0x10010000, 1 }, /* 0x610010000 */ |
| { TARGET_DEV5G + 1, 0x10014000, 1 }, /* 0x610014000 */ |
| { TARGET_PCS5G_BR + 1, 0x10018000, 1 }, /* 0x610018000 */ |
| { TARGET_DEV2G5 + 2, 0x1001c000, 1 }, /* 0x61001c000 */ |
| { TARGET_DEV5G + 2, 0x10020000, 1 }, /* 0x610020000 */ |
| { TARGET_PCS5G_BR + 2, 0x10024000, 1 }, /* 0x610024000 */ |
| { TARGET_DEV2G5 + 6, 0x10028000, 1 }, /* 0x610028000 */ |
| { TARGET_DEV5G + 6, 0x1002c000, 1 }, /* 0x61002c000 */ |
| { TARGET_PCS5G_BR + 6, 0x10030000, 1 }, /* 0x610030000 */ |
| { TARGET_DEV2G5 + 7, 0x10034000, 1 }, /* 0x610034000 */ |
| { TARGET_DEV5G + 7, 0x10038000, 1 }, /* 0x610038000 */ |
| { TARGET_PCS5G_BR + 7, 0x1003c000, 1 }, /* 0x61003c000 */ |
| { TARGET_DEV2G5 + 8, 0x10040000, 1 }, /* 0x610040000 */ |
| { TARGET_DEV5G + 8, 0x10044000, 1 }, /* 0x610044000 */ |
| { TARGET_PCS5G_BR + 8, 0x10048000, 1 }, /* 0x610048000 */ |
| { TARGET_DEV2G5 + 9, 0x1004c000, 1 }, /* 0x61004c000 */ |
| { TARGET_DEV5G + 9, 0x10050000, 1 }, /* 0x610050000 */ |
| { TARGET_PCS5G_BR + 9, 0x10054000, 1 }, /* 0x610054000 */ |
| { TARGET_DEV2G5 + 10, 0x10058000, 1 }, /* 0x610058000 */ |
| { TARGET_DEV5G + 10, 0x1005c000, 1 }, /* 0x61005c000 */ |
| { TARGET_PCS5G_BR + 10, 0x10060000, 1 }, /* 0x610060000 */ |
| { TARGET_DEV2G5 + 11, 0x10064000, 1 }, /* 0x610064000 */ |
| { TARGET_DEV5G + 11, 0x10068000, 1 }, /* 0x610068000 */ |
| { TARGET_PCS5G_BR + 11, 0x1006c000, 1 }, /* 0x61006c000 */ |
| { TARGET_DEV2G5 + 12, 0x10070000, 1 }, /* 0x610070000 */ |
| { TARGET_DEV10G, 0x10074000, 1 }, /* 0x610074000 */ |
| { TARGET_PCS10G_BR, 0x10078000, 1 }, /* 0x610078000 */ |
| { TARGET_DEV2G5 + 14, 0x1007c000, 1 }, /* 0x61007c000 */ |
| { TARGET_DEV10G + 2, 0x10080000, 1 }, /* 0x610080000 */ |
| { TARGET_PCS10G_BR + 2, 0x10084000, 1 }, /* 0x610084000 */ |
| { TARGET_DEV2G5 + 15, 0x10088000, 1 }, /* 0x610088000 */ |
| { TARGET_DEV10G + 3, 0x1008c000, 1 }, /* 0x61008c000 */ |
| { TARGET_PCS10G_BR + 3, 0x10090000, 1 }, /* 0x610090000 */ |
| { TARGET_DEV2G5 + 16, 0x10094000, 1 }, /* 0x610094000 */ |
| { TARGET_DEV2G5 + 17, 0x10098000, 1 }, /* 0x610098000 */ |
| { TARGET_DEV2G5 + 18, 0x1009c000, 1 }, /* 0x61009c000 */ |
| { TARGET_DEV2G5 + 19, 0x100a0000, 1 }, /* 0x6100a0000 */ |
| { TARGET_DEV2G5 + 20, 0x100a4000, 1 }, /* 0x6100a4000 */ |
| { TARGET_DEV2G5 + 21, 0x100a8000, 1 }, /* 0x6100a8000 */ |
| { TARGET_DEV2G5 + 22, 0x100ac000, 1 }, /* 0x6100ac000 */ |
| { TARGET_DEV2G5 + 23, 0x100b0000, 1 }, /* 0x6100b0000 */ |
| { TARGET_DEV2G5 + 32, 0x100b4000, 1 }, /* 0x6100b4000 */ |
| { TARGET_DEV2G5 + 33, 0x100b8000, 1 }, /* 0x6100b8000 */ |
| { TARGET_DEV2G5 + 34, 0x100bc000, 1 }, /* 0x6100bc000 */ |
| { TARGET_DEV2G5 + 35, 0x100c0000, 1 }, /* 0x6100c0000 */ |
| { TARGET_DEV2G5 + 36, 0x100c4000, 1 }, /* 0x6100c4000 */ |
| { TARGET_DEV2G5 + 37, 0x100c8000, 1 }, /* 0x6100c8000 */ |
| { TARGET_DEV2G5 + 38, 0x100cc000, 1 }, /* 0x6100cc000 */ |
| { TARGET_DEV2G5 + 39, 0x100d0000, 1 }, /* 0x6100d0000 */ |
| { TARGET_DEV2G5 + 40, 0x100d4000, 1 }, /* 0x6100d4000 */ |
| { TARGET_DEV2G5 + 41, 0x100d8000, 1 }, /* 0x6100d8000 */ |
| { TARGET_DEV2G5 + 42, 0x100dc000, 1 }, /* 0x6100dc000 */ |
| { TARGET_DEV2G5 + 43, 0x100e0000, 1 }, /* 0x6100e0000 */ |
| { TARGET_DEV2G5 + 44, 0x100e4000, 1 }, /* 0x6100e4000 */ |
| { TARGET_DEV2G5 + 45, 0x100e8000, 1 }, /* 0x6100e8000 */ |
| { TARGET_DEV2G5 + 46, 0x100ec000, 1 }, /* 0x6100ec000 */ |
| { TARGET_DEV2G5 + 47, 0x100f0000, 1 }, /* 0x6100f0000 */ |
| { TARGET_DEV2G5 + 57, 0x100f4000, 1 }, /* 0x6100f4000 */ |
| { TARGET_DEV25G + 1, 0x100f8000, 1 }, /* 0x6100f8000 */ |
| { TARGET_PCS25G_BR + 1, 0x100fc000, 1 }, /* 0x6100fc000 */ |
| { TARGET_DEV2G5 + 59, 0x10104000, 1 }, /* 0x610104000 */ |
| { TARGET_DEV25G + 3, 0x10108000, 1 }, /* 0x610108000 */ |
| { TARGET_PCS25G_BR + 3, 0x1010c000, 1 }, /* 0x61010c000 */ |
| { TARGET_DEV2G5 + 60, 0x10114000, 1 }, /* 0x610114000 */ |
| { TARGET_DEV25G + 4, 0x10118000, 1 }, /* 0x610118000 */ |
| { TARGET_PCS25G_BR + 4, 0x1011c000, 1 }, /* 0x61011c000 */ |
| { TARGET_DEV2G5 + 64, 0x10124000, 1 }, /* 0x610124000 */ |
| { TARGET_DEV5G + 12, 0x10128000, 1 }, /* 0x610128000 */ |
| { TARGET_PCS5G_BR + 12, 0x1012c000, 1 }, /* 0x61012c000 */ |
| { TARGET_PORT_CONF, 0x10130000, 1 }, /* 0x610130000 */ |
| { TARGET_DEV2G5 + 3, 0x10404000, 1 }, /* 0x610404000 */ |
| { TARGET_DEV5G + 3, 0x10408000, 1 }, /* 0x610408000 */ |
| { TARGET_PCS5G_BR + 3, 0x1040c000, 1 }, /* 0x61040c000 */ |
| { TARGET_DEV2G5 + 4, 0x10410000, 1 }, /* 0x610410000 */ |
| { TARGET_DEV5G + 4, 0x10414000, 1 }, /* 0x610414000 */ |
| { TARGET_PCS5G_BR + 4, 0x10418000, 1 }, /* 0x610418000 */ |
| { TARGET_DEV2G5 + 5, 0x1041c000, 1 }, /* 0x61041c000 */ |
| { TARGET_DEV5G + 5, 0x10420000, 1 }, /* 0x610420000 */ |
| { TARGET_PCS5G_BR + 5, 0x10424000, 1 }, /* 0x610424000 */ |
| { TARGET_DEV2G5 + 13, 0x10428000, 1 }, /* 0x610428000 */ |
| { TARGET_DEV10G + 1, 0x1042c000, 1 }, /* 0x61042c000 */ |
| { TARGET_PCS10G_BR + 1, 0x10430000, 1 }, /* 0x610430000 */ |
| { TARGET_DEV2G5 + 24, 0x10434000, 1 }, /* 0x610434000 */ |
| { TARGET_DEV2G5 + 25, 0x10438000, 1 }, /* 0x610438000 */ |
| { TARGET_DEV2G5 + 26, 0x1043c000, 1 }, /* 0x61043c000 */ |
| { TARGET_DEV2G5 + 27, 0x10440000, 1 }, /* 0x610440000 */ |
| { TARGET_DEV2G5 + 28, 0x10444000, 1 }, /* 0x610444000 */ |
| { TARGET_DEV2G5 + 29, 0x10448000, 1 }, /* 0x610448000 */ |
| { TARGET_DEV2G5 + 30, 0x1044c000, 1 }, /* 0x61044c000 */ |
| { TARGET_DEV2G5 + 31, 0x10450000, 1 }, /* 0x610450000 */ |
| { TARGET_DEV2G5 + 48, 0x10454000, 1 }, /* 0x610454000 */ |
| { TARGET_DEV10G + 4, 0x10458000, 1 }, /* 0x610458000 */ |
| { TARGET_PCS10G_BR + 4, 0x1045c000, 1 }, /* 0x61045c000 */ |
| { TARGET_DEV2G5 + 49, 0x10460000, 1 }, /* 0x610460000 */ |
| { TARGET_DEV10G + 5, 0x10464000, 1 }, /* 0x610464000 */ |
| { TARGET_PCS10G_BR + 5, 0x10468000, 1 }, /* 0x610468000 */ |
| { TARGET_DEV2G5 + 50, 0x1046c000, 1 }, /* 0x61046c000 */ |
| { TARGET_DEV10G + 6, 0x10470000, 1 }, /* 0x610470000 */ |
| { TARGET_PCS10G_BR + 6, 0x10474000, 1 }, /* 0x610474000 */ |
| { TARGET_DEV2G5 + 51, 0x10478000, 1 }, /* 0x610478000 */ |
| { TARGET_DEV10G + 7, 0x1047c000, 1 }, /* 0x61047c000 */ |
| { TARGET_PCS10G_BR + 7, 0x10480000, 1 }, /* 0x610480000 */ |
| { TARGET_DEV2G5 + 52, 0x10484000, 1 }, /* 0x610484000 */ |
| { TARGET_DEV10G + 8, 0x10488000, 1 }, /* 0x610488000 */ |
| { TARGET_PCS10G_BR + 8, 0x1048c000, 1 }, /* 0x61048c000 */ |
| { TARGET_DEV2G5 + 53, 0x10490000, 1 }, /* 0x610490000 */ |
| { TARGET_DEV10G + 9, 0x10494000, 1 }, /* 0x610494000 */ |
| { TARGET_PCS10G_BR + 9, 0x10498000, 1 }, /* 0x610498000 */ |
| { TARGET_DEV2G5 + 54, 0x1049c000, 1 }, /* 0x61049c000 */ |
| { TARGET_DEV10G + 10, 0x104a0000, 1 }, /* 0x6104a0000 */ |
| { TARGET_PCS10G_BR + 10, 0x104a4000, 1 }, /* 0x6104a4000 */ |
| { TARGET_DEV2G5 + 55, 0x104a8000, 1 }, /* 0x6104a8000 */ |
| { TARGET_DEV10G + 11, 0x104ac000, 1 }, /* 0x6104ac000 */ |
| { TARGET_PCS10G_BR + 11, 0x104b0000, 1 }, /* 0x6104b0000 */ |
| { TARGET_DEV2G5 + 56, 0x104b4000, 1 }, /* 0x6104b4000 */ |
| { TARGET_DEV25G, 0x104b8000, 1 }, /* 0x6104b8000 */ |
| { TARGET_PCS25G_BR, 0x104bc000, 1 }, /* 0x6104bc000 */ |
| { TARGET_DEV2G5 + 58, 0x104c4000, 1 }, /* 0x6104c4000 */ |
| { TARGET_DEV25G + 2, 0x104c8000, 1 }, /* 0x6104c8000 */ |
| { TARGET_PCS25G_BR + 2, 0x104cc000, 1 }, /* 0x6104cc000 */ |
| { TARGET_DEV2G5 + 61, 0x104d4000, 1 }, /* 0x6104d4000 */ |
| { TARGET_DEV25G + 5, 0x104d8000, 1 }, /* 0x6104d8000 */ |
| { TARGET_PCS25G_BR + 5, 0x104dc000, 1 }, /* 0x6104dc000 */ |
| { TARGET_DEV2G5 + 62, 0x104e4000, 1 }, /* 0x6104e4000 */ |
| { TARGET_DEV25G + 6, 0x104e8000, 1 }, /* 0x6104e8000 */ |
| { TARGET_PCS25G_BR + 6, 0x104ec000, 1 }, /* 0x6104ec000 */ |
| { TARGET_DEV2G5 + 63, 0x104f4000, 1 }, /* 0x6104f4000 */ |
| { TARGET_DEV25G + 7, 0x104f8000, 1 }, /* 0x6104f8000 */ |
| { TARGET_PCS25G_BR + 7, 0x104fc000, 1 }, /* 0x6104fc000 */ |
| { TARGET_DSM, 0x10504000, 1 }, /* 0x610504000 */ |
| { TARGET_ASM, 0x10600000, 1 }, /* 0x610600000 */ |
| { TARGET_GCB, 0x11010000, 2 }, /* 0x611010000 */ |
| { TARGET_QS, 0x11030000, 2 }, /* 0x611030000 */ |
| { TARGET_PTP, 0x11040000, 2 }, /* 0x611040000 */ |
| { TARGET_ANA_ACL, 0x11050000, 2 }, /* 0x611050000 */ |
| { TARGET_LRN, 0x11060000, 2 }, /* 0x611060000 */ |
| { TARGET_VCAP_SUPER, 0x11080000, 2 }, /* 0x611080000 */ |
| { TARGET_QSYS, 0x110a0000, 2 }, /* 0x6110a0000 */ |
| { TARGET_QFWD, 0x110b0000, 2 }, /* 0x6110b0000 */ |
| { TARGET_XQS, 0x110c0000, 2 }, /* 0x6110c0000 */ |
| { TARGET_VCAP_ES2, 0x110d0000, 2 }, /* 0x6110d0000 */ |
| { TARGET_VCAP_ES0, 0x110e0000, 2 }, /* 0x6110e0000 */ |
| { TARGET_CLKGEN, 0x11100000, 2 }, /* 0x611100000 */ |
| { TARGET_ANA_AC_POL, 0x11200000, 2 }, /* 0x611200000 */ |
| { TARGET_QRES, 0x11280000, 2 }, /* 0x611280000 */ |
| { TARGET_EACL, 0x112c0000, 2 }, /* 0x6112c0000 */ |
| { TARGET_ANA_CL, 0x11400000, 2 }, /* 0x611400000 */ |
| { TARGET_ANA_L3, 0x11480000, 2 }, /* 0x611480000 */ |
| { TARGET_ANA_AC_SDLB, 0x11500000, 2 }, /* 0x611500000 */ |
| { TARGET_HSCH, 0x11580000, 2 }, /* 0x611580000 */ |
| { TARGET_REW, 0x11600000, 2 }, /* 0x611600000 */ |
| { TARGET_ANA_L2, 0x11800000, 2 }, /* 0x611800000 */ |
| { TARGET_ANA_AC, 0x11900000, 2 }, /* 0x611900000 */ |
| { TARGET_VOP, 0x11a00000, 2 }, /* 0x611a00000 */ |
| }; |
| |
| static int sparx5_create_targets(struct sparx5 *sparx5) |
| { |
| struct resource *iores[IO_RANGES]; |
| void __iomem *iomem[IO_RANGES]; |
| void __iomem *begin[IO_RANGES]; |
| int range_id[IO_RANGES]; |
| int idx, jdx; |
| |
| for (idx = 0, jdx = 0; jdx < ARRAY_SIZE(sparx5_main_iomap); jdx++) { |
| const struct sparx5_main_io_resource *iomap = &sparx5_main_iomap[jdx]; |
| |
| if (idx == iomap->range) { |
| range_id[idx] = jdx; |
| idx++; |
| } |
| } |
| for (idx = 0; idx < IO_RANGES; idx++) { |
| iores[idx] = platform_get_resource(sparx5->pdev, IORESOURCE_MEM, |
| idx); |
| if (!iores[idx]) { |
| dev_err(sparx5->dev, "Invalid resource\n"); |
| return -EINVAL; |
| } |
| iomem[idx] = devm_ioremap(sparx5->dev, |
| iores[idx]->start, |
| resource_size(iores[idx])); |
| if (!iomem[idx]) { |
| dev_err(sparx5->dev, "Unable to get switch registers: %s\n", |
| iores[idx]->name); |
| return -ENOMEM; |
| } |
| begin[idx] = iomem[idx] - sparx5_main_iomap[range_id[idx]].offset; |
| } |
| for (jdx = 0; jdx < ARRAY_SIZE(sparx5_main_iomap); jdx++) { |
| const struct sparx5_main_io_resource *iomap = &sparx5_main_iomap[jdx]; |
| |
| sparx5->regs[iomap->id] = begin[iomap->range] + iomap->offset; |
| } |
| return 0; |
| } |
| |
| static int sparx5_create_port(struct sparx5 *sparx5, |
| struct initial_port_config *config) |
| { |
| struct sparx5_port *spx5_port; |
| struct net_device *ndev; |
| struct phylink *phylink; |
| int err; |
| |
| ndev = sparx5_create_netdev(sparx5, config->portno); |
| if (IS_ERR(ndev)) { |
| dev_err(sparx5->dev, "Could not create net device: %02u\n", |
| config->portno); |
| return PTR_ERR(ndev); |
| } |
| spx5_port = netdev_priv(ndev); |
| spx5_port->of_node = config->node; |
| spx5_port->serdes = config->serdes; |
| spx5_port->pvid = NULL_VID; |
| spx5_port->signd_internal = true; |
| spx5_port->signd_active_high = true; |
| spx5_port->signd_enable = true; |
| spx5_port->max_vlan_tags = SPX5_PORT_MAX_TAGS_NONE; |
| spx5_port->vlan_type = SPX5_VLAN_PORT_TYPE_UNAWARE; |
| spx5_port->custom_etype = 0x8880; /* Vitesse */ |
| spx5_port->phylink_pcs.poll = true; |
| spx5_port->phylink_pcs.ops = &sparx5_phylink_pcs_ops; |
| spx5_port->phylink_pcs.neg_mode = true; |
| spx5_port->is_mrouter = false; |
| INIT_LIST_HEAD(&spx5_port->tc_templates); |
| sparx5->ports[config->portno] = spx5_port; |
| |
| err = sparx5_port_init(sparx5, spx5_port, &config->conf); |
| if (err) { |
| dev_err(sparx5->dev, "port init failed\n"); |
| return err; |
| } |
| spx5_port->conf = config->conf; |
| |
| /* Setup VLAN */ |
| sparx5_vlan_port_setup(sparx5, spx5_port->portno); |
| |
| /* Create a phylink for PHY management. Also handles SFPs */ |
| spx5_port->phylink_config.dev = &spx5_port->ndev->dev; |
| spx5_port->phylink_config.type = PHYLINK_NETDEV; |
| spx5_port->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | |
| MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD | |
| MAC_2500FD | MAC_5000FD | MAC_10000FD | MAC_25000FD; |
| |
| __set_bit(PHY_INTERFACE_MODE_SGMII, |
| spx5_port->phylink_config.supported_interfaces); |
| __set_bit(PHY_INTERFACE_MODE_QSGMII, |
| spx5_port->phylink_config.supported_interfaces); |
| __set_bit(PHY_INTERFACE_MODE_1000BASEX, |
| spx5_port->phylink_config.supported_interfaces); |
| __set_bit(PHY_INTERFACE_MODE_2500BASEX, |
| spx5_port->phylink_config.supported_interfaces); |
| |
| if (spx5_port->conf.bandwidth == SPEED_5000 || |
| spx5_port->conf.bandwidth == SPEED_10000 || |
| spx5_port->conf.bandwidth == SPEED_25000) |
| __set_bit(PHY_INTERFACE_MODE_5GBASER, |
| spx5_port->phylink_config.supported_interfaces); |
| |
| if (spx5_port->conf.bandwidth == SPEED_10000 || |
| spx5_port->conf.bandwidth == SPEED_25000) |
| __set_bit(PHY_INTERFACE_MODE_10GBASER, |
| spx5_port->phylink_config.supported_interfaces); |
| |
| if (spx5_port->conf.bandwidth == SPEED_25000) |
| __set_bit(PHY_INTERFACE_MODE_25GBASER, |
| spx5_port->phylink_config.supported_interfaces); |
| |
| phylink = phylink_create(&spx5_port->phylink_config, |
| of_fwnode_handle(config->node), |
| config->conf.phy_mode, |
| &sparx5_phylink_mac_ops); |
| if (IS_ERR(phylink)) |
| return PTR_ERR(phylink); |
| |
| spx5_port->phylink = phylink; |
| |
| return 0; |
| } |
| |
| static int sparx5_init_ram(struct sparx5 *s5) |
| { |
| const struct sparx5_ram_config spx5_ram_cfg[] = { |
| {spx5_reg_get(s5, ANA_AC_STAT_RESET), ANA_AC_STAT_RESET_RESET}, |
| {spx5_reg_get(s5, ASM_STAT_CFG), ASM_STAT_CFG_STAT_CNT_CLR_SHOT}, |
| {spx5_reg_get(s5, QSYS_RAM_INIT), QSYS_RAM_INIT_RAM_INIT}, |
| {spx5_reg_get(s5, REW_RAM_INIT), QSYS_RAM_INIT_RAM_INIT}, |
| {spx5_reg_get(s5, VOP_RAM_INIT), QSYS_RAM_INIT_RAM_INIT}, |
| {spx5_reg_get(s5, ANA_AC_RAM_INIT), QSYS_RAM_INIT_RAM_INIT}, |
| {spx5_reg_get(s5, ASM_RAM_INIT), QSYS_RAM_INIT_RAM_INIT}, |
| {spx5_reg_get(s5, EACL_RAM_INIT), QSYS_RAM_INIT_RAM_INIT}, |
| {spx5_reg_get(s5, VCAP_SUPER_RAM_INIT), QSYS_RAM_INIT_RAM_INIT}, |
| {spx5_reg_get(s5, DSM_RAM_INIT), QSYS_RAM_INIT_RAM_INIT} |
| }; |
| const struct sparx5_ram_config *cfg; |
| u32 value, pending, jdx, idx; |
| |
| for (jdx = 0; jdx < 10; jdx++) { |
| pending = ARRAY_SIZE(spx5_ram_cfg); |
| for (idx = 0; idx < ARRAY_SIZE(spx5_ram_cfg); idx++) { |
| cfg = &spx5_ram_cfg[idx]; |
| if (jdx == 0) { |
| writel(cfg->init_val, cfg->init_reg); |
| } else { |
| value = readl(cfg->init_reg); |
| if ((value & cfg->init_val) != cfg->init_val) |
| pending--; |
| } |
| } |
| if (!pending) |
| break; |
| usleep_range(USEC_PER_MSEC, 2 * USEC_PER_MSEC); |
| } |
| |
| if (pending > 0) { |
| /* Still initializing, should be complete in |
| * less than 1ms |
| */ |
| dev_err(s5->dev, "Memory initialization error\n"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int sparx5_init_switchcore(struct sparx5 *sparx5) |
| { |
| u32 value; |
| int err = 0; |
| |
| spx5_rmw(EACL_POL_EACL_CFG_EACL_FORCE_INIT_SET(1), |
| EACL_POL_EACL_CFG_EACL_FORCE_INIT, |
| sparx5, |
| EACL_POL_EACL_CFG); |
| |
| spx5_rmw(EACL_POL_EACL_CFG_EACL_FORCE_INIT_SET(0), |
| EACL_POL_EACL_CFG_EACL_FORCE_INIT, |
| sparx5, |
| EACL_POL_EACL_CFG); |
| |
| /* Initialize memories, if not done already */ |
| value = spx5_rd(sparx5, HSCH_RESET_CFG); |
| if (!(value & HSCH_RESET_CFG_CORE_ENA)) { |
| err = sparx5_init_ram(sparx5); |
| if (err) |
| return err; |
| } |
| |
| /* Reset counters */ |
| spx5_wr(ANA_AC_STAT_RESET_RESET_SET(1), sparx5, ANA_AC_STAT_RESET); |
| spx5_wr(ASM_STAT_CFG_STAT_CNT_CLR_SHOT_SET(1), sparx5, ASM_STAT_CFG); |
| |
| /* Enable switch-core and queue system */ |
| spx5_wr(HSCH_RESET_CFG_CORE_ENA_SET(1), sparx5, HSCH_RESET_CFG); |
| |
| return 0; |
| } |
| |
| static int sparx5_init_coreclock(struct sparx5 *sparx5) |
| { |
| enum sparx5_core_clockfreq freq = sparx5->coreclock; |
| u32 clk_div, clk_period, pol_upd_int, idx; |
| |
| /* Verify if core clock frequency is supported on target. |
| * If 'VTSS_CORE_CLOCK_DEFAULT' then the highest supported |
| * freq. is used |
| */ |
| switch (sparx5->target_ct) { |
| case SPX5_TARGET_CT_7546: |
| if (sparx5->coreclock == SPX5_CORE_CLOCK_DEFAULT) |
| freq = SPX5_CORE_CLOCK_250MHZ; |
| else if (sparx5->coreclock != SPX5_CORE_CLOCK_250MHZ) |
| freq = 0; /* Not supported */ |
| break; |
| case SPX5_TARGET_CT_7549: |
| case SPX5_TARGET_CT_7552: |
| case SPX5_TARGET_CT_7556: |
| if (sparx5->coreclock == SPX5_CORE_CLOCK_DEFAULT) |
| freq = SPX5_CORE_CLOCK_500MHZ; |
| else if (sparx5->coreclock != SPX5_CORE_CLOCK_500MHZ) |
| freq = 0; /* Not supported */ |
| break; |
| case SPX5_TARGET_CT_7558: |
| case SPX5_TARGET_CT_7558TSN: |
| if (sparx5->coreclock == SPX5_CORE_CLOCK_DEFAULT) |
| freq = SPX5_CORE_CLOCK_625MHZ; |
| else if (sparx5->coreclock != SPX5_CORE_CLOCK_625MHZ) |
| freq = 0; /* Not supported */ |
| break; |
| case SPX5_TARGET_CT_7546TSN: |
| if (sparx5->coreclock == SPX5_CORE_CLOCK_DEFAULT) |
| freq = SPX5_CORE_CLOCK_625MHZ; |
| break; |
| case SPX5_TARGET_CT_7549TSN: |
| case SPX5_TARGET_CT_7552TSN: |
| case SPX5_TARGET_CT_7556TSN: |
| if (sparx5->coreclock == SPX5_CORE_CLOCK_DEFAULT) |
| freq = SPX5_CORE_CLOCK_625MHZ; |
| else if (sparx5->coreclock == SPX5_CORE_CLOCK_250MHZ) |
| freq = 0; /* Not supported */ |
| break; |
| default: |
| dev_err(sparx5->dev, "Target (%#04x) not supported\n", |
| sparx5->target_ct); |
| return -ENODEV; |
| } |
| |
| switch (freq) { |
| case SPX5_CORE_CLOCK_250MHZ: |
| clk_div = 10; |
| pol_upd_int = 312; |
| break; |
| case SPX5_CORE_CLOCK_500MHZ: |
| clk_div = 5; |
| pol_upd_int = 624; |
| break; |
| case SPX5_CORE_CLOCK_625MHZ: |
| clk_div = 4; |
| pol_upd_int = 780; |
| break; |
| default: |
| dev_err(sparx5->dev, "%d coreclock not supported on (%#04x)\n", |
| sparx5->coreclock, sparx5->target_ct); |
| return -EINVAL; |
| } |
| |
| /* Update state with chosen frequency */ |
| sparx5->coreclock = freq; |
| |
| /* Configure the LCPLL */ |
| spx5_rmw(CLKGEN_LCPLL1_CORE_CLK_CFG_CORE_CLK_DIV_SET(clk_div) | |
| CLKGEN_LCPLL1_CORE_CLK_CFG_CORE_PRE_DIV_SET(0) | |
| CLKGEN_LCPLL1_CORE_CLK_CFG_CORE_ROT_DIR_SET(0) | |
| CLKGEN_LCPLL1_CORE_CLK_CFG_CORE_ROT_SEL_SET(0) | |
| CLKGEN_LCPLL1_CORE_CLK_CFG_CORE_ROT_ENA_SET(0) | |
| CLKGEN_LCPLL1_CORE_CLK_CFG_CORE_CLK_ENA_SET(1), |
| CLKGEN_LCPLL1_CORE_CLK_CFG_CORE_CLK_DIV | |
| CLKGEN_LCPLL1_CORE_CLK_CFG_CORE_PRE_DIV | |
| CLKGEN_LCPLL1_CORE_CLK_CFG_CORE_ROT_DIR | |
| CLKGEN_LCPLL1_CORE_CLK_CFG_CORE_ROT_SEL | |
| CLKGEN_LCPLL1_CORE_CLK_CFG_CORE_ROT_ENA | |
| CLKGEN_LCPLL1_CORE_CLK_CFG_CORE_CLK_ENA, |
| sparx5, |
| CLKGEN_LCPLL1_CORE_CLK_CFG); |
| |
| clk_period = sparx5_clk_period(freq); |
| |
| spx5_rmw(HSCH_SYS_CLK_PER_100PS_SET(clk_period / 100), |
| HSCH_SYS_CLK_PER_100PS, |
| sparx5, |
| HSCH_SYS_CLK_PER); |
| |
| spx5_rmw(ANA_AC_POL_BDLB_DLB_CTRL_CLK_PERIOD_01NS_SET(clk_period / 100), |
| ANA_AC_POL_BDLB_DLB_CTRL_CLK_PERIOD_01NS, |
| sparx5, |
| ANA_AC_POL_BDLB_DLB_CTRL); |
| |
| spx5_rmw(ANA_AC_POL_SLB_DLB_CTRL_CLK_PERIOD_01NS_SET(clk_period / 100), |
| ANA_AC_POL_SLB_DLB_CTRL_CLK_PERIOD_01NS, |
| sparx5, |
| ANA_AC_POL_SLB_DLB_CTRL); |
| |
| spx5_rmw(LRN_AUTOAGE_CFG_1_CLK_PERIOD_01NS_SET(clk_period / 100), |
| LRN_AUTOAGE_CFG_1_CLK_PERIOD_01NS, |
| sparx5, |
| LRN_AUTOAGE_CFG_1); |
| |
| for (idx = 0; idx < 3; idx++) |
| spx5_rmw(GCB_SIO_CLOCK_SYS_CLK_PERIOD_SET(clk_period / 100), |
| GCB_SIO_CLOCK_SYS_CLK_PERIOD, |
| sparx5, |
| GCB_SIO_CLOCK(idx)); |
| |
| spx5_rmw(HSCH_TAS_STATEMACHINE_CFG_REVISIT_DLY_SET |
| ((256 * 1000) / clk_period), |
| HSCH_TAS_STATEMACHINE_CFG_REVISIT_DLY, |
| sparx5, |
| HSCH_TAS_STATEMACHINE_CFG); |
| |
| spx5_rmw(ANA_AC_POL_POL_UPD_INT_CFG_POL_UPD_INT_SET(pol_upd_int), |
| ANA_AC_POL_POL_UPD_INT_CFG_POL_UPD_INT, |
| sparx5, |
| ANA_AC_POL_POL_UPD_INT_CFG); |
| |
| return 0; |
| } |
| |
| static int sparx5_qlim_set(struct sparx5 *sparx5) |
| { |
| u32 res, dp, prio; |
| |
| for (res = 0; res < 2; res++) { |
| for (prio = 0; prio < 8; prio++) |
| spx5_wr(0xFFF, sparx5, |
| QRES_RES_CFG(prio + 630 + res * 1024)); |
| |
| for (dp = 0; dp < 4; dp++) |
| spx5_wr(0xFFF, sparx5, |
| QRES_RES_CFG(dp + 638 + res * 1024)); |
| } |
| |
| /* Set 80,90,95,100% of memory size for top watermarks */ |
| spx5_wr(QLIM_WM(80), sparx5, XQS_QLIMIT_SHR_QLIM_CFG(0)); |
| spx5_wr(QLIM_WM(90), sparx5, XQS_QLIMIT_SHR_CTOP_CFG(0)); |
| spx5_wr(QLIM_WM(95), sparx5, XQS_QLIMIT_SHR_ATOP_CFG(0)); |
| spx5_wr(QLIM_WM(100), sparx5, XQS_QLIMIT_SHR_TOP_CFG(0)); |
| |
| return 0; |
| } |
| |
| /* Some boards needs to map the SGPIO for signal detect explicitly to the |
| * port module |
| */ |
| static void sparx5_board_init(struct sparx5 *sparx5) |
| { |
| int idx; |
| |
| if (!sparx5->sd_sgpio_remapping) |
| return; |
| |
| /* Enable SGPIO Signal Detect remapping */ |
| spx5_rmw(GCB_HW_SGPIO_SD_CFG_SD_MAP_SEL, |
| GCB_HW_SGPIO_SD_CFG_SD_MAP_SEL, |
| sparx5, |
| GCB_HW_SGPIO_SD_CFG); |
| |
| /* Refer to LOS SGPIO */ |
| for (idx = 0; idx < SPX5_PORTS; idx++) |
| if (sparx5->ports[idx]) |
| if (sparx5->ports[idx]->conf.sd_sgpio != ~0) |
| spx5_wr(sparx5->ports[idx]->conf.sd_sgpio, |
| sparx5, |
| GCB_HW_SGPIO_TO_SD_MAP_CFG(idx)); |
| } |
| |
| static int sparx5_start(struct sparx5 *sparx5) |
| { |
| u8 broadcast[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; |
| char queue_name[32]; |
| u32 idx; |
| int err; |
| |
| /* Setup own UPSIDs */ |
| for (idx = 0; idx < 3; idx++) { |
| spx5_wr(idx, sparx5, ANA_AC_OWN_UPSID(idx)); |
| spx5_wr(idx, sparx5, ANA_CL_OWN_UPSID(idx)); |
| spx5_wr(idx, sparx5, ANA_L2_OWN_UPSID(idx)); |
| spx5_wr(idx, sparx5, REW_OWN_UPSID(idx)); |
| } |
| |
| /* Enable CPU ports */ |
| for (idx = SPX5_PORTS; idx < SPX5_PORTS_ALL; idx++) |
| spx5_rmw(QFWD_SWITCH_PORT_MODE_PORT_ENA_SET(1), |
| QFWD_SWITCH_PORT_MODE_PORT_ENA, |
| sparx5, |
| QFWD_SWITCH_PORT_MODE(idx)); |
| |
| /* Init masks */ |
| sparx5_update_fwd(sparx5); |
| |
| /* CPU copy CPU pgids */ |
| spx5_wr(ANA_AC_PGID_MISC_CFG_PGID_CPU_COPY_ENA_SET(1), |
| sparx5, ANA_AC_PGID_MISC_CFG(PGID_CPU)); |
| spx5_wr(ANA_AC_PGID_MISC_CFG_PGID_CPU_COPY_ENA_SET(1), |
| sparx5, ANA_AC_PGID_MISC_CFG(PGID_BCAST)); |
| |
| /* Recalc injected frame FCS */ |
| for (idx = SPX5_PORT_CPU_0; idx <= SPX5_PORT_CPU_1; idx++) |
| spx5_rmw(ANA_CL_FILTER_CTRL_FORCE_FCS_UPDATE_ENA_SET(1), |
| ANA_CL_FILTER_CTRL_FORCE_FCS_UPDATE_ENA, |
| sparx5, ANA_CL_FILTER_CTRL(idx)); |
| |
| /* Init MAC table, ageing */ |
| sparx5_mact_init(sparx5); |
| |
| /* Init PGID table arbitrator */ |
| sparx5_pgid_init(sparx5); |
| |
| /* Setup VLANs */ |
| sparx5_vlan_init(sparx5); |
| |
| /* Add host mode BC address (points only to CPU) */ |
| sparx5_mact_learn(sparx5, PGID_CPU, broadcast, NULL_VID); |
| |
| /* Enable queue limitation watermarks */ |
| sparx5_qlim_set(sparx5); |
| |
| err = sparx5_config_auto_calendar(sparx5); |
| if (err) |
| return err; |
| |
| err = sparx5_config_dsm_calendar(sparx5); |
| if (err) |
| return err; |
| |
| /* Init stats */ |
| err = sparx_stats_init(sparx5); |
| if (err) |
| return err; |
| |
| /* Init mact_sw struct */ |
| mutex_init(&sparx5->mact_lock); |
| INIT_LIST_HEAD(&sparx5->mact_entries); |
| snprintf(queue_name, sizeof(queue_name), "%s-mact", |
| dev_name(sparx5->dev)); |
| sparx5->mact_queue = create_singlethread_workqueue(queue_name); |
| if (!sparx5->mact_queue) |
| return -ENOMEM; |
| |
| INIT_DELAYED_WORK(&sparx5->mact_work, sparx5_mact_pull_work); |
| queue_delayed_work(sparx5->mact_queue, &sparx5->mact_work, |
| SPX5_MACT_PULL_DELAY); |
| |
| mutex_init(&sparx5->mdb_lock); |
| INIT_LIST_HEAD(&sparx5->mdb_entries); |
| |
| err = sparx5_register_netdevs(sparx5); |
| if (err) |
| return err; |
| |
| sparx5_board_init(sparx5); |
| err = sparx5_register_notifier_blocks(sparx5); |
| if (err) |
| return err; |
| |
| err = sparx5_vcap_init(sparx5); |
| if (err) { |
| sparx5_unregister_notifier_blocks(sparx5); |
| return err; |
| } |
| |
| /* Start Frame DMA with fallback to register based INJ/XTR */ |
| err = -ENXIO; |
| if (sparx5->fdma_irq >= 0) { |
| if (GCB_CHIP_ID_REV_ID_GET(sparx5->chip_id) > 0) |
| err = devm_request_threaded_irq(sparx5->dev, |
| sparx5->fdma_irq, |
| NULL, |
| sparx5_fdma_handler, |
| IRQF_ONESHOT, |
| "sparx5-fdma", sparx5); |
| if (!err) |
| err = sparx5_fdma_start(sparx5); |
| if (err) |
| sparx5->fdma_irq = -ENXIO; |
| } else { |
| sparx5->fdma_irq = -ENXIO; |
| } |
| if (err && sparx5->xtr_irq >= 0) { |
| err = devm_request_irq(sparx5->dev, sparx5->xtr_irq, |
| sparx5_xtr_handler, IRQF_SHARED, |
| "sparx5-xtr", sparx5); |
| if (!err) |
| err = sparx5_manual_injection_mode(sparx5); |
| if (err) |
| sparx5->xtr_irq = -ENXIO; |
| } else { |
| sparx5->xtr_irq = -ENXIO; |
| } |
| |
| if (sparx5->ptp_irq >= 0) { |
| err = devm_request_threaded_irq(sparx5->dev, sparx5->ptp_irq, |
| NULL, sparx5_ptp_irq_handler, |
| IRQF_ONESHOT, "sparx5-ptp", |
| sparx5); |
| if (err) |
| sparx5->ptp_irq = -ENXIO; |
| |
| sparx5->ptp = 1; |
| } |
| |
| return err; |
| } |
| |
| static void sparx5_cleanup_ports(struct sparx5 *sparx5) |
| { |
| sparx5_unregister_netdevs(sparx5); |
| sparx5_destroy_netdevs(sparx5); |
| } |
| |
| static int mchp_sparx5_probe(struct platform_device *pdev) |
| { |
| struct initial_port_config *configs, *config; |
| struct device_node *np = pdev->dev.of_node; |
| struct device_node *ports, *portnp; |
| struct reset_control *reset; |
| struct sparx5 *sparx5; |
| int idx = 0, err = 0; |
| |
| if (!np && !pdev->dev.platform_data) |
| return -ENODEV; |
| |
| sparx5 = devm_kzalloc(&pdev->dev, sizeof(*sparx5), GFP_KERNEL); |
| if (!sparx5) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, sparx5); |
| sparx5->pdev = pdev; |
| sparx5->dev = &pdev->dev; |
| spin_lock_init(&sparx5->tx_lock); |
| |
| /* Do switch core reset if available */ |
| reset = devm_reset_control_get_optional_shared(&pdev->dev, "switch"); |
| if (IS_ERR(reset)) |
| return dev_err_probe(&pdev->dev, PTR_ERR(reset), |
| "Failed to get switch reset controller.\n"); |
| reset_control_reset(reset); |
| |
| /* Default values, some from DT */ |
| sparx5->coreclock = SPX5_CORE_CLOCK_DEFAULT; |
| |
| sparx5->debugfs_root = debugfs_create_dir("sparx5", NULL); |
| |
| ports = of_get_child_by_name(np, "ethernet-ports"); |
| if (!ports) { |
| dev_err(sparx5->dev, "no ethernet-ports child node found\n"); |
| return -ENODEV; |
| } |
| sparx5->port_count = of_get_child_count(ports); |
| |
| configs = kcalloc(sparx5->port_count, |
| sizeof(struct initial_port_config), GFP_KERNEL); |
| if (!configs) { |
| err = -ENOMEM; |
| goto cleanup_pnode; |
| } |
| |
| for_each_available_child_of_node(ports, portnp) { |
| struct sparx5_port_config *conf; |
| struct phy *serdes; |
| u32 portno; |
| |
| err = of_property_read_u32(portnp, "reg", &portno); |
| if (err) { |
| dev_err(sparx5->dev, "port reg property error\n"); |
| continue; |
| } |
| config = &configs[idx]; |
| conf = &config->conf; |
| conf->speed = SPEED_UNKNOWN; |
| conf->bandwidth = SPEED_UNKNOWN; |
| err = of_get_phy_mode(portnp, &conf->phy_mode); |
| if (err) { |
| dev_err(sparx5->dev, "port %u: missing phy-mode\n", |
| portno); |
| continue; |
| } |
| err = of_property_read_u32(portnp, "microchip,bandwidth", |
| &conf->bandwidth); |
| if (err) { |
| dev_err(sparx5->dev, "port %u: missing bandwidth\n", |
| portno); |
| continue; |
| } |
| err = of_property_read_u32(portnp, "microchip,sd-sgpio", &conf->sd_sgpio); |
| if (err) |
| conf->sd_sgpio = ~0; |
| else |
| sparx5->sd_sgpio_remapping = true; |
| serdes = devm_of_phy_get(sparx5->dev, portnp, NULL); |
| if (IS_ERR(serdes)) { |
| err = dev_err_probe(sparx5->dev, PTR_ERR(serdes), |
| "port %u: missing serdes\n", |
| portno); |
| of_node_put(portnp); |
| goto cleanup_config; |
| } |
| config->portno = portno; |
| config->node = portnp; |
| config->serdes = serdes; |
| |
| conf->media = PHY_MEDIA_DAC; |
| conf->serdes_reset = true; |
| conf->portmode = conf->phy_mode; |
| conf->power_down = true; |
| idx++; |
| } |
| |
| err = sparx5_create_targets(sparx5); |
| if (err) |
| goto cleanup_config; |
| |
| if (of_get_mac_address(np, sparx5->base_mac)) { |
| dev_info(sparx5->dev, "MAC addr was not set, use random MAC\n"); |
| eth_random_addr(sparx5->base_mac); |
| sparx5->base_mac[5] = 0; |
| } |
| |
| sparx5->fdma_irq = platform_get_irq_byname(sparx5->pdev, "fdma"); |
| sparx5->xtr_irq = platform_get_irq_byname(sparx5->pdev, "xtr"); |
| sparx5->ptp_irq = platform_get_irq_byname(sparx5->pdev, "ptp"); |
| |
| /* Read chip ID to check CPU interface */ |
| sparx5->chip_id = spx5_rd(sparx5, GCB_CHIP_ID); |
| |
| sparx5->target_ct = (enum spx5_target_chiptype) |
| GCB_CHIP_ID_PART_ID_GET(sparx5->chip_id); |
| |
| /* Initialize Switchcore and internal RAMs */ |
| err = sparx5_init_switchcore(sparx5); |
| if (err) { |
| dev_err(sparx5->dev, "Switchcore initialization error\n"); |
| goto cleanup_config; |
| } |
| |
| /* Initialize the LC-PLL (core clock) and set affected registers */ |
| err = sparx5_init_coreclock(sparx5); |
| if (err) { |
| dev_err(sparx5->dev, "LC-PLL initialization error\n"); |
| goto cleanup_config; |
| } |
| |
| for (idx = 0; idx < sparx5->port_count; ++idx) { |
| config = &configs[idx]; |
| if (!config->node) |
| continue; |
| |
| err = sparx5_create_port(sparx5, config); |
| if (err) { |
| dev_err(sparx5->dev, "port create error\n"); |
| goto cleanup_ports; |
| } |
| } |
| |
| err = sparx5_start(sparx5); |
| if (err) { |
| dev_err(sparx5->dev, "Start failed\n"); |
| goto cleanup_ports; |
| } |
| |
| err = sparx5_qos_init(sparx5); |
| if (err) { |
| dev_err(sparx5->dev, "Failed to initialize QoS\n"); |
| goto cleanup_ports; |
| } |
| |
| err = sparx5_ptp_init(sparx5); |
| if (err) { |
| dev_err(sparx5->dev, "PTP failed\n"); |
| goto cleanup_ports; |
| } |
| goto cleanup_config; |
| |
| cleanup_ports: |
| sparx5_cleanup_ports(sparx5); |
| if (sparx5->mact_queue) |
| destroy_workqueue(sparx5->mact_queue); |
| cleanup_config: |
| kfree(configs); |
| cleanup_pnode: |
| of_node_put(ports); |
| return err; |
| } |
| |
| static void mchp_sparx5_remove(struct platform_device *pdev) |
| { |
| struct sparx5 *sparx5 = platform_get_drvdata(pdev); |
| |
| debugfs_remove_recursive(sparx5->debugfs_root); |
| if (sparx5->xtr_irq) { |
| disable_irq(sparx5->xtr_irq); |
| sparx5->xtr_irq = -ENXIO; |
| } |
| if (sparx5->fdma_irq) { |
| disable_irq(sparx5->fdma_irq); |
| sparx5->fdma_irq = -ENXIO; |
| } |
| sparx5_ptp_deinit(sparx5); |
| sparx5_fdma_stop(sparx5); |
| sparx5_cleanup_ports(sparx5); |
| sparx5_vcap_destroy(sparx5); |
| /* Unregister netdevs */ |
| sparx5_unregister_notifier_blocks(sparx5); |
| destroy_workqueue(sparx5->mact_queue); |
| } |
| |
| static const struct of_device_id mchp_sparx5_match[] = { |
| { .compatible = "microchip,sparx5-switch" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, mchp_sparx5_match); |
| |
| static struct platform_driver mchp_sparx5_driver = { |
| .probe = mchp_sparx5_probe, |
| .remove_new = mchp_sparx5_remove, |
| .driver = { |
| .name = "sparx5-switch", |
| .of_match_table = mchp_sparx5_match, |
| }, |
| }; |
| |
| module_platform_driver(mchp_sparx5_driver); |
| |
| MODULE_DESCRIPTION("Microchip Sparx5 switch driver"); |
| MODULE_AUTHOR("Steen Hegelund <steen.hegelund@microchip.com>"); |
| MODULE_LICENSE("Dual MIT/GPL"); |