blob: 6953c958ff7c8d4fe1150bf1608bb9eddfb45f93 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek MT65xx Pin Controller Device Tree Bindings
maintainers:
- Sean Wang <sean.wang@kernel.org>
description: |+
The Mediatek's Pin controller is used to control SoC pins.
properties:
compatible:
enum:
- mediatek,mt2701-pinctrl
- mediatek,mt2712-pinctrl
- mediatek,mt6397-pinctrl
- mediatek,mt7623-pinctrl
- mediatek,mt8127-pinctrl
- mediatek,mt8135-pinctrl
- mediatek,mt8167-pinctrl
- mediatek,mt8173-pinctrl
- mediatek,mt8516-pinctrl
reg:
maxItems: 1
pins-are-numbered:
$ref: /schemas/types.yaml#/definitions/flag
description: |
Specify the subnodes are using numbered pinmux to specify pins.
gpio-controller: true
"#gpio-cells":
const: 2
description: |
Number of cells in GPIO specifier. Since the generic GPIO
binding is used, the amount of cells must be specified as 2. See the below
mentioned gpio binding representation for description of particular cells.
mediatek,pctl-regmap:
$ref: /schemas/types.yaml#/definitions/phandle-array
minItems: 1
maxItems: 2
description: |
Should be phandles of the syscfg node.
interrupt-controller: true
interrupts:
minItems: 1
maxItems: 3
"#interrupt-cells":
const: 2
required:
- compatible
- pins-are-numbered
- gpio-controller
- "#gpio-cells"
allOf:
- $ref: "pinctrl.yaml#"
patternProperties:
'-[0-9]+$':
type: object
additionalProperties: false
patternProperties:
'pins':
type: object
additionalProperties: false
description: |
A pinctrl node should contain at least one subnodes representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and input
schmitt.
$ref: "/schemas/pinctrl/pincfg-node.yaml"
properties:
pinmux:
description:
integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are
defined as macros in <soc>-pinfunc.h directly.
bias-disable: true
bias-pull-up:
description: |
Besides generic pinconfig options, it can be used as the pull up
settings for 2 pull resistors, R0 and R1. User can configure those
special pins. Some macros have been defined for this usage, such
as MTK_PUPD_SET_R1R0_00. See dt-bindings/pinctrl/mt65xx.h for
valid arguments.
bias-pull-down: true
input-enable: true
input-disable: true
output-low: true
output-high: true
input-schmitt-enable: true
input-schmitt-disable: true
drive-strength:
description: |
Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA,
etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments.
required:
- pinmux
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/mt8135-pinfunc.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
syscfg_pctl_a: syscfg-pctl-a@10005000 {
compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
reg = <0 0x10005000 0 0x1000>;
};
syscfg_pctl_b: syscfg-pctl-b@1020c020 {
compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
reg = <0 0x1020C020 0 0x1000>;
};
pinctrl@1c20800 {
compatible = "mediatek,mt8135-pinctrl";
reg = <0 0x1000B000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
pins-are-numbered;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
i2c0_pins_a: i2c0-0 {
pins1 {
pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
<MT8135_PIN_101_SCL0__FUNC_SCL0>;
bias-disable;
};
};
i2c1_pins_a: i2c1-0 {
pins {
pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
<MT8135_PIN_196_SCL1__FUNC_SCL1>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
i2c2_pins_a: i2c2-0 {
pins1 {
pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
bias-pull-down;
};
pins2 {
pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
bias-pull-up;
};
};
i2c3_pins_a: i2c3-0 {
pins1 {
pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
<MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins2 {
pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
<MT8135_PIN_36_SDA3__FUNC_SDA3>;
output-low;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins3 {
pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
<MT8135_PIN_60_JTDI__FUNC_JTDI>;
drive-strength = <32>;
};
};
};
};