| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Synopsys DesignWare PCIe host controller driver |
| * |
| * Copyright (C) 2013 Samsung Electronics Co., Ltd. |
| * https://www.samsung.com |
| * |
| * Author: Jingoo Han <jg1.han@samsung.com> |
| */ |
| |
| #include <linux/align.h> |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/dma/edma.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/ioport.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/sizes.h> |
| #include <linux/types.h> |
| |
| #include "../../pci.h" |
| #include "pcie-designware.h" |
| |
| static const char * const dw_pcie_app_clks[DW_PCIE_NUM_APP_CLKS] = { |
| [DW_PCIE_DBI_CLK] = "dbi", |
| [DW_PCIE_MSTR_CLK] = "mstr", |
| [DW_PCIE_SLV_CLK] = "slv", |
| }; |
| |
| static const char * const dw_pcie_core_clks[DW_PCIE_NUM_CORE_CLKS] = { |
| [DW_PCIE_PIPE_CLK] = "pipe", |
| [DW_PCIE_CORE_CLK] = "core", |
| [DW_PCIE_AUX_CLK] = "aux", |
| [DW_PCIE_REF_CLK] = "ref", |
| }; |
| |
| static const char * const dw_pcie_app_rsts[DW_PCIE_NUM_APP_RSTS] = { |
| [DW_PCIE_DBI_RST] = "dbi", |
| [DW_PCIE_MSTR_RST] = "mstr", |
| [DW_PCIE_SLV_RST] = "slv", |
| }; |
| |
| static const char * const dw_pcie_core_rsts[DW_PCIE_NUM_CORE_RSTS] = { |
| [DW_PCIE_NON_STICKY_RST] = "non-sticky", |
| [DW_PCIE_STICKY_RST] = "sticky", |
| [DW_PCIE_CORE_RST] = "core", |
| [DW_PCIE_PIPE_RST] = "pipe", |
| [DW_PCIE_PHY_RST] = "phy", |
| [DW_PCIE_HOT_RST] = "hot", |
| [DW_PCIE_PWR_RST] = "pwr", |
| }; |
| |
| static int dw_pcie_get_clocks(struct dw_pcie *pci) |
| { |
| int i, ret; |
| |
| for (i = 0; i < DW_PCIE_NUM_APP_CLKS; i++) |
| pci->app_clks[i].id = dw_pcie_app_clks[i]; |
| |
| for (i = 0; i < DW_PCIE_NUM_CORE_CLKS; i++) |
| pci->core_clks[i].id = dw_pcie_core_clks[i]; |
| |
| ret = devm_clk_bulk_get_optional(pci->dev, DW_PCIE_NUM_APP_CLKS, |
| pci->app_clks); |
| if (ret) |
| return ret; |
| |
| return devm_clk_bulk_get_optional(pci->dev, DW_PCIE_NUM_CORE_CLKS, |
| pci->core_clks); |
| } |
| |
| static int dw_pcie_get_resets(struct dw_pcie *pci) |
| { |
| int i, ret; |
| |
| for (i = 0; i < DW_PCIE_NUM_APP_RSTS; i++) |
| pci->app_rsts[i].id = dw_pcie_app_rsts[i]; |
| |
| for (i = 0; i < DW_PCIE_NUM_CORE_RSTS; i++) |
| pci->core_rsts[i].id = dw_pcie_core_rsts[i]; |
| |
| ret = devm_reset_control_bulk_get_optional_shared(pci->dev, |
| DW_PCIE_NUM_APP_RSTS, |
| pci->app_rsts); |
| if (ret) |
| return ret; |
| |
| ret = devm_reset_control_bulk_get_optional_exclusive(pci->dev, |
| DW_PCIE_NUM_CORE_RSTS, |
| pci->core_rsts); |
| if (ret) |
| return ret; |
| |
| pci->pe_rst = devm_gpiod_get_optional(pci->dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(pci->pe_rst)) |
| return PTR_ERR(pci->pe_rst); |
| |
| return 0; |
| } |
| |
| int dw_pcie_get_resources(struct dw_pcie *pci) |
| { |
| struct platform_device *pdev = to_platform_device(pci->dev); |
| struct device_node *np = dev_of_node(pci->dev); |
| struct resource *res; |
| int ret; |
| |
| if (!pci->dbi_base) { |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi"); |
| pci->dbi_base = devm_pci_remap_cfg_resource(pci->dev, res); |
| if (IS_ERR(pci->dbi_base)) |
| return PTR_ERR(pci->dbi_base); |
| } |
| |
| /* DBI2 is mainly useful for the endpoint controller */ |
| if (!pci->dbi_base2) { |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi2"); |
| if (res) { |
| pci->dbi_base2 = devm_pci_remap_cfg_resource(pci->dev, res); |
| if (IS_ERR(pci->dbi_base2)) |
| return PTR_ERR(pci->dbi_base2); |
| } else { |
| pci->dbi_base2 = pci->dbi_base + SZ_4K; |
| } |
| } |
| |
| /* For non-unrolled iATU/eDMA platforms this range will be ignored */ |
| if (!pci->atu_base) { |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "atu"); |
| if (res) { |
| pci->atu_size = resource_size(res); |
| pci->atu_base = devm_ioremap_resource(pci->dev, res); |
| if (IS_ERR(pci->atu_base)) |
| return PTR_ERR(pci->atu_base); |
| } else { |
| pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET; |
| } |
| } |
| |
| /* Set a default value suitable for at most 8 in and 8 out windows */ |
| if (!pci->atu_size) |
| pci->atu_size = SZ_4K; |
| |
| /* eDMA region can be mapped to a custom base address */ |
| if (!pci->edma.reg_base) { |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma"); |
| if (res) { |
| pci->edma.reg_base = devm_ioremap_resource(pci->dev, res); |
| if (IS_ERR(pci->edma.reg_base)) |
| return PTR_ERR(pci->edma.reg_base); |
| } else if (pci->atu_size >= 2 * DEFAULT_DBI_DMA_OFFSET) { |
| pci->edma.reg_base = pci->atu_base + DEFAULT_DBI_DMA_OFFSET; |
| } |
| } |
| |
| /* LLDD is supposed to manually switch the clocks and resets state */ |
| if (dw_pcie_cap_is(pci, REQ_RES)) { |
| ret = dw_pcie_get_clocks(pci); |
| if (ret) |
| return ret; |
| |
| ret = dw_pcie_get_resets(pci); |
| if (ret) |
| return ret; |
| } |
| |
| if (pci->link_gen < 1) |
| pci->link_gen = of_pci_get_max_link_speed(np); |
| |
| of_property_read_u32(np, "num-lanes", &pci->num_lanes); |
| |
| if (of_property_read_bool(np, "snps,enable-cdm-check")) |
| dw_pcie_cap_set(pci, CDM_CHECK); |
| |
| return 0; |
| } |
| |
| void dw_pcie_version_detect(struct dw_pcie *pci) |
| { |
| u32 ver; |
| |
| /* The content of the CSR is zero on DWC PCIe older than v4.70a */ |
| ver = dw_pcie_readl_dbi(pci, PCIE_VERSION_NUMBER); |
| if (!ver) |
| return; |
| |
| if (pci->version && pci->version != ver) |
| dev_warn(pci->dev, "Versions don't match (%08x != %08x)\n", |
| pci->version, ver); |
| else |
| pci->version = ver; |
| |
| ver = dw_pcie_readl_dbi(pci, PCIE_VERSION_TYPE); |
| |
| if (pci->type && pci->type != ver) |
| dev_warn(pci->dev, "Types don't match (%08x != %08x)\n", |
| pci->type, ver); |
| else |
| pci->type = ver; |
| } |
| |
| /* |
| * These interfaces resemble the pci_find_*capability() interfaces, but these |
| * are for configuring host controllers, which are bridges *to* PCI devices but |
| * are not PCI devices themselves. |
| */ |
| static u8 __dw_pcie_find_next_cap(struct dw_pcie *pci, u8 cap_ptr, |
| u8 cap) |
| { |
| u8 cap_id, next_cap_ptr; |
| u16 reg; |
| |
| if (!cap_ptr) |
| return 0; |
| |
| reg = dw_pcie_readw_dbi(pci, cap_ptr); |
| cap_id = (reg & 0x00ff); |
| |
| if (cap_id > PCI_CAP_ID_MAX) |
| return 0; |
| |
| if (cap_id == cap) |
| return cap_ptr; |
| |
| next_cap_ptr = (reg & 0xff00) >> 8; |
| return __dw_pcie_find_next_cap(pci, next_cap_ptr, cap); |
| } |
| |
| u8 dw_pcie_find_capability(struct dw_pcie *pci, u8 cap) |
| { |
| u8 next_cap_ptr; |
| u16 reg; |
| |
| reg = dw_pcie_readw_dbi(pci, PCI_CAPABILITY_LIST); |
| next_cap_ptr = (reg & 0x00ff); |
| |
| return __dw_pcie_find_next_cap(pci, next_cap_ptr, cap); |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_find_capability); |
| |
| static u16 dw_pcie_find_next_ext_capability(struct dw_pcie *pci, u16 start, |
| u8 cap) |
| { |
| u32 header; |
| int ttl; |
| int pos = PCI_CFG_SPACE_SIZE; |
| |
| /* minimum 8 bytes per capability */ |
| ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8; |
| |
| if (start) |
| pos = start; |
| |
| header = dw_pcie_readl_dbi(pci, pos); |
| /* |
| * If we have no capabilities, this is indicated by cap ID, |
| * cap version and next pointer all being 0. |
| */ |
| if (header == 0) |
| return 0; |
| |
| while (ttl-- > 0) { |
| if (PCI_EXT_CAP_ID(header) == cap && pos != start) |
| return pos; |
| |
| pos = PCI_EXT_CAP_NEXT(header); |
| if (pos < PCI_CFG_SPACE_SIZE) |
| break; |
| |
| header = dw_pcie_readl_dbi(pci, pos); |
| } |
| |
| return 0; |
| } |
| |
| u16 dw_pcie_find_ext_capability(struct dw_pcie *pci, u8 cap) |
| { |
| return dw_pcie_find_next_ext_capability(pci, 0, cap); |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_find_ext_capability); |
| |
| int dw_pcie_read(void __iomem *addr, int size, u32 *val) |
| { |
| if (!IS_ALIGNED((uintptr_t)addr, size)) { |
| *val = 0; |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| } |
| |
| if (size == 4) { |
| *val = readl(addr); |
| } else if (size == 2) { |
| *val = readw(addr); |
| } else if (size == 1) { |
| *val = readb(addr); |
| } else { |
| *val = 0; |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_read); |
| |
| int dw_pcie_write(void __iomem *addr, int size, u32 val) |
| { |
| if (!IS_ALIGNED((uintptr_t)addr, size)) |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| if (size == 4) |
| writel(val, addr); |
| else if (size == 2) |
| writew(val, addr); |
| else if (size == 1) |
| writeb(val, addr); |
| else |
| return PCIBIOS_BAD_REGISTER_NUMBER; |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_write); |
| |
| u32 dw_pcie_read_dbi(struct dw_pcie *pci, u32 reg, size_t size) |
| { |
| int ret; |
| u32 val; |
| |
| if (pci->ops && pci->ops->read_dbi) |
| return pci->ops->read_dbi(pci, pci->dbi_base, reg, size); |
| |
| ret = dw_pcie_read(pci->dbi_base + reg, size, &val); |
| if (ret) |
| dev_err(pci->dev, "Read DBI address failed\n"); |
| |
| return val; |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_read_dbi); |
| |
| void dw_pcie_write_dbi(struct dw_pcie *pci, u32 reg, size_t size, u32 val) |
| { |
| int ret; |
| |
| if (pci->ops && pci->ops->write_dbi) { |
| pci->ops->write_dbi(pci, pci->dbi_base, reg, size, val); |
| return; |
| } |
| |
| ret = dw_pcie_write(pci->dbi_base + reg, size, val); |
| if (ret) |
| dev_err(pci->dev, "Write DBI address failed\n"); |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_write_dbi); |
| |
| void dw_pcie_write_dbi2(struct dw_pcie *pci, u32 reg, size_t size, u32 val) |
| { |
| int ret; |
| |
| if (pci->ops && pci->ops->write_dbi2) { |
| pci->ops->write_dbi2(pci, pci->dbi_base2, reg, size, val); |
| return; |
| } |
| |
| ret = dw_pcie_write(pci->dbi_base2 + reg, size, val); |
| if (ret) |
| dev_err(pci->dev, "write DBI address failed\n"); |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_write_dbi2); |
| |
| static inline void __iomem *dw_pcie_select_atu(struct dw_pcie *pci, u32 dir, |
| u32 index) |
| { |
| if (dw_pcie_cap_is(pci, IATU_UNROLL)) |
| return pci->atu_base + PCIE_ATU_UNROLL_BASE(dir, index); |
| |
| dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, dir | index); |
| return pci->atu_base; |
| } |
| |
| static u32 dw_pcie_readl_atu(struct dw_pcie *pci, u32 dir, u32 index, u32 reg) |
| { |
| void __iomem *base; |
| int ret; |
| u32 val; |
| |
| base = dw_pcie_select_atu(pci, dir, index); |
| |
| if (pci->ops && pci->ops->read_dbi) |
| return pci->ops->read_dbi(pci, base, reg, 4); |
| |
| ret = dw_pcie_read(base + reg, 4, &val); |
| if (ret) |
| dev_err(pci->dev, "Read ATU address failed\n"); |
| |
| return val; |
| } |
| |
| static void dw_pcie_writel_atu(struct dw_pcie *pci, u32 dir, u32 index, |
| u32 reg, u32 val) |
| { |
| void __iomem *base; |
| int ret; |
| |
| base = dw_pcie_select_atu(pci, dir, index); |
| |
| if (pci->ops && pci->ops->write_dbi) { |
| pci->ops->write_dbi(pci, base, reg, 4, val); |
| return; |
| } |
| |
| ret = dw_pcie_write(base + reg, 4, val); |
| if (ret) |
| dev_err(pci->dev, "Write ATU address failed\n"); |
| } |
| |
| static inline u32 dw_pcie_readl_atu_ob(struct dw_pcie *pci, u32 index, u32 reg) |
| { |
| return dw_pcie_readl_atu(pci, PCIE_ATU_REGION_DIR_OB, index, reg); |
| } |
| |
| static inline void dw_pcie_writel_atu_ob(struct dw_pcie *pci, u32 index, u32 reg, |
| u32 val) |
| { |
| dw_pcie_writel_atu(pci, PCIE_ATU_REGION_DIR_OB, index, reg, val); |
| } |
| |
| static inline u32 dw_pcie_enable_ecrc(u32 val) |
| { |
| /* |
| * DesignWare core version 4.90A has a design issue where the 'TD' |
| * bit in the Control register-1 of the ATU outbound region acts |
| * like an override for the ECRC setting, i.e., the presence of TLP |
| * Digest (ECRC) in the outgoing TLPs is solely determined by this |
| * bit. This is contrary to the PCIe spec which says that the |
| * enablement of the ECRC is solely determined by the AER |
| * registers. |
| * |
| * Because of this, even when the ECRC is enabled through AER |
| * registers, the transactions going through ATU won't have TLP |
| * Digest as there is no way the PCI core AER code could program |
| * the TD bit which is specific to the DesignWare core. |
| * |
| * The best way to handle this scenario is to program the TD bit |
| * always. It affects only the traffic from root port to downstream |
| * devices. |
| * |
| * At this point, |
| * When ECRC is enabled in AER registers, everything works normally |
| * When ECRC is NOT enabled in AER registers, then, |
| * on Root Port:- TLP Digest (DWord size) gets appended to each packet |
| * even through it is not required. Since downstream |
| * TLPs are mostly for configuration accesses and BAR |
| * accesses, they are not in critical path and won't |
| * have much negative effect on the performance. |
| * on End Point:- TLP Digest is received for some/all the packets coming |
| * from the root port. TLP Digest is ignored because, |
| * as per the PCIe Spec r5.0 v1.0 section 2.2.3 |
| * "TLP Digest Rules", when an endpoint receives TLP |
| * Digest when its ECRC check functionality is disabled |
| * in AER registers, received TLP Digest is just ignored. |
| * Since there is no issue or error reported either side, best way to |
| * handle the scenario is to program TD bit by default. |
| */ |
| |
| return val | PCIE_ATU_TD; |
| } |
| |
| static int __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no, |
| int index, int type, u64 cpu_addr, |
| u64 pci_addr, u64 size) |
| { |
| u32 retries, val; |
| u64 limit_addr; |
| |
| if (pci->ops && pci->ops->cpu_addr_fixup) |
| cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr); |
| |
| limit_addr = cpu_addr + size - 1; |
| |
| if ((limit_addr & ~pci->region_limit) != (cpu_addr & ~pci->region_limit) || |
| !IS_ALIGNED(cpu_addr, pci->region_align) || |
| !IS_ALIGNED(pci_addr, pci->region_align) || !size) { |
| return -EINVAL; |
| } |
| |
| dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_LOWER_BASE, |
| lower_32_bits(cpu_addr)); |
| dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_UPPER_BASE, |
| upper_32_bits(cpu_addr)); |
| |
| dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_LIMIT, |
| lower_32_bits(limit_addr)); |
| if (dw_pcie_ver_is_ge(pci, 460A)) |
| dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_UPPER_LIMIT, |
| upper_32_bits(limit_addr)); |
| |
| dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_LOWER_TARGET, |
| lower_32_bits(pci_addr)); |
| dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_UPPER_TARGET, |
| upper_32_bits(pci_addr)); |
| |
| val = type | PCIE_ATU_FUNC_NUM(func_no); |
| if (upper_32_bits(limit_addr) > upper_32_bits(cpu_addr) && |
| dw_pcie_ver_is_ge(pci, 460A)) |
| val |= PCIE_ATU_INCREASE_REGION_SIZE; |
| if (dw_pcie_ver_is(pci, 490A)) |
| val = dw_pcie_enable_ecrc(val); |
| dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL1, val); |
| |
| dw_pcie_writel_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2, PCIE_ATU_ENABLE); |
| |
| /* |
| * Make sure ATU enable takes effect before any subsequent config |
| * and I/O accesses. |
| */ |
| for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) { |
| val = dw_pcie_readl_atu_ob(pci, index, PCIE_ATU_REGION_CTRL2); |
| if (val & PCIE_ATU_ENABLE) |
| return 0; |
| |
| mdelay(LINK_WAIT_IATU); |
| } |
| |
| dev_err(pci->dev, "Outbound iATU is not being enabled\n"); |
| |
| return -ETIMEDOUT; |
| } |
| |
| int dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type, |
| u64 cpu_addr, u64 pci_addr, u64 size) |
| { |
| return __dw_pcie_prog_outbound_atu(pci, 0, index, type, |
| cpu_addr, pci_addr, size); |
| } |
| |
| int dw_pcie_prog_ep_outbound_atu(struct dw_pcie *pci, u8 func_no, int index, |
| int type, u64 cpu_addr, u64 pci_addr, |
| u64 size) |
| { |
| return __dw_pcie_prog_outbound_atu(pci, func_no, index, type, |
| cpu_addr, pci_addr, size); |
| } |
| |
| static inline u32 dw_pcie_readl_atu_ib(struct dw_pcie *pci, u32 index, u32 reg) |
| { |
| return dw_pcie_readl_atu(pci, PCIE_ATU_REGION_DIR_IB, index, reg); |
| } |
| |
| static inline void dw_pcie_writel_atu_ib(struct dw_pcie *pci, u32 index, u32 reg, |
| u32 val) |
| { |
| dw_pcie_writel_atu(pci, PCIE_ATU_REGION_DIR_IB, index, reg, val); |
| } |
| |
| int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int type, |
| u64 cpu_addr, u64 pci_addr, u64 size) |
| { |
| u64 limit_addr = pci_addr + size - 1; |
| u32 retries, val; |
| |
| if ((limit_addr & ~pci->region_limit) != (pci_addr & ~pci->region_limit) || |
| !IS_ALIGNED(cpu_addr, pci->region_align) || |
| !IS_ALIGNED(pci_addr, pci->region_align) || !size) { |
| return -EINVAL; |
| } |
| |
| dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_LOWER_BASE, |
| lower_32_bits(pci_addr)); |
| dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_UPPER_BASE, |
| upper_32_bits(pci_addr)); |
| |
| dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_LIMIT, |
| lower_32_bits(limit_addr)); |
| if (dw_pcie_ver_is_ge(pci, 460A)) |
| dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_UPPER_LIMIT, |
| upper_32_bits(limit_addr)); |
| |
| dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_LOWER_TARGET, |
| lower_32_bits(cpu_addr)); |
| dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_UPPER_TARGET, |
| upper_32_bits(cpu_addr)); |
| |
| val = type; |
| if (upper_32_bits(limit_addr) > upper_32_bits(pci_addr) && |
| dw_pcie_ver_is_ge(pci, 460A)) |
| val |= PCIE_ATU_INCREASE_REGION_SIZE; |
| dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_REGION_CTRL1, val); |
| dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_REGION_CTRL2, PCIE_ATU_ENABLE); |
| |
| /* |
| * Make sure ATU enable takes effect before any subsequent config |
| * and I/O accesses. |
| */ |
| for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) { |
| val = dw_pcie_readl_atu_ib(pci, index, PCIE_ATU_REGION_CTRL2); |
| if (val & PCIE_ATU_ENABLE) |
| return 0; |
| |
| mdelay(LINK_WAIT_IATU); |
| } |
| |
| dev_err(pci->dev, "Inbound iATU is not being enabled\n"); |
| |
| return -ETIMEDOUT; |
| } |
| |
| int dw_pcie_prog_ep_inbound_atu(struct dw_pcie *pci, u8 func_no, int index, |
| int type, u64 cpu_addr, u8 bar) |
| { |
| u32 retries, val; |
| |
| if (!IS_ALIGNED(cpu_addr, pci->region_align)) |
| return -EINVAL; |
| |
| dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_LOWER_TARGET, |
| lower_32_bits(cpu_addr)); |
| dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_UPPER_TARGET, |
| upper_32_bits(cpu_addr)); |
| |
| dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_REGION_CTRL1, type | |
| PCIE_ATU_FUNC_NUM(func_no)); |
| dw_pcie_writel_atu_ib(pci, index, PCIE_ATU_REGION_CTRL2, |
| PCIE_ATU_ENABLE | PCIE_ATU_FUNC_NUM_MATCH_EN | |
| PCIE_ATU_BAR_MODE_ENABLE | (bar << 8)); |
| |
| /* |
| * Make sure ATU enable takes effect before any subsequent config |
| * and I/O accesses. |
| */ |
| for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) { |
| val = dw_pcie_readl_atu_ib(pci, index, PCIE_ATU_REGION_CTRL2); |
| if (val & PCIE_ATU_ENABLE) |
| return 0; |
| |
| mdelay(LINK_WAIT_IATU); |
| } |
| |
| dev_err(pci->dev, "Inbound iATU is not being enabled\n"); |
| |
| return -ETIMEDOUT; |
| } |
| |
| void dw_pcie_disable_atu(struct dw_pcie *pci, u32 dir, int index) |
| { |
| dw_pcie_writel_atu(pci, dir, index, PCIE_ATU_REGION_CTRL2, 0); |
| } |
| |
| int dw_pcie_wait_for_link(struct dw_pcie *pci) |
| { |
| u32 offset, val; |
| int retries; |
| |
| /* Check if the link is up or not */ |
| for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) { |
| if (dw_pcie_link_up(pci)) |
| break; |
| |
| usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX); |
| } |
| |
| if (retries >= LINK_WAIT_MAX_RETRIES) { |
| dev_info(pci->dev, "Phy link never came up\n"); |
| return -ETIMEDOUT; |
| } |
| |
| offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); |
| val = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA); |
| |
| dev_info(pci->dev, "PCIe Gen.%u x%u link up\n", |
| FIELD_GET(PCI_EXP_LNKSTA_CLS, val), |
| FIELD_GET(PCI_EXP_LNKSTA_NLW, val)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_wait_for_link); |
| |
| int dw_pcie_link_up(struct dw_pcie *pci) |
| { |
| u32 val; |
| |
| if (pci->ops && pci->ops->link_up) |
| return pci->ops->link_up(pci); |
| |
| val = dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1); |
| return ((val & PCIE_PORT_DEBUG1_LINK_UP) && |
| (!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING))); |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_link_up); |
| |
| void dw_pcie_upconfig_setup(struct dw_pcie *pci) |
| { |
| u32 val; |
| |
| val = dw_pcie_readl_dbi(pci, PCIE_PORT_MULTI_LANE_CTRL); |
| val |= PORT_MLTI_UPCFG_SUPPORT; |
| dw_pcie_writel_dbi(pci, PCIE_PORT_MULTI_LANE_CTRL, val); |
| } |
| EXPORT_SYMBOL_GPL(dw_pcie_upconfig_setup); |
| |
| static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen) |
| { |
| u32 cap, ctrl2, link_speed; |
| u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); |
| |
| cap = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP); |
| ctrl2 = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL2); |
| ctrl2 &= ~PCI_EXP_LNKCTL2_TLS; |
| |
| switch (pcie_link_speed[link_gen]) { |
| case PCIE_SPEED_2_5GT: |
| link_speed = PCI_EXP_LNKCTL2_TLS_2_5GT; |
| break; |
| case PCIE_SPEED_5_0GT: |
| link_speed = PCI_EXP_LNKCTL2_TLS_5_0GT; |
| break; |
| case PCIE_SPEED_8_0GT: |
| link_speed = PCI_EXP_LNKCTL2_TLS_8_0GT; |
| break; |
| case PCIE_SPEED_16_0GT: |
| link_speed = PCI_EXP_LNKCTL2_TLS_16_0GT; |
| break; |
| default: |
| /* Use hardware capability */ |
| link_speed = FIELD_GET(PCI_EXP_LNKCAP_SLS, cap); |
| ctrl2 &= ~PCI_EXP_LNKCTL2_HASD; |
| break; |
| } |
| |
| dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL2, ctrl2 | link_speed); |
| |
| cap &= ~((u32)PCI_EXP_LNKCAP_SLS); |
| dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, cap | link_speed); |
| |
| } |
| |
| static void dw_pcie_link_set_max_link_width(struct dw_pcie *pci, u32 num_lanes) |
| { |
| u32 lnkcap, lwsc, plc; |
| u8 cap; |
| |
| if (!num_lanes) |
| return; |
| |
| /* Set the number of lanes */ |
| plc = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL); |
| plc &= ~PORT_LINK_FAST_LINK_MODE; |
| plc &= ~PORT_LINK_MODE_MASK; |
| |
| /* Set link width speed control register */ |
| lwsc = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); |
| lwsc &= ~PORT_LOGIC_LINK_WIDTH_MASK; |
| switch (num_lanes) { |
| case 1: |
| plc |= PORT_LINK_MODE_1_LANES; |
| lwsc |= PORT_LOGIC_LINK_WIDTH_1_LANES; |
| break; |
| case 2: |
| plc |= PORT_LINK_MODE_2_LANES; |
| lwsc |= PORT_LOGIC_LINK_WIDTH_2_LANES; |
| break; |
| case 4: |
| plc |= PORT_LINK_MODE_4_LANES; |
| lwsc |= PORT_LOGIC_LINK_WIDTH_4_LANES; |
| break; |
| case 8: |
| plc |= PORT_LINK_MODE_8_LANES; |
| lwsc |= PORT_LOGIC_LINK_WIDTH_8_LANES; |
| break; |
| default: |
| dev_err(pci->dev, "num-lanes %u: invalid value\n", num_lanes); |
| return; |
| } |
| dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, plc); |
| dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, lwsc); |
| |
| cap = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP); |
| lnkcap = dw_pcie_readl_dbi(pci, cap + PCI_EXP_LNKCAP); |
| lnkcap &= ~PCI_EXP_LNKCAP_MLW; |
| lnkcap |= FIELD_PREP(PCI_EXP_LNKCAP_MLW, num_lanes); |
| dw_pcie_writel_dbi(pci, cap + PCI_EXP_LNKCAP, lnkcap); |
| } |
| |
| void dw_pcie_iatu_detect(struct dw_pcie *pci) |
| { |
| int max_region, ob, ib; |
| u32 val, min, dir; |
| u64 max; |
| |
| val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT); |
| if (val == 0xFFFFFFFF) { |
| dw_pcie_cap_set(pci, IATU_UNROLL); |
| |
| max_region = min((int)pci->atu_size / 512, 256); |
| } else { |
| pci->atu_base = pci->dbi_base + PCIE_ATU_VIEWPORT_BASE; |
| pci->atu_size = PCIE_ATU_VIEWPORT_SIZE; |
| |
| dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, 0xFF); |
| max_region = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT) + 1; |
| } |
| |
| for (ob = 0; ob < max_region; ob++) { |
| dw_pcie_writel_atu_ob(pci, ob, PCIE_ATU_LOWER_TARGET, 0x11110000); |
| val = dw_pcie_readl_atu_ob(pci, ob, PCIE_ATU_LOWER_TARGET); |
| if (val != 0x11110000) |
| break; |
| } |
| |
| for (ib = 0; ib < max_region; ib++) { |
| dw_pcie_writel_atu_ib(pci, ib, PCIE_ATU_LOWER_TARGET, 0x11110000); |
| val = dw_pcie_readl_atu_ib(pci, ib, PCIE_ATU_LOWER_TARGET); |
| if (val != 0x11110000) |
| break; |
| } |
| |
| if (ob) { |
| dir = PCIE_ATU_REGION_DIR_OB; |
| } else if (ib) { |
| dir = PCIE_ATU_REGION_DIR_IB; |
| } else { |
| dev_err(pci->dev, "No iATU regions found\n"); |
| return; |
| } |
| |
| dw_pcie_writel_atu(pci, dir, 0, PCIE_ATU_LIMIT, 0x0); |
| min = dw_pcie_readl_atu(pci, dir, 0, PCIE_ATU_LIMIT); |
| |
| if (dw_pcie_ver_is_ge(pci, 460A)) { |
| dw_pcie_writel_atu(pci, dir, 0, PCIE_ATU_UPPER_LIMIT, 0xFFFFFFFF); |
| max = dw_pcie_readl_atu(pci, dir, 0, PCIE_ATU_UPPER_LIMIT); |
| } else { |
| max = 0; |
| } |
| |
| pci->num_ob_windows = ob; |
| pci->num_ib_windows = ib; |
| pci->region_align = 1 << fls(min); |
| pci->region_limit = (max << 32) | (SZ_4G - 1); |
| |
| dev_info(pci->dev, "iATU: unroll %s, %u ob, %u ib, align %uK, limit %lluG\n", |
| dw_pcie_cap_is(pci, IATU_UNROLL) ? "T" : "F", |
| pci->num_ob_windows, pci->num_ib_windows, |
| pci->region_align / SZ_1K, (pci->region_limit + 1) / SZ_1G); |
| } |
| |
| static u32 dw_pcie_readl_dma(struct dw_pcie *pci, u32 reg) |
| { |
| u32 val = 0; |
| int ret; |
| |
| if (pci->ops && pci->ops->read_dbi) |
| return pci->ops->read_dbi(pci, pci->edma.reg_base, reg, 4); |
| |
| ret = dw_pcie_read(pci->edma.reg_base + reg, 4, &val); |
| if (ret) |
| dev_err(pci->dev, "Read DMA address failed\n"); |
| |
| return val; |
| } |
| |
| static int dw_pcie_edma_irq_vector(struct device *dev, unsigned int nr) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| char name[6]; |
| int ret; |
| |
| if (nr >= EDMA_MAX_WR_CH + EDMA_MAX_RD_CH) |
| return -EINVAL; |
| |
| ret = platform_get_irq_byname_optional(pdev, "dma"); |
| if (ret > 0) |
| return ret; |
| |
| snprintf(name, sizeof(name), "dma%u", nr); |
| |
| return platform_get_irq_byname_optional(pdev, name); |
| } |
| |
| static struct dw_edma_plat_ops dw_pcie_edma_ops = { |
| .irq_vector = dw_pcie_edma_irq_vector, |
| }; |
| |
| static int dw_pcie_edma_find_chip(struct dw_pcie *pci) |
| { |
| u32 val; |
| |
| /* |
| * Indirect eDMA CSRs access has been completely removed since v5.40a |
| * thus no space is now reserved for the eDMA channels viewport and |
| * former DMA CTRL register is no longer fixed to FFs. |
| * |
| * Note that Renesas R-Car S4-8's PCIe controllers for unknown reason |
| * have zeros in the eDMA CTRL register even though the HW-manual |
| * explicitly states there must FFs if the unrolled mapping is enabled. |
| * For such cases the low-level drivers are supposed to manually |
| * activate the unrolled mapping to bypass the auto-detection procedure. |
| */ |
| if (dw_pcie_ver_is_ge(pci, 540A) || dw_pcie_cap_is(pci, EDMA_UNROLL)) |
| val = 0xFFFFFFFF; |
| else |
| val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL); |
| |
| if (val == 0xFFFFFFFF && pci->edma.reg_base) { |
| pci->edma.mf = EDMA_MF_EDMA_UNROLL; |
| |
| val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL); |
| } else if (val != 0xFFFFFFFF) { |
| pci->edma.mf = EDMA_MF_EDMA_LEGACY; |
| |
| pci->edma.reg_base = pci->dbi_base + PCIE_DMA_VIEWPORT_BASE; |
| } else { |
| return -ENODEV; |
| } |
| |
| pci->edma.dev = pci->dev; |
| |
| if (!pci->edma.ops) |
| pci->edma.ops = &dw_pcie_edma_ops; |
| |
| pci->edma.flags |= DW_EDMA_CHIP_LOCAL; |
| |
| pci->edma.ll_wr_cnt = FIELD_GET(PCIE_DMA_NUM_WR_CHAN, val); |
| pci->edma.ll_rd_cnt = FIELD_GET(PCIE_DMA_NUM_RD_CHAN, val); |
| |
| /* Sanity check the channels count if the mapping was incorrect */ |
| if (!pci->edma.ll_wr_cnt || pci->edma.ll_wr_cnt > EDMA_MAX_WR_CH || |
| !pci->edma.ll_rd_cnt || pci->edma.ll_rd_cnt > EDMA_MAX_RD_CH) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int dw_pcie_edma_irq_verify(struct dw_pcie *pci) |
| { |
| struct platform_device *pdev = to_platform_device(pci->dev); |
| u16 ch_cnt = pci->edma.ll_wr_cnt + pci->edma.ll_rd_cnt; |
| char name[6]; |
| int ret; |
| |
| if (pci->edma.nr_irqs == 1) |
| return 0; |
| else if (pci->edma.nr_irqs > 1) |
| return pci->edma.nr_irqs != ch_cnt ? -EINVAL : 0; |
| |
| ret = platform_get_irq_byname_optional(pdev, "dma"); |
| if (ret > 0) { |
| pci->edma.nr_irqs = 1; |
| return 0; |
| } |
| |
| for (; pci->edma.nr_irqs < ch_cnt; pci->edma.nr_irqs++) { |
| snprintf(name, sizeof(name), "dma%d", pci->edma.nr_irqs); |
| |
| ret = platform_get_irq_byname_optional(pdev, name); |
| if (ret <= 0) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int dw_pcie_edma_ll_alloc(struct dw_pcie *pci) |
| { |
| struct dw_edma_region *ll; |
| dma_addr_t paddr; |
| int i; |
| |
| for (i = 0; i < pci->edma.ll_wr_cnt; i++) { |
| ll = &pci->edma.ll_region_wr[i]; |
| ll->sz = DMA_LLP_MEM_SIZE; |
| ll->vaddr.mem = dmam_alloc_coherent(pci->dev, ll->sz, |
| &paddr, GFP_KERNEL); |
| if (!ll->vaddr.mem) |
| return -ENOMEM; |
| |
| ll->paddr = paddr; |
| } |
| |
| for (i = 0; i < pci->edma.ll_rd_cnt; i++) { |
| ll = &pci->edma.ll_region_rd[i]; |
| ll->sz = DMA_LLP_MEM_SIZE; |
| ll->vaddr.mem = dmam_alloc_coherent(pci->dev, ll->sz, |
| &paddr, GFP_KERNEL); |
| if (!ll->vaddr.mem) |
| return -ENOMEM; |
| |
| ll->paddr = paddr; |
| } |
| |
| return 0; |
| } |
| |
| int dw_pcie_edma_detect(struct dw_pcie *pci) |
| { |
| int ret; |
| |
| /* Don't fail if no eDMA was found (for the backward compatibility) */ |
| ret = dw_pcie_edma_find_chip(pci); |
| if (ret) |
| return 0; |
| |
| /* Don't fail on the IRQs verification (for the backward compatibility) */ |
| ret = dw_pcie_edma_irq_verify(pci); |
| if (ret) { |
| dev_err(pci->dev, "Invalid eDMA IRQs found\n"); |
| return 0; |
| } |
| |
| ret = dw_pcie_edma_ll_alloc(pci); |
| if (ret) { |
| dev_err(pci->dev, "Couldn't allocate LLP memory\n"); |
| return ret; |
| } |
| |
| /* Don't fail if the DW eDMA driver can't find the device */ |
| ret = dw_edma_probe(&pci->edma); |
| if (ret && ret != -ENODEV) { |
| dev_err(pci->dev, "Couldn't register eDMA device\n"); |
| return ret; |
| } |
| |
| dev_info(pci->dev, "eDMA: unroll %s, %hu wr, %hu rd\n", |
| pci->edma.mf == EDMA_MF_EDMA_UNROLL ? "T" : "F", |
| pci->edma.ll_wr_cnt, pci->edma.ll_rd_cnt); |
| |
| return 0; |
| } |
| |
| void dw_pcie_edma_remove(struct dw_pcie *pci) |
| { |
| dw_edma_remove(&pci->edma); |
| } |
| |
| void dw_pcie_setup(struct dw_pcie *pci) |
| { |
| u32 val; |
| |
| if (pci->link_gen > 0) |
| dw_pcie_link_set_max_speed(pci, pci->link_gen); |
| |
| /* Configure Gen1 N_FTS */ |
| if (pci->n_fts[0]) { |
| val = dw_pcie_readl_dbi(pci, PCIE_PORT_AFR); |
| val &= ~(PORT_AFR_N_FTS_MASK | PORT_AFR_CC_N_FTS_MASK); |
| val |= PORT_AFR_N_FTS(pci->n_fts[0]); |
| val |= PORT_AFR_CC_N_FTS(pci->n_fts[0]); |
| dw_pcie_writel_dbi(pci, PCIE_PORT_AFR, val); |
| } |
| |
| /* Configure Gen2+ N_FTS */ |
| if (pci->n_fts[1]) { |
| val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL); |
| val &= ~PORT_LOGIC_N_FTS_MASK; |
| val |= pci->n_fts[1]; |
| dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val); |
| } |
| |
| if (dw_pcie_cap_is(pci, CDM_CHECK)) { |
| val = dw_pcie_readl_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS); |
| val |= PCIE_PL_CHK_REG_CHK_REG_CONTINUOUS | |
| PCIE_PL_CHK_REG_CHK_REG_START; |
| dw_pcie_writel_dbi(pci, PCIE_PL_CHK_REG_CONTROL_STATUS, val); |
| } |
| |
| val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL); |
| val &= ~PORT_LINK_FAST_LINK_MODE; |
| val |= PORT_LINK_DLL_LINK_EN; |
| dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val); |
| |
| dw_pcie_link_set_max_link_width(pci, pci->num_lanes); |
| } |