| /* |
| * SS1000/SC2000 interrupt handling. |
| * |
| * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) |
| * Heavily based on arch/sparc/kernel/irq.c. |
| */ |
| |
| #include <linux/kernel_stat.h> |
| #include <linux/seq_file.h> |
| |
| #include <asm/timer.h> |
| #include <asm/traps.h> |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| #include <asm/sbi.h> |
| #include <asm/cacheflush.h> |
| #include <asm/setup.h> |
| #include <asm/oplib.h> |
| |
| #include "kernel.h" |
| #include "irq.h" |
| |
| /* Sun4d interrupts fall roughly into two categories. SBUS and |
| * cpu local. CPU local interrupts cover the timer interrupts |
| * and whatnot, and we encode those as normal PILs between |
| * 0 and 15. |
| * SBUS interrupts are encodes as a combination of board, level and slot. |
| */ |
| |
| struct sun4d_handler_data { |
| unsigned int cpuid; /* target cpu */ |
| unsigned int real_irq; /* interrupt level */ |
| }; |
| |
| |
| static unsigned int sun4d_encode_irq(int board, int lvl, int slot) |
| { |
| return (board + 1) << 5 | (lvl << 2) | slot; |
| } |
| |
| struct sun4d_timer_regs { |
| u32 l10_timer_limit; |
| u32 l10_cur_countx; |
| u32 l10_limit_noclear; |
| u32 ctrl; |
| u32 l10_cur_count; |
| }; |
| |
| static struct sun4d_timer_regs __iomem *sun4d_timers; |
| |
| #define SUN4D_TIMER_IRQ 10 |
| |
| /* Specify which cpu handle interrupts from which board. |
| * Index is board - value is cpu. |
| */ |
| static unsigned char board_to_cpu[32]; |
| |
| static int pil_to_sbus[] = { |
| 0, |
| 0, |
| 1, |
| 2, |
| 0, |
| 3, |
| 0, |
| 4, |
| 0, |
| 5, |
| 0, |
| 6, |
| 0, |
| 7, |
| 0, |
| 0, |
| }; |
| |
| /* Exported for sun4d_smp.c */ |
| DEFINE_SPINLOCK(sun4d_imsk_lock); |
| |
| /* SBUS interrupts are encoded integers including the board number |
| * (plus one), the SBUS level, and the SBUS slot number. Sun4D |
| * IRQ dispatch is done by: |
| * |
| * 1) Reading the BW local interrupt table in order to get the bus |
| * interrupt mask. |
| * |
| * This table is indexed by SBUS interrupt level which can be |
| * derived from the PIL we got interrupted on. |
| * |
| * 2) For each bus showing interrupt pending from #1, read the |
| * SBI interrupt state register. This will indicate which slots |
| * have interrupts pending for that SBUS interrupt level. |
| * |
| * 3) Call the genreric IRQ support. |
| */ |
| static void sun4d_sbus_handler_irq(int sbusl) |
| { |
| unsigned int bus_mask; |
| unsigned int sbino, slot; |
| unsigned int sbil; |
| |
| bus_mask = bw_get_intr_mask(sbusl) & 0x3ffff; |
| bw_clear_intr_mask(sbusl, bus_mask); |
| |
| sbil = (sbusl << 2); |
| /* Loop for each pending SBI */ |
| for (sbino = 0; bus_mask; sbino++, bus_mask >>= 1) { |
| unsigned int idx, mask; |
| |
| if (!(bus_mask & 1)) |
| continue; |
| /* XXX This seems to ACK the irq twice. acquire_sbi() |
| * XXX uses swap, therefore this writes 0xf << sbil, |
| * XXX then later release_sbi() will write the individual |
| * XXX bits which were set again. |
| */ |
| mask = acquire_sbi(SBI2DEVID(sbino), 0xf << sbil); |
| mask &= (0xf << sbil); |
| |
| /* Loop for each pending SBI slot */ |
| slot = (1 << sbil); |
| for (idx = 0; mask != 0; idx++, slot <<= 1) { |
| unsigned int pil; |
| struct irq_bucket *p; |
| |
| if (!(mask & slot)) |
| continue; |
| |
| mask &= ~slot; |
| pil = sun4d_encode_irq(sbino, sbusl, idx); |
| |
| p = irq_map[pil]; |
| while (p) { |
| struct irq_bucket *next; |
| |
| next = p->next; |
| generic_handle_irq(p->irq); |
| p = next; |
| } |
| release_sbi(SBI2DEVID(sbino), slot); |
| } |
| } |
| } |
| |
| void sun4d_handler_irq(int pil, struct pt_regs *regs) |
| { |
| struct pt_regs *old_regs; |
| /* SBUS IRQ level (1 - 7) */ |
| int sbusl = pil_to_sbus[pil]; |
| |
| /* FIXME: Is this necessary?? */ |
| cc_get_ipen(); |
| |
| cc_set_iclr(1 << pil); |
| |
| #ifdef CONFIG_SMP |
| /* |
| * Check IPI data structures after IRQ has been cleared. Hard and Soft |
| * IRQ can happen at the same time, so both cases are always handled. |
| */ |
| if (pil == SUN4D_IPI_IRQ) |
| sun4d_ipi_interrupt(); |
| #endif |
| |
| old_regs = set_irq_regs(regs); |
| irq_enter(); |
| if (sbusl == 0) { |
| /* cpu interrupt */ |
| struct irq_bucket *p; |
| |
| p = irq_map[pil]; |
| while (p) { |
| struct irq_bucket *next; |
| |
| next = p->next; |
| generic_handle_irq(p->irq); |
| p = next; |
| } |
| } else { |
| /* SBUS interrupt */ |
| sun4d_sbus_handler_irq(sbusl); |
| } |
| irq_exit(); |
| set_irq_regs(old_regs); |
| } |
| |
| |
| static void sun4d_mask_irq(struct irq_data *data) |
| { |
| struct sun4d_handler_data *handler_data = data->handler_data; |
| unsigned int real_irq; |
| #ifdef CONFIG_SMP |
| int cpuid = handler_data->cpuid; |
| unsigned long flags; |
| #endif |
| real_irq = handler_data->real_irq; |
| #ifdef CONFIG_SMP |
| spin_lock_irqsave(&sun4d_imsk_lock, flags); |
| cc_set_imsk_other(cpuid, cc_get_imsk_other(cpuid) | (1 << real_irq)); |
| spin_unlock_irqrestore(&sun4d_imsk_lock, flags); |
| #else |
| cc_set_imsk(cc_get_imsk() | (1 << real_irq)); |
| #endif |
| } |
| |
| static void sun4d_unmask_irq(struct irq_data *data) |
| { |
| struct sun4d_handler_data *handler_data = data->handler_data; |
| unsigned int real_irq; |
| #ifdef CONFIG_SMP |
| int cpuid = handler_data->cpuid; |
| unsigned long flags; |
| #endif |
| real_irq = handler_data->real_irq; |
| |
| #ifdef CONFIG_SMP |
| spin_lock_irqsave(&sun4d_imsk_lock, flags); |
| cc_set_imsk_other(cpuid, cc_get_imsk_other(cpuid) & ~(1 << real_irq)); |
| spin_unlock_irqrestore(&sun4d_imsk_lock, flags); |
| #else |
| cc_set_imsk(cc_get_imsk() & ~(1 << real_irq)); |
| #endif |
| } |
| |
| static unsigned int sun4d_startup_irq(struct irq_data *data) |
| { |
| irq_link(data->irq); |
| sun4d_unmask_irq(data); |
| return 0; |
| } |
| |
| static void sun4d_shutdown_irq(struct irq_data *data) |
| { |
| sun4d_mask_irq(data); |
| irq_unlink(data->irq); |
| } |
| |
| struct irq_chip sun4d_irq = { |
| .name = "sun4d", |
| .irq_startup = sun4d_startup_irq, |
| .irq_shutdown = sun4d_shutdown_irq, |
| .irq_unmask = sun4d_unmask_irq, |
| .irq_mask = sun4d_mask_irq, |
| }; |
| |
| #ifdef CONFIG_SMP |
| /* Setup IRQ distribution scheme. */ |
| void __init sun4d_distribute_irqs(void) |
| { |
| struct device_node *dp; |
| |
| int cpuid = cpu_logical_map(1); |
| |
| if (cpuid == -1) |
| cpuid = cpu_logical_map(0); |
| for_each_node_by_name(dp, "sbi") { |
| int devid = of_getintprop_default(dp, "device-id", 0); |
| int board = of_getintprop_default(dp, "board#", 0); |
| board_to_cpu[board] = cpuid; |
| set_sbi_tid(devid, cpuid << 3); |
| } |
| printk(KERN_ERR "All sbus IRQs directed to CPU%d\n", cpuid); |
| } |
| #endif |
| |
| static void sun4d_clear_clock_irq(void) |
| { |
| sbus_readl(&sun4d_timers->l10_timer_limit); |
| } |
| |
| static void sun4d_load_profile_irq(int cpu, unsigned int limit) |
| { |
| unsigned int value = limit ? timer_value(limit) : 0; |
| bw_set_prof_limit(cpu, value); |
| } |
| |
| static void __init sun4d_load_profile_irqs(void) |
| { |
| int cpu = 0, mid; |
| |
| while (!cpu_find_by_instance(cpu, NULL, &mid)) { |
| sun4d_load_profile_irq(mid >> 3, 0); |
| cpu++; |
| } |
| } |
| |
| unsigned int _sun4d_build_device_irq(unsigned int real_irq, |
| unsigned int pil, |
| unsigned int board) |
| { |
| struct sun4d_handler_data *handler_data; |
| unsigned int irq; |
| |
| irq = irq_alloc(real_irq, pil); |
| if (irq == 0) { |
| prom_printf("IRQ: allocate for %d %d %d failed\n", |
| real_irq, pil, board); |
| goto err_out; |
| } |
| |
| handler_data = irq_get_handler_data(irq); |
| if (unlikely(handler_data)) |
| goto err_out; |
| |
| handler_data = kzalloc(sizeof(struct sun4d_handler_data), GFP_ATOMIC); |
| if (unlikely(!handler_data)) { |
| prom_printf("IRQ: kzalloc(sun4d_handler_data) failed.\n"); |
| prom_halt(); |
| } |
| handler_data->cpuid = board_to_cpu[board]; |
| handler_data->real_irq = real_irq; |
| irq_set_chip_and_handler_name(irq, &sun4d_irq, |
| handle_level_irq, "level"); |
| irq_set_handler_data(irq, handler_data); |
| |
| err_out: |
| return irq; |
| } |
| |
| |
| |
| unsigned int sun4d_build_device_irq(struct platform_device *op, |
| unsigned int real_irq) |
| { |
| struct device_node *dp = op->dev.of_node; |
| struct device_node *board_parent, *bus = dp->parent; |
| char *bus_connection; |
| const struct linux_prom_registers *regs; |
| unsigned int pil; |
| unsigned int irq; |
| int board, slot; |
| int sbusl; |
| |
| irq = real_irq; |
| while (bus) { |
| if (!strcmp(bus->name, "sbi")) { |
| bus_connection = "io-unit"; |
| break; |
| } |
| |
| if (!strcmp(bus->name, "bootbus")) { |
| bus_connection = "cpu-unit"; |
| break; |
| } |
| |
| bus = bus->parent; |
| } |
| if (!bus) |
| goto err_out; |
| |
| regs = of_get_property(dp, "reg", NULL); |
| if (!regs) |
| goto err_out; |
| |
| slot = regs->which_io; |
| |
| /* |
| * If Bus nodes parent is not io-unit/cpu-unit or the io-unit/cpu-unit |
| * lacks a "board#" property, something is very wrong. |
| */ |
| if (!bus->parent || strcmp(bus->parent->name, bus_connection)) { |
| printk(KERN_ERR "%s: Error, parent is not %s.\n", |
| bus->full_name, bus_connection); |
| goto err_out; |
| } |
| board_parent = bus->parent; |
| board = of_getintprop_default(board_parent, "board#", -1); |
| if (board == -1) { |
| printk(KERN_ERR "%s: Error, lacks board# property.\n", |
| board_parent->full_name); |
| goto err_out; |
| } |
| |
| sbusl = pil_to_sbus[real_irq]; |
| if (sbusl) |
| pil = sun4d_encode_irq(board, sbusl, slot); |
| else |
| pil = real_irq; |
| |
| irq = _sun4d_build_device_irq(real_irq, pil, board); |
| err_out: |
| return irq; |
| } |
| |
| unsigned int sun4d_build_timer_irq(unsigned int board, unsigned int real_irq) |
| { |
| return _sun4d_build_device_irq(real_irq, real_irq, board); |
| } |
| |
| |
| static void __init sun4d_fixup_trap_table(void) |
| { |
| #ifdef CONFIG_SMP |
| unsigned long flags; |
| struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)]; |
| |
| /* Adjust so that we jump directly to smp4d_ticker */ |
| lvl14_save[2] += smp4d_ticker - real_irq_entry; |
| |
| /* For SMP we use the level 14 ticker, however the bootup code |
| * has copied the firmware's level 14 vector into the boot cpu's |
| * trap table, we must fix this now or we get squashed. |
| */ |
| local_irq_save(flags); |
| patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */ |
| trap_table->inst_one = lvl14_save[0]; |
| trap_table->inst_two = lvl14_save[1]; |
| trap_table->inst_three = lvl14_save[2]; |
| trap_table->inst_four = lvl14_save[3]; |
| local_ops->cache_all(); |
| local_irq_restore(flags); |
| #endif |
| } |
| |
| static void __init sun4d_init_timers(void) |
| { |
| struct device_node *dp; |
| struct resource res; |
| unsigned int irq; |
| const u32 *reg; |
| int err; |
| int board; |
| |
| dp = of_find_node_by_name(NULL, "cpu-unit"); |
| if (!dp) { |
| prom_printf("sun4d_init_timers: Unable to find cpu-unit\n"); |
| prom_halt(); |
| } |
| |
| /* Which cpu-unit we use is arbitrary, we can view the bootbus timer |
| * registers via any cpu's mapping. The first 'reg' property is the |
| * bootbus. |
| */ |
| reg = of_get_property(dp, "reg", NULL); |
| if (!reg) { |
| prom_printf("sun4d_init_timers: No reg property\n"); |
| prom_halt(); |
| } |
| |
| board = of_getintprop_default(dp, "board#", -1); |
| if (board == -1) { |
| prom_printf("sun4d_init_timers: No board# property on cpu-unit\n"); |
| prom_halt(); |
| } |
| |
| of_node_put(dp); |
| |
| res.start = reg[1]; |
| res.end = reg[2] - 1; |
| res.flags = reg[0] & 0xff; |
| sun4d_timers = of_ioremap(&res, BW_TIMER_LIMIT, |
| sizeof(struct sun4d_timer_regs), "user timer"); |
| if (!sun4d_timers) { |
| prom_printf("sun4d_init_timers: Can't map timer regs\n"); |
| prom_halt(); |
| } |
| |
| #ifdef CONFIG_SMP |
| sparc_config.cs_period = SBUS_CLOCK_RATE * 2; /* 2 seconds */ |
| #else |
| sparc_config.cs_period = SBUS_CLOCK_RATE / HZ; /* 1/HZ sec */ |
| sparc_config.features |= FEAT_L10_CLOCKEVENT; |
| #endif |
| sparc_config.features |= FEAT_L10_CLOCKSOURCE; |
| sbus_writel(timer_value(sparc_config.cs_period), |
| &sun4d_timers->l10_timer_limit); |
| |
| master_l10_counter = &sun4d_timers->l10_cur_count; |
| |
| irq = sun4d_build_timer_irq(board, SUN4D_TIMER_IRQ); |
| err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL); |
| if (err) { |
| prom_printf("sun4d_init_timers: request_irq() failed with %d\n", |
| err); |
| prom_halt(); |
| } |
| sun4d_load_profile_irqs(); |
| sun4d_fixup_trap_table(); |
| } |
| |
| void __init sun4d_init_sbi_irq(void) |
| { |
| struct device_node *dp; |
| int target_cpu; |
| |
| target_cpu = boot_cpu_id; |
| for_each_node_by_name(dp, "sbi") { |
| int devid = of_getintprop_default(dp, "device-id", 0); |
| int board = of_getintprop_default(dp, "board#", 0); |
| unsigned int mask; |
| |
| set_sbi_tid(devid, target_cpu << 3); |
| board_to_cpu[board] = target_cpu; |
| |
| /* Get rid of pending irqs from PROM */ |
| mask = acquire_sbi(devid, 0xffffffff); |
| if (mask) { |
| printk(KERN_ERR "Clearing pending IRQs %08x on SBI %d\n", |
| mask, board); |
| release_sbi(devid, mask); |
| } |
| } |
| } |
| |
| void __init sun4d_init_IRQ(void) |
| { |
| local_irq_disable(); |
| |
| sparc_config.init_timers = sun4d_init_timers; |
| sparc_config.build_device_irq = sun4d_build_device_irq; |
| sparc_config.clock_rate = SBUS_CLOCK_RATE; |
| sparc_config.clear_clock_irq = sun4d_clear_clock_irq; |
| sparc_config.load_profile_irq = sun4d_load_profile_irq; |
| |
| /* Cannot enable interrupts until OBP ticker is disabled. */ |
| } |