| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings |
| |
| description: | |
| The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller |
| IP with Allwinner\'s own PHY IP. It supports audio and video outputs |
| and CEC. |
| |
| These DT bindings follow the Synopsys DWC HDMI TX bindings defined |
| in bridge/synopsys,dw-hdmi.yaml with the following device-specific |
| properties. |
| |
| maintainers: |
| - Chen-Yu Tsai <wens@csie.org> |
| - Maxime Ripard <mripard@kernel.org> |
| |
| properties: |
| "#phy-cells": |
| const: 0 |
| |
| compatible: |
| oneOf: |
| - const: allwinner,sun8i-a83t-dw-hdmi |
| - const: allwinner,sun50i-h6-dw-hdmi |
| |
| - items: |
| - enum: |
| - allwinner,sun8i-h3-dw-hdmi |
| - allwinner,sun8i-r40-dw-hdmi |
| - allwinner,sun50i-a64-dw-hdmi |
| - const: allwinner,sun8i-a83t-dw-hdmi |
| |
| reg: |
| maxItems: 1 |
| |
| reg-io-width: |
| const: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| clocks: |
| minItems: 3 |
| items: |
| - description: Bus Clock |
| - description: Register Clock |
| - description: TMDS Clock |
| - description: HDMI CEC Clock |
| - description: HDCP Clock |
| - description: HDCP Bus Clock |
| |
| clock-names: |
| minItems: 3 |
| items: |
| - const: iahb |
| - const: isfr |
| - const: tmds |
| - const: cec |
| - const: hdcp |
| - const: hdcp-bus |
| |
| resets: |
| minItems: 1 |
| items: |
| - description: HDMI Controller Reset |
| - description: HDCP Reset |
| |
| reset-names: |
| minItems: 1 |
| items: |
| - const: ctrl |
| - const: hdcp |
| |
| phys: |
| maxItems: 1 |
| description: |
| Phandle to the DWC HDMI PHY. |
| |
| phy-names: |
| const: phy |
| |
| hvcc-supply: |
| description: |
| The VCC power supply of the controller |
| |
| ports: |
| $ref: /schemas/graph.yaml#/properties/ports |
| |
| properties: |
| port@0: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: | |
| Input endpoints of the controller. Usually the associated |
| TCON. |
| |
| port@1: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: | |
| Output endpoints of the controller. Usually an HDMI |
| connector. |
| |
| required: |
| - port@0 |
| - port@1 |
| |
| required: |
| - compatible |
| - reg |
| - reg-io-width |
| - interrupts |
| - clocks |
| - clock-names |
| - resets |
| - reset-names |
| - phys |
| - phy-names |
| - ports |
| |
| if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - allwinner,sun50i-h6-dw-hdmi |
| |
| then: |
| properties: |
| clocks: |
| minItems: 6 |
| |
| clock-names: |
| minItems: 6 |
| |
| resets: |
| minItems: 2 |
| |
| reset-names: |
| minItems: 2 |
| |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| /* |
| * This comes from the clock/sun8i-a83t-ccu.h and |
| * reset/sun8i-a83t-ccu.h headers, but we can't include them since |
| * it would trigger a bunch of warnings for redefinitions of |
| * symbols with the other example. |
| */ |
| #define CLK_BUS_HDMI 39 |
| #define CLK_HDMI 93 |
| #define CLK_HDMI_SLOW 94 |
| #define RST_BUS_HDMI1 26 |
| |
| hdmi@1ee0000 { |
| compatible = "allwinner,sun8i-a83t-dw-hdmi"; |
| reg = <0x01ee0000 0x10000>; |
| reg-io-width = <1>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, |
| <&ccu CLK_HDMI>; |
| clock-names = "iahb", "isfr", "tmds"; |
| resets = <&ccu RST_BUS_HDMI1>; |
| reset-names = "ctrl"; |
| phys = <&hdmi_phy>; |
| phy-names = "phy"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdmi_pins>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| endpoint { |
| remote-endpoint = <&tcon1_out_hdmi>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| /* Cleanup after ourselves */ |
| #undef CLK_BUS_HDMI |
| #undef CLK_HDMI |
| #undef CLK_HDMI_SLOW |
| |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| /* |
| * This comes from the clock/sun50i-h6-ccu.h and |
| * reset/sun50i-h6-ccu.h headers, but we can't include them since |
| * it would trigger a bunch of warnings for redefinitions of |
| * symbols with the other example. |
| */ |
| #define CLK_BUS_HDMI 126 |
| #define CLK_BUS_HDCP 137 |
| #define CLK_HDMI 123 |
| #define CLK_HDMI_SLOW 124 |
| #define CLK_HDMI_CEC 125 |
| #define CLK_HDCP 136 |
| #define RST_BUS_HDMI_SUB 57 |
| #define RST_BUS_HDCP 62 |
| |
| hdmi@6000000 { |
| compatible = "allwinner,sun50i-h6-dw-hdmi"; |
| reg = <0x06000000 0x10000>; |
| reg-io-width = <1>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, |
| <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>, |
| <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>; |
| clock-names = "iahb", "isfr", "tmds", "cec", "hdcp", |
| "hdcp-bus"; |
| resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>; |
| reset-names = "ctrl", "hdcp"; |
| phys = <&hdmi_phy>; |
| phy-names = "phy"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdmi_pins>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| endpoint { |
| remote-endpoint = <&tcon_top_hdmi_out_hdmi>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| ... |
