| /* |
| * Copyright © 2009 - Maxim Levitsky |
| * driver for Ricoh xD readers |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/jiffies.h> |
| #include <linux/workqueue.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <asm/byteorder.h> |
| #include <linux/sched.h> |
| #include "sm_common.h" |
| #include "r852.h" |
| |
| |
| static bool r852_enable_dma = 1; |
| module_param(r852_enable_dma, bool, S_IRUGO); |
| MODULE_PARM_DESC(r852_enable_dma, "Enable usage of the DMA (default)"); |
| |
| static int debug; |
| module_param(debug, int, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(debug, "Debug level (0-2)"); |
| |
| /* read register */ |
| static inline uint8_t r852_read_reg(struct r852_device *dev, int address) |
| { |
| uint8_t reg = readb(dev->mmio + address); |
| return reg; |
| } |
| |
| /* write register */ |
| static inline void r852_write_reg(struct r852_device *dev, |
| int address, uint8_t value) |
| { |
| writeb(value, dev->mmio + address); |
| mmiowb(); |
| } |
| |
| |
| /* read dword sized register */ |
| static inline uint32_t r852_read_reg_dword(struct r852_device *dev, int address) |
| { |
| uint32_t reg = le32_to_cpu(readl(dev->mmio + address)); |
| return reg; |
| } |
| |
| /* write dword sized register */ |
| static inline void r852_write_reg_dword(struct r852_device *dev, |
| int address, uint32_t value) |
| { |
| writel(cpu_to_le32(value), dev->mmio + address); |
| mmiowb(); |
| } |
| |
| /* returns pointer to our private structure */ |
| static inline struct r852_device *r852_get_dev(struct mtd_info *mtd) |
| { |
| struct nand_chip *chip = mtd_to_nand(mtd); |
| return nand_get_controller_data(chip); |
| } |
| |
| |
| /* check if controller supports dma */ |
| static void r852_dma_test(struct r852_device *dev) |
| { |
| dev->dma_usable = (r852_read_reg(dev, R852_DMA_CAP) & |
| (R852_DMA1 | R852_DMA2)) == (R852_DMA1 | R852_DMA2); |
| |
| if (!dev->dma_usable) |
| message("Non dma capable device detected, dma disabled"); |
| |
| if (!r852_enable_dma) { |
| message("disabling dma on user request"); |
| dev->dma_usable = 0; |
| } |
| } |
| |
| /* |
| * Enable dma. Enables ether first or second stage of the DMA, |
| * Expects dev->dma_dir and dev->dma_state be set |
| */ |
| static void r852_dma_enable(struct r852_device *dev) |
| { |
| uint8_t dma_reg, dma_irq_reg; |
| |
| /* Set up dma settings */ |
| dma_reg = r852_read_reg_dword(dev, R852_DMA_SETTINGS); |
| dma_reg &= ~(R852_DMA_READ | R852_DMA_INTERNAL | R852_DMA_MEMORY); |
| |
| if (dev->dma_dir) |
| dma_reg |= R852_DMA_READ; |
| |
| if (dev->dma_state == DMA_INTERNAL) { |
| dma_reg |= R852_DMA_INTERNAL; |
| /* Precaution to make sure HW doesn't write */ |
| /* to random kernel memory */ |
| r852_write_reg_dword(dev, R852_DMA_ADDR, |
| cpu_to_le32(dev->phys_bounce_buffer)); |
| } else { |
| dma_reg |= R852_DMA_MEMORY; |
| r852_write_reg_dword(dev, R852_DMA_ADDR, |
| cpu_to_le32(dev->phys_dma_addr)); |
| } |
| |
| /* Precaution: make sure write reached the device */ |
| r852_read_reg_dword(dev, R852_DMA_ADDR); |
| |
| r852_write_reg_dword(dev, R852_DMA_SETTINGS, dma_reg); |
| |
| /* Set dma irq */ |
| dma_irq_reg = r852_read_reg_dword(dev, R852_DMA_IRQ_ENABLE); |
| r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE, |
| dma_irq_reg | |
| R852_DMA_IRQ_INTERNAL | |
| R852_DMA_IRQ_ERROR | |
| R852_DMA_IRQ_MEMORY); |
| } |
| |
| /* |
| * Disable dma, called from the interrupt handler, which specifies |
| * success of the operation via 'error' argument |
| */ |
| static void r852_dma_done(struct r852_device *dev, int error) |
| { |
| WARN_ON(dev->dma_stage == 0); |
| |
| r852_write_reg_dword(dev, R852_DMA_IRQ_STA, |
| r852_read_reg_dword(dev, R852_DMA_IRQ_STA)); |
| |
| r852_write_reg_dword(dev, R852_DMA_SETTINGS, 0); |
| r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE, 0); |
| |
| /* Precaution to make sure HW doesn't write to random kernel memory */ |
| r852_write_reg_dword(dev, R852_DMA_ADDR, |
| cpu_to_le32(dev->phys_bounce_buffer)); |
| r852_read_reg_dword(dev, R852_DMA_ADDR); |
| |
| dev->dma_error = error; |
| dev->dma_stage = 0; |
| |
| if (dev->phys_dma_addr && dev->phys_dma_addr != dev->phys_bounce_buffer) |
| pci_unmap_single(dev->pci_dev, dev->phys_dma_addr, R852_DMA_LEN, |
| dev->dma_dir ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE); |
| } |
| |
| /* |
| * Wait, till dma is done, which includes both phases of it |
| */ |
| static int r852_dma_wait(struct r852_device *dev) |
| { |
| long timeout = wait_for_completion_timeout(&dev->dma_done, |
| msecs_to_jiffies(1000)); |
| if (!timeout) { |
| dbg("timeout waiting for DMA interrupt"); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Read/Write one page using dma. Only pages can be read (512 bytes) |
| */ |
| static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read) |
| { |
| int bounce = 0; |
| unsigned long flags; |
| int error; |
| |
| dev->dma_error = 0; |
| |
| /* Set dma direction */ |
| dev->dma_dir = do_read; |
| dev->dma_stage = 1; |
| reinit_completion(&dev->dma_done); |
| |
| dbg_verbose("doing dma %s ", do_read ? "read" : "write"); |
| |
| /* Set initial dma state: for reading first fill on board buffer, |
| from device, for writes first fill the buffer from memory*/ |
| dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY; |
| |
| /* if incoming buffer is not page aligned, we should do bounce */ |
| if ((unsigned long)buf & (R852_DMA_LEN-1)) |
| bounce = 1; |
| |
| if (!bounce) { |
| dev->phys_dma_addr = pci_map_single(dev->pci_dev, (void *)buf, |
| R852_DMA_LEN, |
| (do_read ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE)); |
| |
| if (pci_dma_mapping_error(dev->pci_dev, dev->phys_dma_addr)) |
| bounce = 1; |
| } |
| |
| if (bounce) { |
| dbg_verbose("dma: using bounce buffer"); |
| dev->phys_dma_addr = dev->phys_bounce_buffer; |
| if (!do_read) |
| memcpy(dev->bounce_buffer, buf, R852_DMA_LEN); |
| } |
| |
| /* Enable DMA */ |
| spin_lock_irqsave(&dev->irqlock, flags); |
| r852_dma_enable(dev); |
| spin_unlock_irqrestore(&dev->irqlock, flags); |
| |
| /* Wait till complete */ |
| error = r852_dma_wait(dev); |
| |
| if (error) { |
| r852_dma_done(dev, error); |
| return; |
| } |
| |
| if (do_read && bounce) |
| memcpy((void *)buf, dev->bounce_buffer, R852_DMA_LEN); |
| } |
| |
| /* |
| * Program data lines of the nand chip to send data to it |
| */ |
| static void r852_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) |
| { |
| struct r852_device *dev = r852_get_dev(mtd); |
| uint32_t reg; |
| |
| /* Don't allow any access to hardware if we suspect card removal */ |
| if (dev->card_unstable) |
| return; |
| |
| /* Special case for whole sector read */ |
| if (len == R852_DMA_LEN && dev->dma_usable) { |
| r852_do_dma(dev, (uint8_t *)buf, 0); |
| return; |
| } |
| |
| /* write DWORD chinks - faster */ |
| while (len >= 4) { |
| reg = buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24; |
| r852_write_reg_dword(dev, R852_DATALINE, reg); |
| buf += 4; |
| len -= 4; |
| |
| } |
| |
| /* write rest */ |
| while (len > 0) { |
| r852_write_reg(dev, R852_DATALINE, *buf++); |
| len--; |
| } |
| } |
| |
| /* |
| * Read data lines of the nand chip to retrieve data |
| */ |
| static void r852_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) |
| { |
| struct r852_device *dev = r852_get_dev(mtd); |
| uint32_t reg; |
| |
| if (dev->card_unstable) { |
| /* since we can't signal error here, at least, return |
| predictable buffer */ |
| memset(buf, 0, len); |
| return; |
| } |
| |
| /* special case for whole sector read */ |
| if (len == R852_DMA_LEN && dev->dma_usable) { |
| r852_do_dma(dev, buf, 1); |
| return; |
| } |
| |
| /* read in dword sized chunks */ |
| while (len >= 4) { |
| |
| reg = r852_read_reg_dword(dev, R852_DATALINE); |
| *buf++ = reg & 0xFF; |
| *buf++ = (reg >> 8) & 0xFF; |
| *buf++ = (reg >> 16) & 0xFF; |
| *buf++ = (reg >> 24) & 0xFF; |
| len -= 4; |
| } |
| |
| /* read the reset by bytes */ |
| while (len--) |
| *buf++ = r852_read_reg(dev, R852_DATALINE); |
| } |
| |
| /* |
| * Read one byte from nand chip |
| */ |
| static uint8_t r852_read_byte(struct mtd_info *mtd) |
| { |
| struct r852_device *dev = r852_get_dev(mtd); |
| |
| /* Same problem as in r852_read_buf.... */ |
| if (dev->card_unstable) |
| return 0; |
| |
| return r852_read_reg(dev, R852_DATALINE); |
| } |
| |
| /* |
| * Control several chip lines & send commands |
| */ |
| static void r852_cmdctl(struct mtd_info *mtd, int dat, unsigned int ctrl) |
| { |
| struct r852_device *dev = r852_get_dev(mtd); |
| |
| if (dev->card_unstable) |
| return; |
| |
| if (ctrl & NAND_CTRL_CHANGE) { |
| |
| dev->ctlreg &= ~(R852_CTL_DATA | R852_CTL_COMMAND | |
| R852_CTL_ON | R852_CTL_CARDENABLE); |
| |
| if (ctrl & NAND_ALE) |
| dev->ctlreg |= R852_CTL_DATA; |
| |
| if (ctrl & NAND_CLE) |
| dev->ctlreg |= R852_CTL_COMMAND; |
| |
| if (ctrl & NAND_NCE) |
| dev->ctlreg |= (R852_CTL_CARDENABLE | R852_CTL_ON); |
| else |
| dev->ctlreg &= ~R852_CTL_WRITE; |
| |
| /* when write is stareted, enable write access */ |
| if (dat == NAND_CMD_ERASE1) |
| dev->ctlreg |= R852_CTL_WRITE; |
| |
| r852_write_reg(dev, R852_CTL, dev->ctlreg); |
| } |
| |
| /* HACK: NAND_CMD_SEQIN is called without NAND_CTRL_CHANGE, but we need |
| to set write mode */ |
| if (dat == NAND_CMD_SEQIN && (dev->ctlreg & R852_CTL_COMMAND)) { |
| dev->ctlreg |= R852_CTL_WRITE; |
| r852_write_reg(dev, R852_CTL, dev->ctlreg); |
| } |
| |
| if (dat != NAND_CMD_NONE) |
| r852_write_reg(dev, R852_DATALINE, dat); |
| } |
| |
| /* |
| * Wait till card is ready. |
| * based on nand_wait, but returns errors on DMA error |
| */ |
| static int r852_wait(struct mtd_info *mtd, struct nand_chip *chip) |
| { |
| struct r852_device *dev = nand_get_controller_data(chip); |
| |
| unsigned long timeout; |
| u8 status; |
| |
| timeout = jiffies + (chip->state == FL_ERASING ? |
| msecs_to_jiffies(400) : msecs_to_jiffies(20)); |
| |
| while (time_before(jiffies, timeout)) |
| if (chip->dev_ready(mtd)) |
| break; |
| |
| nand_status_op(chip, &status); |
| |
| /* Unfortunelly, no way to send detailed error status... */ |
| if (dev->dma_error) { |
| status |= NAND_STATUS_FAIL; |
| dev->dma_error = 0; |
| } |
| return status; |
| } |
| |
| /* |
| * Check if card is ready |
| */ |
| |
| static int r852_ready(struct mtd_info *mtd) |
| { |
| struct r852_device *dev = r852_get_dev(mtd); |
| return !(r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_BUSY); |
| } |
| |
| |
| /* |
| * Set ECC engine mode |
| */ |
| |
| static void r852_ecc_hwctl(struct mtd_info *mtd, int mode) |
| { |
| struct r852_device *dev = r852_get_dev(mtd); |
| |
| if (dev->card_unstable) |
| return; |
| |
| switch (mode) { |
| case NAND_ECC_READ: |
| case NAND_ECC_WRITE: |
| /* enable ecc generation/check*/ |
| dev->ctlreg |= R852_CTL_ECC_ENABLE; |
| |
| /* flush ecc buffer */ |
| r852_write_reg(dev, R852_CTL, |
| dev->ctlreg | R852_CTL_ECC_ACCESS); |
| |
| r852_read_reg_dword(dev, R852_DATALINE); |
| r852_write_reg(dev, R852_CTL, dev->ctlreg); |
| return; |
| |
| case NAND_ECC_READSYN: |
| /* disable ecc generation */ |
| dev->ctlreg &= ~R852_CTL_ECC_ENABLE; |
| r852_write_reg(dev, R852_CTL, dev->ctlreg); |
| } |
| } |
| |
| /* |
| * Calculate ECC, only used for writes |
| */ |
| |
| static int r852_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat, |
| uint8_t *ecc_code) |
| { |
| struct r852_device *dev = r852_get_dev(mtd); |
| struct sm_oob *oob = (struct sm_oob *)ecc_code; |
| uint32_t ecc1, ecc2; |
| |
| if (dev->card_unstable) |
| return 0; |
| |
| dev->ctlreg &= ~R852_CTL_ECC_ENABLE; |
| r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS); |
| |
| ecc1 = r852_read_reg_dword(dev, R852_DATALINE); |
| ecc2 = r852_read_reg_dword(dev, R852_DATALINE); |
| |
| oob->ecc1[0] = (ecc1) & 0xFF; |
| oob->ecc1[1] = (ecc1 >> 8) & 0xFF; |
| oob->ecc1[2] = (ecc1 >> 16) & 0xFF; |
| |
| oob->ecc2[0] = (ecc2) & 0xFF; |
| oob->ecc2[1] = (ecc2 >> 8) & 0xFF; |
| oob->ecc2[2] = (ecc2 >> 16) & 0xFF; |
| |
| r852_write_reg(dev, R852_CTL, dev->ctlreg); |
| return 0; |
| } |
| |
| /* |
| * Correct the data using ECC, hw did almost everything for us |
| */ |
| |
| static int r852_ecc_correct(struct mtd_info *mtd, uint8_t *dat, |
| uint8_t *read_ecc, uint8_t *calc_ecc) |
| { |
| uint32_t ecc_reg; |
| uint8_t ecc_status, err_byte; |
| int i, error = 0; |
| |
| struct r852_device *dev = r852_get_dev(mtd); |
| |
| if (dev->card_unstable) |
| return 0; |
| |
| if (dev->dma_error) { |
| dev->dma_error = 0; |
| return -EIO; |
| } |
| |
| r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS); |
| ecc_reg = r852_read_reg_dword(dev, R852_DATALINE); |
| r852_write_reg(dev, R852_CTL, dev->ctlreg); |
| |
| for (i = 0 ; i <= 1 ; i++) { |
| |
| ecc_status = (ecc_reg >> 8) & 0xFF; |
| |
| /* ecc uncorrectable error */ |
| if (ecc_status & R852_ECC_FAIL) { |
| dbg("ecc: unrecoverable error, in half %d", i); |
| error = -EBADMSG; |
| goto exit; |
| } |
| |
| /* correctable error */ |
| if (ecc_status & R852_ECC_CORRECTABLE) { |
| |
| err_byte = ecc_reg & 0xFF; |
| dbg("ecc: recoverable error, " |
| "in half %d, byte %d, bit %d", i, |
| err_byte, ecc_status & R852_ECC_ERR_BIT_MSK); |
| |
| dat[err_byte] ^= |
| 1 << (ecc_status & R852_ECC_ERR_BIT_MSK); |
| error++; |
| } |
| |
| dat += 256; |
| ecc_reg >>= 16; |
| } |
| exit: |
| return error; |
| } |
| |
| /* |
| * This is copy of nand_read_oob_std |
| * nand_read_oob_syndrome assumes we can send column address - we can't |
| */ |
| static int r852_read_oob(struct mtd_info *mtd, struct nand_chip *chip, |
| int page) |
| { |
| return nand_read_oob_op(chip, page, 0, chip->oob_poi, mtd->oobsize); |
| } |
| |
| /* |
| * Start the nand engine |
| */ |
| |
| static void r852_engine_enable(struct r852_device *dev) |
| { |
| if (r852_read_reg_dword(dev, R852_HW) & R852_HW_UNKNOWN) { |
| r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON); |
| r852_write_reg_dword(dev, R852_HW, R852_HW_ENABLED); |
| } else { |
| r852_write_reg_dword(dev, R852_HW, R852_HW_ENABLED); |
| r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON); |
| } |
| msleep(300); |
| r852_write_reg(dev, R852_CTL, 0); |
| } |
| |
| |
| /* |
| * Stop the nand engine |
| */ |
| |
| static void r852_engine_disable(struct r852_device *dev) |
| { |
| r852_write_reg_dword(dev, R852_HW, 0); |
| r852_write_reg(dev, R852_CTL, R852_CTL_RESET); |
| } |
| |
| /* |
| * Test if card is present |
| */ |
| |
| static void r852_card_update_present(struct r852_device *dev) |
| { |
| unsigned long flags; |
| uint8_t reg; |
| |
| spin_lock_irqsave(&dev->irqlock, flags); |
| reg = r852_read_reg(dev, R852_CARD_STA); |
| dev->card_detected = !!(reg & R852_CARD_STA_PRESENT); |
| spin_unlock_irqrestore(&dev->irqlock, flags); |
| } |
| |
| /* |
| * Update card detection IRQ state according to current card state |
| * which is read in r852_card_update_present |
| */ |
| static void r852_update_card_detect(struct r852_device *dev) |
| { |
| int card_detect_reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE); |
| dev->card_unstable = 0; |
| |
| card_detect_reg &= ~(R852_CARD_IRQ_REMOVE | R852_CARD_IRQ_INSERT); |
| card_detect_reg |= R852_CARD_IRQ_GENABLE; |
| |
| card_detect_reg |= dev->card_detected ? |
| R852_CARD_IRQ_REMOVE : R852_CARD_IRQ_INSERT; |
| |
| r852_write_reg(dev, R852_CARD_IRQ_ENABLE, card_detect_reg); |
| } |
| |
| static ssize_t r852_media_type_show(struct device *sys_dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct mtd_info *mtd = container_of(sys_dev, struct mtd_info, dev); |
| struct r852_device *dev = r852_get_dev(mtd); |
| char *data = dev->sm ? "smartmedia" : "xd"; |
| |
| strcpy(buf, data); |
| return strlen(data); |
| } |
| |
| static DEVICE_ATTR(media_type, S_IRUGO, r852_media_type_show, NULL); |
| |
| |
| /* Detect properties of card in slot */ |
| static void r852_update_media_status(struct r852_device *dev) |
| { |
| uint8_t reg; |
| unsigned long flags; |
| int readonly; |
| |
| spin_lock_irqsave(&dev->irqlock, flags); |
| if (!dev->card_detected) { |
| message("card removed"); |
| spin_unlock_irqrestore(&dev->irqlock, flags); |
| return ; |
| } |
| |
| readonly = r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_RO; |
| reg = r852_read_reg(dev, R852_DMA_CAP); |
| dev->sm = (reg & (R852_DMA1 | R852_DMA2)) && (reg & R852_SMBIT); |
| |
| message("detected %s %s card in slot", |
| dev->sm ? "SmartMedia" : "xD", |
| readonly ? "readonly" : "writeable"); |
| |
| dev->readonly = readonly; |
| spin_unlock_irqrestore(&dev->irqlock, flags); |
| } |
| |
| /* |
| * Register the nand device |
| * Called when the card is detected |
| */ |
| static int r852_register_nand_device(struct r852_device *dev) |
| { |
| struct mtd_info *mtd = nand_to_mtd(dev->chip); |
| |
| WARN_ON(dev->card_registred); |
| |
| mtd->dev.parent = &dev->pci_dev->dev; |
| |
| if (dev->readonly) |
| dev->chip->options |= NAND_ROM; |
| |
| r852_engine_enable(dev); |
| |
| if (sm_register_device(mtd, dev->sm)) |
| goto error1; |
| |
| if (device_create_file(&mtd->dev, &dev_attr_media_type)) { |
| message("can't create media type sysfs attribute"); |
| goto error3; |
| } |
| |
| dev->card_registred = 1; |
| return 0; |
| error3: |
| nand_release(mtd); |
| error1: |
| /* Force card redetect */ |
| dev->card_detected = 0; |
| return -1; |
| } |
| |
| /* |
| * Unregister the card |
| */ |
| |
| static void r852_unregister_nand_device(struct r852_device *dev) |
| { |
| struct mtd_info *mtd = nand_to_mtd(dev->chip); |
| |
| if (!dev->card_registred) |
| return; |
| |
| device_remove_file(&mtd->dev, &dev_attr_media_type); |
| nand_release(mtd); |
| r852_engine_disable(dev); |
| dev->card_registred = 0; |
| } |
| |
| /* Card state updater */ |
| static void r852_card_detect_work(struct work_struct *work) |
| { |
| struct r852_device *dev = |
| container_of(work, struct r852_device, card_detect_work.work); |
| |
| r852_card_update_present(dev); |
| r852_update_card_detect(dev); |
| dev->card_unstable = 0; |
| |
| /* False alarm */ |
| if (dev->card_detected == dev->card_registred) |
| goto exit; |
| |
| /* Read media properties */ |
| r852_update_media_status(dev); |
| |
| /* Register the card */ |
| if (dev->card_detected) |
| r852_register_nand_device(dev); |
| else |
| r852_unregister_nand_device(dev); |
| exit: |
| r852_update_card_detect(dev); |
| } |
| |
| /* Ack + disable IRQ generation */ |
| static void r852_disable_irqs(struct r852_device *dev) |
| { |
| uint8_t reg; |
| reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE); |
| r852_write_reg(dev, R852_CARD_IRQ_ENABLE, reg & ~R852_CARD_IRQ_MASK); |
| |
| reg = r852_read_reg_dword(dev, R852_DMA_IRQ_ENABLE); |
| r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE, |
| reg & ~R852_DMA_IRQ_MASK); |
| |
| r852_write_reg(dev, R852_CARD_IRQ_STA, R852_CARD_IRQ_MASK); |
| r852_write_reg_dword(dev, R852_DMA_IRQ_STA, R852_DMA_IRQ_MASK); |
| } |
| |
| /* Interrupt handler */ |
| static irqreturn_t r852_irq(int irq, void *data) |
| { |
| struct r852_device *dev = (struct r852_device *)data; |
| |
| uint8_t card_status, dma_status; |
| unsigned long flags; |
| irqreturn_t ret = IRQ_NONE; |
| |
| spin_lock_irqsave(&dev->irqlock, flags); |
| |
| /* handle card detection interrupts first */ |
| card_status = r852_read_reg(dev, R852_CARD_IRQ_STA); |
| r852_write_reg(dev, R852_CARD_IRQ_STA, card_status); |
| |
| if (card_status & (R852_CARD_IRQ_INSERT|R852_CARD_IRQ_REMOVE)) { |
| |
| ret = IRQ_HANDLED; |
| dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT); |
| |
| /* we shouldn't receive any interrupts if we wait for card |
| to settle */ |
| WARN_ON(dev->card_unstable); |
| |
| /* disable irqs while card is unstable */ |
| /* this will timeout DMA if active, but better that garbage */ |
| r852_disable_irqs(dev); |
| |
| if (dev->card_unstable) |
| goto out; |
| |
| /* let, card state to settle a bit, and then do the work */ |
| dev->card_unstable = 1; |
| queue_delayed_work(dev->card_workqueue, |
| &dev->card_detect_work, msecs_to_jiffies(100)); |
| goto out; |
| } |
| |
| |
| /* Handle dma interrupts */ |
| dma_status = r852_read_reg_dword(dev, R852_DMA_IRQ_STA); |
| r852_write_reg_dword(dev, R852_DMA_IRQ_STA, dma_status); |
| |
| if (dma_status & R852_DMA_IRQ_MASK) { |
| |
| ret = IRQ_HANDLED; |
| |
| if (dma_status & R852_DMA_IRQ_ERROR) { |
| dbg("received dma error IRQ"); |
| r852_dma_done(dev, -EIO); |
| complete(&dev->dma_done); |
| goto out; |
| } |
| |
| /* received DMA interrupt out of nowhere? */ |
| WARN_ON_ONCE(dev->dma_stage == 0); |
| |
| if (dev->dma_stage == 0) |
| goto out; |
| |
| /* done device access */ |
| if (dev->dma_state == DMA_INTERNAL && |
| (dma_status & R852_DMA_IRQ_INTERNAL)) { |
| |
| dev->dma_state = DMA_MEMORY; |
| dev->dma_stage++; |
| } |
| |
| /* done memory DMA */ |
| if (dev->dma_state == DMA_MEMORY && |
| (dma_status & R852_DMA_IRQ_MEMORY)) { |
| dev->dma_state = DMA_INTERNAL; |
| dev->dma_stage++; |
| } |
| |
| /* Enable 2nd half of dma dance */ |
| if (dev->dma_stage == 2) |
| r852_dma_enable(dev); |
| |
| /* Operation done */ |
| if (dev->dma_stage == 3) { |
| r852_dma_done(dev, 0); |
| complete(&dev->dma_done); |
| } |
| goto out; |
| } |
| |
| /* Handle unknown interrupts */ |
| if (dma_status) |
| dbg("bad dma IRQ status = %x", dma_status); |
| |
| if (card_status & ~R852_CARD_STA_CD) |
| dbg("strange card status = %x", card_status); |
| |
| out: |
| spin_unlock_irqrestore(&dev->irqlock, flags); |
| return ret; |
| } |
| |
| static int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) |
| { |
| int error; |
| struct nand_chip *chip; |
| struct r852_device *dev; |
| |
| /* pci initialization */ |
| error = pci_enable_device(pci_dev); |
| |
| if (error) |
| goto error1; |
| |
| pci_set_master(pci_dev); |
| |
| error = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32)); |
| if (error) |
| goto error2; |
| |
| error = pci_request_regions(pci_dev, DRV_NAME); |
| |
| if (error) |
| goto error3; |
| |
| error = -ENOMEM; |
| |
| /* init nand chip, but register it only on card insert */ |
| chip = kzalloc(sizeof(struct nand_chip), GFP_KERNEL); |
| |
| if (!chip) |
| goto error4; |
| |
| /* commands */ |
| chip->cmd_ctrl = r852_cmdctl; |
| chip->waitfunc = r852_wait; |
| chip->dev_ready = r852_ready; |
| |
| /* I/O */ |
| chip->read_byte = r852_read_byte; |
| chip->read_buf = r852_read_buf; |
| chip->write_buf = r852_write_buf; |
| |
| /* ecc */ |
| chip->ecc.mode = NAND_ECC_HW_SYNDROME; |
| chip->ecc.size = R852_DMA_LEN; |
| chip->ecc.bytes = SM_OOB_SIZE; |
| chip->ecc.strength = 2; |
| chip->ecc.hwctl = r852_ecc_hwctl; |
| chip->ecc.calculate = r852_ecc_calculate; |
| chip->ecc.correct = r852_ecc_correct; |
| |
| /* TODO: hack */ |
| chip->ecc.read_oob = r852_read_oob; |
| |
| /* init our device structure */ |
| dev = kzalloc(sizeof(struct r852_device), GFP_KERNEL); |
| |
| if (!dev) |
| goto error5; |
| |
| nand_set_controller_data(chip, dev); |
| dev->chip = chip; |
| dev->pci_dev = pci_dev; |
| pci_set_drvdata(pci_dev, dev); |
| |
| dev->bounce_buffer = pci_alloc_consistent(pci_dev, R852_DMA_LEN, |
| &dev->phys_bounce_buffer); |
| |
| if (!dev->bounce_buffer) |
| goto error6; |
| |
| |
| error = -ENODEV; |
| dev->mmio = pci_ioremap_bar(pci_dev, 0); |
| |
| if (!dev->mmio) |
| goto error7; |
| |
| error = -ENOMEM; |
| dev->tmp_buffer = kzalloc(SM_SECTOR_SIZE, GFP_KERNEL); |
| |
| if (!dev->tmp_buffer) |
| goto error8; |
| |
| init_completion(&dev->dma_done); |
| |
| dev->card_workqueue = create_freezable_workqueue(DRV_NAME); |
| |
| if (!dev->card_workqueue) |
| goto error9; |
| |
| INIT_DELAYED_WORK(&dev->card_detect_work, r852_card_detect_work); |
| |
| /* shutdown everything - precation */ |
| r852_engine_disable(dev); |
| r852_disable_irqs(dev); |
| |
| r852_dma_test(dev); |
| |
| dev->irq = pci_dev->irq; |
| spin_lock_init(&dev->irqlock); |
| |
| dev->card_detected = 0; |
| r852_card_update_present(dev); |
| |
| /*register irq handler*/ |
| error = -ENODEV; |
| if (request_irq(pci_dev->irq, &r852_irq, IRQF_SHARED, |
| DRV_NAME, dev)) |
| goto error10; |
| |
| /* kick initial present test */ |
| queue_delayed_work(dev->card_workqueue, |
| &dev->card_detect_work, 0); |
| |
| |
| printk(KERN_NOTICE DRV_NAME ": driver loaded successfully\n"); |
| return 0; |
| |
| error10: |
| destroy_workqueue(dev->card_workqueue); |
| error9: |
| kfree(dev->tmp_buffer); |
| error8: |
| pci_iounmap(pci_dev, dev->mmio); |
| error7: |
| pci_free_consistent(pci_dev, R852_DMA_LEN, |
| dev->bounce_buffer, dev->phys_bounce_buffer); |
| error6: |
| kfree(dev); |
| error5: |
| kfree(chip); |
| error4: |
| pci_release_regions(pci_dev); |
| error3: |
| error2: |
| pci_disable_device(pci_dev); |
| error1: |
| return error; |
| } |
| |
| static void r852_remove(struct pci_dev *pci_dev) |
| { |
| struct r852_device *dev = pci_get_drvdata(pci_dev); |
| |
| /* Stop detect workqueue - |
| we are going to unregister the device anyway*/ |
| cancel_delayed_work_sync(&dev->card_detect_work); |
| destroy_workqueue(dev->card_workqueue); |
| |
| /* Unregister the device, this might make more IO */ |
| r852_unregister_nand_device(dev); |
| |
| /* Stop interrupts */ |
| r852_disable_irqs(dev); |
| free_irq(dev->irq, dev); |
| |
| /* Cleanup */ |
| kfree(dev->tmp_buffer); |
| pci_iounmap(pci_dev, dev->mmio); |
| pci_free_consistent(pci_dev, R852_DMA_LEN, |
| dev->bounce_buffer, dev->phys_bounce_buffer); |
| |
| kfree(dev->chip); |
| kfree(dev); |
| |
| /* Shutdown the PCI device */ |
| pci_release_regions(pci_dev); |
| pci_disable_device(pci_dev); |
| } |
| |
| static void r852_shutdown(struct pci_dev *pci_dev) |
| { |
| struct r852_device *dev = pci_get_drvdata(pci_dev); |
| |
| cancel_delayed_work_sync(&dev->card_detect_work); |
| r852_disable_irqs(dev); |
| synchronize_irq(dev->irq); |
| pci_disable_device(pci_dev); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int r852_suspend(struct device *device) |
| { |
| struct r852_device *dev = pci_get_drvdata(to_pci_dev(device)); |
| |
| if (dev->ctlreg & R852_CTL_CARDENABLE) |
| return -EBUSY; |
| |
| /* First make sure the detect work is gone */ |
| cancel_delayed_work_sync(&dev->card_detect_work); |
| |
| /* Turn off the interrupts and stop the device */ |
| r852_disable_irqs(dev); |
| r852_engine_disable(dev); |
| |
| /* If card was pulled off just during the suspend, which is very |
| unlikely, we will remove it on resume, it too late now |
| anyway... */ |
| dev->card_unstable = 0; |
| return 0; |
| } |
| |
| static int r852_resume(struct device *device) |
| { |
| struct r852_device *dev = pci_get_drvdata(to_pci_dev(device)); |
| struct mtd_info *mtd = nand_to_mtd(dev->chip); |
| |
| r852_disable_irqs(dev); |
| r852_card_update_present(dev); |
| r852_engine_disable(dev); |
| |
| |
| /* If card status changed, just do the work */ |
| if (dev->card_detected != dev->card_registred) { |
| dbg("card was %s during low power state", |
| dev->card_detected ? "added" : "removed"); |
| |
| queue_delayed_work(dev->card_workqueue, |
| &dev->card_detect_work, msecs_to_jiffies(1000)); |
| return 0; |
| } |
| |
| /* Otherwise, initialize the card */ |
| if (dev->card_registred) { |
| r852_engine_enable(dev); |
| dev->chip->select_chip(mtd, 0); |
| nand_reset_op(dev->chip); |
| dev->chip->select_chip(mtd, -1); |
| } |
| |
| /* Program card detection IRQ */ |
| r852_update_card_detect(dev); |
| return 0; |
| } |
| #endif |
| |
| static const struct pci_device_id r852_pci_id_tbl[] = { |
| |
| { PCI_VDEVICE(RICOH, 0x0852), }, |
| { }, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl); |
| |
| static SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume); |
| |
| static struct pci_driver r852_pci_driver = { |
| .name = DRV_NAME, |
| .id_table = r852_pci_id_tbl, |
| .probe = r852_probe, |
| .remove = r852_remove, |
| .shutdown = r852_shutdown, |
| .driver.pm = &r852_pm_ops, |
| }; |
| |
| module_pci_driver(r852_pci_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>"); |
| MODULE_DESCRIPTION("Ricoh 85xx xD/smartmedia card reader driver"); |