| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/bus/arm,integrator-ap-lm.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Integrator/AP Logic Module extension bus |
| |
| maintainers: |
| - Linus Walleij <linusw@kernel.org> |
| |
| description: The Integrator/AP is a prototyping platform and as such has a |
| site for stacking up to four logic modules (LM) designed specifically for |
| use with this platform. A special system controller register can be read to |
| determine if a logic module is connected at index 0, 1, 2 or 3. The logic |
| module connector is described in this binding. The logic modules per se |
| then have their own specific per-module bindings and they will be described |
| as subnodes under this logic module extension bus. |
| |
| properties: |
| "#address-cells": |
| const: 1 |
| |
| "#size-cells": |
| const: 1 |
| |
| compatible: |
| items: |
| - const: arm,integrator-ap-lm |
| |
| ranges: true |
| dma-ranges: true |
| |
| patternProperties: |
| "^bus(@[0-9a-f]*)?$": |
| description: Nodes on the Logic Module bus represent logic modules |
| and are named with bus. The first module is at 0xc0000000, the second |
| at 0xd0000000 and so on until the top of the memory of the system at |
| 0xffffffff. All information about the memory used by the module is |
| in ranges and dma-ranges. |
| type: object |
| |
| required: |
| - compatible |
| |
| required: |
| - compatible |
| |
| examples: |
| - | |
| bus@c0000000 { |
| compatible = "arm,integrator-ap-lm"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0xc0000000 0xc0000000 0x40000000>; |
| dma-ranges; |
| |
| bus@c0000000 { |
| compatible = "simple-bus"; |
| ranges = <0x00000000 0xc0000000 0x10000000>; |
| /* The Logic Modules sees the Core Module 0 RAM @80000000 */ |
| dma-ranges = <0x00000000 0x80000000 0x10000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| serial@100000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x00100000 0x1000>; |
| interrupts-extended = <&impd1_vic 1>; |
| }; |
| |
| impd1_vic: interrupt-controller@3000000 { |
| compatible = "arm,pl192-vic"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x03000000 0x1000>; |
| valid-mask = <0x00000bff>; |
| interrupts-extended = <&pic 9>; |
| }; |
| }; |
| }; |
| |
| additionalProperties: false |